TESTING REAR SUBFRAME BUSHINGS x CONDOR SPEED SHOP

Get yourself some Condor bushings here: www.condorspeedshop.com/
MY SHOP - HOLD FAST USA STEERING WHEELS
holdfast-usa.com/
BLACK RIFLE COFEE (CODE: MICAHDIAZ for 15% off): www.blackriflecoffee.com/
STREET FIGHTER LA (CODE: MicahDiaz): streetfighterla.com/
MAXSHINE (CODE: Micah20 for 20% off): www.maxshinecarcare.com/
FOLLOW US ON INSTAGRAM
@micah_diaz_
@sirnick71
@hannahydiaz
@holdfast_usa
@properfabworks
@builtbyproper
@proper_e82
@ayehugoo
@proper_steez
@dirty.36
Music by:
Otis McDonald
www.otismacmusic.com/
#BMW #E46 #DRIFTING #BUDGETDRIFTCAR

[@MickBergin]

Mint video mate, I have a 4door e46 323i, just pulled subframe out reinforced mounts, changed to 3.91 diff & 320d axles, just putting it back together so excited to drive it. Cheers from Australia

[@zidewayz]

Why 320d axles ?

[@MickBergin]

@@zidewayz the deisel axles are solid and not hollow , apparently less likely to break

[@dakotajanzen192]

What year is it? I have the same one in ‘99 and apparently it uses e36 brakes lol so my seems legit garage dual calliper bracket doesn’t work until I get e46 brakes. Do you have the same problem?

[@RaggedyRacingGarage]

I paid $100 for my e46 like 2 years ago manual swapped it and I beat the crap out of it! 240k miles

[@Paul.mcdouble]

You should try 3.0 cams they fit in the 2.5

[@rogerpozzi1060]

Looks like big fun was had

[@natehr4048]

All the clutch kicks 😂

[@Garagehiroko]

I have a 2.8 with a 3.46 and i love it. Keep rippin and love the videos man!

[@WR250RONNIE]

Same diff as me but i have a 325i

[@OMCbuilt]

Hey Micah, question about the SLR setup. I just installed the ultra on my e46 and was curious what you set your lollipop to as a base setting? (All the way in?, four turns out from all the way in, etc) It's winter here so I can't go and test out different settings and I want to figure out how much to trim my front bumper. A few turns of the lollipop makes a big enough difference in terms of bumper interference. This is on a daily drifter not a comp car FYI Thanks

[@dillonaron14]

I’m not Micah but on my e36 drift car I removed the nut and ran the threads all the way in Then I put the nut on the out side where the threads are exposed.

[@OMCbuilt]

@@dillonaron14 seems like the front wheels would interfere with the headlights if I did that!

[@dillonaron14]

@Old Man Clemens it will require some trimming of the bumper it’s personal preference. Personally I like a lot of caster.

[@blaznmax8877]

That clutch pedal was like . What I ever do to u man

[@gonzoe123]

Micha, a friend of mine has a manual E60 530i for $2500. It sounds like it has a dead cylinder when cold, after the engine warms up it runs smooth. What do you think the problem could be? What would some recommended mods?

[@MicahDiaz]

Idk man if I could diagnose cars through text I’d be a millionaire. So many factors. Try to find the dead cylinder. Then try and figure out what’s cause the dead cylinder

[@imurofaca6430]

E46 Gang

[@jasonthorn716]

Sup Micah, do you know if the flares you have fit the wagon rear?

[@davidegrossi9269]

Are condor bushings compatible with a 320ci e46?

[@solotov5239]

Yes they are

[@lamenamedude]

is that a square wheel set up or whats the wheel specs? 18x9.5?

[@FaworDrifts]

Your car looks def. a bit faster but to be ohnest still weak and even this 330 on 3,45 is not so powerfull as it should be. I don;t know on what tires were you running but my compact on 3,38 and 225/17's rips second like crazy and needs few kicks to link longer curves ON 3RD. Look on my onboards Micah if you would to. I personaly think, that your 325 should be running like this 330...I would diagnose it further.

[@patrykkowalski6]

if you or anyone else finds what it is ... im struggling like that aswell on straight/dyno its all good but when drifting its so gutless when it wasn't before (i did 3 event and i could drift in 3rd and now same tires and no power to drift even 2nd gear)

[@nathanielreubel983]

Yes man do that 3.0 swap

[@ReignofStorms]

>.< as a stock boi this hurt my soul lol. What does a 3.64 diff come out of a X3?

[@MicahDiaz]

Keep in mind this is a 325. The 330 is a way better motor

[@wthomasw2]

@@MicahDiaz Do you plan on swapping a 330 in this 325 chassis?

[@Chattsteezy]

I believe that was an M3 ratio

[@patchedupdemon7104]

I thought it was a 3ltr,my guy just swap in a 3.0 asap,they have forged crank and rods,so turbo it and safley run 350-400hp on pump.

[@movementonwheels]

I would say take some weight off your e46. I wouldn’t bother with a 3.0 I would get a 5.3 budget swap even a 4.8