The BEST Holden SV6 Exhaust setup!

Xforce cat back - fastautoparts....
Xforce high flow cats- www.googleadse...
Vcm otr- vcmstore.com.a...

[@Beavis-Nadz]

Cheers for uploading to help us all out cobber. Thats the sound I'm after!

[@paulie3087]

best for vf lfv is 3 inch hotdog muffler delete and probably high flo cats

[@arnoldtan7563]

Oath bro that sounds mint!

[@275erz]

Sound solid bro 💯

[@AJ_VF]

Was about to buy a 3” empire performance cat back exhaust but now I’m contemplating

[@lando5680]

My mate got an exhaust from empire for his commy and he said they were pretty cheap quality, but it’s up to you bro

[@AJ_VF]

@@lando5680if this xf one sounds this good then it’s a no brainer it’s been out of stock for as long as I remember. I’ve got a 2015 wagon though so not sure if anyone else is selling them.

[@lando5680]

@@AJ_VF yeah, you might be able to maybe find a 2nd hand one on a sv6 facebook page if you’re lucky. If not you’ll probably have to wait man

[@AJ_VF]

@@lando5680 least I can buy the hf cats in the mean time 😆 did you get the exhaust before the otr or was the otr already installed? I’m assuming you got it afterwards since the otr it self requires a tune if I remember correctly? Anyways if you did have the exhaust prior did the otr change the sound at all?

[@lando5680]

@@AJ_VF yeah I got it roughly a month or 2 after the whole exhaust was put in, it was really good as it gave time for the exhaust to burn in

[@4_deeski426]

Tuffffff🔥

[@bestvideosoftheweek7591]

Not until u get an EPA warning like me, had to take the whole thing off and replace it w stock 😭

[@lando5680]

@@bestvideosoftheweek7591 had it for 2 years now and I’ve never had a problem???

[@AvaGz6]

What website ?

[@ExiaI]

VCM OTR Intake make car much more louder?

[@AusMLE888]

What’s the decibel limit on this system.

[@killerindustry3735]

So how much power and how's it comepear to stick?

[@davidly9716]

Straight pipe hotdog red is my sounds the same

[@milzie-7206]

Just uncounted a problem with bolting on the high flows that they were to small for a vf 2015

[@lando5680]

Stock headers?

[@milzie-7206]

@@lando5680 ye mate

[@trixpshorts2753]

Do you get them on

[@Snxgur]

what’s the difference between 2.25 and 2.5 bro? which is better etc

[@lando5680]

2.5 is a bit bigger and louder than the 2.25 it’s really up to personal preference, I got 2.5 for more power

[@abae.2764]

Hey mate sorry to annoy you but could you please send the link to the exhaust having a bit of trouble finding it

[@lando5680]

All good mate, www.exhaustshop.com.au/products/xforce-holden-commodore-ve-vf-sv6-sedan-wagon-2-25-inch-raw-409-stainless-steel-catback-exhaust-system

[@lando5680]

www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwjQlofXnZCBAxWf0BYFHW31ARIYABAOGgJ0bA&ae=2&gclid=CjwKCAjw3dCnBhBCEiwAVvLcu2XYMS5Ip5UfdVx5a8SQwzMpnDCLy6x5rHKz0ghM4_m8u-yhoeazJxoCF6EQAvD_BwE&ohost=www.google.com.au&cid=CAESa-D2VRzBgn6r-WSdHbFwz5ET0Pb3BStCG-kBCaRMoG0EHJ4s0dLjIOypPRhqHWkKUNAULhbyiMrZ5SQDK0Cky3Go3P-2KJKn1c-15bbBHl-DpTgZGe4QCpjq2JC6hMyfOrCiw4ix7gD1Zafx&sig=AOD64_22RvF3ji4JKwN4Jz8giuUufiT3YQ&ctype=5&q=&ved=2ahUKEwjmsoHXnZCBAxVbglYBHZ6hCz0Qwg8oAHoECAIQDA&adurl=

[@abae.2764]

Thanks

[@D800Lover]

BTW, does the high flow cats influence the sound?

[@lando5680]

Yeah a little, the size difference between the xforce and stock is crazy

[@jarrodgillan8188]

was it just a matter of bolting on the high flow cats or was there some welding to be done to it?

[@lando5680]

Bolt on, straight from xforce

[@jarrodgillan8188]

@@lando5680 thanks man, I’m loving the sound and gunna get it done to mine

[@lando5680]

@@jarrodgillan8188 anytime man, glad to help

[@ExiaI]

@@jarrodgillan8188u get it done?

[@trixpshorts2753]

Did yours end up working

[@davidbaker6144]

with replacing the factory cats have you incurred any engine lights?

[@lando5680]

Yes, but the tuner got rid of the code

[@davidbaker6144]

Wouldn’t that just stop the engine light from coming on if any thing else happens to the engine?

[@NickAntipas]

Would all of this make it no longer p plate legal in NSW?

[@lando5680]

Yes, mine was over the 130 power to weight ratio, but even when I was pulled over they never checked. So do it if you want to but chances are if you don’t drive like a numty you’ll be right 👍

[@yenneferofvengerberg0]

Hey mate, can I know why you wouldn’t recommend crackle tune?

[@lando5680]

I didn’t get the crackle tune only because, 1. I already own a V8 and that crackles and pops enough and 2. I didn’t want to be the stereotypical p plater v6 commy owner that put a crackle tune on there car 😂 and 3. I wanted to show other p platers and v6 owners that you don’t need a crackle tune for your car to sound "decent". But at the end of the day it’s your car so if you want to put one on go ahead 😀

[@yenneferofvengerberg0]

@@lando5680thanks for the reply appreciate it

[@codysavill5556]

@lando5680 does the car have headers?

[@lando5680]

@@codysavill5556 nope just high flow cats and the catback

[@blakebishop7546]

i have the 2.25 inch catback on my series 1, it has the mid section muffler do i replace it with some hotdogs? or should i get an x pipe or change the rear mufflers? kind of stuck atm! cheers

[@lando5680]

Change to mid hotdogs

[@wizzfizz6800]

if you remove the mid muffler expect a lot more drone lol and a worse sound. h pipe suits these anyway. the xforce 2.25 has an internal h pipe inside anyway

[@blakebishop7546]

@@wizzfizz6800 okay cheers man, i’ll definitely keep the mid section muffler then

[@callumyeaman7690]

i have a 2017 holden commodore Ute do i use the same exhaust or you use same exhaust but made for the Ute instead of the sedan or wagon

[@lando5680]

Just double check bro, make sure it says that it fits your Ute, some of the pipes are a bit longer in the Utes

[@wizzfizz6800]

So the xforce2.25 I got on as well isnt that loud, i’m considering getting high flow cats or resonated downpipes. Honestly how much louder did the hi flows get the catback to be that loud

[@lando5680]

Not gonna do too much, I have the cat back and the high flow cats in this video, it’ll also take some time for the exhaust to burn in aswell mine took about a month to notice a difference.

[@wizzfizz6800]

@@lando5680wait so do the hi flow cats already make the burble and pop sound? Sounds fckn good

[@lando5680]

@@wizzfizz6800 whatever is shown in the video is on my car currently, so yes they do however you may need to get a tune to make it sound like what my car does in the video. The high flow cats will make it pop but they’ll need the high flow exhaust and the otr for the pops to sound really good.

[@wizzfizz6800]

@@lando5680 yeah mate I already have mine tuned with the Orssom Otr and with the xforce 2.25”

[@Shivaay0111]

@@wizzfizz6800hoped it?

[@johnodonnell1222]

I’m running a vcm otr, black ops 2.25inch Catback with the high flow cats. Car is booked in for a tune and I didn’t want the crackle tune, will mine pop without it after the tune?

[@lando5680]

I reckon it will if it doesn’t and it’s an auto try using sport mode that’ll help with the popping as you can control the rpm way more

[@AWH.007]

Nah if you specifically asked for a crackle tune and regular performance tune, it will. If you just asked for a performance tune, chances are it wont.

[@chiefwero8360]

What sort of power is it making after ?

[@lando5680]

256kw engine and 210rwkw

[@trixpshorts2753]

I got a Holden commodore vf series 2 will the high flow cats fit on my car

[@lando5680]

Yes they should, I’ve seen them on series 2 before

[@davidbaker6144]

what kind of tune did you get?

[@lando5680]

Custom dyno tune, just adjusted the car to accommodate for the new exhaust and intake

[@liamgurry782]

Do you have to get it tuned ?

[@lando5680]

Yes or you’ll lose power because of the maf sensor, if it was a v8 you wouldn’t need too

[@tysonfielding9007]

What exhaust are you running?

[@lando5680]

The exact one that’s shown in the video

[@D800Lover]

Is this in Sydney?

[@lando5680]

@@D800Lover no, broken hill

[@D800Lover]

@@lando5680 Doesn't seem to be anybody in Sydney who can do a cat-back for a reasonable price. I see Melbourne, WA and now Broken Hill.

[@lando5680]

@@D800Lover just install it yourself bro it’s a simple bolt on so you should be fine, me and my mates did that

[@D800Lover]

@@lando5680 Thanks. So I could buy, get it sent to me and I could take it to a local mechanic to install it for me, how much would they likely charge me.

[@D800Lover]

@@lando5680 Getting a bit agey, if you know what I mean. I have a VF Series 2 MY17 wagon.

[@codysavill5556]

Empire performance 3” hotdog muffler delete w pop bang tune and otr intake is loud

[@AJ_VF]

Any videos? Not sure if I wanna get this setup or an empire set up

[@Shivaay0111]

@@AJ_VFnot looking loud, looking god sound

[@milzie-7206]

Is this an lfx?

[@lando5680]

Yes sir it is

[@Shivaay0111]

What’s that

[@Shivaay0111]

What’s that

[@ay2n109]

@@Shivaay0111 november 2011 to 2017 all the 3.6L V6's changed from the previous generation LLT V6 to the newer LFX V6, these engines are quite different with the LFX having integrated headers so its just 1 pipe from the engine and the timing chain issues of the LLT being pretty much fixed also 6kg lighter than the LLT.

[@ashthorne8292]

is the otr necessary

[@lando5680]

@@ashthorne8292 no, you can hear what it sounds like in another video of mine Hotdogs vs full exhaust system, that was before I put the otr on, the otr is really only for prefomance and helps with the popping at the back of the car

[@ashthorne8292]

@@lando5680 doesn’t seem like they make the otrs for the v6 ve’s cai work?

[@lando5680]

The Vf one should work it had VE/VF when I bought it

[@Quexty8232]

Hey man would all this work on a ve sv6 wagon?

[@lando5680]

Might have different outcome power wise but yes, it will work just make sure you get the exhaust that says wagon 👍

[@Quexty8232]

@@lando5680 thanks man appreciate it

[@WilBartlett-g2r]

What exhaust u running

[@lando5680]

Exact same as what the video show bro

[@samcook3532]

That sounds mean

[@RICHYSUNCLE]

Yeah nah too much money for a alloytec 😊

[@Shivaay0111]

Yes it is, and how? Please let me know is it worth it or not