Klay installs the Teraflex 4" Short Arm Lift Kit on a 2015 Jeep JK.
Пікірлер: 41
@yetanother4x4channel227 жыл бұрын
Excellent video. Good camera placement, good lighting, good narration. All the steps covered with smooth flowing edits. Excellent.
@luisbarrios47173 жыл бұрын
I just ordered the 4 inch lift from teraflex. this video give me confidence in stalling it myself.
@427vot6 жыл бұрын
Thanks for the assist! Excellent video!
@matbax698 жыл бұрын
This saved me !! Thanks heaps !
@HavocOffroad8 жыл бұрын
+matbax69 We appreciate it! Thank you!
@cowill86748 жыл бұрын
loved video, great step by step, but the drive shaft wasn't mention, what was that drive shaft attachment for and what was the use for it. thanks and all your vidz are helpful for DIY
@HavocOffroad8 жыл бұрын
+Marco Williamson It is the JK Rzeppa High Angle Factory Replacement CV Kit, it allows you to retain your factory driveshaft while also having a lift higher than 3". There is a video coming soon for that parts install! If you would like to order it call the experts at 18554606800.
@rael6_4wd4 жыл бұрын
I just purchased the same Terra Flex lift (but it’s a 3 inch) for a 2017 Wrangler Sport. (2 door) Do I still need the Drive Shaft Joint, and Exhaust Extension? Thanks, great video.
@badkarma22697 жыл бұрын
Great Video!
@keithlea68046 жыл бұрын
Best vid ever
@DarylRosenberg017 жыл бұрын
Went to your website and Jeep is not an option when looking under suspension. There is no way to look at the kit in this video
@HarryMcKinney8 жыл бұрын
What size wheels/tires are on the Jeep at the end of the video?
@HavocOffroad8 жыл бұрын
+Harry McKinney They are 37" tires on 22" wheels. Thanks for the question!
@jimlayhey19655 жыл бұрын
will i need wheel a alignment on my jeep jk if i upgrade to taraflex sport front control arms my old control arms are mint no bends 1 tear old
@andrewdygas7967 жыл бұрын
What size tires are you running on that's jeep?
@brycecarnes53917 жыл бұрын
What is the front bumper on the jeep?
@russziller40338 жыл бұрын
I have a 2016 Jeep Willys. While is stalling the back spacers (thing that looks like a nipple) i also installed the factor isolator over it which was in the manual. The nipple never made a sound when it was seated but its center. However, I notice when I look under the jeep the nipple I would think should be at a 90 degree angle but it’s not. It’s at a 110 degree angle and it moves around. I have put 100 miles on the jeep since. Is this an issue or will these nipples just sit like that when all the weight of the jeep is on it? Can you please help with a valid answer??
@HavocOffroad8 жыл бұрын
Would you be able to take pictures and email them?
@russziller40338 жыл бұрын
Did you ever get the pics i sent?
@ElectronicWorld1018 жыл бұрын
How much would a shop charge to install a lift of this kind?
@HavocOffroad8 жыл бұрын
For best pricing give us a call at 352-414-7643
@vinishshetty80558 жыл бұрын
So basically you install a 4 short arm lift it wont effect the factory wheel base? and there is no need to chop or grind and alter the factory jeep.will 35 tires look good with that kit?
@HavocOffroad8 жыл бұрын
Wheel base will be retained when using adjustable control arms, caster can also be adjusted. You will need to find a alignment shop that will be willing to make control arm adjustments. 35" tire will fit no problem.
@vinishshetty80558 жыл бұрын
thanks
@HavocOffroad7 жыл бұрын
You are welcome Vinish!
@AhmedShawkyAAST7 жыл бұрын
what are the lengths of the 8 control arms for a 4 Door jk 4" lift?
@HavocOffroad7 жыл бұрын
Hi Ahmed! Great question. The control arms are adjustable. The upper front control arms need to be set to 19.5" to start with. The lower front control arms need to be set at 23.75" to start with. The upper rear control arms need to be set at 18.3750" to start with The rear lower control arms need to be set at 20.3750" to start with. The reason I say "to start with". These arms are adjustable so depending on wheel, tire and drive shafts the customer is using these control arms can be dialed in to fit his/her needs. Caster and wheel base are adjustable.
@AhmedShawkyAAST7 жыл бұрын
Havoc Offroad I had no problems installing the front control arms with these settings but when the rear ones were installed with the given settings 18.375 & 20.375 (46.7 cm & 51.7 cm) the springs weren't standing straight, they were forming a C shape... so I added 5 cm to each rear control arm to make the spring standing straight... is it correct what I am doing?
@HavocOffroad7 жыл бұрын
I would not adjust them that far "out". that is almost 2 inches. Having a slight C shape in the spring is common. Please contact Tera Flex for more detailed answer. They are a pleasure to deal 801-713-3314
@reneluquez60472 ай бұрын
Rear control arms lengths for a 2 doors is the same for a 4 door ? Upper and lower
@bill36416 жыл бұрын
Must be a hoot working on something that's never been off road.
@pietermaharia30808 жыл бұрын
why my Robicon lean after liftkit 4 inch? Does something goes wrong?
@HavocOffroad8 жыл бұрын
In which direction is it leaning?
@pietermaharia30808 жыл бұрын
+Havoc Offroad : it's lean to right side. I am at Indonesia, driver side are on the right place
@HavocOffroad8 жыл бұрын
It's possible that the lift kit was installed incorrectly.
@pietermaharia30808 жыл бұрын
+Havoc Offroad : please give me advice, cause after liftkit I do a lot correction and it's goes same
@HavocOffroad8 жыл бұрын
Please start by measure all four springs to see which one is leaning the most. Also look at the rear springs to see if the are arching or bending.
@lxstangs8 жыл бұрын
having a lift is way better ! Hahaha
@HavocOffroad7 жыл бұрын
We agree!
@russziller40338 жыл бұрын
I got your email but I can't respond to it. Can you send me an email that I can respond to? I have the pics