TEST Hitachi DH26PC 830W/3.2J Vs Bosch GBH 2-28 DFV 850W/3.2J

SHOP DH26PC:www.servina.net/rachni-mashin...
SHOP GBH 2-28 F: www.servina.net/rachni-mashin...
Twitter: / servinatools
Facebook: / servinatools
Параметри Hitachi DH26PC 830W/3.2J:
- Мощност: 830 W
- Напрежение: 230V 50Hz
- Обороти на празен ход: 0 - 1.100 мин-1
- Удари в минута: 0 - 4.300 мин-1
- Енергия на удара: 3.2 J
Параметри Bosch GBH 2-28 DFV 850W/3.2J:
- Мощност: 850 W
- Напрежение: 230V 50Hz
- Обороти на празен ход: 0 - 900 мин-1
- Удари в минута: 0 - 4000 мин-1
- Енергия на удара: 3.2 J

[@yurij512]

Справа был человек, которого и близко нельзя подпускать к перфораторам.

[@asd_95]

Он прямо на него лёг!

[@sergesjl3362]

Согласен

[@sanfis7672]

Таких пенделем нужно гнать с любой бригады, такой только ущерб нанесёт

[@MrShinta786]

both same power, but i work in construction for 15 years now. Bosch ALWAYS break. Hitachi good quality

[@Wanderer777jk]

Hitachi was great back then, they never really got much attention in EU tho, but to say that Bosch will always break is wrong... This model is made in Germany, its very durable. I have all my Bosch models made in Germany or Switzerland and they never brake, I cant say anything for models made elsewhere, China, Mexico.... But I dont buy those.

[@-PORK-CHOP-]

@@Wanderer777jk My German made Bosch did break, my Chinese Makita is still going after many years

[@Wanderer777jk]

@@-PORK-CHOP- Depends on how do You and how often use it... Everything brakes in the end but Chinese stuff much often. And also depends on if You're telling the truth. Bottom line is, Chinese made stuff, no matter the brand, should be avoided

[@-PORK-CHOP-]

​@@Wanderer777jk Why would I not tell the truth, I know Chinese stuff is shit it always has been and always will be because they don't know anything about quality control, I have over 60 power tools, older stuff is mostly made in Japan / Germany, unfortunately EVERYTHING is made in China nowadays from the big tool manufacturers, I have a lot of newer Bosch tools and they are nowhere near as good as the older Bosch tools I have,. The new Bosch have a lot of issues with the power switches burning out as they are probably using some shitty Chinese made switches in them, this problem has affected 3 x impacts, 1 x cordless drill, 1 x 240v router, 1 x reciprocator, 1 x 240V drill and 1 x jigsaw, I have had 1 rotating lasers fail , 1 laser receiver just fell apart as the glue holding it together gave away It's only been used maybe 30 times and always stored in the protective case, my Leica rotating laser is still going strong after 6 years of use, I have had 12 x 18V Bosch batteries die within 2 years of use, the newer Bosch 240v or 18V is no more reliable than any of the Chinese made rubbish on the market, I don't abuse the tools they are used for my Carpentry business, I regret purchasing new Bosch cordless, as the Bosch tools die I will be purchasing DeWalt or Makita.

[@user-zu2cb3ds5h]

@@Wanderer777jk HIKOKI HITACHI ..

[@robertofernandez188]

Belleza de máquinas.

[@jksinghteotia1415]

Powerful tool for professional works

[@zhosealdo4265]

НИКОГДА НЕ КОММЕНТИРУЮ, НО НА ХИТАЧИ ЧИСТЫЙ ОТМОРОЗ ТЕСТИРОВАЛ,

[@edivaldoferreiradeoliveira9614]

Não se pode forçar o martelete. Se não vc perde parte do impacto ..fora isso ,ele precisa de um espaço na pra do impacto... Só lembrando que isso é uma furadeira com um função auxiliar de martelete...forte abraço.. Obs: ele trabalha sozinho..basta vc apoia-lo ande deseja furar ou quebrar..não force ...só apoie

[@edivaldoferreiradeoliveira9614]

Seria não ora do impacto..😁😁😁

[@sharmapukar]

The guy holding Hitachi is putting his extra effort. Are testing the tools or your effort???

[@-PORK-CHOP-]

Yes I think he was trying too hard

[@Robert_Matysiak]

You are right! This is the way for destroying sds hammer drill.

[@asandro5312]

Gostei 👍🏾

[@manekin1437]

ok, zaraz będę

[@Ermakfirs]

купили бы два перфа в один день,попользовались бы с годик на стройке с одинаковой нагрузкой,и тогда можно посмотреть и выводы сделать.зачем сравнивать новый и б/у,на хитачи чувак решил массой своего тела бур в бетон загнать,а это не правильно.

[@Wledis]

Ну это смотря в какие руки инструмент отдать

[@ucchung3050]

Cái nào mạnh hơn?

[@user-rs5xg8nf8n]

у 2-28 подвеска! нет нужды давить! от вибры сильно спасает!..

[@user-zu2cb3ds5h]

HIKOKI - Hitachi - the best..

[@DanielVLC]

NÃO PRECISA TANTA FORÇA PARA FURAR COM ESSAS MÁQUINAS!!

[@PauloRoberto-gj3oh]

Tambem acho os caras estão apoiando todo peso do corpo.fura so com uma leve presao nao sabem usar ferramentas

[@zinovkinpro]

Братан справа ты зря не лёг на Хитачи 🤣

[@germanymusical22]

clarament se ve como le carga al hitachi pa aumentar perforacion bosch 100%confiable

[@isayesilyurt6420]

hıtachı perfect

[@asd_95]

Однозначно Bosch!!

[@zubayribnabdumalik183]

молодцы вам лайк

[@alexandr600]

Зачем так давить на перфораторы при сверлении ?!

[@4k-643]

по тому что если не давить, то хитачи проиграл бы)))

[@Wledis]

Как будто на Бош никто не давил.

[@khainguyen4207]

@@4k-643 that right!

[@Hindustan24tak]

Hitachi best hai

[@AlexK-ft8mc]

бедный хитачи.

[@abdurrahmancmc2605]

ikiside güzel Biri alman Digeri japon

[@ozanturk8493]

Hitachi hikoki❤

[@user-td5ob7yu9p]

Не понятно только зачем правому тестуну подали питание в инструмент? Он и так своей "могучестью" отверстий бы набурил.

[@66smooth66]

„Fachkräfte“ 😄

[@marckatz1202]

nicht soviel drücken !!!Sondern Maschine Arbeiten lassen!!!!!

[@user-st2li3sd5i]

Убийцы перфораторов...

[@BARMALEEVKA]

ДА... УЖ......

[@normanmares5723]

Como no va a ser más rápido el Hitachi casi se monta en el y Bosch va casi solo como debe de ser

[@arbeliroz]

My conclusion- rusian guys love testing electric stuf

[@dezsonagy8357]

Nagyon jó videó lett volna, de nem fer a teszt szerintem! Teljes képpel kellett volna mutatni mindent, és egy erővel tolni. Látszatra a bosch jobb volt, hitachi kínozva volt.

[@dedywirabuana]

hitachi has cheaper price than bosch

[@margotchabanon4759]

v47

[@user-if8bw5fe3l]

А о чем видео то?😂

[@aleksinelektro-pro1896]

О том, что Хитачя - чуть лучше. А по "приятности" в руках при работе - таки Бош - помойка !

[@MINYAD1]

Зачем так давить на перф? Он не в себе?

[@user123familia2]

Ваш язык на русский похож. Братья славяне.

[@billyg.7032]

You are not using these tools properly . Why do you push so hard? There is no need for that.

[@niccolobin3482]

Infact all this only for a video. Professional tools with not professional workers! Probably these tools are death the day after :)

[@Thorjaeger]

fail test, wrong used !

[@aecrim085]

yes, also i would like to see witch one handles better when meeting steel bar in the concrete... both of them have kickback stop??? it's most crucial test, will the operator end-up in hospital, or no?

[@AS-ui3df]

Идиотские тесты)))

[@valeriysergienko9151]

Растолкуйте людям в чем смысл вашего чудо-теста? (не ломайте перфораторы)

[@zaferhanbozkurt9676]

Kırıcı matkaba öküz gibi yüklenilmez kendi vuruş gücü yeterlidir. Ayrıca bosch eski Hitachi yeni !

[@huyphan4312]

Bosch is best