Thank you for featuring my cable clips, Michael! I was perplexed by yesterday’s download numbers and just saw a comment from the user goTVm over at Printables, who mentioned you'd posted this video. Let me point out that not only KLAMMA, but KLIPPT as well is “tape-compatible” with the other base plate (At least in light-duty applications.) This makes once printed clips even more versatile because you can interchange them easily.
@WidgetsInc11 ай бұрын
Same here! I was wondering why there was a spike in views and downloads. Thanks for featuring the Diffusion Panels. That timelapse looked amazing! These were modeled so that the deepest point on the front would touch the back panel in vase mode, making it more rigid and stay flat, assuming a .4mm nozzle and .3mm layer height. I am curious what slicer settings could be tweaked to make that happen on his and other printers.
@BladeScraper11 ай бұрын
The Gravity Broom Holder is my favorite by far, very clever
@jemoeder409611 ай бұрын
hi back, im dad
@knightmare144211 ай бұрын
damn too slow
@alexanderpinney11 ай бұрын
Hi dad, I'm dad... Wait.
@rallywagon26111 ай бұрын
Once you're a dad, it never gets old.
@ShotGunner560911 ай бұрын
Got em!
@johnnyv902411 ай бұрын
🏆
@scottlong936111 ай бұрын
Those GOATs are the fourth-most-popular folk duo in Australia
@TeachingTech11 ай бұрын
I'm trying to convince my family to get a third one to manage the other two. Maybe call it Murray.
@dan-nutu11 ай бұрын
@@TeachingTech Have you considered printing a fake broom? 😄 Or just make one with leftover filament? Would they eat it?
@Amethyst_KB11 ай бұрын
Wow, that broom holder surprised me. And the trunk velcro was a great idea too.
@ausfoodgarden11 ай бұрын
That gravity broom holder looks way better than the commercial one I bought and don't use because the brooms etc. always slide down over time. I'll be printing a couple of those for sure.
@suivzmoi11 ай бұрын
i can confirm the broom holders are great. the design is very creep resistant (the biggest problem with load bearing 3d prints) and the 10 or so that i have printed are still working after more than a year. they also work just fine when all parts are printed at 80% scale. i use rubber bands for grip and dont mind having to replace them every few months or so when they inevitably degrade and crumble.
@RomanoPRODUCTION11 ай бұрын
He is back and he is still adorable. Bro Hugs.
@paulpolley483711 ай бұрын
Always appreciated! good recommendations as usual! I love the head-rest clips and the velcro trunk brackets work fantastic!
@MCsCreations11 ай бұрын
Awesome! Thank you, Michael! 😊 Stay safe there with your family! 🖖😊
@JenSalik_11 ай бұрын
Another great video which presents solutions for everyday nuisances or ideas for doing something better.
@steveman198211 ай бұрын
I need to print some of those broom holders, such a jungle of tools in the shed :)
@maxthorax13II8 ай бұрын
Didn’t think I would print anything, but that car hook was something I didn’t realize I needed!
@1techshorts23411 ай бұрын
I am 100% using most of these prints!!! Had you not made this video I would have never found some of these. Thank you so much!!!
@BelleDoesStuff11 ай бұрын
I just wanted to say I noticed you have a PS Vita and that makes me happy
@ZomBmusicHQ11 ай бұрын
FYI, I am 99% sure that the sound panels won't help at all regarding sound diffusion or absorption. The only thing I would find use for them are for aesthetic use. Plastic isn't a good material for any acoustic purpose. Btw I am a sound engineer so my comment is really to help you out so you don't waste filament and time with these "sound panels" 😅
@jpeero11 ай бұрын
I heard you could recycle with cartons as a sound proof material
@ZomBmusicHQ11 ай бұрын
@@jpeero For sound absorption, you want the sound to travel into the material and then get trapped within it until it looses all of it's energy. So carton isn't a good material in terms of sound absorption. Solid materials only reflect the sound and although carton is somewhat porous, it's mostly solid. If you want to recycle materials, think of anything that's thick and porous, like foam. A mattress does more than any amount of carton you can think of haha. Also, thick rugs or heavy curtains help in terms of sound absorption as well. A good and cheap material for sound treatment is Rockwool, look up "DIY sound absorption panels using Rockwool" and you can see how cheap they are to make. That's my go to budget and effective suggestion.
@coreyward11 ай бұрын
Yeah the author of the model notes it is for "sound diffusion", but I wasn't quite sure what the perceptual impact of that would be so despite it looking cool I didn't bother printing them.
@ZomBmusicHQ11 ай бұрын
@@coreyward sound diffusion is another application within acoustic treatment, and even tho it "looks" like it was designed for that purpose, I'm here to let you all know that the little sound diffusion it would actually achieve wouldn't really matter enough for you to spend the time and money to print them. You would need to print them solid (not in vase mode like it's suggested) and even then I doubt it would do a good job at diffusing. They're pretty, but if you are looking to get any practical acoustic use out of them, you're better off making other DIY diffusers.
@coreyward11 ай бұрын
@@ZomBmusicHQ Appreciate the confirmation!
@philcaruso177811 ай бұрын
I've always loved watching your videos. Now that you gave my Universal Key Cover a nice review, I love them even more! Thanks!
@OldCurmudgeon3DP11 ай бұрын
Over extruding in vase mode might help the waviness. I've had good results up to 2x the nozzle diameter as wall thickness.
@scottyadamz11 ай бұрын
Got to love 3d printing for custom storage solutions!
@StacieDude11 ай бұрын
I will be printing the angled business card holder and the velcro trunk organizers. Thanks for another helpful video. Joel, Texas.
@carnsoaks111 ай бұрын
That broom handle holder, a thousand year Idea repurposed for today, is a simple design that will open many lay peoples eyes to the potential of threed. Finally. Perfect garage shop front sales item.
@riesmmm11 ай бұрын
Those velcro trunk holders are genius!
@EXG2111 ай бұрын
Gotta like that I saw this right before the US Grand Prix F1 Practice 1. Ha ha. Nice treat before the meal.
@Stocktonfilms11 ай бұрын
Some good ones here! On point as always. Thanks again!
@stuartc63032 ай бұрын
Brett and Jermaine. Love it.
@JacobShepherdEngineer11 ай бұрын
I could definitely use the cable clips and trunk organizer. Might try replacing my broom holder with this one too.
@kellyjean498111 ай бұрын
I’m always impressed by the simple things we can print to help organize. I need to print the drain snake and the trunk Velcro holders
@beermanuk11 ай бұрын
I always watch your videos and noticed your love for Danny Ric, you've had Red bull, Renault, McLaren and now Alpha Tauri merch. Hopefully it'll be Red Bull again next season.
@osvaldo5611 ай бұрын
Very useful! Thanks
@rickybobbyracing91069 ай бұрын
Actually useful prints! Too many videos out there with retreds of non-sense dollar store junk, but this is another one of your videos with good info!
@3dman87511 ай бұрын
I really like all of your videos thank you for making them
@cursedvoid11 ай бұрын
I love the business card holder but i've already set up gridfinity for most of my organizational needs
@EternityForest11 ай бұрын
Yeah, I put Gridfinity on almost everything other than decorative items. I don't really use baseplates though, I like making large trays that can stack, but are big enough to stand alone, and stackable filament hinge boxes
@lcalbero9 ай бұрын
Congrats for another great video with many really usable items to help us daily. Cheers !
@jorgeacosta11985 ай бұрын
exelente video muy explicativo y cosas muy utiles gracias por compartir exito y salud
@juunnl990511 ай бұрын
Casually having 6k prusameters in his account lol
@dan-nutu11 ай бұрын
Timestamp?
@juunnl990510 ай бұрын
@@dan-nutu0:54
@MegaAfiss11 ай бұрын
The best is the last one!
@jorgeacosta11985 ай бұрын
me encanto el porta escobas muy ingenioso
@lwo773611 ай бұрын
Those clips look great!
@Basn11 ай бұрын
i got the broom holder already, its awsome
@OddJobEntertainment11 ай бұрын
I'd be highly skeptical of the hollow sound panels. They look cool, but being hollow, there's a huge range of frequencies that they really can't touch.
@IrocZIV11 ай бұрын
I think most of those panels are only good for sound reflection in the room anyway, so maybe it could do as good of a job in that regard.
@Hanzi2u11 ай бұрын
Yes it actually just shit tbh
@Argosh11 ай бұрын
@@IrocZIVyou can't exactly place those willy-nilly...
@HayesHaugen11 ай бұрын
Thinking about drilling a hole and adding sand - but you are right and they are really more for looks.
@SolarpunkSeed9 ай бұрын
thank you! just printed out a drain cleaner as second print (after a Benchy) on new Bambu X1C :)
@forestbrother777211 ай бұрын
3D printed organs for your life! Hurrah! (misread title at a glance)
@steveriley991110 ай бұрын
Some great ideas, Thank you
@kronamadness71199 ай бұрын
Actually searching for usefull design that make my life easier since I have a brand new creality K1, and this video is just Perfect I love all the idea pretty ingenious! 🤩
@tom-8407 ай бұрын
Thumbs up for the AlphaTauri shirt!
@TeachingTech7 ай бұрын
Had to get one before they changed their name and because Danny Ric was there.
@krip77krip9 ай бұрын
1992 called and wanted their business cards back 😂
@Etrehumain12311 ай бұрын
Ahahahah perfect timing, I was about to start listing all the things I need to queue in my printer
@ElliotDelgado11 ай бұрын
This is awesome! thanks for the video!
@williampruitt54910 ай бұрын
Are the goats named Bret and Jemaine like from Flight of the Conchords? lmaooo
@TeachingTech10 ай бұрын
Correct :)
@mattriding55888 ай бұрын
I sense a remix here. Combine the Trunk velcro holders with your video on 3D printed Velco.
@eskanderx102711 ай бұрын
He's back, baby! 🤘🏼
@porterfielddynamics10 ай бұрын
Your goats are a reference to flight of the concords right? Amazing show.
@HayesHaugen11 ай бұрын
The goats had that broom down by the end of the day 😀
@MrFerrariF36011 ай бұрын
Reppin the DR! Love it!
@rbid11 ай бұрын
many thanks. have these enelope batterirs and charger😃 Greetings from the Galilee
@cache4pat11 ай бұрын
Awesome
@zecuse11 ай бұрын
3:09 While the reflection looks good, making the surface fuzzy (in Cura, fuzzy skin) would probably make it more effective. This will mimic the porous aspect of foam panels. You'll also want to print it with a couple of walls to make absorption better and stability for the fuzz.
@Sembazuru8 ай бұрын
I've never used fuzzy skin on vase mode. What do you know. I just fired up PSv2.7.1, loaded a built-in cylinder, turned on vase mode and then fuzzy skin. It sliced w/o problem. How well does it print, I wonder.
@zecuse8 ай бұрын
@@Sembazuru I haven't ever used fuzzy skin and only used vase mode once for flow tuning (from Teaching Tech's calibration video and website). I suspect a fuzzy vase will be really sketchy to print with all that shaking and no wall to support it.
@garylangford675511 ай бұрын
great stuff!!
@tannerpoulis31569 ай бұрын
I would have the assume the acoustic dampeners don’t actually work, since they aren’t at all porous and just add more smooth surfaces for the sound to bounce from. Maybe because they’re thin they can kind of help but they wouldn’t really work anything like actual acoustic foam or custom made acoustic treatment that you can still make for super cheap. other than that really good designs
@aL3891_11 ай бұрын
Having kids means i always need clothes pins, definitely checking that one out
@gexas3811 ай бұрын
the key thing and broom holders are getting spun up on the printer for sure...great tips
@davidk77477 ай бұрын
Nice t-shirt mate!
@chiefgeek202011 ай бұрын
I really like the locking cable clip and think a version of that would work awesome to keep spark plug wired nice and tidy.
@RFSdan2 ай бұрын
Go Yiki Tsunoda!!!!
@bnut157611 ай бұрын
4:40 Bro you need to spend some of those prusameter points! 😂 loved the video! I have several friends who would be interested in the business card holders so I will be printing some of those for sure!
@jasonjulian111 ай бұрын
Those clothes pins would be good chip bag clips too.
@wilkuuu401611 ай бұрын
3 minute - It's not a sound absorbiing panel, its only diffusion panel and because of thin walls works really poorly. But looks cool.
@AlyssaNguyen11 ай бұрын
5:20 Aren't you a little short for a Stormtrooper?
@WeekdayWeekend11 ай бұрын
These could all organize my house but I'm not sure about my life. I don't think any of these prints cure crippling depression or loneliness.
@TS_Mind_Swept7 ай бұрын
11:32 I've watched so many detailing videos I was expecting a vacuum to pop out there..
@gsheppard870710 ай бұрын
This is a great video, but I do feel it's worth pointing out those acoustic panels must be printed in something non-flammable like PETG. PLA is highly flammable and flammable acoustic panels have been cited in so many fires as being a significant cause of the severity (The station nightclub fire is a significant, and very tragic, example). Usually it's flammable acoustic foam, but the same would apply here if you don't use the right material.
@CDRaff11 ай бұрын
I honestly think the loose corners look better on the tensegrity card holder. When you first see the illusion it's easy to think that the strings are "fake" in some way; like they are stiff. With them loose it makes it fairly obvious that there isn't fakery involved.
@rlimagon3 ай бұрын
Since you are obviously a F1 fan (like myself) why not make a video about cool F1 themed 3d prints? Cheers from São Paulo!
@NicksStuff9 ай бұрын
Do you feel your life is better organized with sound panels? ;-)
@TeachingTech9 ай бұрын
Yes.
@LutherBuilds8 ай бұрын
I wonder how much weight those broom handle hooks can hold. I'm thinking of shovels and rakes in rhe garage.
@Boodster6111 ай бұрын
I can't wait to get my first printer! Need to find another job before I can buy one 😢
@dan-nutu11 ай бұрын
Just be careful that it will become the gift that keeps on "giving"... errr, taking. It's not just the initial cost for the printer itself, you'll also need rolls of filament in different materials (and possibly also colours) at around $20-25 a piece, filament drier, many upgrades (if you're buying a cheaper printer to begin with), maybe also carbon filters, an SBC for Octoprint or Klipper, maybe also a web cam for it, etc etc etc.
@brianparker522811 ай бұрын
I would say that the cable organiser where the cable wraps around then is covered is a fire risk the coil will act as a transformer winding and could melt etc
@glowpipe11 ай бұрын
Don't know if it will be a risk here. Think the cable is too short and loosely coiled. But my last workplace, they used an old welding thread roll to roll the extension cord around. One day one of the workers was making waffles and didn't unwind the cables and they melted and shorted.
@ninmarioscc10 ай бұрын
You look like Alpines Ocon 😊
@thorus52811 ай бұрын
great stuff as usual. Im sure you have plenty of 3D printed accessories and upgrades for sim racing rigs. Could you please make a special for your fellow enthusiasts?
@kiplinght11 ай бұрын
Missed opportunity to "test" those Velcro corners around a track day
@Ac.MillitaryPrepper10 ай бұрын
You should tell yourself and friends to make a parabolic plastic bowl shape device for painting with zink for wifi band dish reflection and maybe make a mesh dish backing with like speaker wire and copper wire so you can make your own wifi reciever sender for a laptop wlan card adapter for high priority use at like 760 characters per second for long distance simple internet use
@RookieRay10 ай бұрын
Let’s have a multicolour projects vid
@Doile9113 ай бұрын
7:18 Remember! Do NOT, i repeat DO NOT put any iron/steel to the middle of the cable spool. You WILL create an electromagnet.
@terencerenshaw9111 ай бұрын
Should have put a USB thumbdrive/SD/Micro SD organizer. They help out!
@dan-nutu11 ай бұрын
Have you found any good microsd organiser? I'd love one that packs ar least 15-20 cards, allows for some form of label/id for each card, and it is small enough to throw in your laptop bag
@kayhweeeeeee8 ай бұрын
What printer is that?! I’m a sucker for clear technology and I gotta know.
@cozmosland9 ай бұрын
do you find the sound panels to help or is it more for decoration?
@nuns1993125 ай бұрын
gridfinity by voidstar labs
@crowguy50611 ай бұрын
Obviously that velcro part should have printed velcro as part of the design.
@Condamine12345611 ай бұрын
I want another video 🤣
@darian.rosebrook10 ай бұрын
now my cargo does not go when the car goes. Thanks!
@bajcsyzoltan7410 ай бұрын
7:31 looks little dangerous if the cable get hotter..Not too good idea spool the cables i think..
@funkysod9 ай бұрын
But no links to the other videos in the description?
@TeachingTech9 ай бұрын
The links have been there the whole time.
@TheAMavk11 ай бұрын
I printed all of these, but still my ex won't get back together :(
@DonsArtnGames11 ай бұрын
The organizer at 7:06 seems like a good idea, but won't the coil create an electromagnet? That could be an issue with anything magnetically sensitive and possibly vampire out some electricity to keep the EM field energized.
@kimmotoivanen11 ай бұрын
No, because when current flows in both directions, magnetic fields cancel each other (in very close range not completely, but in practice well enough). If you separate L and N (or + and -) and coil them in _different_ directions, that would be quite different (better not do that though 🌩) 😉
@Carlos-eo3iu11 ай бұрын
The sound panels are awesome. I’ll def be making some to experiment in locations behind the tv for optimal sound.
@bradley985611 ай бұрын
just use a curtain offset a couple cm from the wall, way better than printing a load of junk
@ZomBmusicHQ11 ай бұрын
FYI, I am 99% sure that the sound panels won't help at all regarding sound diffusion or absorption. The only thing I would recommend them for is for aesthetic use. Plastic isn't a good material for any acoustic purpose. Btw I am a sound engineer so my comment is really to help you out so you don't waste filament and time with these "sound panels" 😅
@bradley985611 ай бұрын
@@ZomBmusicHQ just what I thought, but would a curtian of some sort suspended from the wall that sits a couple cm away from said wall help at all?
@ZomBmusicHQ11 ай бұрын
@@bradley9856 For sound absorption, you want the sound to travel into the material and then get trapped within it until it looses all of it's energy. So yeah, curtains work better than not having anything at all. The heavier the curtain, the better it will perform. Solid materials only reflect the sound, so the curtain has to be made out of porous material (as in, more fabric, less plastic) A good and cheap material for sound treatment is Rockwool, look up "DIY sound absorption panels using Rockwool" and you can see how cheap they are to make. That's my go to budget and effective suggestion.
@monkeydadonkey64969 ай бұрын
Nice Shirt Bro😅
@leapnlarry11 ай бұрын
Love this video but a channel with your subs should have awesome audio, use a lav or a better shotgun, the echo is annoying. JMO. Larry
@rossmarzano11 ай бұрын
Great video as always. What's the best platform to share files on? I tried thingiverse a while ago with no success, I want to share some designs like a bag hook with print in place chain amongst other things
@Old00Farth11 ай бұрын
I really like your broom holder, but I think it should be developed a bit so that the orange spindle doesn't fall out - one option is to create some sort of track behind the spindle... but a smart idea.