The BabylissPRO FaceOff!!!

[@suzettesmith586]

My baby silly, everyone should subscribe 😂. My goodness so much information, the memory is amazing 👏. Moma loves her baby 😘

[@CutsByReggie]

Everyone Should!!! I Love You Too❤️

[@glenzeray]

It’s this simple Reggie…. When the blade moves faster, it becomes harder for the hair to be fed into the teeth. You have to slow down to allow the hair to fit in. As opposed to a slower blade, where there’s more of an opening for the hair to fit between the blades. Think of it like double Dutch. Where are you more likely to get whacked by the rope when jumping in? When the rope moves fastest. Balding is when power isn’t as important as speed.

[@Exaltedmind2019]

That's a very smart answer

[@lremo002]

Genius. You my friend need to teach.

[@astrosanimelab2234]

Not going to lie, I adjusted my FX3 trimmer for over an hour to get it perfect. Never had anything like it. Literally the perfect trimmer for me. Doesn't hurt, and gives the sharpest lines of any liner i've ever used or seen

[@xadrian-.-blessindopefeind3169]

i think these guys just have harder touch because the fx3 is the best trimmer ever in my opinion even better then the regular fx

[@DCTONY159]

The blade barely moves for adjusting the FX3 any suggestions?

[@MrCatchafade]

Been using both of these for a few weeks. They’re both fire! Only reason you should go one way or the other imo is the lo pros can use the og, 2.0 and dlc blade whereas the fx3 can only use the fx3 blade and the lo pros use the same plug as all the other clippers and trimmers whereas the fx3 uses a completely different plug. When the blade is set right they both line and bald out smooth. Lo pros feel better in the hand imo

[@membersonly8547]

I have a modification video for the fx3 so you can use the OG or any other babyliss blade

[@11buttnaked]

Good Point

[@barberciscobarberfranky6354]

What about the extra 1.5 hrs of battery and the fact the lo pros aren’t as strong as the FX 3’s. That changes things a whole lot in my opinion.

[@FofXequalsYnot]

@@membersonly8547 which of d babyliss blades is best for shaving around d neck areas ? DLC , graphite 2.0 , or goldfx…

[@membersonly8547]

@@FofXequalsYnot gold fx

[@djallstyle]

I own the FX3 & you’re 100 correct about the blade. Not sure why they wouldn’t use the blades they have? I love the ergonomics & etc. too. I don’t own the LoPro(yet) however, I tested them at the Midwest Hairshow & they will smack the breaks off some of your favorite trimmers, including the skeleton FX.. I have a pair otw… There’s too much ish to keep up with!! 👍🏾

[@membersonly8547]

I have a modification video for the fx3 so you can use the OG or any other babyliss blade

[@prestonwingate7836]

My favorite trimmer now!

[@Ryan-bz4iw]

I agree I think babylis should come out with black version of fx3 and change blade or slight modifications bc seems like blade eventhough it's sharp it don't cut same as other blades...Also fx3 shavers in babylis color black/ red would be nice

[@wanhuar8654]

You can put regular fx blade on fx3 trimmer with slighty filingndown a plastic

[@Ryan-bz4iw]

@@wanhuar8654 didn't know that thanks for information

[@dc_crush]

Still rocking my custom fx. I don’t see the need to update personal especially when Babyliss put rubber grip on the other FX now but not on these two or their newer clippers

[@CutsByReggie]

I can understand that. And the Fx are still a great trimmer.

[@Ryan-bz4iw]

@@CutsByReggie are rubber grip for fx sold separately is it just sleeve

[@mb101367]

I use both of them when cutting my hair. They're both great to me. I use the FX to cut thru my bulk and it cuts very close.

[@shanur]

Dope comparison 🔥🔥🔥 you’re literally at the cusp of 5k btw, congrats 🎉

[@CutsByReggie]

👌🏾 Almost

[@raymuccianti9438]

My lopro trimmers blade ran super hot after a few minutes of use and that black dlc blade was catchy as hell! Went back immediately (yesterday). I was definitely disappointed. Never had my Andis T-Outliners have either issue.

[@classicbarberacademy]

Bro you are so real and I really enjoyed watching your reviews bro, keep it up.

[@tightcutz624]

FX-3 They are very sharpe. But for sure after broken in they get to that sweet spot. After using them to bulk out and just a a little soft hand they can become an all day trimmer (until you get to the young ones) hehehehe

[@joelfranco4946]

The young ones will cry😂

[@jokerboi526]

You do good videos man. "so if you havent made up an account for your grandmother" 🤣

[@TravelbyNick.]

See, I keep having issues where some clients say it’s great and other say it hurts a little (FX3). I adjust them down so they are not so close and it still hurts some people. I’m a pro at adjust blades since it’s been 18 years of me doing it. I just wonder if it’s the blade itself now.

[@prestonwingate7836]

I had this same issue but I finally got it perfect, but it took a couple of tries. At first I thought the blade was flawed

[@brysonbam679]

Bruh!!! I don't know if I have faulty Fx3 AND FX.... but the blades don't sit properly and the bottom blade is always going over the still blade. Like there's too much play in there or something..... Have you ever experienced this and found a fix??👀👀

[@membersonly8547]

I have a modification video for the fx3 so you can use the OG or any other babyliss blade

[@desmondmitchell5602]

It moves when you got it tight right like left to right lol it's a bad blade get another one

[@brysonbam679]

Man!🤦🏾‍♂️ I've had 3 blades for the Fx do the same..... then I gave the fx3 a try ANNND.... SAME!!! I think its not meant for me to use em🥴🥴🤬

[@membersonly8547]

I have a modification video for the fx3 so you can use the OG or any other babyliss blade

[@fadedbyvar6142]

Reg the man keep it going bro much love and respect 💯💪🏾

[@nachogetsstrong]

I put the dlc blade on the fx3

[@joecruzjr5979]

Been waiting on this video 👌🙌

[@CutsByCruze]

Definitely needed this info! Thank you!

[@KottoKTG]

Cuts By Reggie giving us the good information again! Thanks man.

[@FofXequalsYnot]

He’s dwelling too much on packaging…🙄 He should dwell more on technical details…😎 👍🏽cheers still👍🏽

[@desmondmitchell5602]

This is going to be good

[@DarrenKNelms]

Dope review 💯 Glad I checked in with you before the purchase , and got the put on with a Discount code 😹!!

[@miguelpineda4338]

Thanks for the reviews bro 🔥

[@terencemillet9813]

Yes Reggie... give the people and clipper companies what they want and need to hear.

[@marquiezharris879]

Lo pro got that zero gapping tool in there to

[@airjordanian1989]

Can I buy a custom corded t outliner signed by Reggie?

[@jmax850]

Loprofx is better than Andis GTX Exo too?

[@joecruzjr5979]

Hell yeah

[@fused7031]

i love this nigga

[@adamlightner3171]

Awesome Reggie I'm copping that lo pro!

[@jugheadzthebarbershop5541]

How long did it take you to get the DLC blade going? I’ve been using it for 3 days now and it’s a rough cut, not smooth at all and it doesn’t leave crisp lines. I’ve zero gapped it like 7 times and still haven’t found a sweet spot

[@CutsByReggie]

That’s one thing I hate about the DLC blade, it was almost 2 weeks before they actually felt like they started to work.

[@jugheadzthebarbershop5541]

@@CutsByReggie ok good to know!! Thanks bro

[@krayslay5847]

Influencers dlc hit 100% str8 outta the box for me, and they stayed like that so far, and they're quieter than lo pros! top trimmers over all babyliss trimmers for crispy lines AND de-bulking as well

[@marvelfrank5444]

Just bought the FX3 I adjusted the blade because they would bite right out the box, and they don’t bald out they pull hair on some hair once I adjusted it

[@vanlierscott8506]

Cool video, Reggie!! I’ve been cutting my own hair for 15 yrs & bought the FX & the Lo Pro! I’m not impressed w/ the DLC 2.0 blade or the Lo pro trimmer! I put a graphite (fine tooth) blade on the Lo Pro & they still wasn’t giving me that nice line up like the FX w/ graphite! I’m buying the FX3 & will buy the gold fx blade for the Lo pro to see if that will do the trick but the FX skeleton w/ graphite or the gold fx blade is still the best IMO!!

[@vinsa518]

Did the gold fx blade make a difference on the lowpro?

[@codeyclarke6849]

I've been a Barber for the past 5.5 years, and Also, I can't stand the DLC blade I don't know what they did to it, but it's nearly impossible to zero gap to a point where you get sharp lines without irritating peoples skin and when it's not set close it just does not hit whats so ever

[@tyionallen6357]

Great video 👊🏽

[@sense321]

How does the LoPro trimmer hit now that you got the gold blade on it?

[@coopercoop9371]

Yes bra I agree so sharpe I can't get it right but I love them I don't know what to do . Help me out .

[@membersonly8547]

I have a modification video for the fx3 so you can use the OG or any other babyliss blade

[@coopercoop9371]

@@membersonly8547 ok fam

[@franciscoguzman881]

What ever happened to the x evo with gtx blade

[@jeremyrojas8942]

X Evo with the gold FX blade 🔥🔥🔥🔥 with #filthyblendz mod

[@1sikogansta]

I just bought a low pro my box shows it at 4 hours of run time I think they both got 4 hours

[@Jamaal_Eye_Ball]

This is great information sir

[@CutsByReggie]

🙏🏾 Thank you.

[@raze2400]

My GTX andis just broke, which of these 2 would you recommend doing my own beard?

[@oscargomez6190]

Fx3 sound quiet 🤫 LoPro little loud but both look like they're well built machines

[@jaysteph2978]

I don't know what it is but my fx3 seems to snag when I'm clearing bulk under someone's neck. Also, for some reason the idle time is not great as the other babyliss trimmers. Is anyone else have these problems with their fx3? Or, is there something I can do better?

[@membersonly8547]

I have a modification video for the fx3 so you can use the OG or any other babyliss blade

[@jaysteph2978]

@@membersonly8547 bro, I just watched your video and I'm impressed. My ass too afraid to do it cause I'm scared i might some shit up lol! I also liked and subscribed to your channel as well.

[@membersonly8547]

@@jaysteph2978 appreciate you definitely bro

[@hardtop510]

Caliber .22 stinger trimmer with GTX-Z blade is legit

[@dailygrindbarber1177]

much needed video

[@barberciscobarberfranky6354]

You’re my guy for real! I value your opinion…… BUT…. Just like most barbers on KZbin…. We need to educate ourselves on the technical aspect of these machines. We need to learn te difference between SPM(spins per minute) and RPM(revolutions per minute). There really isn’t a difference but it’s the cause and affect. Why some have a higher SPM than RPM’s on another. It’s crucial to reviewing these machines accurately. It’s pretty simple…. TORQUE!!!! The higher the RPM, the less torque it has, the lower the rpm’s are, the higher the torque is. Just like detachable blade clippers. They have 2500-3500 RPMs but we wouldn’t say they aren’t strong right? Hit me up Reggie, we will really get into this subject whenever you’d like

[@CutsByReggie]

I appreciate that guy and that is one thing I have been tryna prep myself is more of the inside of the machines.

[@barberciscobarberfranky6354]

Thank you for not taking it the wrong way also. Just shows how much of a genuine guy you are. #Salute

[@xaviercordova2705]

Can you do a video how to adjust that fx trimmer

[@waltercruz9651]

Can you review shears? And how we can sharpen old ones

[@big_burly_bro]

Babyliss is the best overall brand. Dethroned Wahl for me. If I could only use one make it'd be Babyliss. Not that I don't think there's other companies making good products.

[@waltercruz9651]

Lets get that 5k and beyond.

[@coopercoop9371]

Everyone I cut it cuts there skin then when I adjust them guess what they not so sharpe

[@membersonly8547]

I have a modification video for the fx3 so you can use the OG or any other babyliss blade

[@heavychevy4616]

...well, looks like grannys gettin a subscription to cuts by reggie! (haha) ...great comparison video, thank u

[@CutsByReggie]

😂 Get her on over here!

[@edgarluna2327]

Hey Reggie, I really wanna cop those FX3 trimmers but I'm the type of guy who loves charging stands. I heard Babyliss said they were gonna make charging stands for the Lo Pros (both clipper and trimmer). Since they're more likely to listen to you, you know cuz you a KZbinr and all, you think you could get in touch with Babyliss and ask if they'll make charging stands for the FX3? I'd appreciate that, bro.

[@IvMacCuts]

This felt very serious 🤔 could be the flannel but I like it 😅. Oh and grandma is already watching so....

[@andystylez]

Lopro fx are 🔥

[@MrEdge696]

Great Video!

[@702beastside]

If I have 2 gold fxs that i love lol, are the low pros worth getting?

[@jayhdz9856]

Same question here lol

[@tony21084]

Fx3 for me🔥

[@42jofox]

Okay so, I bought the Lo pro's and I love the way they look. I don't think they are comfortable to hold when lining up. They are for balding though because they are shaped like a clipper but I bought them for lineups only. The power switch is difficult to get used to because its on the side. I think I'm going to sell it and get one of the FX skeletons like the Patty Cuts. Good video btw.

[@Powderr4]

Fx3 im not feeln tha shape angleed back to far

[@Jamaal_Eye_Ball]

Anyone know where I can buy a dlc 2.0 blade?

[@CutsByReggie]

www.barbersupply.com/clipper-trimmer-blades/babyliss-pro-fx707bd2-dlc-2-0-deep-tooth-trimmer-blade/

[@membersonly8547]

eBay

[@jugheadzthebarbershop5541]

The DLC is not as good as the gold Fx blade!!! I actually dislike this blade cuz it don’t cut very well

[@skisgy]

I charge $50 and your clipper reviews will get me to $60

[@moe_barber83]

🔥🔥🔥🔥

[@_mattcuts2984]

Sup Reggie 🙌

[@GT-dn9sl]

The blade on the fx 3 is why it doesnt bald out smooth that blade is the worst I had to convert mine to use the gold fx 787 blade and had to buy a gold fx 787 blade I deserve a blade refund from babyliss for the fx 3 blade

[@360xtremephotobooth8]

🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

[@pandavinchy]

Back it again with another great video 💪🏼 in my personal opinion the LoPro’s are not it. They just feel way weaker compared to the other 2. Feel like if they upgrade the motor on it they will be 1,000x better

[@MrMakaveli2786]

Man this guy struggling to talk

[@The667tony]

It's there not dur. Inventors of idiocy

[@hardtop510]

what clipper has 10,000 rpm ?

[@dc_crush]

Gamma Ergo

[@hardtop510]

@@dc_crush is RPM and SPM the same thing ? because the ergo is 10,000 SPM and not RPM

[@classicbarberacademy]

Bro you are so real and I really enjoyed watching your reviews bro, keep it up.