Anybody looking to do this on their 2nd Gen Mazda 3, please note you'll need spacers for the door's if they're deep. The window is now hitting the back of the speaker, make sure to roll them down for fitment notes and how much of a spacer, if you do need one, that you'll need. Happy Install!
@sentra973 жыл бұрын
How do i know if I have a second gen? Mine is a 2010 2.5L hatch white just like the one from the vid. Oh, I just answered my question 😆
@andrewlineberry20903 жыл бұрын
Hey i got a 2005 mazda 3 sedan fully stock, what speakers u suggest i throw in?
@ColtonRichter3 жыл бұрын
These work great 🙂
@elizabethcaron2970 Жыл бұрын
You can tear apart the old speaker and use a jig saw to cut the middle stuff off, then use a sander or blade to cut the trim the top edges so it's all flat and bam you don't have to buy spacers.
@islrubsca23302 ай бұрын
@@elizabethcaron2970 If you use the old mount as a spacer by removing the middle section and the top edge, how do you connect the new speaker to the modified old factory mount?
@jacelawton47743 жыл бұрын
Why did this video make me cry 🥲😂 Was so much fun to chill again. I’ll be up to see you in your neck of the woods soon buddy!
@ColtonRichter3 жыл бұрын
Best video of 2021 ❤
@rockysmumakagma3 жыл бұрын
Thanx boyzzzzzzzz 🔥🎶
@ColtonRichter3 жыл бұрын
🔊
@RatAvenue3 жыл бұрын
The return of Samir
@samirhilal1923 жыл бұрын
Oh ya bb
@ColtonRichter3 жыл бұрын
Croc Boi
@jacobglas95572 жыл бұрын
Not going to lie, for some reason, them stock speakers bang if you tune your after market radio right. But yeah, I'm still swapping mine out
@slamcrank2 жыл бұрын
Man, this is absolutely true. I put in an Alpine aftermarket radio and was about to do a speaker replacement, but tuning the radio right just made the stock speakers sound amazing. Didn't even upgrade the speakers.
@ziratik7794 Жыл бұрын
@@slamcrank how do I tune it right
@balljiggle35113 жыл бұрын
Love the Mazda vids💯
@ColtonRichter3 жыл бұрын
Thank you, sir!
@zacktobeck4115 Жыл бұрын
I have a 2009 mazda 3 maxx sport and confused with what speakers will fit
@Jackalski573 жыл бұрын
Thanks, I love it! The left front speaker on my 2010 has some buzzing issues at times and I'm thinking of fixing what's likely loose screws or upgrading the speakers when the weather gets better. My only concern is that it didn't look like you drilled the hole larger and use a rubber grommet to protect the wires. I've seen too many things fail from wires getting cut by sharp hole edges.
@ColtonRichter3 жыл бұрын
That portion of wire won't move, and the fabric that is wrapped around the wires acts as a grommet. Nothing will be chopped, all open metal was also covered behind the camera for extra protection 🙂
@Jackalski573 жыл бұрын
@@ColtonRichter Excellent!
@sebastian993 Жыл бұрын
i think you'll find the rear speakers are running off the front (series wiring), hence the reason they use 2 wires
@JJ-qw9uv15 күн бұрын
Which wires are positive and negative? Front and rear speakers.
@ColtonRichter15 күн бұрын
Black wire white stripe is normally your positive
@JJ-qw9uv15 күн бұрын
@@ColtonRichter Ok. Four wires in front speakers. Which colors did you put together?
@JJ-qw9uv15 күн бұрын
@@ColtonRichter I have Mazda 6 GH, but i think the wire colors are same.
@zacktobeck4115 Жыл бұрын
Which wire is positive and negative
@sentra973 жыл бұрын
This is gonna be a mission for me. I aint tech savvy. Guess I'll have to call some re-enforcments
@ColtonRichter3 жыл бұрын
Haha, get it!
@Apolac3 жыл бұрын
I ain't tech savvy either and I got mine done too. In fact, I got an android radio installed on mine. It was a pain in the butt, but it is doable. Fyi: even if the speakers say that 6x8 is the same as the 5x7, buy them 5x7! The bigger one, the magnet gets in the way of the window. You will have to buy spacers🙄.
@Taylor-mi6ou3 жыл бұрын
Homie could you drop the link to the speakers?
@ColtonRichter3 жыл бұрын
bit.ly/3s1ajFB
@bricegraham82563 жыл бұрын
Samir is on stuff in this episode
@ColtonRichter3 жыл бұрын
He always is, he wears Crocs in the winter
@bricegraham82563 жыл бұрын
@@ColtonRichter 😂, I couldn't
@Apolac3 жыл бұрын
And here I am thinking, damn I should've watch this video first before trying to install my speakers on my Mazda 3 2010! Oh boy! You guys are taking too many parts out just to take that door panel out. Also, those 2 extra wires, I don't have them connected. They were previously connected to aftermarket tweeters which are no longer working. My speakers are working fine. Idk how but they are. I will eventually add new tweeters tho. Not hating, just giving advise, since I have had to take those door panels off like 10 times!🤣
@Castiel_Pr3 жыл бұрын
👍🏻
@thethreeking61272 жыл бұрын
Hey bro, would the 6x9 speaker will fit to the 1st gen mazda 3?