Woah dude this is the exact set up I plan on building thank you very much!
@framesmagazine11 күн бұрын
Kevin, what’s the camera that you have and how is it positioned when you are sitting straight and looking at the monitor? I can see that you are still looking into the camera. Where do you have it mounted? Thank you.
@KevinKolbe11 күн бұрын
The camera on my desk is a Canon M6 Mark II with a Sigma 16mm lens. For this video I was playing with a Viltrox 23mm lens. Camera is on a Small Rig desk mount, which in this video I had to the side. Now I have it over my monitor.
@Found-in-FranceАй бұрын
Hi Kevin. Having found and subscribed to your channel yesterday, I am now enjoying more of your tips and tricks down here in the South of France. Out of interest, why don't you every film outside? I'm soooooo tempted by the DJI Osmo Pocket 3 Creator Combo as it's so discrete and packable but it's quite an investment for me. Also what tripod would you use outside? An octopus type or ...... ?
@KevinKolbeАй бұрын
For me right now, it's easier to shoot in my office. As far as tripods, here's a list of most of my gear including tripods (way too many but some good ones there): amzn.to/3LlRdoH
@matthewpateofficial9 ай бұрын
Great video! I’m trying to setup something like this for my review and unboxing videos. Do you have a long cable for the osmo pocket 3? I want to do a front facing cam and an overhead with the osmo pocket
@KevinKolbe9 ай бұрын
Appreciate that. I'm planning on trying it for different set-ups too like an overhead camera. Regarding the cable. The one it comes with is really short. Since it takes a USB-C cable I just grabbed another one I have, which is longer, and used it. My gut is you could probably grab one off Amazon.
@matthewpateofficial9 ай бұрын
@@KevinKolbe does it need to just be a cable that has data transfer or something specific? Thanks for the reply. And the voiceover was pretty hilarious. Keep up the great work.
@KevinKolbe9 ай бұрын
Probably. I've got several USB-C cables from different things and haven't really looked into which one is which.
@mark.mahorney7 ай бұрын
I have dji action cam 4 and got the DJI mic before I got the streamer x, you can plug in the DJI receiver with an XLR adapter, but could also get just a single rode transmitter to pair with the X
@KevinKolbe7 ай бұрын
@@mark.mahorney thanks for the tip.
@Richard_Broom_Photography9 ай бұрын
Oops...pressed 'thumbs down by mistake' and then pressed thumbs up but it won't count. Finger trouble. But a very interesting video. I've been looking at the Streamer X and wondering whether to buy or not. Your review (still watching) is very useful.
@KevinKolbe9 ай бұрын
Oh well, you know what they say "thumbs happen..." 😂 Thanks for watching.
@LEVITMARKENTАй бұрын
Hi,are you using both cameras through the streamer x?
@KevinKolbeАй бұрын
Nope. You can only use one at a time.
@LEVITMARKENTАй бұрын
@@KevinKolbe Thanks
@TransplantHelper2 ай бұрын
I bought a streamer x off eBay for $71 steal of a deal.
@KevinKolbe2 ай бұрын
That IS a great deal!
@mundamopeeАй бұрын
did u connect the Osmo pocket 3 via USB to the computer or the Rode streamer X... Thats what was confusing for me ... Can you clarify please. Thanks
@KevinKolbeАй бұрын
Connected to the computer. The Rode Streamer X is HDMI only.
@mundamopeeАй бұрын
@@KevinKolbe perfect! just the answer I was looking for. I was debating whether I should buy the rodecaster video... I think it is too much of an investment for me... I can get away with the streamer for now... great video BTW
@KevinKolbeАй бұрын
Appreciate it. Yeah the Rodecaster Video does look cool but WOAH the price! The Rode StreamerX is fine but can be quirky at times. Make sure you do all the updates!
@mundamopeeАй бұрын
@@KevinKolbe Thanks for the heads up... I have heard that the streamer has a hum noise ... any other quirks u could point me to would be great...
@KevinKolbeАй бұрын
Never had that issue. Sometimes it just doesn't show the camera. Not often but a few times.
@cebo918Ай бұрын
what are u using to switch camera lens
@KevinKolbeАй бұрын
Recorded that with Ecamm. It integrates with the Elgato Stream Deck but for this video I just did with hot keys on my keyboard.
@michaelsevillerealestate977Күн бұрын
I changed my voice as well… haha… how do you undo it?
@KevinKolbeКүн бұрын
Whichever pad you clicked, just click it again. I had to use headphones to know if it was back to normal or not.
@michaelsevillerealestate977Күн бұрын
@@KevinKolbe thank you… I’m such a newby… haha
@waltjennette9 ай бұрын
Wait…you’re actually on to something!
@KevinKolbe9 ай бұрын
Finally! 😁
@waltjennette9 ай бұрын
@@KevinKolbe I’m seeing more and more content of people using the Pocket to actually stream and do stuff with and I never looked at it like that!
@KevinKolbe9 ай бұрын
Gotcha. I have yet to be disappointed or even surprised by what I can do with this and I know there's still a lot I'm learning about it too.
@techbyfinne9 ай бұрын
I've had nothing but problems with the Streamer X when it comes to video. Among other things changes fps, cannot deliver 4k in Quicktime on M1 Mac Mini, buggy Unify software. Have to restart constantly, settings disappear. Had no problems with the Elgato Cam Link 4K. Røde support has not been of much help, promises and promises but nothing happens. Have lots of Røde products, but this is an alpha product that was sent to the market way too early.
@KevinKolbe9 ай бұрын
This is the second one I've tried. Think I mentioned in the video the first one kept interfering with my keyboard and I never found a workaround. Decided to give it another shot. So far so good but haven't tired the QT recording. Thanks for sharing!
@KevinKolbe9 ай бұрын
Wanted to circle back with an update. I just did a test recording in Ecamm, StreamYard, OBS, Tella, and Quicktime. The only one that crapped out was QuickTime. For some reason half way through it slowed down the video/audio then sped back up again. All the others I listed looked and sounded great!
@techbyfinne9 ай бұрын
@@KevinKolbe Thanks for reply :) Same experience, plus you can't record in 4k in QT. I've never had the problem with the Elgato Cam Link 4K, so it's definitely a Røde problem. A problem that can and should be solved. 3 months since I started a support case with them... :)
@techbyfinne9 ай бұрын
@@KevinKolbe forgot: the problem with QT was not there at the beginning, so they are adding errors :)
@KevinKolbe9 ай бұрын
Yeah, my Cam Link has been solid but I wanted to see if I could streamline it all. For me since I have so many recording options, including in-camera, I'm okay if QT doesn't work well. Bummer that Rode can't help you.