My every day carry is a Glock 42 with Trijicon HD XR Night Sights and a 9 round ETS magazine fitted with an XGRIP for a full three-finger grip. I load the magazine with 8 rounds maximum, plus one in the chamber, to ensure 100% reliability. Ammo of choice is Underwood Extreme Penetrator 380+P. This combination has very little recoil, is very controllable and EXTREMELY accurate! I carry it 24/7 in a pocket holster and honestly it's so light and compact that I forget it's there. The best self-defense pistol is the one you never leave home without!
@douglasphillips242 жыл бұрын
I got 4 extensions for my G43 that holds 7 rounds now. Love the new G43X as well. Thanks for sharing.
@thepracticaltacticalminima39402 жыл бұрын
The Pearce ones or another brand? Would you recommend them?
@douglasphillips242 жыл бұрын
@@thepracticaltacticalminima3940 they work great for my 43 +1 & + 1 G27 mags.
@sickboy7032 жыл бұрын
Love my g42 and 43. For myself I went with the taran tactical +1's on both and good to go. I've seem some great reviews on the pearce extensions I just found taran first. Great vid
@thepracticaltacticalminima39402 жыл бұрын
Definitely, the taran tactical ones are good to go and the highest quality I've seen. The only problem is i like to have the same extension on all my mags, and I can't drop that kind of dough! I have way too many G42 mags.
@deano51502 жыл бұрын
The Mag Guts follower and spring kit will work with the Pearce Grips plus one extension. I have two mags using both giving me 8 rounds per mag plus one in the chamber. I’ve fired hundreds of rounds through them with no malfunctions. The Mag Guts are a bit pricey, though.
@thepracticaltacticalminima39402 жыл бұрын
I’ve had real bad luck with magguts over time, but I will look into it! It’s been years now. Thanks for the comment.
@deano51502 жыл бұрын
@@Mike-4547 I used the original springs in my mags. Same with the Shield. The Mag Guts worked flawlessly for both my 7 and 8 round mags.
@October.282 жыл бұрын
I tried that holster you basically gotta yank the gun out
@thepracticaltacticalminima39402 жыл бұрын
Adjust the retention a bit. It should click in but come out without a ton of force.
@Turbospoo12 жыл бұрын
Hi, Where is your slide from?
@thepracticaltacticalminima39402 жыл бұрын
I don’t remember where I bought it. It is a Patriot Ordinance Factory Gentleman slide. I’m doing a 1,000 review shortly
@blessing712 ай бұрын
My regular EDC is the Glock 42, with over 3,000 rounds in past 2 years. I installed MagGuts spring/follower in my Glock 42 magazine, giving it 7 rounds in the same space, yielding 7 +1. Zero issues; I highly recommend MagGuts. For pocket carry, I use the Sticky holster. For my spare mag, I use Strike Industries EMP +2, which gives 8 rounds. Again zero issues. Recently I installed the Vickers Tactical slide stop, making it easier to manipulate. Otherwise, my 42 is factory standard. The key to using 380 for professional defense is the right ammo, which, for me, is either Fiocchi Extrema XPT or Hornady XPT; actually any XPT round works great. magguts.com/product/glock-42/
@colt10mmsecurity682 жыл бұрын
These Pearce mag +1 extensions don’t work to feed the very last round into the Glock 43 9mm when loaded with heavy 147gr bullets. I don’t know why, but it’s unreliable. When shooting the lighter weight bullets of 115 or 124 gr 9mm, then the last round will feed. I removed all of my extensions and put back the factory base plates on my 43 because of reliability issues. I’m curious as to how these +1’s do on the Glock 42 model with the heavier .380 bullets like the HST 99gr or the Remington 102gr Golden Saber round. I just buy the Glock factory mags that come with their +0 pinky extension. 6+1 and a few spares mags in the pants pockets works for me.
@thepracticaltacticalminima39402 жыл бұрын
Great to know! I haven’t seen that issue but I tend to use lighter grain rounds these days.
@gwidwock11 ай бұрын
Do I need to replace the spring or do you use the factory magazine spring. I saw a video where someone bought a spring for the +1 extension.
@thepracticaltacticalminima39408 ай бұрын
You can buy an increased lower spring but I haven’t seen it to be necessary with the plus one magazines
@brentfoto2 жыл бұрын
Great video that convinced me to purchase the PG - 42. Very informative.
@thepracticaltacticalminima3940 Жыл бұрын
Hey! Make sure to check back in with your thoughts after you get some use on them.
@brentfoto Жыл бұрын
@@thepracticaltacticalminima3940 It may be a while before I get to the range. In the meantime, I had considerably more difficulty disassembling the magazine and installing the PG-42 on the first of two but second was a lot better!
@probassguitarsound3 ай бұрын
Take the follower out and use a Dremel tool or sandpaper or a side grinder grind the follower down and easily fit seven rounds in a stock magazine
@4deuce312 жыл бұрын
Try Strike Industries +2 extension. THAT'S the best one.
@thepracticaltacticalminima39402 жыл бұрын
I did, that's what I replaced. I'm glad they are working for you though.
@MaineGreenCrabs Жыл бұрын
I have a factory Glock pinky extension and hate it as it’s just long enough that it prints on my pocket holster badly and even with IWB. I only carry it as my spare now, and carry the flush mag which does not print, and feels/shoots fine.
@thepracticaltacticalminima3940 Жыл бұрын
Nice! Every body is different. Gotta do what works for you
@efm21698 ай бұрын
I put a pierce+1 finger extension on one of my Glock 42 mags. The 7th round is insanely difficult to put into magazine and when i have one in the chamber and 7 rounds in the magazine it will shoot and it will not eject the first round or it will eject it but not chamber the next round. I tried about 8 different times and would not work. So I just left it as 6 in the mag and one in the chamber now and that works fine. Too bad it didn’t work for me.
@thepracticaltacticalminima39408 ай бұрын
Very strange! Thank you for the report. What generation is your magazine?
@Gieszkanne Жыл бұрын
Have you tried the +1 follower from Magguts?
@thepracticaltacticalminima3940 Жыл бұрын
I haven’t. I tried a bunch of their products close to a decade ago and they were very unreliable. I’ve since heard they are way better now, I’ll have to try some!
@roadking6818 ай бұрын
Strike industries makes the best 8 round mag extensions and its an easy mag plate only swap out and the texture on it is identical to the oem 42 grip. And they work flawlessly, I have several hundred rounds through mine and no issues. U R the first person I've heard that had problems with the Strike Industries. Pearce are nice too if u only want 7 rounds.
@thepracticaltacticalminima39407 ай бұрын
Thanks
@samchristo17457 ай бұрын
I started to question my purchase of the SI extensions, but so far so good 200 rounds flawlessly and easy to load. 👍
@kevinrichardson88592 ай бұрын
T þ
@mikeanderson21522 жыл бұрын
Where did you get your gun holster? And where did you get your magazine?
@thepracticaltacticalminima39402 жыл бұрын
Desantis G42 Holster - amzn.to/3S7S0fR Pearce +1 you have to look around for, they aren't in stock at a lot of places.
@Tom-jw1pe7 ай бұрын
What kinda slide is that?🔥🔥🔥
@thepracticaltacticalminima39407 ай бұрын
POF Gentleman Slide
@HERBOWITZ8 ай бұрын
What holster is that in the video?
@thepracticaltacticalminima39408 ай бұрын
Desantis slim tuk. I did a video on it
@gregwaters8371 Жыл бұрын
Hey where did u get that slide from ?
@thepracticaltacticalminima3940 Жыл бұрын
I don't remember, it's the POF Gentleman Slide. It's been long discontinued I believe.
@TheSouthpawSharpshooter2 жыл бұрын
Thanks for the vid man.
@thepracticaltacticalminima39402 жыл бұрын
Thanks for the support!
@ozziemcsa2 жыл бұрын
Very informative. What type of holster shown on this video?
@thepracticaltacticalminima39402 жыл бұрын
Thanks for the comment, it’s a desantis slim tuk. Here’s the video about it - kzbin.info/www/bejne/bWKlZpSieqeVmJI
@realtalk36532 жыл бұрын
You didn’t comment on Hyve ??
@thepracticaltacticalminima39402 жыл бұрын
Right, I don't like the hyve ones on the 43 so I haven't tried them on the 42.
@GgDd-v6u9 ай бұрын
What holster are you using
@thepracticaltacticalminima39408 ай бұрын
I believe that is the desantis. It’s like $20 on Amazon last I checked,
@thepracticaltacticalminima39408 ай бұрын
Desantis slim tuk
@clips4days10 Жыл бұрын
what slide is that
@thepracticaltacticalminima3940 Жыл бұрын
POF Gentleman
@reverngrant5542 Жыл бұрын
Awesome
@thepracticaltacticalminima39407 ай бұрын
Thanks
@darrellwoods59613 ай бұрын
Nope. I use ETS Magazines 9 or 12 round. They Work Well.!
@ronkerstetter24632 жыл бұрын
Where did you get your slide for your 42?
@thepracticaltacticalminima39402 жыл бұрын
Gun prime I believe
@daryldavis56157 ай бұрын
No offense you shelled out a lot of money for 1 yes 1 additional round. I am sorry but that’s not practical. Better off be proficient and make your 7 rounds count
@ITS-yk5ky13 күн бұрын
Why do you care what he spent? Did it come out of your wallet?
@steverugerguy96062 жыл бұрын
I like the oem extensions....part #6362....problem is extremely hard to find.
@thepracticaltacticalminima39402 жыл бұрын
Hard to find, and Glock never gave us increased capacity like they did on the double stacks. It’s hard to go away from OEM though, I understand that dilemma
@robertlipsey60562 жыл бұрын
There was absolutely no reliability issues with 7 rds in the magazine and one in the chamber? I have the Glock 42 and would like the extra rd but not at the expense of reliability. Good video by the way.
@thepracticaltacticalminima39402 жыл бұрын
Right, yes sir. I always +1 when I carry, and I have not had any reliability issues with half a dozen of these mags/extensions at this point.
@robertlipsey60562 жыл бұрын
Thank you for getting back to me. I’ll give one a try.