Led TV MCU (basic soldering techniques)

[@Somanathan-hj7ge]

Sir,breath holding job😊,for an expert ,grass also a tool, super work done with out big lens,watch makers glass, awasome sir very best.😊

[@tevzTVTevatronics]

Thanks 👍

[@tedamlon3185]

Very nice idol, thanks for sharing this video

[@tevzTVTevatronics]

Thank you too

[@michaelluckym2288]

thanks to all of your videos

[@nishantharohana6048]

You are a genius, no doubt. 👍 from Srilanka.

[@eduardobrigola6273]

Thanks....for all you've been uploading....

[@mohauthejane8055]

I love your program i love to fix tv's and computers

[@desmondngwenze616]

Thankyou Sir for this information

[@k.delectronics3966]

Great video. I think applying flux in the procedure of the desoldering would help you a lot and also help to not thermal stretching the ic so much. Theres many cheap replicas flux on China market that are great.

[@tevzTVTevatronics]

Great point!

[@rojanpajalla9403]

What could be the best brand for resin flux?

[@josephroberts6027]

@@rojanpajalla9403 AMTECH 559

[@Fardeenfarwest]

Am new on your channel since Last week. But am learning a lot from you thanks lot. Good work. Change an ic from a main board it takes a lot of time. And need good tools. Like magnifying glass to see the small things. A blower Flux desoldering copper. And a good detective technician like you also. ❤️ ❤️ ❤️ From Mauritius. Have a nice day.

[@StSharena]

sir,I watch every one of your videos and learn. Thank you

[@tevzTVTevatronics]

Glad to hear that

[@srujanjagannadha]

Great work sir.replace IC perfectly sir

[@zachariepayant3864]

Gud job Tevz

[@josechauca8175]

Excelente video. Muchas gracias por su aporte.Siempre veo sus videos, saludos desde Perú.

[@tevzTVTevatronics]

Muchas gracias

[@gabrielcuevas5837]

Increíble!, saludos amigo.

[@victorrinz6856]

Greet

[@youssefsmati1614]

Good nice and pro job ..

[@yasserfathy2092]

رائع احسنت

[@marfelgonzales8494]

Very nice master.

[@rubincelestin5998]

Excelent 🎥 sr.

[@JunPVlog]

Watching here sir sending full support salamat sa pag share

[@tevzTVTevatronics]

Thanks for watching

[@electrolatif]

Great jobs

[@zarzarel1910]

Excellent presentation, one for me...if you allow me a question for you: What is the adjusted value of the hot air flow that you use to replace the MSD6306 (I read in one of your answers to a comment that the temperature is 420 degrees)? I watched on YT the way in which an integrated circuit with many pins and...those who have done this operation (in most of them, with material possibilities that far exceed mine) use a pre-heating device to help the hot air blower...I see that you have the ability to strip and without pre-heating the circuit, this is due to the experience accumulated over time, I think... in my country, at prices of approximately 150 euros (US dollars), I can purchase the Gordak, Baku 702B or equivalent brands... I'm going to try to buy such a workstation, just for experiments and free time using defective electronic boards from old HDDs or from defective internet network boards... I admit that this technique is beyond me and I'm not even looking at it of course you will thank you for your kindness and help

[@tevzTVTevatronics]

My hot air station is not digital so I only guessing the temperature . I'm in this work about 35 year atlases. These hot air are not included to my tools. When a tv becomes like a computer circuit now, so I need lean that hot air how to manage it. Thats why I don't use hot air im my other's video because I'm not expert on it. Sorry for the bad English, by the way thanks for your support.

[@zarzarel1910]

@@tevzTVTevatronics My respect for you, professor, and thank you for the lessons I follow on YT, with your kindness...my "English" is not that advanced either...I also use Google translate many times... important are the indications and recommendations that I understand more easily, thanks to your way of conveying them... and, I saw that not the fact of having the "latest tools" help (such as the pre-heating plate or the latest "news" of multimeters, most of the time very expensive) are important in this field, much more important are the experience and inventiveness of the way to solve a malfunction...not to mention the theoretical and practical knowledge acquired in so many years of your activity in this field... my big problem is the close-up "view" of the small components and the distance required to use the soldering gun in that narrow space... I follow you with pleasure and respect, because I have a lot to learn from you. .thank you, on a this way, for everything you make known on YT, about your daily activity and I wish you good health and satisfied customers in the new year 2023... from Romania, Eastern Europe, thank you for all your lessons

[@dkstudio6822]

mantap..kawan,.

[@jawadjani2331]

sir you are very nice teacher

[@tevzTVTevatronics]

Many many thanks

[@jawadjani2331]

sir hamain panal ki repairing main mushkil hoti hain

[@ataribasamson3553]

You do all keep it up

[@edtechph5444]

Nice video sir watching ED TECH PH

[@tevzTVTevatronics]

So nice

[@stanisawmuszynski8978]

Perfekcyjna robota,

[@rojanpajalla9403]

You always have a reserve junk IC 😅 I hope i will be great a technician like you!

[@practice3851]

Many thanks.

[@إيهابابوهيبهابوهيبه]

الله ينور عليك

[@zarzarel1910]

Professor...what kind of magnifying glass do you use in this video? I mean, I'm interested in the magnification factor and, above all, what kind of device it comes from...can it be bought from a store? I reviewed this with pleasure and interest video lesson..thanks for your kindness and help

[@tevzTVTevatronics]

I only use smartphone.

[@geraldofreneo1729]

Bos tevz Pinoy k? Dito Kaba s pina baka pwede k dayuin bos?

[@tevzTVTevatronics]

@@geraldofreneo1729 dito ako sa laoag city.

[@JovitTechPH]

watching sir tevs

[@zacksparrow5943]

What temperature you used to blow the plcc ic i want to know that sir air and heat

[@tevzTVTevatronics]

About 420 °C

[@zacksparrow5943]

@@tevzTVTevatronics thanks sir have a good day

[@mohamadarahman6243]

What is the temperature hot air gun

[@tevzTVTevatronics]

350

[@mdarafat7689]

Good

[@tevzTVTevatronics]

Thanks

[@bineshchauhan8713]

What is in other hand while you soldring. at 10:45 sec

[@tevzTVTevatronics]

lens

[@สุพัฒน์มองทัง]

👍👍👍👍👍👍👍👍👍👍🏾

[@MrNash-nu3gs]

Baka sir my tanggal ka jan xbox power supply... E feature mo nga sir.. Salamat

[@tevzTVTevatronics]

kzbin.info/door/80-lX89VA4h2VBe6J1IAUwfeatured TRy mo mag request yang channel na yan, sya gumagawa ng x box.

[@JorgeGutierrez-js4lq]

Hi Tevz . how much did you charge from that work.

[@tevzTVTevatronics]

About $30 parts and labor.

[@JorgeGutierrez-js4lq]

@@tevzTVTevatronics thank you mate. 👍

[@josephroberts6027]

@@tevzTVTevatronics May I inquire as to where you are? Comparing prices with the US. That job would be probably very close to $100 around here. But with everybody throwing things out there are very few people who work on them anymore.

[@tevzTVTevatronics]

@@josephroberts6027 32 inches led is about $150 brand new. If $100 to repair it, It's better to throw it in the garbage and buy a new one. Im from the Philippines. 32 inches led tv costs only about $30 to repair here.

[@MekumbaVictor-s8m]

Please which country are you

[@tevzTVTevatronics]

Philipines

[@beladn710]

Hello TEVZ Qu'est-ce que tu utilises pour dessouder le processeur ?

[@tevzTVTevatronics]

Hello, Sorry I can't understand your language.

[@beladn710]

@@tevzTVTevatronics Hello TEVZ What do you use to desolder the processor? is that hot air?

[@tevzTVTevatronics]

@@beladn710 yes I use hot air

[@junselectronics7691]

Good job lakay.agpasuroak tu man kasatno ag english😅

[@tevzTVTevatronics]

Hehe saan siyk deta ag sasau

[@michaelcossacks]

how can u solder tiny chip legs without a microscope

[@nilocosmeph6082]

Newbie is watching master

[@edtechph5444]

Naligaw ka sir

[@cheniththeunula2110]

Why are you not use fluxs remove ic?

[@tevzTVTevatronics]

It can be remove without flux.

[@hipolitoruiz9911]

Espanol

[@HaiderAli-qn6qx]

No past

[@algator55]

Tevs according to other KZbin channels you are soldering that chip incorrectly, the pins must be aligned with the planets and only a flux capacitor can be used sparingly 🤣

[@tevzTVTevatronics]

hAHAHAHA

[@prossynakimera6975]

😢

[@platinumautolocksmiths]

Clean down the pads to across to avoid the pads joining 😮

[@emadodeh309]

لماذا ازلتم التعليق

[@hardwaretools1428]

You don't have the art of welding as you should