The Best Brushless Whoop! - Eachine UK65 US65

[@AndyRCchannel]

The Best Brushless Tiny Whoop For the money: bit.ly/2p4cc5G

[@firstpersonq2346]

Agreed, best whoop I got so far Had it for a few days.The battery cage is a little bit to loose fitting tho.Put a slice o foam and it works just fine.i think it might be on purpose to accommodate puffy's.only real complaint is the brittle frame, crashed on cement and broke in a few places, thanks to Nick burn's welders glue suggestion.beta75x outside and uk65 inside.(really wanted that sweet sweet American flag aesthetic.Merica!)

[@dronereviewman9580]

I agree!!!

[@firstpersonq2346]

@@dronereviewman9580 is that you Dave?😉

[@emotionalbeats7178]

Where to get batteries and charger?

[@firstpersonq2346]

@@emotionalbeats7178 I would recommend the UK/US65mm, I believe it still comes with a charger and three batteries. Go to Goodwill and get a 12v power supply for their charger. I would also recommend the crazypony 2pcs CX405 1s lipo USB charger. 8 ports, high voltage, 10$ on Amazon, smart enough to be safe. they do burn out eventually though. Also get a 6 pack of GNB 260mah HV 4.35v 30/60c batteries. You'll never stop flying 😎

[@DroneOn]

I have to weight in. I'm a hardcore whooper and over time I have found an awesome formula. My brushed fly just as good but... The price, rssi, smart audio, osd, d-shot, 21 grams... Oh my gosh.... Again the price... I hate to say it but...you can't go wrong. Great flying.

[@AndyRCchannel]

I was the same. hard to hate

[@firstpersonq2346]

Embrace the brushless.Good, Good.

[@mshane86]

I like outrunner motors just so they don't get stopped by a stray hair. Brushed motors didn't work with my golden retriever...

[@espenlauvrak8835]

Try two girls and a junior hippie....

[@ArduinoKing]

Cheers Andy! Been thinking about ditching my brushed whoop for a brushless one. And this one made me do it.

[@Temporal_Flux]

Got mine today. I totally agree with you, it is an excellent brushless whoop. On mine, I didn't have to send the RSSI back from the transmitter over an aux channel. The RSSI is sent to the OSD over SPI. You just have to make sure that no RSSI aux channel is set in the Receiver tab.

[@batmojuice5704]

Thank you so much for the setup help. It seems like a lot of the Betaflight changes you recommended are now standard on this whoop, but some are still not . I struggled with mine for a day with the control setup on my Jumper, but it eventually let me win. Your setup made it even better and I learned a lot about what the settings do. Keep up the great work. Cheers from Texas.

[@typeOhh]

Dude we should totally hang out sometime. Could play some music together, have a drink etc and then afterwards we go out and get really high in that park with the drones.

[@Taematoe]

Just got mine today. Charging the batteries now off my 3s tattu. Followed your betaflight setup and all went well but I did notice in mine it says 6v battery not 4v. Couldn't change it. Thanks again Andy.

[@d3c0deFPV]

I've had the UR65 for a few months now and I love it. It's a cut above any brushed whoops I've built, and turtle mode is amazing. The only modification I recommend is replacing the props with Eachine E010 ones, which seem to be much less noisy and perform a little better. I even tried another set of the UR65 props and they still rattled, but the Eachines are great!

[@mattkins99]

Already feels like Tiny Whoop season here in Seattle. I have the US65 and the BetaFPV 75x both on the way and can hardly wait!

[@BigAlFPV17]

I'm definitely going to pick one up. Quadcopter 101 did a review on this as well but did not change any settings in Betaflight as far as the battery voltage goes. Excellent review Andy!!

[@GLXYFPV]

fly the whoop. embrace the whoop. become the whoop. Great review as usual! thinking of getting one as a decent indoor and outdoor whoop. is this a good choice for angle and acro indoor and outdoor? I would presume it is from the flight footage!! happy flying!!

[@scottmarshall6766]

EDIT _ Mine finally turned up today (10-15-18) and it came with instructions (better than average), 3 and 4 bladed props, and 3 batteries. Still setting up, but it looks great. Thanks Andy! Wow - a real Quad you can fly indoors. It does all the things I could never get about a dozen whoops to do! You're right Andy, the only downer I see here is the paint job. I love USA, and have a soft spot in my heart for you Brits, but damn, they butchered both flags. Neither does the country's real thing justice. I guess we're just going to have a painting party with the air brush some afternoon. It sure doesn't look like the guts will go in a Whoop frame, especially the motors. Thanks for the heads up on the whoop and how about a rundown on your fine looking collection of music making equipment some day? The recent music video and the whoop flyby are just a tease.

[@TinusFPV]

Scott Marshall they sell generic frames all over the place, look for betafpv 65 Pro. Any canopy from them will fit as well.

[@scottmarshall6766]

TinuZ - Thanks! I found one here: betafpv.com/products/beta65-pro-micro-brushless-whoop-frame Better price here: www.ebay.com/itm/65mm-Bwhoop65-Frame-RC-Quadcopter-For-Indoor-FPV-Racer-Brushless-Whoop-Rack/273354707766?hash=item3fa535d336:m:ms71-8lr9h5sSrCAqkFhneQ I've kind of been out of the Whoop game all summer, I didn't know the state of the art had progressed so far. It looks like the brushless version is now commonplace. I guess I shouldn't be surprised,

[@renotimberwolf2139]

Just bought the US version, extra frame and batteries. Thanks for your reviews!

[@TheScottsawesomeart]

thanks andy...i am getting my usa version around 19th , i didnt know you had to set suff up in bataflight , thanks for the heads up!!

[@xnavigator1]

ive never flown a whoop,would love to see the look on a plastic cozza,s face tho, me ripping that in front of them with the union jack on it lol... nice video andy. love the flying round the house.

[@eduardopin4145]

Hi Andy, awesome work. I wish you the best. Almost one year after the UK65 review, what is your current favorite whoop? Also, your flight is so smooth and you hoover. Do you fly in acro mode when indoors? Best wishes.

[@theflyingfish7338]

I have the original UR65 version of this and I don't feel like I'm missing out tbh. I think the Union flag hydro dipping on this looks sloppy and the extra KV doesn't make enough difference, but smart audio would have been nice, but no real biggy. I have mine running Mockingbird v3 tune and it's flying great.

[@tubechris]

I love my UR65. I could have sworn that it had SmartAudio. How do you tell for certain whether it has it or not?

[@theflyingfish7338]

It doesn't have it unfortunately, but if it did you could check by controlling the camera settings through the BF OSD menu with your TX, like you can with the FC settings (assuming it was wired up).

[@Gosuminer]

I had an Eachine QX65 but it had too little power. Then I jumped on the 2S-Whoop hypetrain but the Mobula7 hat too much power and weight for indoors flying. I think the UK65 is still the indoor Whoop with the best value, even one year after its release.

[@nolsmtm]

What's wrong with the union jack scheme? I think it looks banging!

[@kimfromnewyork]

i just got one of each delivered yesterday, both mine came with instructions, really like them, great value for money! should keep me entertained now the British summer is well and truly over!!!!!!!!! great review, thx for the tips setting up, and i will experiment with the battery power, as my first tests at 4.35 seem to have a short flight time, and it just drops to the ground when the battery is exhausted. much fun though, my first whoop!

[@AndyRCchannel]

be careful when charging the batteries. any empty slot will show 4.35. pay attention to the channels :)

[@miketech2]

Happy to report I received a nice, single sheet of instructions in full color.

[@flipfpv4539]

Hi Andy I know how much you loved the eachine UK 65 ... I’m on my second, lost one in a tree, anyway did you notice a lot of battery lag from the beginning and short flight time even with a new battery ..love your channel 👍

[@greedysamson7200]

Wa'gwan Andy great videos by the way this my first time commenting on your videos (long overdue I know) matter of fact its one of your videos that made me order the uk65, I have some 1s 300mah batteries would they be suitable to use on the uk65 or would that fry the flight controller sorry if this is an obvious question but I'm a noob lol, thanks in advance

[@victorsadauskas2121]

As always great review, I am glad you went into more detail on setting it up. I ordered one about a week ago, got 2 more wk. wait, thanks for the review

[@Dav2112]

Would you still say this is the best brushless Whoop for indoor flying, Andy? I don’t think I’d be able to fly any of the 2s ones that’s available now, this one seems like a decent deal, just wanted to see if you still feel the same way about it first. Cheers

[@Heiple2007]

We are heading toward fall/winter here in Michigan, USA and whoops will be the thing for a few months, perfect for this model. May have to have a new plaything, thanks ANdy great review. Andy, I want to say that I feel you demonstrating the sequence to set up that rssi is fantastic. So helpful for folks, some may think it is "too baic", but think back when YOU did not know and how freaking frustrating that lack of knowledge made you feel. Great job Andy. Jeff (LIKE the model for sure!!!)

[@AndyRCchannel]

Thanks a lot Jeff means a lot

[@MontisTube]

Great review as always. Thanks for walking through the settings. Was interesting! Will be flying this whoop at winter time for sure!

[@bakkiepleur_FPV]

Back in the day i only had brushed motors.. I should give this a try

[@AndyRCchannel]

definitely its come a long way

[@firstpersonq2346]

You shan't be dissapointed.

[@dogswhistlesharam9029]

Have you tried the snapper 6? It’s actually slightly lighter with full carbon fibre and aluminium frame, no heavy plastic in the frame and prop guards and fully brushless with the same motors.

[@AndyRCchannel]

does it have telem and smart audio?

[@dogswhistlesharam9029]

AndyRC it definitely has full telemetry but might not have smart audio, but for me saving weight is a better trade off than having smart audio

[@AndyRCchannel]

I hear they are good. I was never sent one. But This ones gonna be hard to beat

[@firstpersonq2346]

If the 7 is any indication I tend to agree.maluble aluminum and all.beta 65 pro frame I got on the way to replace might just be the ticket tho.

[@rl2109]

Nice review, and nice flying, too...! Makes me want one! Thanks for another fine review and demonstration! ;)

[@stu22uk]

Hi Andy, your review convinced me and I've been setting mine up tonight. A quick update on my experience - I had to use D8 mode on the taranis to bind as it has European firmware, D16 does not work - no biggy.... Except, there seems to be a limitation with D8 and LUA Scripts which is non resolvable, at least thats what my research has revealed. I heard you say in your vid that you had 16 channels set up, I assume you are running non LBT on your Taranis? Otherwise, how the heck did you get LUA Scripts working????

[@robfs9640]

Great review. I have one and using it with a Jumper T12 Pro and Eachine VR007 Pro googles. You fly it so smoothly around the house, going under the table, etc, without hitting anything. How am i not able to do that! Are you using default rates/settings on the BF and the TX? Do i just need to keep practicing? (i did reduce rates in BF and put onto a switch on my TX, but still i'm not smoothly flying through things indoors or outdoors).

[@robfs9640]

Now i can fly i much better....I upgraded the 'stock' motors 0603 19000KV to Happymodel SE0802 19000KV (same as Mobula6 i believe). I did setup a new lower rates on a switch for finer control. I'm not sure if i damaged the original motor/s but it easier to control now. I can go through tiny gaps.....but not consistently but that's me...i'm still in training.... I tried it on 450mAH lipo on 0603 motors as well check my youtube.

[@potjnkye86]

I love mine but the betafpv 65x and 75x are the best. I have the betafpv 65 pro with the f4 board with OSD,receiver and smart audio as well as being brushless and it flies much better than the ur,us,uk 65 although I still love it.

[@hsinyen6942]

Dear Andy, just received Eachine US65, really like it .. bind with Taranis and setup Betaflight ... but one motor doesn't spin ... when I change angle mode, it will spin a little bit then stop ... now just stop ... please advice. thanks.

[@Harel-DIY]

Hi Andy, love your videos, I'm looking to get in this hobby for quite a long time buy I never had the time and money to do it. Now that I Do, would you recommend this for a first for drone or you say go for a brushed model first? Also do you think that the ev800 are decent enough or should I go higher?

[@AndyRCchannel]

this is the one to go for and yes the ev800d cheers

[@Harel-DIY]

@@AndyRCchannel thank you very much, really appreciate the quick reply.

[@JonnyDKUK]

Nice one Andy - picked one up on special a week or so ago, had a-lot of fun with the QX65 last winter - this looks like a worthy upgrade now winters starting to draw in! I put the Project Mocking Bird settings on my QX65 and it transformed how it flew - from not bad to awesome! Just wondering if you were aware of any revision of these settings for a brushless setup like this? Would make a good video if that interests you 👍

[@AndyRCchannel]

I am aware yeah. the problem is I get a lot of complaints when I dont review them as stock as possible ( i guess it could hide initial problems). people wanna see what they are like out of the box. but Its a good shout. cheers

[@humblemumble1]

Hey @AndyRC not sure if you'll see this. I'm just looking for a CLI dump on this to return it back to stock, hoping you or AndyRC community would have it? Thanks!

[@werewolvesfpv5002]

Sold, I'm buying one! Nice review Andy. Nice to see the axes too! ❤

[@MookMan]

Just got the URUAV65 but I agree I don't like the flags theme on this. Could you just upgrade the motors to match these specs? The '65 i have had the bobble you spoke about as well, changing from Dshot 600 to 300 fixed this for me.

[@igeekw2u]

Is it still the best? I love mine! But how it compares with the new Mobula 6? You could make a comparison and review of these two!

[@robfs9640]

I just upgraded the motors in mine to the Mobula 6 ones....

[@karldunn1464]

Received mine, US65 a couple of days ago, and i love it. Looks great, flies great, lots of fun with flips and rolls. Plenty of power for a 1s quad in my opinion. Lots of features. Only thing is, what the heck are those rubber bands for? Btw, mine did come with a pretty nice manuel, it was on top when i opened the box, but maybe they put yours under the insert, just a thought. Thanks for the great detailed video Andy, good as always. Cheers

[@batmojuice5704]

Maybe they are to hold a big 4S battery. Just kidding, don't do that. I was told that people complained about the battery sliding out, and this was the remedy. I saw a better remedy of just putting a small amount of scotch tape on the battery to make it fit more snug.

[@trevorc6793]

Hi Andy - 2 daft questions. My UK65 seems to loose signal really easy - within 10 metres - any logical causes? (I have the frsky_x f-c using an x-lite). I was also wondering if it's worth upgrading the firmware as I'm currently on v4.00. I recall reading something in the little manual about going to a site to upgrade? OR am I OK to use betaflight, select the latest crazybeef3fr version and go down that route? TIA

[@KelDG3]

Is it ok running these batteries down to 2.8 in flight? I get that the voltage goes back up a bit once landed, but I just got one and don't want to end up with dead batteries within the week. Thanks!

[@dronereviewman9580]

Haha i just watched Nicks review of this same one!!! Well the flag was different lol!! But i like this more then my Qx90cpro!!! Great review and flight footage i want one!!!!

[@andyspoo2]

Will it handle a larger capacity battery, or would the weight make it unusable? Would be better if you could increase the fly time.

[@AndyRCchannel]

I'd stick to 250mah myself

[@valentinguz]

I love ur videos, I was wondering TINY 6X vs TINY 7X vs TINY 8X vs QX65 vs E010S Pro vs UK65 vs URUAV UR65 which is the best?!?

[@AndyRCchannel]

UK 65 for me cheers

[@villadseskesen]

Uk.

[@psdisme]

Andy, Can you please add a link for the charger in this video? Thanks!

[@soupos1866]

I was just wondering about these!! I need the USA one haha this is the best looking whoop I've seen

[@bennieleip579]

But I wouldn't have to do al the stuff for rssi right? Because the vid wil go out first ? And does failsave work accectly the same as a 5inch ? Nice review do 👍🏻

[@AndyRCchannel]

I'm told the rssi just works anyways. Yes failsafe works

[@bennieleip579]

AndyRC thanks for answering 👍🏻

[@alvinlau4572]

Question on the FrSky receiver. Which receiver is it? Can I / How to change the firmware of the receiver to support FrSky LBT EU Firmware? Banggood says "FrSky LBT EU Firmware D16 Transmitter can not compatible with FrSky version drone. You can change your transmitter to LBT EU Firmware D8 version or International version." (Thanks Andy, i also watched you videos on " Flash XM Receivers Without Solder"

[@joshuacurtiss]

Andy, prefer it over the Snapper 7? What do you think? Or the UR65 for that matter?

[@AndyRCchannel]

I prefer as it's smaller yes

[@joshuacurtiss]

Thanks dude for your opinion. They're all on sale right now so I'm bouncing between one of these to buy.

[@ohmyqwad8705]

Love your channel Andy ! Sorry for the gripe but I’ve been waiting on shipping for a month on one of these, now Banggood says another 3/4 weeks.. but of course they sent and charged me for extra batteries I can’t use. Now not only do I not have a Christmas present for my son, my money is tied up in some Chinese account. Do yourself a favor and don’t waste your time with Banggood

[@ryanmaynard256]

Andy the new beta flight will not support F3 anymore will that be an issue

[@Billbobaker]

I think this is going on my Christmas wish list.

[@Sandokans]

Andy, i have flysky i6x radio. The procedure is identical, like do you shown in this video, or is different?!what change?

[@thurgogopro5338]

When connecting a quad to beta flight do you have to have the quad powered or not. It's something that all the videos on beta flight that I've watched seem to skip over because everyone assumes that we would know.

[@AndyRCchannel]

No you don't have to have it powered

[@labkitty1197]

@andyrc Does the controller that comes with the uk65 drone work in the eu or does it need flashing?

[@bobdigby1]

@AndyRC I bought the UK65 and am loving it but I'm struggling to find batteries that would be delivered to the UK, does anyone know where to get them from? Cheers

[@doktordrone]

thanks Andy :)

[@mituvo79]

I have the eu lbt Taranis, can this be bound? Great review!

[@ontheflyby270]

I was excited about getting one of these... Then I noted there is no Spektrum support!

[@archer4922]

Great review. I’m going to be adding one to my collection soon. But, the title needs to say “beat brushless 1s micro” the betafpv 65x and 75x are prolly the best out there right now lol but their 2s.

[@Raythetree001]

I've bought this with a spectrum dx6i and it won't bind..I think the guy was lying when he said it worked.. what can I do can it work together or can I get a new FC for spectrum or do you have any ideas

[@jonnyboys3949]

Hi Andy, have you modified the canopy mount at all? Because mine is unflyable fpv. as soon as the motors start spinning there is so much vibration in the camera you cannot fly it.I have tried tightening everything down but it is absolute rubbish, so much so, i have had this thing 2 weeks and haven't even used all 3 batteries

[@jonnyboys3949]

Just in case this helps anyone

[@MrEffys]

Hi andy , can you share your google setup +ant used on that specific video ?

[@flyingfrogfpv]

Btw this tiny Whoops are similar to the Uruav UR65, only with an colorfull Look. And the UR65 is available a long time ago 😋 I think this Sort of Promotion on all Channels only push this little Thing, but it's nothing NEW 😉 Anyway your Video is great as always! Thank you Andyrc for your Work 👍

[@AndyRCchannel]

its got smart audio and more powerful motors. so to me its an upgrade

[@firstpersonq2346]

Not new upgraded.higher kv motors smartaudio set up out of box.

[@flyingfrogfpv]

@@AndyRCchannel allright this is an Upgrade yess 😊 and they cost less 😍

[@flyingfrogfpv]

@@firstpersonq2346 allright more Power is always great 👍😋

[@nichill33]

just bought one of these on sale. How has this quad been since this recording?

[@misconstrudel]

Okay I've been waiting for the AndyRC stamp of approval before getting one of these. Really appreciate the review.

[@AndyRCchannel]

thanks enjoy

[@borimir]

What version of OpenTx and betaflight lua script do you use? I cannot got this script working on my taranis with us65. The problem is that I do see any numbers, no values.

[@toddspeck9415]

U speak quad so well! Really dig this review.

[@Robroy11976]

Can you charge all 1s batteries all together even if they are not on the same voltage range? As what you do on balance charging.

[@Sandokans]

Andy, you are great!! Thanks for sharing this and most inportant, how to setup în betaflight.. Cheers mate

[@ianprice9376]

Sweet Andy . Looks like fun.

[@VadersDarkside]

Gonna have to pick one of these up as I've never bothered going brushless in the past with my whoops. On a side note is one of your guitars made from a 3 phase electricity meter 😂

[@chriswhitehead6095]

Hi Andy, I can't get bf lua to display , just get Script syntax error, BF/ui.lua:340 not enough memory. Any ideas? What version of open tx are you using?

[@brownster4865]

Do you like better then the snapper7?

[@robotmad]

Where do you buy the batteries ? Banggood not shipping to the UK for some reason

[@teilmann7479]

Is it stil the Best ???

[@Nagamooto]

Great review! Lua script help in it is really useful (thanks!)

[@RCredman69]

Hey Andy. Did you bind the UK65 in the LBT EU mode? D8?

[@AndyRCchannel]

D16 only works with fcc. This is fcc

[@RCredman69]

Thnx for your replay. Maybe I don't get it. But will it bind my X12S with EU LBT software? It is indeed D16. Grtz from NL.

[@jakegarrett8109]

I want one with the canopy of Trump's face with trailing hair wrap on the canopy. I don't have a logical reason as to why, but I think it would be funny. Maybe make an obstacle course with little walls? Nothing could get through them! (side note, you can hot glue drinking straws into partial cube frames for miniature gates and put LED lighting on it for an epic low light flying indoor experience).

[@carpenterrick186]

Great little copter!!!! IS That a JEM hanging on the wall?? Cheers

[@errikpreto1281]

Would the FlySky FS-i6 be a ok TX to start out with this? Thanks.

[@thurgogopro5338]

Andy Just ordered a UK65 from BG but does the OSD work automatically or do you have to setup lua scripts, you sort of lots me there. Had the taranis flying planks since 2015 but fpv setup is something else when I've never even used BF yet. Any chance of an idiots guide video to the lua setup. Maybe I don't really need it Bob

[@AndyRCchannel]

The osd is already set up. The Lua you have to install on the taranis

[@petermarshall2189]

Be interesting in the binding on EU-LBT firmware - on the UAR-65 it will only bind if you untick "EU" when downloading OpenTX, and only in D8 mode. That gives one way telemetry, so no lua scripts, so would be interested if this newer one will bind with D16. I can bind the with an IRX4+ module, but that doesn't give full telemetry either. Thanks

[@AndyRCchannel]

only binds in d16 in FCC version. cheers

[@petermarshall2189]

That's what I thought - it's not a huge problem, you still get Telemetry on the D8, just no Lua scripts

[@AndyRCchannel]

yep thats correct. thx

[@turboed13b]

They all bind in d16 but it is bugged and hasn't been fixed yet.

[@ze2004]

Hello there. I have question regarding the motherboard. I have radiolink RC and i need sbus to conect external radio. What kind of board its this? thanks

[@anojansritharan9223]

hey can we put a action cam on these ?

[@BBooka]

Good review. Still I think you have to try Happymodel Snapper7 or smaller Happymodel Snapper6. Both are almost the same and reviewers for now very like them. Especially Snapper7 looks to have very nice flying time. And by flying capabilities looks to be the best tiny whoop for now.

[@AndyRCchannel]

they never sent that to me :(

[@BBooka]

Maybe they still will. It's quite new drone. It looks also that Gearbest and Banggood had too much orders to handle right now during some promotions. It's now over a week from when I ordered Snapper7 at Gearbest and still not have shipping status yet. The same at Banggood where week ago I ordered a plane XK DHC-2 DHC2 A600 5CH and also this one still not have shipping status yet. :-O Hmmmm. Does anyone else have such delays at shippings at those 2 companies this days? Can I ask somethin else about FuriBee X215 Pro at video of that drone? How I Review A Quadcopter - X215 is one of the most watched videos at me. :D

[@firstpersonq2346]

Not enough power to burst out of grass, stable flight characteristics, descent flight time, tough frame including ability to be bent back into shape occasionally w/out breaking, overall worth it imo.

[@andyspoo2]

The review I just read said the Snapper7 had a 3 minute flight time, so the same as this.

[@firstpersonq2346]

@@andyspoo2 uk/us65 has around 2:20_3:00 min flight time depending on the quality of your battery.

[@thomastankengine5963]

HELP! I have a Snapper7 on preorder as it was out of stock. I'm not in a rush but should I cancel that and get this instead?

[@AndyRCchannel]

They never sent me that one but it's bigger so larger gaps needed

[@BroManGuy11]

@AndyRC Hey Andy I was wondering what a powerful 5 inch outside drone would be. Roughly under 100$

[@hanger9uk]

Hi Andy, wonder if you could help, will this bind with the first jumper t8sg?

[@AndyRCchannel]

Yes it will. Thx

[@hanger9uk]

@@AndyRCchannel Thanks Andy, does it matter which version flysky or frsky?

[@banuar8867]

On this review fly uk65 what fpv google and antena use?

[@billsomrak]

Looks really nice compared to my Eachine E010S (supposedly has the raceflight brushed motors on it). You didn't mention what version of BF its running, but I'm assuming something recent, since it has all those features. Cheers!

[@AndyRCchannel]

3.4 shown at the end Bill

[@billsomrak]

I saw the landing .. missed the 3.4.0 ... getting old .. ha ha

[@billsomrak]

One other thing I forgot to ask about this. I see that the USB port is underneath, aiming downward. Not sure how you can connect to it with a std. micro usb plug, unless you stand it up on some which would keep it level for the Gyro Cal. I think at one time I saw that you had a right angle USB adapter, which might be how you were able to set this up. This is the only drawback I see on this. I could see getting the US65 version of this and pitching my QX90, QX95 & E010S. Since my X9D+ is still running the old v2.0.9 FW, I don't think I can discover new sources in order to be able to use RSSI as featured here. I think the only quad that I have RSSI on with my X9D+ is my original ZMR250 which has a D4R-II ppm RX in it. Aaacccckkkkk!

[@hazzardoutdoors]

Hi Andy, just received mine today all set up, but my rear left motor on arming sometimes spins fine. But sometimes just jitters and esc resets... any clue?

[@AndyRCchannel]

hmm iv not seen that could be a fault. these motors do have a really low start up power you can try upping or lowering that in blheli. however if you cant get it sorted best to make a video and send to banggoods customer support. they are pretty good as long as you show the problem.

[@hazzardoutdoors]

@@AndyRCchannel turned out to be a similar problem to the leader 120. Idle had to be upped even more to 8.5 or that motor didn't spin and on throttle it caused escs to reset. Like the leader and the stall and spin of death

[@EnglishTurbines]

Amazing little package...cheaper than my brushed Tiny 7....damn.

[@JonathanHeavyside]

Literally just bought a ur65 and couldn't decide to go for the uk65 or the ur65 within the last 15 minutes! If only you had faster internet I may have caught your video before!

[@AndyRCchannel]

still a good model enjoy

[@JonathanHeavyside]

There was a couple of weeks wait for shipping and seeing how I just got totally shafted on the ev200d despatch I went for the ur65 as I am impatient and want it yesterday! Didn't look too be that much difference on the videos I saw anyway

[@leogarrett5082]

@@JonathanHeavyside the ur65 is still a great model mate. Can I ask what flight times u get on the ur65? Because i just wanna know how much less battery life I would get with 19000kv motors on the uk65 vs the ur65!

[@JonathanHeavyside]

Andy what's your opinion on these brushless Vs brushed whoops. The brushless seem to have overtaken the brushed

[@leogarrett5082]

@@JonathanHeavyside I agree with that statement 100%

[@firstpersonq2346]

Oi you got a license for that whoop?

[@AndyRCchannel]

I do. and Insurance ;)

[@firstpersonq2346]

"this Mercedes has a dead battery"

[@Silor]

The age of 1S brushless whoops is over. The new BetaFPV X series will crush anything in this category

[@firstpersonq2346]

Indoor small quarters, no indoor/outdoor speeddemonery Yas!

[@rileyaok8604]

Glad I waited to upgrade!

[@omg133777]

why should the esc burn out at turtle mode? the escs can handle 6A each and you get max 5A out of the lipo?

[@AndyRCchannel]

if the props rapped around something like grass and is trying to turn when stuck. it will burn the esc up. I see It all the time.

[@omg133777]

but you can set in blheli current protection at 5A. why should them burn?