A lot of people have been asking about how the layout is wired and the power is transferred from module to module. I went into more detail about this in Episode 6 which you can watch here: kzbin.info/www/bejne/anW1o6hrpd14nLM
@andrewlaverghetta715 Жыл бұрын
American here. Im here to see fun model railroads, and see how different people join their modular layouts together so there aren’t problems between modules and how the rails are trimmed to match up. Also, much of the US is flat, but there’s a LOT of US, so there are many variations in the topography. It definitely isn’t all flat, but modern railroads definitely are more prone to take the least resistance nowadays, which I think is what is modeled most.
@ThatModelRailwayGuy Жыл бұрын
Oh definitely, but I think in the US you seem to have more wide open spaces than we do in the UK. So many of our railways (especially old preserved ones) are built in small confined spaces and valleys, carved into the landscape. That make it much more noticeable that the land around the railway is anything but flat. Thanks for watching 👍
@steveharper55364 жыл бұрын
Hi seems a great way of enabling you to join various modules and interchange them as required. look forward to seeing more.
@ThatModelRailwayGuy4 жыл бұрын
That's certainly the plan Steve, I just need to finish a few more modules now! Thanks for watching 😃
@djwarren50814 жыл бұрын
I've been thinking about constructing a modular layout for a while now. I'm watching your progress with interest. Thanks for posting.
@ThatModelRailwayGuy4 жыл бұрын
Awesome, glad you’re finding the videos useful. Good luck with your own modular layout and thanks for watching 😃
@Flyprh Жыл бұрын
Really enjoying these videos, I've always loved model railways but have never had the space to have a proper layout this may be the answer!
@ThatModelRailwayGuy Жыл бұрын
Really glad to hear you've been enjoying them Paul, a lack of space was the exact same reason I started this project. The great thing is that the modules can be as big or small as you like and getting each one finished inspires you to start another. Thanks for watching 😃
@richardclowes61232 жыл бұрын
Thanks for the link to this. It's very clear to see that you have covered all options in the symmetrical design etc. I just wish I'd seen this at the beginning of Lockdown when I started my 'born-again model railwayer' as I most certainly have done it this way. Hey ho, such is life eh !!! But now I know for the next layout. Thanks a million, Rick the Bulldog
@ThatModelRailwayGuy2 жыл бұрын
My pleasure Rick! I did spend quite a bit of time planning out how to to get everything to fit together but I was definitely influenced and inspired by others who have built their own modular layouts. Thanks for watching 😃
@jonathanb26224 жыл бұрын
Fantastic video once again. Must admit I hadn't considered modular before these but seeing you talk through how it all connects up (and the possibility to vary the layout) is definitely appealing. Absolutely love the way you do scenery. Cheers!
@ThatModelRailwayGuy4 жыл бұрын
Thanks Jon! I'll admit I thought it was a bit of a gimmick at first but I quickly realised it could be useful considering I wanted a large layout but don't have the permanent space for one. It's also handy as I'm always changing my mind about what kind of layout I want - now I can have several all in one! Thanks for watching 😃
@markbridgmansmith1655 Жыл бұрын
also makes the elephant easier to eat, when time and space is limited, makes any project far less intimidating for noobs (me ! :) )
@shad66442 жыл бұрын
This is fantastic! I’ve been thinking of this same concept using 28” x 80” hollow doors as the module base, track center aligned so I can set them up any way, flipped, reversed etc. like yours. The end template had me stumped, was thinking of jigsaw but I love the laser cut solution! Great idea. Same with the pins, was thing about using existing locking hardware (barrel bolt) but seems too loose. Thanks, you got me excited!
@ThatModelRailwayGuy2 жыл бұрын
Great stuff, really glad to hear this has got you excited! Yes the laser cut ends are a great way of doing it to make all the ends consistent. I can’t claim it’s an original idea though, I’m pretty sure I’ve seen other layouts use similar methods. Thanks for watching 😃
@joshrussell40814 жыл бұрын
the laser cutting is a brilliant idea, I may have to steal it
@ThatModelRailwayGuy4 жыл бұрын
Haha, be my guest 😁 I’m certainly not the first to do it so it’s not an original idea but part of making this video was to bring it to a wider audience. Thanks for watching 😊
@andrewjditton3 жыл бұрын
Excellent, genius, extremely useful, and a professional production. Top notch - thank you!
@ThatModelRailwayGuy3 жыл бұрын
Thanks Andrew, really great to hear such positive feedback. I like to keep the videos engaging and maintaining a high production value is certainly part of that. After all, what's the point in sharing a new idea if no-one can tell what you're doing! Thanks for watching 😃
@nicholasbishop33003 жыл бұрын
Really like the way you have achieved this, great result Nick Australia
@ThatModelRailwayGuy3 жыл бұрын
Thanks Nick! It's sort of the combination of several existing ideas all thrown together so I can't take much credit for it but it does seem to work well for a modular setup. Thanks for watching 😃
@jhoop20022 жыл бұрын
That is brilliant. I was wondering if something like this was even possible.
@ThatModelRailwayGuy2 жыл бұрын
Yep it’s definitely possible, I have an entire layout that uses this principle to prove it. Thanks for watching 😃
@greatnorthernrailwaytother47114 жыл бұрын
Great video. Well done. Peter (from Australia)
@ThatModelRailwayGuy4 жыл бұрын
Glad you enjoyed it Peter! Thanks for watching 😃
@cdjhyoung Жыл бұрын
I have a couple of suggestions about laying the track to the end of the module. First, in the last 3-4 inches at the edge of the module, substitute a piece of luan the same thickness as your cork road bed. We use cork because it is soft, but this works against us at the edge of a module in supporting the track over the life of the module. In the US, N cork is about 3 mm thick, HO is roughly 5 mm thick. Substitute plywood in these thickness is available at most hobby shops in their supplies for ship building hobbyest. My second suggest is to use the uniform bolt hole and build a track alignment jig that is keyed to the bolt holes. This could be as simple as a piece of wood with two holes drilled to match the bolt holes that also includes a piece of track alignment gauge attached to the top of it to align the track you are laying. A alignment gauge like this will eliminate the need for careful visual alignment of the track when soldering it in place. I work in N and use #2 1/2 inch flat head wood screws to attach my rail ends to the edge of the module. I also have a track alignment tool like I've described to hold the track perpendicular to the module edge when attaching it.
@ThatModelRailwayGuy Жыл бұрын
With the 12+ modules I've built so far I haven't experienced any problems with support at the end of the modules. The cork is well protected by the endplates and is really only there for visual purposes anyway to give the ballast a shoulder. The track itself is supported by the brass screws. When it comes to aligning the rails, for filming purposes I chose to do this on an isolated module so that it was clearer to see for the video. Usually I have another module attached so that aligning the rails and, more importantly, getting the height right is easy. I've found this the best way to get smooth running across all modules rather than a jig as each module has it's own unique quirks to account for. Hope that makes sense and thanks for watching 👍
@foxhillrailway22524 жыл бұрын
well done mate... a really fantastic system... i have seen this type of modular set up before, but your presentation kept me captivated... ATB Neil
@ThatModelRailwayGuy4 жыл бұрын
Thanks Neil, yes I've definitely been inspired by other modular layouts and have adapted the techniques for my own use but glad the video was still interesting for you. Thanks for watching 😃
@captaincool33293 жыл бұрын
I know a little about FREMO, having watched a video about it on KZbin a while ago. It originated in Europe (with the Friendship of European Modellers) as they needed a common system for when they would meet up to run trains together (once annually near Salzburg from memory).
@ThatModelRailwayGuy3 жыл бұрын
Ah brilliant! I’d always assumed it was an. American thing given how popular it is over there but good to know it was actually a European creation! Thanks for watching 😃
@alfredbarten49013 жыл бұрын
Brilliant. Thank you!
@ThatModelRailwayGuy3 жыл бұрын
Thanks Alfred, glad you enjoyed it! Thanks for watching 👍
@railway1873 жыл бұрын
Fantastic idea 💡 thanks for sharing 🙏
@ThatModelRailwayGuy3 жыл бұрын
Thanks! I can't take all the credit as it's based off techniques I've seen on similar layouts but I've made it my own to a certain extent. Thanks for watching 😃
@dibley19733 жыл бұрын
That is such a good concept!
@ThatModelRailwayGuy3 жыл бұрын
Thanks! Not a totally new idea but I did sort of adapt things I'd seen previously to suit my own needs.Thanks for watching 😃
@JohnSmithShields3 жыл бұрын
If your hope was to inspire other modellers, you have succeeded. I am very space limited, but can see how this system would allow me to dream bigger, and fulfill those dreams, in instalments, with the ultimate goal of having a roundy-roundy layout in my 1 bedroom flat, alongside my work in progress inglenook wagon works. Thank you.
@ThatModelRailwayGuy3 жыл бұрын
Amazing! Yes I'm in the same boat, I don't have space for a large permanent layout but I've always wanted to build something a bit bigger than my shunting layout. By working in sections it also means I don't get stuck doing one thing for too long either which is great as it keeps me interested and motivated. Really glad this has inspired you and let us know if you ever make a start on your dream layout. Thanks for watching 😃
@kierankinsella70473 жыл бұрын
Fantastic vid, thanks!
@ThatModelRailwayGuy3 жыл бұрын
Thanks Kieran, really glad you enjoyed it. Thanks for watching 😃
@garyauer16913 жыл бұрын
I like watching your videos and would like to offer a suggestion regarding when you join your track between modules. I think if you overlap the track ,by whatever amount you need to onto the next board so you don’t have that bump when the train goes over it,because let’s face it, it’s very hard to get the module’s exactly flat to line up the track,going by what I’ve seen on your videos. Then you can wire up as you have done before for your electrical continuity. Keep up the good work with what your doing,it gives other modellers great assistance with their own layouts.
@ThatModelRailwayGuy3 жыл бұрын
Hi Gary, really glad you're enjoying the videos. That is a possibility but the main problem with having the track overlap is that when the modules are disconnected the rails would be suspended over the edge of the board. As they're so delicate they would be prone to getting broken or even just knocked out of alignment. That's why I was soldering them to the brass screws at the end of the rail as otherwise I've found you just can't get the precision needed. Thanks for watching 😃
@MrMikef3503 жыл бұрын
I can’t tell you how happy I am to have found a series of videos that explain how I’d personally like to do a layout (modular) plus it’s great how you have gone into details on how your doing it 👌 is there any chance I could buy some of them end templates you have had made up ?
@ThatModelRailwayGuy3 жыл бұрын
Fantastic, that's great to hear Michael. I'm always happy to share my progress on the layout with everyone and hopefully give people some ideas. At the moment I'm not able to sell the endplates but they're fairly simple to draw in CAD - or many of the laser cutting companies can help with design too. Thanks for watching 😃
@quarryjunction-19695 ай бұрын
Great video followed most of your tips in your videos however missed this one and now my boards dont match up, my mistake connection dowls you mention now on order. Once again many thanks
@ThatModelRailwayGuy5 ай бұрын
Ah yeah, they're pretty crucial for getting the tracks to align properly each time. Thanks for watching 😃
@WickedMuis Жыл бұрын
I've been looking at videos about creating modular layouts and this is the first one that actually goes into aligning the boards and tracks in a practical manner. Personally, without experience of my own yet, I'd use smaller skrews to solder the tracks to perhaps, to make it even harder to detect. Also: would it be useful in any way to use the connectors that you use to align the board also for conveying power from one board to an other? Great videos! Quality and clarity is right up there with the likes of Sam's Trains!
@ThatModelRailwayGuy Жыл бұрын
Hi there, really glad you found the video helpful! You could potentially use smaller screws, I just think the larger contact area to solder the rail too is helpful as well as the depth going into the baseboard frame makes it a really solid joint. Generally these screws get covered up by ballast but I have seen people use copper clad sleepers if they prefer to have everything looking perfect. You could also use the connectors to transfer the power too. The reason I didn't was mostly for simplicity (it's much easier to resolve any connection issues if it's not built into the frame). But it's definitely possible and I think the layout that inspired this project did indeed transfer power that way. As always the nice thing about these videos is that they show the way I do it, but they can act as a spring board for others to take the same principles and adapt or improve them for their own uses. Thanks for watching 😃
@thiruraj38664 жыл бұрын
This is cool
@ThatModelRailwayGuy4 жыл бұрын
Thanks! It took a bit of planning but I’m really pleased with the results. Thanks for watching 😊
@upwellonwards73734 жыл бұрын
G'day mate amazing video and using lasercut ends is very clever might try it out if i have to rebuild my layout hope ur keeping safe and seasons greetings
@ThatModelRailwayGuy4 жыл бұрын
Thanks, they’ve certainly worked well for me! Best of luck with your own layout and thanks for watching 😃
@reaperrev19854 жыл бұрын
thank you for such an inspiring set of videos, i am just in the process of starting my layout after many years of it being stored away, i really like the idea of the modular system you have go there, where could i find the place you purchased the endboards from? thanks Liam
@ThatModelRailwayGuy4 жыл бұрын
Thanks Liam, really glad to hear you’ve been enjoying the videos - there’s lots more coming next year! The endplates are custom so we’re designed by me but I used LaserLab.co.uk to get them actually made, though it’s worth searching around other laser cutters online to see who can do the best price. Thanks for watching 😃
@reaperrev19854 жыл бұрын
@@ThatModelRailwayGuy thanks will check them out
@IainForsyth-mu4ey2 ай бұрын
Great series. Well done! I have really enjoyed watching all the episodes and am now starting to make my own modular layout, although I haven't got very far yet! Can you tell me what material the endplates are made from, and how thick they are?
@ThatModelRailwayGuy2 ай бұрын
Really glad you've enjoyed the series. My endplates are 3mm thick hardboard - the material doesn't matter so much as the thickness. If you're going to have them rise up above the level of the baseboard like I did, I would actually make them even thicker in hindsight. This will stop them flexing back and forth so much when you add the scenery. Hope that helps and thanks for watching 😃
@Dccrailways831 Жыл бұрын
Very helpful! What a great idea to use brass screws are so much better than the copper clad, I’ve now switched to brass screws instead permanently now! Thanks for the idea. Also what solder do you use?
@ThatModelRailwayGuy Жыл бұрын
My pleasure, I definitely find them more sturdy as they anchor into the wood of the frame. Generally I use 0.8mm lead free solder but honestly I tend to go with whatever's available. Thanks for watching 👍
@markd2x1 Жыл бұрын
Hi, great information and help for a newbie here! Thank you!! I am seriously considering this method for TT:120 but want to have both radius 2 and 3 which would mean the track centres are at 310mm and 353mm. I’m propose to build 40cm wide modules which would mean the boards would only fit one way around and I would need to go to the straight end profile. Then probably use multiples of 40… I was thinking about going from the curve onto a straight at the corner joint, do you see any issues with joining on the curve end? Thanks…
@ThatModelRailwayGuy Жыл бұрын
Hi Mark, the concept of a modular model railway should work in any scale, not just 00. It's all down to the planning and it sounds like you've got a good idea of what you want already and have been thinking about how to achieve it. While my layout is fully modular (ie: all the modules are interchangeable and reversible) there is also the option of build a portable layout which still breaks down into sections but is only assembled in one particular way. That might be another potential option for you if you have multiple running lines and you want to keep things consistent. Thanks for watching 😃
@IsMiseStiùbhart Жыл бұрын
This series is inspiring me to think about building my.own layout. Two questions though if you don't mind. Firstly, what do you sit your baseboards on? Secondly, how do you go about designing the end bits of the baseboards? Thank you!
@ThatModelRailwayGuy Жыл бұрын
Hi there, the modules all sit on A frames legs from B&Q, I bought a load when I was starting the project but I think they've gone up in price now. The endplates were drawn out in Adobe Illustrator but any vector graphic software will work. The important bit is to follow the specifications set by whoever is doing the actual laser cutting. Hope that helps and thanks for watching 😃
@ZakCooper198511 ай бұрын
Are you sharing the end plate designs or any guides on how to make our own? I think its a brilliant idea but have no idea where to start!
@ThatModelRailwayGuy11 ай бұрын
I'm not able to make them available currently but you can see the basic design from the video. I had no idea about any of this stuff at this point either but through trial and error I got there. They were basically designed in Adobe Illustrator and sent off to a laser cutting service from there. Hope that helps and thanks for watching 😃
@ZakCooper198511 ай бұрын
@ThatModelRailwayGuy it does thank you. Fortunately I do know how to use illustrator but was wondering how you got it to scale / size etc.
@billybean89114 жыл бұрын
Btw I did love this video
@ThatModelRailwayGuy4 жыл бұрын
Glad to hear it 😃
@leightonmoreland8 ай бұрын
so in freemo you can have non flat end sections so long as they are intended only to join to your own module. So you can create your own mountain range scene that's broken up over 3-4 modules as long as they're intended to always be together. The flatness is a bit of a bummer but that's somewhat the nature of the game unfortunately
@ThatModelRailwayGuy8 ай бұрын
Yes that was kind of what I was talking about when I said you can do whatever you like in between but the ends where you join onto others modules are always flat. For me that wouldn't really work, partly because I wanted to have as much flexibility as possible when setting the layout up in different configurations but also because, in the grand scheme of things, my layout is probably much smaller than most Freemo style layouts. Thanks for watching 😃
@Pierre-de-Standing4 жыл бұрын
I'm going modular too, but my methods are nowhere near as refined. I will need to be able to store my boards under the bed, so they are 70" x 24" (179 cm x 60 cm). There are four of these and two inserts on the edge of 31" x 15" (79 x 38 cm). Mine will have to fit in a specific way because of the layout design. Had I come across your stream sooner, I would have adopted your approaches. Will follow this project of yours with great interest! How do you join the electrics?
@ThatModelRailwayGuy4 жыл бұрын
Ah brilliant, your modules are a bit bigger than mine then! Best of luck with your own layout build 👍 I’ll go into detail on the electrics in the future but the quick version is the track is fed by bus wires under each module which have connectors on each end to transfer the power to next baseboard. Glad you enjoyed the video and thanks for watching 😃
@Pierre-de-Standing4 жыл бұрын
@@ThatModelRailwayGuy If only you could use the connecting bolts or dowels for the two bus wires - just a thought. I'll need more than those, I have signals too 🤔. Fortunately all the points are DCC controlled, so the point motors or controllers can get their power etc from the bus.
@ThatModelRailwayGuy4 жыл бұрын
People have done that but I thought it was about beyond me 😂 Yeah I know what you mean about point and signal wiring. Luckily for me I’ve managed to keep most of it just two modules so I can cut down on extra wires.
@dathotac34962 жыл бұрын
Hi there! Your video series have inspired me to make my own module layout! Thanks for what you do! I'm not sure if you still see these comments since this vid is a tad old, but if you don't mind me asking, what kind of hardware do you use to connect the baseboards? I can't seem to find anything similar to use for my baseboards. Thank you!
@ThatModelRailwayGuy2 жыл бұрын
That’s awesome, really glad to hear these videos have inspired you! I use M6 bolts to hold the baseboards together and alignment dowels to keep the boards and track aligned correctly. Hope that helps and thanks for watching 😃
@dibley19733 жыл бұрын
You could publish the end plate plans and create a new UK standard for modular layouts, so if we ever get exhibitions again others Could connect to yours.
@ThatModelRailwayGuy3 жыл бұрын
I have thought about that but there's a few modular groups out there already so if people really wanted to join up with other layouts they'd probably be better off building to those standards instead. Thanks for watching 😃
@Hillsider195710 ай бұрын
Love these tutorials, I’m just setting up my modular system, can you help with company who cut you joining templates, having trouble finding someone who can do them for me. Thanks
@ThatModelRailwayGuy10 ай бұрын
Hi there, these days I tend to cut my own but before I had a laser cutter I used both Laser Lab and RazorLAB for the custom cutting. I did use other places as well - basically I would shop around for the cheapest price. Hope that helps and thanks for watching 😃
@elsbridgeproductions3 жыл бұрын
Hi! I've just started watching your videos and I'm really enjoying them! I was just wondering how you were doing the wiring for your boards and carrying the power from one board to another? I may have simply missed it, but I'm curious as to how you're going about the electrics.
@ThatModelRailwayGuy3 жыл бұрын
Thanks, really glad to hear that! I touched on the wiring for the modular layout very briefly in the latest episode but a lot of people have been asking similar questions so it's definitely something I'll be going into more detail in during a future episode. Essentially though the track is fed from bus wires under each module and these have connectors on each end to join up to the bus wires on the next module. As I say I show all this in detail in the next episode but hope that helps in the meantime and thanks for watching 😃
@filip78channel153 жыл бұрын
Hi, great video about aligning the track across the baseboard joints. This video is the only one I have seen so far, as you cut the track BEFORE soldering to the screws. I find this way better as well (more confident with track cutting this way), but doing so is this not more risky than first solder on both sides and at the very end cut the track?
@ThatModelRailwayGuy3 жыл бұрын
Thanks, glad you enjoyed it! Yes it is more risky doing it this way but because I'm building each module one at a time (and because I want them to all be interchangeable) I don't have the option of laying the track over the join and then cutting the rails. If you were building a more traditional portable/exhibition layout that is only intended to be setup in one particular way though, then I'd highly recommend you solder the track across the join first and then cut the rails. Thanks for watching 😃
@filip78channel153 жыл бұрын
@@ThatModelRailwayGuy Many thanks for confirming this.
@billybean89114 жыл бұрын
This is epic may I suggest that you see if some traintubers and people of your and others community would be interested in building parts of a railway system and then hosting them in a hall for the public sort of thing as it does happen but you could sell the end plates and maybe create more diverse world's ??? I think it would be coll
@billybean89114 жыл бұрын
Cool
@ThatModelRailwayGuy4 жыл бұрын
Thanks! It's a possibility but Freemo generally seems to be the most popular standard so if people wanted to build part of a modular layout that would be their best bet really. Never say never though! Thanks for watching 👍
@quarryjunction-1969Ай бұрын
I like the look of the end plates do you sell them by any chance?
@ThatModelRailwayGuyАй бұрын
I don't but there's nothing to stop you doing what I did, which is create a design and have a company cut them for you. Thanks for watching 😃
@neilriley102 Жыл бұрын
Is the file that you created for creating the endplates available for other people? Loving the series. Thanks
@ThatModelRailwayGuy Жыл бұрын
Hi Neil, not currently but it is something I'm looking into possibly being able to release in the future. Thanks for watching 😃
@mattevans91803 жыл бұрын
Great Video Series and love the modular approach. I was wondering what software did you use to create your endboards as I am looking to do something similar and could do it by hand but know that I would not be able to get them to align correctly.
@ThatModelRailwayGuy3 жыл бұрын
Thanks Matt, really glad to hear you're enjoying the videos! I created mine in Adobe Illustrator but I think any software capable of drawing vector graphics should be fine. A lot of the time the laser cutting companies will suggest compatible programs that you can design you parts in along with instructions on how to set them up to be cut correctly. Hope that helps and thanks for watching 😃
@TheRealLordLuck3 жыл бұрын
Do you recommend using screws and solder even when not using flexi track over joins?
@ThatModelRailwayGuy3 жыл бұрын
Hmm, that's a tricky one as I've never used set track over baseboard joints and I'm not entirely sure how it would work in practice. The point of soldering the rails to the screws is not only to keep them properly aligned but also to protect them from getting damaged when the boards are disconnected. If set track is more robust and doesn't need that extra protection it may not be necessary but it's not the way I would personally go about doing it. Thanks for watching 😃
@modelrailwaynoob3 жыл бұрын
thx
@ThatModelRailwayGuy3 жыл бұрын
No problem! Thanks for watching 😃
@astrosathya19842 жыл бұрын
how do you ensure electrical connectivity between the modules please?
@ThatModelRailwayGuy2 жыл бұрын
Hi there, I have wires underneath the baseboards to feed the tracks with connectors on each end to pass power along to the next module. I cover this in a bit more detail in this video: kzbin.info/www/bejne/f3ezc4OJa9OCg7c Thanks for watching 😃
@Toucan10112 күн бұрын
Yo, I searched up the FREEMO thing and I found a model railroad club like 10-20 minutes away from me!
@ThatModelRailwayGuy10 күн бұрын
Awesome, always nice when that happens! Thanks for watching 😃
@quychang44712 жыл бұрын
Where did you get the alignment dowels? And is there a brand name?
@ThatModelRailwayGuy2 жыл бұрын
Hi there, these are the ones I used I think: amzn.to/39X1YPD Hope that helps and thanks for watching 😃
@thedreamtommylees3 жыл бұрын
Is this DCC or DC? Also how are you connecting each module for electric as I'm designing a small module layout that can be stored in storage boxes and it will be DC, but I have so many ways of thinking on how it should be done (connector blocks, plug n pin etc) also subscribed as very useful series
@ThatModelRailwayGuy3 жыл бұрын
Hi Tommy, at the moment the layout is wired for DC but I'll hopefully I'll be adding DCC into the mix soon and the plan is to be able to switch between the two. There's been a few other comments lately asking about how I'm wiring everything, so I'll definitely go into this in more detail in the next episode. Really glad you're enjoying the series and thanks for watching and subscribing 😃
@shaung753 жыл бұрын
You should post amazon affiliate links to what you're using. I'm looking for the guide dowels but can't find what I'm looking for
@ThatModelRailwayGuy3 жыл бұрын
I'm actually working on getting links sorted soon, although unfortunately most specialist model railway items aren't available through Amazon. Try StationRoadBaseboards.co.uk instead for the alignment dowels, that's where I got mine. Hope that helps and thanks for watching 😃
@Thomas__Blue3 жыл бұрын
But if the rails between boards aren't actually connected, how do you carry power from board to board?
@ThatModelRailwayGuy3 жыл бұрын
There's a set of bus wires under every board with connectors on that link all the modules together electrically. The power to the rails is then fed from the bus wires on each module meaning I get really reliable power all over the layout. Check out this section from a later episode to see it in a bit more detail: kzbin.info/www/bejne/anW1o6hrpd14nLM Thanks for watching 😃
@Thomas__Blue3 жыл бұрын
@@ThatModelRailwayGuy Just watched the video! Really like this series, learning a lot of interesting techniques. Thank you! Making sure to watch the rest of the series now before asking too many more questions. XD
@chrisuddin97603 жыл бұрын
Hi again - who did you say the company was who did your board ends?, were they expensive ??. Regards, Chris.
@ThatModelRailwayGuy3 жыл бұрын
Hi Chris, I used laserlab.co.uk but I'd recommended having a look around at other companies too as you might find a better deal. I went with them just because my endplates needed to be quite wide and they had a standard sheet size that was big enough. I think it cost about £20 to get 5-6 made. Hope that helps and thanks for watching 😃
@farmerdave79652 жыл бұрын
where do you get your alignment dowels ?
@ThatModelRailwayGuy2 жыл бұрын
Hi Dave, there's a link to them in the description 😉 Hope that helps and thanks for watching 👍
@kevindaniels66032 жыл бұрын
What's the name of the steel bullet bits to align the boards?
@ThatModelRailwayGuy2 жыл бұрын
Hi Kevin, they’re called Alignment Dowels. I got mine from Station Road Baseboards. Thanks for watching 😃
@kevindaniels66032 жыл бұрын
@@ThatModelRailwayGuy Thank you
@neilriley1023 жыл бұрын
Where did you get the end plates laser cut from?
@ThatModelRailwayGuy3 жыл бұрын
Hi Neil, I used LaserLab.co.uk but there's plenty of companies out there doing this so I'd say have a look round and find out which one is best for you. Thanks for watching 😃
@DMZforeverOG3 жыл бұрын
Are you able to share the name of the company you used to make the end plates? Also how did you design the end plates and what did you use to do so? Thanks
@ThatModelRailwayGuy3 жыл бұрын
Hi there, I used a company called Laser Lab who do custom laser cutting. The endplates were designed in Adobe Illustrator to the specifications set out by Laser Lab and then I sent the files over to them for cutting. Hope that helps and thanks for watching 😃
@DMZforeverOG3 жыл бұрын
@@ThatModelRailwayGuy Do you remember how much you paid?
@callumcamden9290 Жыл бұрын
How wide are your end plates
@ThatModelRailwayGuy Жыл бұрын
Hi Callum, 50cm to match the width of my modular baseboards but you could make them to any size really. Thanks for watching 😃
@crystalzues47123 жыл бұрын
What are the brand of the bullet connectors?
@ThatModelRailwayGuy3 жыл бұрын
Hi Matthew, I'm not sure if these are a particular brand but I got mine from Station Road Baseboards. They have lots of different sizes and configurations so plenty of options to explore. Hope that helps and thanks for watching 😃
@Mr_Tea_Rexx3 жыл бұрын
question how does the track get power?
@ThatModelRailwayGuy3 жыл бұрын
Hey there, I show this in Episode 6 so you may want to check out that episode for more info: kzbin.info/www/bejne/anW1o6hrpd14nLM Thanks for watching 😃
@BrianCorbett-up2iv Жыл бұрын
I think those laser cut boards are ideal. Do you sell them, or would you make them available for sale please. If not are you willing to share the drawings and supplier to save me (and other followers) the work to be able to use the idea. Thanks, Brian
@ThatModelRailwayGuy Жыл бұрын
Hi Brian, I don't currently sell the module endplates but it is something I'm looking at so I'm hoping to make them available in the future. Thanks for watching 😃
@carlos_niggli2 жыл бұрын
One thing, fremo is european an means ,,Freundeskreis europäischer modellbahner ''
@ThatModelRailwayGuy2 жыл бұрын
Yes but also used extensively by American HO modellers which is what I was referencing in the video. Thanks for watching 😃
@AmauryJacquot3 жыл бұрын
you should have used proper flux on those screws and at the time of soldering the rails to them
@ThatModelRailwayGuy3 жыл бұрын
Hi there, if I remember correctly I did use flux. You just don't see it in the video. Thanks for watching 😃
@BIASP994 жыл бұрын
First
@ThatModelRailwayGuy4 жыл бұрын
You're making a habit of this 😆
@jamessavage79874 жыл бұрын
4 th
@ThatModelRailwayGuy4 жыл бұрын
🤣 You're still just as welcome!
@benforster62543 жыл бұрын
Instead of saying 0 0, just say double 0
@ThatModelRailwayGuy3 жыл бұрын
I mean, it doesn’t really matter since they mean the same thing, so I use both. The next thing will be someone wanting me to clarify between double 0 and Dublo! 😂 Thanks for watching 👍