TG F4 Toy Superior Mid end Gel blaster Spring and Green Oring Upgrades

[@remylova]

im not philipines.i just watch the vdeo and not understand😁.what kind spring is that,where to get it and the o ring to..

[@grimfoxyt8629]

@@remylova Hehe. Im using m60 spring and green oring size is 24-2.4

[@remylova]

what im seeing the m60 spring is bit hard from the stock.is it ok to replace the spring only?

[@BurntGuyThe3rd]

Can upgrade to metal gears?

[@grimfoxyt8629]

@@BurntGuyThe3rd unfortunately not. It has different diameter of gears. Smaller than the metal gears.

[@kulaanangler809]

Can tell what size for f4 metalgear

[@grimfoxyt8629]

I haven't yet open my f4 yet due to hectic schedules

[@mohdrahsyid6490]

Can i change the inner barrel for this blaster..what size for the barrel..

[@grimfoxyt8629]

@@mohdrahsyid6490 absolutely. 7.1mm to 7.4mm.

[@mohdrahsyid6490]

@@grimfoxyt8629 tq bro..

[@mohdrahsyid6490]

what more thing bro..can this f4 change the metal buffer tube and her butstock..

[@grimfoxyt8629]

@@mohdrahsyid6490 yes you can change it to metal buffer tube. All buttstock can fit to tg f4.

[@Willz_bored]

Well damn

[@cicakblaster247]

I don't speak tagalog but I'll ask anyway. What should I do to improve my rpm and fps? This video details the o-ring and spring upgrade but do you recommend replacing the gears too? If so, what should I buy?

[@grimfoxyt8629]

Thank you for reaching out. This blaster is mid end which means. Full nylon structures inside and out. Enable for you to upgrade, you need to replace the gearbox to gen8.5 gear box. To increase the rpm and fps - 11.1v motor, Spring and 11.1v

[@cicakblaster247]

@@grimfoxyt8629 What site can J get the gen 8.5 gearbox?

[@grimfoxyt8629]

@@cicakblaster247 in the Philippines we have an online shop platform. Try to click this link. It will direct you to the product.s.lazada.com.ph/s.NUn0V

[@cicakblaster247]

@@grimfoxyt8629 Thanks for the reply, another question I want to ask is the bottom side handguard of the F4 isn't picatinny and I don't see any holes available to MLOK things into it. How would I turn the entire bottom of the Handguard into picatinny?

[@grimfoxyt8629]

@@cicakblaster247 my pleasure. With in regards of the handguard. You can install mlok railings. The one that has bolt lock installed inside the handguard.

[@chupol5659]

pede palitan gearbox nea? siguro if lalaruin ko in the field yan paltik paltik nalang minsan ako mag rapid fire

[@grimfoxyt8629]

Not sure Sir. Di ko pa po na try mag change. Pero sabi nila pwede daw. Pero mag try po ako. Hopefully kapag di na po ako busy.

[@boloy105]

Sir pwde din ba yung m90 or m95 spring?

[@mohdrahsyid6490]

Can i put m75 spring bro?

[@grimfoxyt8629]

@@mohdrahsyid6490 possible. But if you want not to compromise yung gears. I suggest m60 is the best for long term use.

[@mohdrahsyid6490]

Tq bro...and I want to asked about gell ball..went I shooting,the gall ball is broken or shattered..

[@mohdrahsyid6490]

@@grimfoxyt8629what diameters of M60 spring...I can't fine that size on lazada..

[@grimfoxyt8629]

@@mohdrahsyid6490 i suggest you change your gel balls to milky white or 60n. Very durable gel balls if you ask me. 😊

[@grimfoxyt8629]

@@mohdrahsyid6490 i have piano springs here for sale. It's my best seller spring after i posted the f4 upgrade content. Only 200php bro.

[@indonesia8271]

Pede po ba palitan ng metal handguard/butt stock??

[@grimfoxyt8629]

@@indonesia8271 pwede po. Sa handguard make sure po na may adaptor para wala pong problema ang pagka salpak

[@indonesia8271]

@grimfoxyt8629 anong handguard na metal prefer nyo po?

[@grimfoxyt8629]

@@indonesia8271 pwede po sa mk8 bohan Sir. Marami po sa lazada

[@JosephEuy]

sir may nabibili po bang gear for replacement?Nasira kasi yung akin.

[@grimfoxyt8629]

@@JosephEuy unfortunately Sir. Wala po akong nahanap na replacement para gears nya. If in case kung meron man. Babalitaan ko po kayu agad

[@Bubble-Blaster]

Hey, How much FPS ?

[@grimfoxyt8629]

@@Bubble-Blaster the results are on the last minute of the video

[@ivanegasper5673]

anu pong magandang spring para sa m4 viper sir . upgrade para sa fps

[@grimfoxyt8629]

M95 ang ma suggest ko Sir. For safe build

[@paulthecabs8929]

Boss ano masusuggest mo, pag hinila ko yung priming handle hindi gumagalaw yung motor ng magazine, kaya kailangan ko baril barilin para magfeed yung bala, paano maaayos yun? salamat

[@grimfoxyt8629]

@@paulthecabs8929 duda ko po baka may naputol po na wire sa automatic priming nya sa loob.

[@JuvyWata]

Can i put 11 volt po at pwede siya ng bohan mags

[@princeakmad9243]

pwede po ba mahingi ang link ng spring at oring na yan kuys? balak ko kasi i upgrade yung akin

[@animetv5601]

Sir san pwdi bumil ng parts

[@ninojenkinmarkrizan7821]

Magkano po at paano mag avail ng srrvices

[@grimfoxyt8629]

@@ninojenkinmarkrizan7821 good day po. Unfortunately di na po ako mag uupgrade Sir. Busy na po kasi sa personal work ko. Nag bebenta nlang po ako

[@ninojenkinmarkrizan7821]

@grimfoxyt8629 ano po at hm ung gel blasters na available?

[@NCERXZ]

boss pede ba palitan ng barrel yan?

[@grimfoxyt8629]

@@NCERXZ pwede po. May bago po akong content sa f4 na pinalitan ko ng inner barrel

[@mw3veteran]

Kuya pwede po ba ipalit yung nylon gears to metal gears, if pwede, pwede po ba yung 18:1 metal gear set?

[@grimfoxyt8629]

@@mw3veteran gwan ko po yan ng content soon Sir. Para may guide po kayu.

[@Kacip93]

1.2 or 1.3 spring is better?

[@grimfoxyt8629]

@@Kacip93 1.1 is perfect. M60-m70 spring

[@Ren07Ace]

hello sir..napabili kasi ako ng mid end slr nylon..tanong ko sana if posible siya na iupgrade kahit spring lang or ang barrel?..

[@grimfoxyt8629]

@@Ren07Ace spring m60 po then green o ring. Goods na po yan

[@Ren07Ace]

pde ko pachek sayo unit ko boss?..taga Tagum po ako..hehe hm aabutin if upgrade spring at oring po?

[@meijinkawaguchiiii2540]

Ayus boss, nylon gear pa lang na ba kusog na spring ug o ring ra upgrade

[@grimfoxyt8629]

@@meijinkawaguchiiii2540 yes boss. Sa ka dugay2x nako ug taod unsay saktong springm nakuha rajud angay boss. Heheheh

[@meijinkawaguchiiii2540]

@grimfoxyt8629 hehe as always nice upgrade video boss

[@grimfoxyt8629]

@@meijinkawaguchiiii2540 Thank you boss sa suporta. 🙏🏻

[@akitoartz209]

kuya ano pong pwede gamitin kong mga tracers para sa F4 fitted bah lahat ng threaded ones yung mga nakikita ko sa lazada???? tapos nakaka bitan bah sya ng mga metal parts?? like SLR handguard yung mga ganun???

[@grimfoxyt8629]

@@akitoartz209 thank you po sa katanungan nyo Sir. Yung thread po ng f4 is 14mm reverse thread. As long as po na 14mm yung mga muzzles, suppressors at tracers. Fit po yun sa f4. Pwede po Sir lagyan ng metal hand guard at metal buffertube. Pero dapat nyo po i consider na bibilhan nyo po sya ng adaptor sa handguard kasi po sa market ngayon. Hollow po yung most handguards na binibenta. And for the buttstock. Make sure po to buy na walang bolt. Kasi di po sya katulad ng SLR buffertubes na may bolts na silasalpak sa may pwetan.

[@dannielleanthonyangeles3271]

San ka po naka bili ng spring na m60?

[@grimfoxyt8629]

@@dannielleanthonyangeles3271 piano spring po ang m60 Sir. Meron po tayung available

[@dannielleanthonyangeles3271]

How much sa spring tapos o ring

[@dannielleanthonyangeles3271]

Kukuha ako. Asap sana hehehe

[@jyengranada880]

Anong diameter yung O ring?

[@grimfoxyt8629]

24-2.4 po

[@ysraelrivera1383]

Hi Sir paano mg order ng spring at o-ring

[@jackvivek5334]

that already metal gear?

[@grimfoxyt8629]

@@jackvivek5334 sadly so say. All nylon internals

[@vaughnkodyformoso2491]

Okay where do I BUY THE SPRING AND GREEN ORING IN PH? is it upgradeable with m75 spring pleaseeeee send me the links. BTW op vids

[@grimfoxyt8629]

@@vaughnkodyformoso2491 Thank you for the support. If you'd like purchase. I have m60 spring at green oring for f4. I suggest m60 spring for the f4. Safe build is the best to enjoy your unit in the long term usage

[@robertjunio1888]

@@grimfoxyt8629how to purchase po

[@JpmuegaMuega]

Pa ano mag pa ayos sayo boss nang m4 1a v2

[@grimfoxyt8629]

@@JpmuegaMuega pm me fb bossing. Loureign James L. Sajol. Taga dvo area po ako

[@mw3veteran]

Kuya pwede po ba m90 or m100 spring?

[@mw3veteran]

At ano po yung mm ng green oring?

[@grimfoxyt8629]

@@mw3veteran m60 po ang safe ng spring na pwede isalpak sa f4 po. Size ng green oring is 24-2.4

[@678liner]

Magkano po ang pa upgrade sainyo?

[@grimfoxyt8629]

@@678liner 2,700 po all in ksama na si unit, shoulder nyo lang po ang shipping

[@JakeIverBorbon]

Sir pwede po ba mahingi ang link ng spring at green o-ring

[@grimfoxyt8629]

@@JakeIverBorbon for spring po. Pinagawa ko lang po dito samin Sir. Dinala ko lang po yung stock ng high end gel blasters. May shop po kasi dito gumagawa sila ng springs pang airsoft.

[@mackynery6199]

Sir anu po kaya size nung gear ni f4?..nasira napo kc yung gear nung saken at balak ko palitan ng metal gear..thanks

[@grimfoxyt8629]

@@mackynery6199 try nyo po 13:1. Yan po ang sukat ng nylon gear nya

[@sninethemidget]

@@grimfoxyt8629 tinry ko 13:1 malaki masyado SHS gears eh, maliit gears ni F4 tapos baka malaki rin standard gears

[@sninethemidget]

nasira ko kasi yung akin, malakas masyado spring nilagay ko kaya napudpod yung gears, di na tuloy marepair at sayang yung unit

[@michaelternida276]

Boss same ba gear box nyan sa mk8 or any gen 8 gearbox?

[@grimfoxyt8629]

@@michaelternida276 same Sir. Pero i suggest bili nlang ng high end. Kasi nasa 2k din ang gen8.5 geabox

[@regiehole]

magkano sir if upgrade lang sa akin unit po..

[@grimfoxyt8629]

@@regiehole yung papalitan lang po natin jan is m60 spring at green oring po. 230-250 fps na po ang result nun. Spring is 200php and green oring is 50. Labor lang po is 100. 350 pesos lang po magastos nyo po for upgrade. Pm nyo po ako. Loureign James L. Sajol, usap tyu sa fb

[@princeakmad9243]

wala akong mahanap na m60 na spring kuys, puro 120 pataas e. may link ka ba jan?

[@grimfoxyt8629]

@@princeakmad9243 coming next week m60 ko kuys. Tas may inner barrel nadin akong 7.5mm para sa f4

[@princeakmad9243]

@@grimfoxyt8629 pahingi ako link kuys, hindi ko kasi alam ang tamang size haha

[@grimfoxyt8629]

@@princeakmad9243 direct po ako sa warehouse Sir

[@grimfoxyt8629]

@@princeakmad9243 meron na akong 7.5mm hahaha. Pm moko. Loureign James L. Sajol

[@grimfoxyt8629]

@@princeakmad9243 may m60 na po ako kuys.

[@JomelTenedero-il9ev]

Idol sa tingin ko matibay na din nylon gear pwede n sya sa sport

[@grimfoxyt8629]

@@JomelTenedero-il9ev pwedeng pwede po. Masakit nadin damage nya boss. Pero iba parin po tlga si high end.

[@JomelTenedero-il9ev]

@@grimfoxyt8629 Yun lang po kaya budget kaya Yun n lang po bibilihin ko maganda po kaya Ang ar15

[@grimfoxyt8629]

@@JomelTenedero-il9ev para sakin Sir. Compared sa other mid end blasters. Maganda po ang F4 tlga. Mostly sa mga clients ko f4 ang orders. Tas inupgrade ko para lumakas lalo. Ar16 po ba yung 80% Metal?

[@JomelTenedero-il9ev]

@@grimfoxyt8629 Yung nylon po Ang build Kase Yun po affordable Ng budget po

[@grimfoxyt8629]

@@JomelTenedero-il9ev ahh. Mgnda tlga din ang mga bagong labas ng mid end ngayun. Kahit all nylon structures. Sulit nadin po

[@Richiru.Kozuka]

High end promoter😂 pwede nmn pla ma upgrade gearbox, nka less pa sana si viewer.

[@grimfoxyt8629]

@@Richiru.Kozuka In my own point of view nman po. Based po sa kaalaman ko. Yaw ko din po kasi gumastos pa si Viewer ng thousand pesos to upgrade the gearbox. Pag bumili po kasi kayu ng nylon gearbox na gen8.5. Nylon gears din po ang darating. Bibili ka din po ulit ng metal gears. If metal gearbox nman. Nasa roughly 2,800 din po yun. Cost nadin po ng high end. Doble gastos din po si viewer

[@Richiru.Kozuka]

@@grimfoxyt8629 nka bili ako tuloy nang mk8 , ahahh .

[@Richiru.Kozuka]

Trip ko sana tg kase 1,200 lang .

[@Richiru.Kozuka]

3k , di metal gear .

[@grimfoxyt8629]

@@Richiru.Kozuka uo Sir. The best yang mk8. Malaks na sya from the box pa lang. Sulit po yan. ✌️☺️