TFT DISPLAY PARAMETERS | TEVERUN FIGHTER 11,11+ & SUPREME | James Angelo TV | Vlog 146

TFT DISPLAY SETTINGS.
pre program settings means allowing the rider to customize the settings depends on demand performance of their electric scooter.
This video is important specially if you are beginners, this video will guide you to understand the proper settings and how to operate the tft display correctly.
TFT display means thin film transistor
This type of display will give you a full details of information and status of your electric scooter.
first lets talk about the parts:
this is the TFT DISPLAY the TFT DISPLAY CONTROL BUTTON the NFC switch and the nfc card..
To turn on the tft display
first you need to TAP the NFC card to the NFC switch. you will heart a beep sounds.
wait for the nfc card twice beep then press the power button.
In TFT DISPLAY CONTROL BUTTON you will see the power button,M or mode button + or up button and minus or down button.
In TFT display once you turn on you will see
at the upper part is
BATTERY PERCENTAGE
BATTERY VOLTAGE
MOTOR INDICATION like single or dual motor
Clock information
in the middle part you will see the
MOTOR POWER INDICATOR
SPEEDOMETER
SPEED INDICATION km/h or mph
Gear LEVEL INDICATOR from ECO mode to gear level 1-5
at the down part you will see the
MOTOR STATUS on or off
Controller Current indicator
ERROR CODE indicator
TEMPERATURE indicator.
Once you press the mode button LETTER M here in tft display button control
the lower part of display will change to
MILEAGE Information.
Total mileage:
Trip
once you press the break lever the red color will appear this is for brake sensor.
once you long press the plus button the green light color will appear. this means headlight is on and the light level of display will change.
once you long press the plus and minus button together the AVERAGE SPEED / MAX SPEED / TRIP and TIME will be reset but not the total MILEAGE of your scooter.
Lets proceed to parameters settings:
PRESS letter M Twice and in this you will see the
LCD BRIGHTNESS
UNIT SYSTEM
AUTO OFF
CLOCK
START PASSWORD
INFORMATION
ADVANCE SETTINGS
FACTORY SETTINGS
WHEEL DIAMETER
VOLTAGE
EXIT
LCD BRIGHTNESS LEVEL 1-5 To select just press M or Power button to cancel then Plus or minus button to adjust the parameters.
UNIT SYSTEM: usually we are using KMPH but in other country like US or europeans they are using Mph to change Press then press plus or minus once you comfirm the adjustment press M then exit
AUTO off : this settings will automatically turn off your electric scooter once you didn’t use or you forgot to switch off the display. default time is 10 mins. if you want to change Press M the up or down then press M to comfim then press power button to exit.
Clock press M the press up and down the input correct time then press exit
start password : in this if you want more safety you can input the password so that no one can change the settings or can use you electric scooter.
information in this you will see the
AVRAGE SPEED
MAX SPEED
TRIP
ODO
HARDWARE VERSION
SOFTWARE VERSION
then exit
advance settings in advance settings once you press the M button it will ask the password. enter your password, the default password you will see in manual of your electric scooter. so after you enter it will show
SPEED LIMIT 100%
CRUISE MODE on or off
in this cruise control mode is advisable only in open area or long distance travel.
but do not turn on in crowded areas or uphill rides this will burn your controller
and in main display you will see the cruise control indicator once it turn on
ABS OFF or ON in this i would suggest off
SPEED MAGNET the standard motor magnet is 30
ASSIST PARAMETER
in this if you want to adjust the power or performance of your scooter depends on gear level like gear 1 this is performance
until gear 5
EXPORT when the switch is on the speed is limited to 25% and non zero start
Temperature protection
ZERO START OR KICK START.
in this i would suggest if beginners use kick start. because this electric scooter has a high torque power. for your safety.
#teverun #TFT

[@stevenbai4700]

thanks for sharing. I also just bought Fighter11+, many functions will not be used, your video is very useful for beginners, thanks again

[@JamesAngeloTV]

thanks bro appreciated 🤝🙏

[@greibonifacio]

Waiting for your review of the 7260R. Ride safe Bossing

[@JamesAngeloTV]

hoping also bro that i can review that scooter

[@stefankrcmar3619]

hello angelo, I have one question, I have a teverun fighter 11, I'm interested in what is the difference when it is set to 72V - 60V and 48V?

[@Fredhobby]

Great video mate, We need a little help, please... we have the new Teverun Fighter Mini, and weirdly it came without TFT but only with the MINIMOTORS small Screen, any idea if we can swap this TFT screen in your video or Fighter Mini screen to work? Or do wea need to change the controller as well? I have the BT App working though. your help will be much appreciated, hate this small minimotors display LOL. Thank you.

[@JamesAngeloTV]

the controller is differt if you want to change in tft need to change controller and wirings

[@Fredhobby]

@@JamesAngeloTV Thank you! ok, so what controller do we need for this TFT screen in your Video? can you send the link? Thanks

[@Fredhobby]

@@JamesAngeloTV Thank you! ok, so what controller do we need for this TFT screen in your Video? can you send the link? Thanks

[@JamesAngeloTV]

@Fredhobby in terms of link bro i don’t have because im directing to supplier, but in aki express there is a lot items there

[@Fredhobby]

@@JamesAngeloTV thank you

[@MisterSoul2008]

Good info about the display! It's new for me. What is it actually like to drive the Teverin in the rain? That's definitely supposed to happen....😉 Is the scooter then junk or can it stand it? Thanks!

[@JamesAngeloTV]

honestly i drive my scooter in rain, around 15mins travel from my work, nothen happen.

[@MisterSoul2008]

@@JamesAngeloTV Hello! Have you ever replaced new wheel bearings for the Teverun Fighter 11 plus? Mine make strange grinding noises and squeaking noises. But what size do you order? Do you have experience with that? Thank you!

[@waynecameron8253]

Hi Angelo, The blade GT+comes with 40amp controllers,and I am curious if it would be safe for me to change the default current settings on the TFT in Assist 5 for the front and rear controllers/motors from 40amperes to 45 or 50 or 60? 60 is the maximum value which far exceeds the amp rating of the controllers in the GT+ and in my opinion too much for the controllers to handle. I am worried that permitting more current than the controllers could safely handle would literally fry them. If I decide to increase ampere values to an amount higher than the factory default numbers,how much do you recommend I raise them without damaging the controllers or motors? In my opinion,45amps would be the threshold for the GT+,but going higher will be a disaster. Let me know what you think.

[@JamesAngeloTV]

im not sure bro if it will reached upto 45A i mean in settings option, if so yes 45A that woul be fine. only the thing is it will give high torque power but it will less the range due to high current

[@TomasLeba]

Hi Angelo. Please did you know how to fix bug non funktional AVG speed at tachometer Supreme app version?

[@JamesAngeloTV]

what happen bro

[@andrewbarratachea]

I have the 11+, but for some reason, Gear 1 is not working. I have tried to adjust Assist 1, but it still does not function. What do you think it could be?

[@JamesAngeloTV]

yes gear one not working make it gear 2

[@andrewbarratachea]

@JamesAngeloTV how do I fix it?

[@nurigustavo]

Hi Angelo. I bought a Blade GT yesterday. The scooter does not work the accelerator. The TFT screen works 100%. I assembled the equipment myself and only connected a cable-connector since all the other connections came together. Any suggestion or test to perform. Maybe it's lack of knowledge. any help thanks

[@JamesAngeloTV]

maybe the speed limiter is connected

[@ericshiah]

nurigustavo did you ever figure a solution?

[@nurigustavo]

kzbin.info/www/bejne/hqSWon2hjdeFgs0

[@TOMAR2310]

I bought mine Teverun 11+ yesterday and the maximum speed is 50 km/h.. u know why?

[@JamesAngeloTV]

maybe it set as mph or you ride it not fully charge

[@marcocicko262]

Hi!, Is there a way to disable EABS completely?

[@JamesAngeloTV]

honestly even i off EABS still working,

[@FWise-et3cb]

Please why is my teverun fighter supreme showing break in the display while driving... The moment it does that, it's stops accelerating

[@JamesAngeloTV]

did you press the break? if not check the hall sensor connection

[@FWise-et3cb]

@@JamesAngeloTV when i apply break and leave it, it will still be displaying that I'm still holding the break mean while I'm already pressing the throttle button it will not respond I will just be there on the road waiting for it to move...

[@АЛЕКСЕЙ-к8ч4ж]

Hi, In fact, I am concerned about the problem with blunting at speeds over 40 km/h. When you pull the trigger after rolling , the scooter slows down at the beginning and only then begins to develop power again

[@JamesAngeloTV]

maybe you on the eabs

[@АЛЕКСЕЙ-к8ч4ж]

only the throttle stick is pressed@@JamesAngeloTV

[@АЛЕКСЕЙ-к8ч4ж]

you go coasting, you pull the trigger of the gas and sudden braking and then acceleration @JamesAngeloTV

[@АЛЕКСЕЙ-к8ч4ж]

firmware 2.2.13

[@JamesAngeloTV]

your version is connected to the app?

[@ЮрийВенедиктович-м2п]

Hi, how much does 11+35ah weigh in kg? It's just that the weight is different on each site.

[@ЮрийВенедиктович-м2п]

Without rounding, if possible. There is a restriction in my country (scooters over 35 kg cannot ride on sidewalks).

[@JamesAngeloTV]

38 kg bro

[@ЮрийВенедиктович-м2п]

@@JamesAngeloTV thanks

[@i.a.4067]

I bought a teverun fighter 11+, I can't connect to the application. Bluetooth doesn't find it. How can you fix it?

[@JamesAngeloTV]

is the display have logo of bluetooth

[@i.a.4067]

@JamesAngeloTV thanks for the reply. No, it hasn't. How can I turn it on?

[@JamesAngeloTV]

@i.a.4067 it means yoir scooter is not app version

[@haroldsayson8606]

Pede p po bang ma upgrade ang teverun fighter 10? Nasa 40kph lng kasi full speed nya..

[@JamesAngeloTV]

san bro location mo

[@blueinthesead3charter844]

Sir pwede mag tanong.. meron me es2 ninebot error 10.. change n me dashboard and main board.. same p din eh.. bk matulungan mo poh ako

[@JamesAngeloTV]

brande new ba pinalit mo bro

[@peterbarsony8024]

Hallo My Teverun 11 has error 3 who ist problem please

[@jhunternz]

Watching this because my Blade 10 has a TFT display haha

[@JamesAngeloTV]

yes you can get an idea in that video bro🤝🍻

[@jhunternz]

The mileage 'Trip Info' reset with the + & - button together is useful, didn't know that one before.

[@JamesAngeloTV]

i didn’t mention also in this video Long press M it will be single motor vice versa

[@scooter_don8569]

in mine i don't have start password or advanced setting maybe it is a different firmware?

[@JamesAngeloTV]

that is supreme right? or maybe with bluetooth

[@scooter_don8569]

@@JamesAngeloTV yes supreme ,the plant told me the now have this function only in app, so you know something about it?

[@JamesAngeloTV]

that is with bluetooth, no idea about bluetooth so far my order not reach

[@JamesAngeloTV]

but it should be same only even with bluetooth main thing you will adjust in app

[@scooter_don8569]

@@JamesAngeloTV in tft i don’t have this functions only in app , is it normal?

[@dia5737]

in mine the advanced settings do not appear

[@JamesAngeloTV]

what version of tft display do you have?

[@dia5737]

@@JamesAngeloTV 25ah

[@dia5737]

When I try to accelerate it shakes like it's a car but it doesn't go forward how do I get this thing off

[@АндрейЖуков-й4т]

Почему блютуза нет????😢😢😢😢

[@JamesAngeloTV]

bro english

[@rommtb8010]

Idol meron akong fighter 11 kaso sa panel walang nag papakita na advance setting.

[@rommtb8010]

Baka alam mo kung pano palabasin advance setting nya.

[@JamesAngeloTV]

app version ba?

[@rommtb8010]

@@JamesAngeloTV yes idol

[@rommtb8010]

@@JamesAngeloTV idol anong fb mo add kita.

[@korencek]

294km travelled and max speed 37,7km/h? lol what.

[@JamesAngeloTV]

i didn’t get your question bro

[@korencek]

@@JamesAngeloTV I thought you made 294km and had max speed of 37,7km/h.

[@JamesAngeloTV]

no bro that is total mileage, top speed i did is 110kmph

[@viblis6367]

zero information what settings what doing, just reading the words and thats all... dislike

[@JamesAngeloTV]

thanks bro