I appreciate all of the time and effort you take to not only document your process but also illustrate it in a way that breaks the language barrier. You go above and beyond for us and I thank you for it!
@mtmwood9 жыл бұрын
I made the material for this video a year ago.:) Thanks!
@valimel9 жыл бұрын
One of the best tutorials in KZbin, not only for cutting boards, also for beginers woodworkers, i have a workshop since a long time, but i wish i had all this info when i started, THANKS FOR YOUR EFFORT, and for the one that dislike this video, just say why?, why dislike a video where someone that is probably the best person making cutting boards puts all his knowledge for free?
@mtmwood9 жыл бұрын
Thanks for watching!
@akivazohar25023 жыл бұрын
Fantastic It lays out all the details that are often rushed over in other videos This is one that I will go back to for guidance Thanks
@brukernavnfettsjit9 жыл бұрын
Thank you for sharing! I LOVE the level of detail you put in to this. Very nice to learn about different wood grains and drying/wood movements. Many (me included) find wood movement and drying a daunting subject.
@mtmwood9 жыл бұрын
Thanks! It is impossible to make good cutting boards without this knowledge. Thanks!
@kevindumais96109 жыл бұрын
Wow I never realized how much work goes into making one of those cutting boards, but you still make it look easy!
@mtmwood9 жыл бұрын
I think that cutting boards should be made more carefully than furniture. You may do small mistakes in making furniture, but not in cutting boards.:)
@nro5429 жыл бұрын
mtmwood How true...
@mtmwood9 жыл бұрын
Larry Maykin Only few people think so.:)
@larrykinman87915 жыл бұрын
What bits do you use for inlays?
@terrycox21658 жыл бұрын
Great tutorial sir. Well put together and easy to understand. Thank you and keep up the awesome work.
@hotrodhog21706 жыл бұрын
Thank you for sharing your methods of making these beautiful boards! Спасибо, что поделились своими методами создания этих красивых плат!
@Janogomez907 жыл бұрын
Thanks for taking your time to kindly explain the process with such detail and simplicity. I think you really have a fine, educational, technical and artistic channel. All my respects and admiration!
@johnarnold44319 жыл бұрын
This is te best video I have seen on the basics of cutting board construction. I am just starting out in wood working, and am always looking for adivice and ideas. IMO, you are the best. Thank you.
@mtmwood9 жыл бұрын
This tutorial is mostly about working with wood. Thanks for watching!
@nro5429 жыл бұрын
I have made thousands of end grain boards but always learn something new from your videos... waiting the the next instalment...
@mtmwood9 жыл бұрын
Me too.:) Thanks Larry!
@viacheslav-nikolayenko9 жыл бұрын
Поистине настоящий мастер! Не делаете тайны из своей работы.
@mtmwood9 жыл бұрын
Спасибо!
@harvesthunt5 жыл бұрын
Thank you for sharing your knowledge and passing on the skills! It's great that you share with us.
@pmelchman9 жыл бұрын
Andrei, this is a fantastic video for all new and veteran woodworkers. It is filled a great foundation of knowledge to build on. I need to do some research on the humidity in my garage / shop. I am glad that you used basic wood working tools , ( 12" planer) to show people that it can be done. The segment on clamps was awesome. Pipe clamps are also cheaper then the bar clamp style. It makes me laugh how people stressed out because of the fact that you don't speak in your videos......well in some of your earlier videos, you spoke Russian ....... and guess what?...... I didn't understand anyway. ...... I salute you Andrei. Its your choice, its your video. I look forward to the next video and am ready to learn and put to practice on my next cutting board. Best Regards to you and your family...... Patrick Melchior Work hard, live well, and relax
@mtmwood9 жыл бұрын
Thanks, Patrick! I speak in my Russian videos, but not a lot. I want to show my work, not speak. Good luck!
@nippychippy9 жыл бұрын
Thank you for taking the time to make this video I love you work
@mtmwood9 жыл бұрын
Thanks for watching!
@AKguy744 жыл бұрын
Век живи, век учись!
@JesusvonNazaret9 жыл бұрын
great video, thanks for all the work making it and teaching us how to make these cutting boards
@rbollard19 жыл бұрын
My thanks for sharing your experience and techniques with all of us. I for one will be a much better board maker because of your sharing.
@mtmwood9 жыл бұрын
Thanks for watching!
@fdc3139 жыл бұрын
some good tips I haven't thought of, I am looking forward to the part 2
@mtmwood9 жыл бұрын
Tomorrow. Thanks!
@AlFurtado9 жыл бұрын
You do great work my friend, I love seeing your creations.
@mtmwood9 жыл бұрын
Thanks for watching!
@Aussie6319 жыл бұрын
Thank you so much for a truly great video. You make it seem easy enough for a novice like me to attempt. Great work!!!
@mtmwood9 жыл бұрын
Thanks for watching!
@LouAdzima9 жыл бұрын
Great Video. I ordered my first CNC machine today, from seeing the magic you do.
@mtmwood9 жыл бұрын
Congrats!
@TheJimsock9 жыл бұрын
Nice to have the science explained. Thank you.
@MRrwmac9 жыл бұрын
Very good lessons and tips! Thank you for taking the time and making the effort to help us make good end grain cutting boards!
@mtmwood9 жыл бұрын
Thanks for watching!
@amx30009 жыл бұрын
Очень интересно, спасибо! Всегда с удовольствием смотрю Ваши видео.
@mtmwood9 жыл бұрын
Спасибо!
@JohnBare7479 жыл бұрын
Excellent presentation. I made cutting boards for Christmas presents last year this would have help me a lot. In the end I did mine more or less exactly as you have shown, by shear blind luck on my part. Thanks!
@mtmwood9 жыл бұрын
Thanks for watching!
@my520graj9 жыл бұрын
We can call it boardingpedia. Very interesting, good video as always.
@mtmwood9 жыл бұрын
Thanks for watching!
@buckeyewoodshop9 жыл бұрын
Thank-you! That was an excellent tutorial for a beginner to learn the basics.
@mtmwood9 жыл бұрын
Thanks for watching!
@norm11249 жыл бұрын
Wow, thanks for this many in depth imformations. And especially for the consequent use of all safety measurements.
@mtmwood9 жыл бұрын
Thanks for watching!
@shroboy079 жыл бұрын
Thanks for making this. It helps with a few questions i had about end grain cutting boards.
@mtmwood9 жыл бұрын
Thanks for watching!
@tooljunkie5559 жыл бұрын
very nice!! answered my questions.. i need to get different glue also
@apophysis29 жыл бұрын
Thank you very much for the in depth instructions. Really great.
@mtmwood9 жыл бұрын
Thanks for watching!
@user-mi2zc6ik7y9 жыл бұрын
Повтор инструкции лишней не бывает, да и после просмотра ваших видео руки чешутся ;) Даешь продолжение в массы! ))
@mtmwood9 жыл бұрын
Через полчаса.:)
@hspringsteen9 жыл бұрын
Thank you for sharing this. I learned quite a lot.
@mtmwood9 жыл бұрын
Thanks for watching!
@blackemmons9 жыл бұрын
That was a great tutorial. Looking forward to part 2. I really appreciate your taking time to do it and sharing it with the woodworking community. The only thing I can see missing are "two shop helpers". :-) Thanks again. JimE
@mtmwood9 жыл бұрын
I made this video a year ago. They were small.:) You will watch Part 2 tomorrow. Thanks!
@stevesteves89159 жыл бұрын
Thanks very much for sharing this - looking forward to part2
@mtmwood9 жыл бұрын
Tomorrow. Thanks!
@MarcOlivierBlanc19 жыл бұрын
Thank you for sharing with us all this knowledge and experience. If I ever get to the point of making one or two : I'll offer you the first one :).
@mtmwood9 жыл бұрын
Thanks for watching!
@gustavopenteado77699 жыл бұрын
Once more, congratulations about your fine work. You are not a woodworker, but a WOODMASTER. Still waiting for an overview of your workstation and all the machienery
@mtmwood9 жыл бұрын
This year.
@robc47989 жыл бұрын
Awesome video! Thank you for taking the time to share your process with us, I can't wait for the next part.
@mtmwood9 жыл бұрын
Thanks for watching! Tomorrow.
@legacyofbob9 жыл бұрын
Thank you, this is great advice and very comprehensive instruction.
@mtmwood9 жыл бұрын
Thanks for watching!
@tamaselkan89029 жыл бұрын
Great instructional video, thank you ver much for sharing! I am looking forward o the following episodes. I am sure this series is going to be the "bible" of how to make great end grain cutting boards:)!
@mtmwood9 жыл бұрын
Thanks for watching!
@TheSilverAzide9 жыл бұрын
thank you so much for showing this : ) Your work is art and I sure couldn't do it, however I hope that one day I can do the basics. Thank you
@mtmwood9 жыл бұрын
Nana Wolf Thanks for watching!
@decimomaximomeridio19 жыл бұрын
Excelente video y muy instructivo. A esperar la segunda parte. Muchas gracias por compartir. Saludos desde México
@mtmwood9 жыл бұрын
Gracias!
@Smirre829 жыл бұрын
Excellent tutorial! Thank you very much!
@mtmwood9 жыл бұрын
Thanks for watching!
@ThePhamFam9 жыл бұрын
Very helpful tutorial.
@mtmwood9 жыл бұрын
Thanks!
@whitewolf87589 жыл бұрын
Great job a very thoroughly explained how to video!
@mtmwood9 жыл бұрын
Thanks for watching!
@ashishvatchas9 жыл бұрын
thanx for sharing your experience.
@mtmwood9 жыл бұрын
Thanks for watching!
@andrewfraser43929 жыл бұрын
Many thanks for a very instructive video. Unfortunately I don't have a planer, so it's not possible for me, but I can still enjoy watching and learning
@mtmwood9 жыл бұрын
Thanks!
@AshishPatel-sy6tv2 жыл бұрын
Very nicely done video..!! And, precise explanations..!! Sir.. have you been a teacher..??!!
@lifeiswonderful79869 жыл бұрын
This is an excellent tutorial! Great job!
@mtmwood9 жыл бұрын
Thanks for watching!
@woodandmetalandstuffpauldo85619 жыл бұрын
This was a great and very informative video, Thank you mtmwood
@mtmwood9 жыл бұрын
Thanks!
@41111168 жыл бұрын
Thank you for your videos.
@michaelflynn61789 жыл бұрын
Thankyou that was very helpful i look forward to the next part
@mtmwood9 жыл бұрын
In a few hours. Thanks for watching!
@EdsonOseas9 жыл бұрын
Um grande abraço aqui do Brasil. Muito obrigado por compartilhar. :-)
@mtmwood9 жыл бұрын
Edson Oseas Спасибо за просмотр!
@RoboCNCnl9 жыл бұрын
Amazingly informative, great video, cant wait for the next.. Ps... I thought you would finally reveal why you always use one glove when tightening the clamps, but no... It remains a mystery.. lol
@mtmwood9 жыл бұрын
I wanted to get away from this question here, but I couldn't.:)
@MrKikoboy9 жыл бұрын
He answered that before - you should check back through all his other videos!
@azduststorm228 жыл бұрын
I made one from poplar and oak and it turned out pretty good
@mjrwey8 жыл бұрын
+TK WX Oak has wider pores so it has a greater tendency to trap bacteria. Just something to be aware of when washing it, maybe give it a little extra attention
@azduststorm228 жыл бұрын
+Matthew R i didnt mean a cutting board, i was talking about a different project. No i made a board out of purple heart and yellow heart
@mtmwood8 жыл бұрын
+Matthew R Oak is the best wood to kill bacteria - mtmwood.com/?route=information/information&information_id=13
@alexsenst44037 жыл бұрын
mtmwood your an inspiration! My i created my cover photo with your help!
@pedrohernandez65389 жыл бұрын
Hola mtm, quisiera hacer una consulta sobre una herramienta que usted utiliza. Quiero comprar una lijadora plana de rodillo estacionaria de 1 solo rodillo, la que usted utiliza es de 2 rodillos. Mi pregunta es , al ser de 1 rodillo que tipo o numero de grano de lijar debería utilizar? Muy gordo para dejar plano o fino... no se , podria ayudarme con pequeña explicacion. Un saludo desde España y muchas gracias
@wzukr9 жыл бұрын
"The grain cut board -makers basics, part1" brought to us by Andrei. I can´t thank you enough for this vid! I also would like to know if one can use stabilised wood for this work, benefits and drawbacks?
@Zerkbern9 жыл бұрын
Thanks for the effort in making this series! I would love to hear your verbal comments as well...even if they are in another language w/ subtitles.
@mtmwood9 жыл бұрын
I will make a shop tour in Russian soon. Thanks for watching!
@abidalica9 жыл бұрын
Your the best
@johnconklin90399 жыл бұрын
Very good information, thank you
@mtmwood9 жыл бұрын
Thanks for watching!
@pablocabilla8859 жыл бұрын
thanks for sharing your art
@mtmwood9 жыл бұрын
Thanks for watching!
@BackyardWoodworking9 жыл бұрын
Good information.
@mtmwood9 жыл бұрын
Thanks!
@akakemushi4396 жыл бұрын
This is a very informative video!! Thanks for making it! Is there a bigger list of wood properties like the list at 4:40 somewhere online? I don’t have access to most of the woods on that list unfortunately.
@simon_far8 жыл бұрын
Is there a specific reason that you cut it into little blocks? Can you not just glue strips of endgrain together to make a board? Thanks for the videos, they are very clear and informative.
@mtmwood8 жыл бұрын
+simonfarquharson The reason is shrinkage. The smaller the pieces of wood, the more stable and durable is the board.
@christopheadvielle37199 жыл бұрын
Very interesting ! Thank you
@mtmwood9 жыл бұрын
Thanks!
@dietermayr58889 жыл бұрын
Thank's for your great and very informative videos! What do you think of using european beech for a cuttingboard ? I have a bunch of scraps and leftovers of european beech wood that would add up to a nicely sized endgrain board.
@mtmwood9 жыл бұрын
I think that beech is one of the worst woods for end grain cutting boards. It is very hygroscopic and has a highest shrinkage. www.wood-database.com/lumber-identification/hardwoods/european-beech/
@dietermayr58889 жыл бұрын
mtmwood Thanks! I found some quiet contrary thoughts about wood-movement of beech. I think i will just glue together some of the scraps I have around, soak them with oil like I would a cuttingboard and see how they develope in our kitchen. I do not have any hurry as I have a nice oak endgrain board already, but hey, one can never have too many cutting borads ;)
@mtmwood9 жыл бұрын
Dieter Mayr Beech is a very popular wood for cutting boards in many countries. This is a dense and cheap wood. But I don't like it. The smaller pieces of beech you use the better. And glue them in proper direction. The movements of these pieces should balance each other.
@martind.49303 жыл бұрын
Andrey, do the size of the stripes matter? I want to build some end grain cutting board from scrap maple stripes. I have several width. For the first glue-up, do I have to resaw the stripes all the same width or would it be OK to glue together a mix of 1'' width, 2" width, 1.5" width, 3'' width? Until I reach my desired total width.
@mtmwood3 жыл бұрын
No, it doesn't matter. But don't use too wide strips. The wider is the strip the more the board will be prone to cracking. Usually I don't use strips wider that 2"
@davidbreazeale8209 жыл бұрын
Thanks for the video. I did the google search for the pipe clamps, however, could you post the link to the type you displayed .
@mtmwood9 жыл бұрын
David Breazeale I use this, the most popular type of pipe clamps. Not Pony, but China made. Cheap and good. www.ebay.com/itm/PONY-50-Clamp-Fixture-for-3-4-Inch-Black-Pipe-Wood-Working-Free-Shipping-NEW-/251818904500
@Aussie6319 жыл бұрын
Hi Andrei What range of hardness of wood would you suggest to use? I have looked up Walnut and Maple and they seem to be around the 1000 lbf - all the Australian hardwoods seem to be above 2000 lbf. Would that be too hard? Cheers André
@mtmwood9 жыл бұрын
Janka hardness: Hard maple - 1,450 lbf (6,450 N) Black walnut - 1,010 lbf (4,490 N) Purpleheart - 2,520 lbf (11,190 N) The hardest wood I worked with is azobe - 3,220 lbf (14,330 N). It is like glass after sanding. I think the best range is from 1000 to 1800 lbf, maybe up to 2000. I like European oak - 1,120 lbf (4,980 N).
@pedrohernandez65389 жыл бұрын
Este video en castellano tendría muchas visitas...jejeje
@davidross76749 жыл бұрын
andrie , what do you do to or with your glue roller to be able to reuse it again and again. and do you recommend wiping down your cutting boards with denatured alcohol after finish sanding and before treating with mineral oil.....thanks so much
@mtmwood9 жыл бұрын
David Ross kzbin.info/www/bejne/oV6UemmvarWtask No, I do not wipe the board.
@joahuamartin839 жыл бұрын
This may be a dumb question, but how do you keep the glue roller from drying up when you're not using it?
@mtmwood9 жыл бұрын
+Joshua Martin Not dump, many people ask the same - kzbin.info/www/bejne/oV6UemmvarWtask
@keithketcham58059 жыл бұрын
Thank you!!
@mtmwood9 жыл бұрын
Thanks for watching!
@pedrohernandez65389 жыл бұрын
Ok, intentare traducir. Por favor mtm una última pregunta, una sierra de 1500w o 2hp cortaría esa madera sin problemas? Lo siento.. Perdón por las preguntas pero me cuesta entender muchas cosas y creo le pregunto al mejor que he visto . Gracias
@mtmwood9 жыл бұрын
Ты имеешь в виду 2HP Makita 2012? Он хороший, но для изготовления торцевых разделочных досок у него не хватает мощности.
@dannycruz24808 жыл бұрын
what kind of brush do you use on your paint roller when applying glue? i just tried to do this using the only painter roller i had around, and the brush seemed to just suck up most of the glue and not spread it around very well. thanks for the video!
@mtmwood8 жыл бұрын
+Danny Cruz kzbin.info/www/bejne/oV6UemmvarWtask
@ryszardtrunk98029 жыл бұрын
Witam cie gdzie mogę kopić ściski które pokazujesz na filmie chodzi o te które wyjmowałeś z pudelka i zmontowałeś na rurkach z pozdrowieniami Ryszard
@mtmwood9 жыл бұрын
Ryszard Trunk Google "pipe clamps woodworking" to find them in your region.
@bavarasshi6 жыл бұрын
Plz make and show me different kind of wood hanging lights 5pcs like that
@pedrohernandez65389 жыл бұрын
Gracias por compartir mtmwood. Es maravilloso lo que haces. Una pregunta que habrás contestado muchas veces, pero no se idioma, que líquido es el que sumerges la madera al final? Un saludo desde España ...
@mtmwood9 жыл бұрын
No entiendo la pregunta. Ahora estoy en España.
@MrKikoboy9 жыл бұрын
I believe he uses mineral oil and then after draining he applies a mixture of 3-4 parts mineral oil melted with beeswax...
@mtmwood9 жыл бұрын
MrKikoboy Right. I will show this tomorrow.
@modelismepassion44936 жыл бұрын
Bonjour, Super intéressante cette vidéo sur les bases de la fabrication de planches à découper. Y-a.t-il une version française. Merci d'avance de votre réponse. Yves Hello, Super interesting this video on the basics of making chopping boards. Is there a French version? Thank you in advance for your response. Yves
@mtmwood6 жыл бұрын
Unfortunately no
@modelismepassion44936 жыл бұрын
tant pis, never mind
@juridzh9 жыл бұрын
Здравствуйте, я тут себе трубных струбцин в "мастерскую на балконе" купил, долго смотрел в магазине на черные и оцинкованные трубы. Оцинкованные с виду куда аккуратнее и чище. Вы используете черные судя по всему, чем то конкретным руководствуетесь? Понятно что цинк обдираться будет, но может еще какие минусы есть а я про них не знаю :) З.Ы. Спасибо за Ваши видео! Прекрасная работа!
@mtmwood9 жыл бұрын
У меня были оцинкованные. 1. К ним крепче прилипает клей 2. Их диаметр немного больше черных, трудно нарезать резьбу 3. Они дороже Спасибо!
@deweyradabaugh92199 жыл бұрын
I've watched many of your videos and have learned many facts about cutting boards from your video presentations. How ever, I still have an occasional warpage in some of my boards. Any suggestions on how to prevent the warpage?
@mtmwood9 жыл бұрын
+Dewey Radabaugh The main reason is the wood and air humidity.
@deweyradabaugh92199 жыл бұрын
Why the wood? Do you mean species of wood? Or to many pieces with grain going in same direction? If you have a video that helps explain this, let me know. I really want to improve my products.
@mtmwood9 жыл бұрын
Dewey Radabaugh I meant wood humidity, the moisture content. Use only kiln dried wood, about 8% moisture content.
@deweyradabaugh92199 жыл бұрын
I'll check with the lumber mill on my next order. They have kiln dried wood, but i'll check with them on the moisture content. Thanks for the advice. And again, you do great work.
@Boomers_Bud9 жыл бұрын
Awesome video. I will leave it at that. :D Derek
@mtmwood9 жыл бұрын
Thanks for watching!
@ryanpappas62087 жыл бұрын
Love your boards. Very inspirational. I have a question. I am getting black stains mainly on my maple after glue ups. I thinks it's the black from my pipe clamps. How do you avoid this from happening?
@mtmwood7 жыл бұрын
Me too. They disappear after planing. Thanks!
@pedrohernandez65389 жыл бұрын
No es makita, es una sierra escuadradora muy parecida a la tuya pero de 1500 watios 4000 revoluciones por minuto... Por eso te preguntaba si servía para cortar ese tipo de madera
@mtmwood9 жыл бұрын
Да, его можно использовать.
@jean-marcfrance49299 жыл бұрын
Hello, I love your videos (from France) How do you remove glue on the iron pipes? because glue tends to rust. thank you very much
@mtmwood9 жыл бұрын
I do not remove it. Dried glue can be easily removed when you move a movable jaw (head). When you can't move it just hit by the metal clutches at the edge of the bench. And use "black" pipes without any covering. Thanks!
@crmusicproduction8 жыл бұрын
is using soft and hard woods together?
@mtmwood8 жыл бұрын
No
@eraalza8 жыл бұрын
Hi, Do you know if the europian birch is suitable for endgrain gutting board?
@mtmwood8 жыл бұрын
+eraalza Yes.
@timbrumfield88729 жыл бұрын
Great video. Very informative. Just curious, what brand of table saw is that? It is very large.
@mtmwood9 жыл бұрын
It is SC-30, Griggio, Italy. It is not small and powerful.
@mitchs22819 жыл бұрын
I'm new to woodworking so I don't have a planer yet. All the steps that use the planer can I sand instead??
@mtmwood9 жыл бұрын
mitchs2281 Yes, you can, but it is a waste of time, labour and quality. 10-15 years ago nobody had a planer in the shop, but the boards were making.:)
@mitchs22819 жыл бұрын
ok. I was afraid you were going to say that. Guess I will have to get a planer. Thanks. Love your videos. One day I hope to make a cutting board as good as yours.
@Minzmarshmallow9 жыл бұрын
Can I use douglas wood too for Cuttingboards? I like the rosy tone in the wood
@mtmwood9 жыл бұрын
+Mimi Minzmarshmallow I've never used it.
@Minzmarshmallow9 жыл бұрын
+mtmwood World like to see u trying it some time ^^ love ur work
@pedrohernandez65389 жыл бұрын
Joooo...como me gustaría entender este video... Una pena no saber mucho inglés... Mil gracias de todas formas
@mtmwood9 жыл бұрын
Gracias!
@hamercalif7 жыл бұрын
Жаль, что весь комментарий на английском. И платные схемы тоже.
@oleksandr37899 жыл бұрын
Скажите, а от чего может "повести" уже готовую доску? (имею ввиду склееную, отшлифованную и обработанную маслом). Влажность в новом помещении? Влажность дерева? Спасибо заранее.
@mtmwood9 жыл бұрын
Aleksandr Kalashnik Доска впитывает влагу из воздуха и отдает ее при изменении влажности. Никакое покрытие, в том числе лак, краска, масло, не способно этому противостоять. Тем более минеральное масло, которое не образует твердую пленку. Для каждого значения влажности воздуха и температуры есть свой показатель влажности древесины, которая усыхает и расширяется. Это учитывается и при изготовлении мебели. Скачайте учебник по ссылке в описании, там подробно это описано.
@oleksandr37899 жыл бұрын
mtmwood Спасибо, Андрей. Будем учить матчасть. Одну из 20-25 досок "ведет". При чем то ясеневу, то дубово-ясеневую, то ореховую. Хотя остальные из того же распила и той же партии сушки - нормально. Спасибо за быстрый и внятный ответ.
@mtmwood9 жыл бұрын
Aleksandr Kalashnik Если одну из..., то обратите также внимание на расположение годичных колец в соведних делянках.
@oleksandr37899 жыл бұрын
mtmwood понял! Обязательно проверю. Спасибо еще раз!
@sebastianpintea99459 жыл бұрын
Hy, I'm from Romania and I want to know where can I buy such pipe clamps parts.
@mtmwood9 жыл бұрын
Sebastian Pintea Ebay, Amazon. Google "pipe clamps woodworking".
@sebastianpintea99459 жыл бұрын
mtmwood Thank you...it's a big problem with the delivery to my country. Anyway, thanks and You did a great job. Keep!
@vitornevesribeiro42889 жыл бұрын
Awesome work. May I ask you how long are the clamps you use?
@mtmwood9 жыл бұрын
Vitor Neves Ribeiro They have different length: 500, 600, 750 and 1000 mm.
@vitornevesribeiro42889 жыл бұрын
Tks.
@Gchrisberry9 жыл бұрын
What brand table saw do you have?
@mtmwood9 жыл бұрын
+Gchrisberry SC-30, Griggio, Italy
@tooljunkie5559 жыл бұрын
U make beautiful pieces and know ALOT about wood Who wood"of thought theres all that to consider in making a cutting board!
@mtmwood9 жыл бұрын
Joe Walters Cutting board does not forgive mistakes.:)
@tooljunkie5559 жыл бұрын
mtmwood thats for sure..what if I have a 2"thick 8x12"piece of african mahogany. .will that make a nice cutting board if I use butcher block oil /finish on it. (4coats)
@mtmwood9 жыл бұрын
It will crack. It is better cut it and then glue again.
@tooljunkie5559 жыл бұрын
so your saying to cut into say four 2" pieces and glue them together? also should i use biscuits?
@tooljunkie5559 жыл бұрын
and thank u very much for that info ..i would have been upset in the near future. my wife uses cutting board everyday like 2-3 xs a day.. so its going to get a lot of use.. the mahogany was given to me fro a friend..thats why i am using it..maybe i should mix some oak in with it?
@javierguerrero61809 жыл бұрын
what is the name of the equipment at 8:23
@Erasor848 жыл бұрын
+Javier Guerrero That's a jointer.
@Oshyrath9 жыл бұрын
Well, there you have it: A lesson on wood.
@mtmwood9 жыл бұрын
Thanks for watching!
@AhadZahid39 жыл бұрын
You forgot wear a glove on the right hand, during the clamps part :(
@mtmwood9 жыл бұрын
Sorry.:)
@sparkman19659 жыл бұрын
This is correct you are seen in all of your videos with a glove on your right hand
@mtmwood9 жыл бұрын
This video was made a year ago. Maybe I got older.:)