Testing a Bucket Mounted Hay Spear From VEVOR!

#kubota #vevor
Amazon Link: amzn.to/3Tlsp4u
Email: [e-mail]
mailing address:
261 Little Caney Ridge
Coeburn VA, 24230

[@samuelscragg7052]

I’ve purchased several items from Vevor and have been well satisfied with there quality and workmanship.

[@Dan-qy1rg]

My first tractor had a homemade loader with a bucket and my brother-in-law made a point for it which was bolted on, real cumbersome. That one would work better for sure, for those that need a point it would be a good choice. Have a good evening!

[@khtractors]

Yes it’s a good option! Thanks for watching

[@bennykennedy1786]

Good review. i think this would be very handy for those with front loaders who do not like the trouble of removing the bucket to mount a hay spear. Very easy to attach and remove. i like that feature the most.

[@khtractors]

Yes it a simple and effective design. Thanks

[@MitchellPack-zw4vu]

Great demo Ben,your honesty is appreciated

[@khtractors]

I appreciate that!

[@philbootsma6669]

Good morning Ben, I had a bucket mounted fork like this for several years before I got dedicated bale forks for my skid loader and tractor. They can fill a need in the circumstances you mentioned; buckets being in separate locations etc. I should mention that I live in an area where the first 4X5 bale I ever saw was from my own baler 2 years ago. I unloaded semi's full of 5X6 rounds weighing in excess of 1500 lbs at times. This was back in my previous life as a dairyman. Frankly I may be lucky to be alive. The tractor was a Super M weighed down and with fluid filled rears, but it had a tricycle front end. Our ground is as flat as your kitchen table, but a bump with a bale that far out front is not good. I have seen too many of these on tractors that are too small with bucket edges that are too weak picking up bales that are too heavy. For light and infrequent use by a cautious operator with a more than adequate tractor, maybe, but.... I hate to be "that guy" on this thread, but have to mention the walk under the raised bucket. I ain't the safety police and have horror stories to tell of my own carelessness; but please be safe out there. I enjoy your content and don't want it marred by tragedy. All in good humor and with the best intentions.

[@khtractors]

I get the walking under the loader but at the same time it spends hours on end suspended in the air while working and doesn’t fall. Sure a freak accident could happen though. Thanks for watching

[@rtundlt1]

I use quite a few items from VEVOR. So far all of it has worked well and been affordable. I use their 20 gallon oil drain pan, very large ultrasonic cleaner big enough to put my tractor carbs in, top creeper for servicing my 7.3 in my F-Super Duty, and a few other trinkets. Keep posting these great and informative videos.

[@khtractors]

Good to hear!! Thanks for watching

[@PapaJack68]

Great concept and functionality. Nice demonstration!

[@khtractors]

Thank you!

[@jonathanjackson928]

You put on a good demonstration. There will be someone watching your video that needs that very thing. I like that you give the pro’s and cons on everything you show. Hope you have a great weekend!

[@khtractors]

I appreciate that!

[@curtisking2962]

Ben, you are doing a great job at promoting Vevor. Thanks to you showing their products, i ordered a paint sprayer from them, i received it yesterday. I did a good amount of research on it and think it will serve my needs. I guess what I'm saying is, if it weren't for you, l probably would not have considered there brand. Thanks for another good video. Have a good weekend.

[@khtractors]

That’s good to hear, hopefully it serves you well!

[@joutdoorsmen23]

Awesome looking product Ben, I would have to agree with you that this would be the ticket for some that don’t have a quick attachment bucket, especially for the price, God Bless

[@khtractors]

Appreciate you watching!!

[@Tonnsfabrication]

Lots of older tractors still in circulation don't have the skid steer quick attach, I refurbished a bucket spear for a woman at a near by horse farm, heck I charged her $250 to do the work now you can buy a new one for the same price. They was loading bales on a trailer with it way out in the back 200. Come to think of it, she's still got my chain and binder, I need to go get that.

[@khtractors]

Good point! Thanks for watching

[@harlonlantz4094]

I am sure your new hay spear will come in handy this hay season.Nice looking piece of equipment Ben.Take care,be safe and have a blessed day.🚜👍👏❤️🙏

[@khtractors]

Thanks, you too!

[@farmingforfunandprofit940]

We have 4 tractors with loaders( 5045, 5075 M, 2 5115 Ms), 2 -Backhoe loaders, (110 , 310D), A 510 Kubota Wheel loader and about 5 or 6 complete Spear assemblies both Tapered and Thru bolt.. with JD 500, Skid steer. and Global plus the Kubota hydraulic side pin quick attachment, .. I fabricated one simular in the early 1980s to fit my BUSHOG loader when I was in the Dairy Business.......

[@khtractors]

@@farmingforfunandprofit940 thanks for watching!

[@farmingforfunandprofit940]

No need to Thanks------- The reason I watch is see if what is shown matches what is said,,,,, Quite a lot of "Fertilizer" is sread on Useless Tube

[@HumbleHaymakers]

Good video. FWIW - I put a similar spear on my MF50’s loader and the additional distance across the depth of the bucket caused a lot of stress on the loader frame and cylinder brackets. I won’t be using it this year. Best of luck haying in 2024…👍

[@khtractors]

The bucket on that loader seems pretty deep though compared to most. Thanks for watching

[@aafarm1652]

Pretty nice bucket spear! Need one of those sometimes so may have to look into buying one!

[@khtractors]

Thanks for watching!!

[@THETATERGUNSHOOTER]

It wasn’t a vevor brand but we use to use 2 of them on each side of the bucket to move 2 bales at a time.

[@khtractors]

I wondered if that might would work. Thanks for watching

[@THETATERGUNSHOOTER]

Oh yeah as long as you have enough tractor lol.

[@FabbedFun]

Looks like a winner to me!

[@khtractors]

Thanks buddy!

[@willardnicholson8026]

Be good for emergency great video buddy 👍

[@khtractors]

Thanks 👍

[@samuelscragg7052]

I’ve built a couple of these type of hay spears for smaller tractors and older tractors. The issues are; one you can see the bale for the bucket, and binder or the ratchet will come lose after a couple of pick ups, and the tighter you make the binder you starter to cave the bucket in. And if your stacking bales in a barn you will need someone to spot for you seeing becomes a guessing game. Until you learn where the bale is into relationship to the bucket. I don’t think you will be happy with this type of spear there nothing wrong with the product itself it’s just extremely difficult to use

[@khtractors]

Yeah I’ll probably not use it much but might use the spears out of it. Thanks for watching

[@midwayfarms]

Great video today God bless

[@khtractors]

Thank you! You too!

[@jamesberg3106]

Bear hug it eh? Love that term. Hoping it doesn’t damage the bucket

[@khtractors]

It won’t damage a Kubota built bucket. Other brands maybe. Thanks for watching

[@joeyrector1015]

It seems work pretty dog gone good if you ask me. Once I get a tractor. I'm going to get me one

[@khtractors]

Sounds good! Thanks for watching

[@joeyrector1015]

You're welcome

[@raywhite1442]

Ben it looks like if won't do an operation like yours more grevation than it's worth

[@khtractors]

Thanks for watching

[@dwalke26]

It looks well built compared to some of the spears I’ve seen that’s of similar design. If somebody don’t move a ton of hay, these are not a bad way to go.

[@khtractors]

Thanks for watching

[@codymccauly349]

Hi

[@khtractors]

Hello!

[@codymccauly349]

Are you ready for summer this year

[@khtractors]

@@codymccauly349 sure am! How about you?

[@codymccauly349]

Can you push a video tonight or not

[@khtractors]

@@codymccauly349 new one tomorrow. I have upload it tonight.