How To Get Wrinkles Out Of Vinyl Wrap Edges - TESBROS

[@jasonferguson6308]

Perfect, to the point with no extra fluff in the video. Much appreciated!

[@infinityphotorob]

This is a really good explanation. I just did the side of my truckbed. Everything was smooth as hell until I got to the very back bottom corner. I just did not stretch film at all had wicked bunching. Next side I am going to do similar but when I get to that bottom 1/4 I am going to try to stretch like crazy around this corner and not wait to get to the end to deal with it. The upper corner because it was in my face I did pull up and around really hard before I even had the side down. I need to do the same on the bottom.

[@davethomas2375]

Thanks for a video that's spot on very helpful as I am on my first attempt doing carbon motorbike petrol tank.

[@tesbros]

You got this!

[@yurienperez5703]

OMG A MILLION THX FOR THAT DEMO. I have been having this issue for ever on my sports bike. Thanks so much for this video!!!

[@tesbros]

Glad to help!!

[@LibertyCrue]

Awesome video I love to see in debt details like this and small steps that people don’t explain that make a huge difference!🎉

[@sigsire]

I learned so much within one minute of this video compared to so much presenters who drone on and on

[@tesbros]

Happy to help!

[@AaronAndino]

This was so helpful, thank you. Very well explained.

[@Beek88]

Yall always make it look easy!! Great video thanks for the tips!

[@BruunStuff]

Awesome video. Thank you for the tips. Keep 'em coming!

[@Gamen4Bros]

Great video! I will try this out

[@calebandres6374]

I give up can even get mine to keep sticking on mine… it’s great stuff if you like doing a paint change as your driving down the road and covering the windshield of the car behind you! using this stuff makes a high quality paint job a walk in the park

[@dbell41888]

Appreciate if you ever have to do a dually fender on a pickup. Has to be one of the most difficult to do correctly. Peace!

[@austins.6741]

Definitely harder than it looks! Good video demo!

[@tesbros]

Takes some practice but you’ll get it!

[@jdiaz1374]

Very cool!

[@jefffinke8225]

Is that avery? I can not get vvivid or aura to not wrinkle doing that. Its constantly pull back up, heat try again, and creates sanding.

[@tesbros]

This is 3M 2080, but very similar to Avery. Hmm. If those are thicker films like chrome or texture, it'll be much harder to do this technique.

[@jefffinke8225]

@@tesbros good to know. Thanks

[@tesbros]

@@jefffinke8225 if it’s thicker, I would hold it out loosely from the panel while you squeegee. See if that helps

[@MegaTapdog]

been trying to wrap my 65 year old body in gold wrap and still have wrinkles, but i’ll keep trying. Thanks for the video.

[@tesbros]

Good luck! Message us on Twitter or Instagram if you want to send photos of issues we may be able to help you with.

[@haywardmorant8188]

Hi love the video Im having thiz problem trying to wrap my moms casket. Any pointers on how to start my laying process? It seems like i keep running into the example of your video

[@tesbros]

Make sure you glass everything out, meaning stretch all the material to fit all corners before squeegeeing anything

[@blipblop92]

Guy make it easy. I still got a bunch of wrinkles after i totally destoyed my fiest attempt 😂

[@tesbros]

Takes practice! 😅

[@madness_-pd4ik]

Got any tips I'm struggling so much I can't seem to "glass it" like everyone says

[@jacobvega8515]

I have an old pick up truck that has round small windows in the back how would I wrap that specific section

[@tesbros]

Without seeing it, that's a bit hard to answer, but what you would probably do is lay film over the panel, including the window. Glass it out. Install around it, then heat the window concave and use a wrap glove to push the material into the valley

[@pass-my-test]

Hi. I've added a square vinyl patch on the roof of my car and there are a few areas along one edge which won't stick down. Can you help?

[@tesbros]

hard to help without seeing but did any water or debris get under there?

[@dpz1985dp]

Is there anything else i can use if i dont own a squeegee?

[@tesbros]

You could try a plastic card like a credit card. To avoid scratching the vinyl, wrap the card in a soft cloth or use a piece of felt. You can get some squeegees off Amazon for pretty cheap though!

[@jayflackoo5029]

What state are you located in?

[@tesbros]

We’re in Chattanooga, TN!

[@jminkvihubyb]

What about if you have excess? I'm wrapping my rear fender on a mustang and it wraps the brake lights slightly. I'm at a point where there's a bunch of excess. It all looks smooth for the 5' from the door to the back but where it curves down, there's about a 3" x 4" area of wrap that is sticking up that I can't seem to lay down at the very end of where I need to cut. I'm not sure if I explained it well enough, but if u have the time, do u have any advice? Should I just stretch it more little by little? I'll have the same problem on the other side of the car if I can't figure it out

[@tesbros]

Would you mind sending us photos on either Instagram, Facebook or Twitter @teslabros ? This will help me give you the best answer!

[@yurienperez5703]

I've been having that same issue.

[@blade_lavish8719]

Bro u gotta be using a different brand or maybe it’s a different temp I’m using 3m 2080 at 30 F and nah bro I was doing that and it wrinkled up so I heated it and pulled on it

[@tesbros]

We are using the same brand here. But 30 degrees F? That's really cold for vinyl and will make it brittle and not very pliable. Try to wrap around room temp.

[@blade_lavish8719]

@ ok sounds good

[@cccboarding]

Heat n stretch

[@lamarcraven2314]

You definitely are not about to BS. You get right to the point and then show them exactly how to do it. You’re doing a great job. Keep up the good work.🫡

[@tesbros]

Thanks for the support!