The Best Way To Clean Dirty Engine Parts

[@CameronNiemela]

Build your own heated parts washer! goo.gl/pmuSfK Giveaway ends on Tuesday, January 16th at 10AM PST

[@HOTSHOT-ls1bc]

Cameron Niemela thanks

[@pjbuckmaster]

Great stuff man!

[@coloradodirtbike5930]

Hey cam, that Aluminum wheel cleaner that you use, can you use that on the engine cases and jug?

[@mitjagajic750]

Man I just can't resist your content anymore

[@jameshatfield6814]

What cleaner were you using in your parts washer. Doesn’t look like simple green..

[@saltyprocrastinator]

Was about to go for a group ride, saw the notification and clicked it, texted them told'em I'll be 9 mins late. That new tank looks amazing, and these cleaning vids are so satisfying to watch!

[@killerkork]

Hey Cameron, wanted to let you know, I ended up getting my stolen bike back !! I posted it everywhere and with help from the local auto thieft detective, tips from people replying to my posts and alot of detective work on my part (I feel like I could join the agency now lol) But yeah, long story short...I got it back and I couldn't be happier !! Thank goodness for the snow and the cold or that bike would probably be dooing wheelies down the street for the past two weeks !! Thanks for your concern buddy and keep up the great work !! ps that new parts cleaner looks like a must, I gotta get one !!

[@onthatdove]

Hey Cameron, I've watched you videos for the past 6 months and love them greatly. I'm learning SO MUCH and because of your vids, I've built up enough confidence to have already bought and flipped five bikes since October of last year as a means to teach my 10 yr old son to learn with me. Keep up the generosity of sharing your knowledge and experiences with the world around you!

[@CameronNiemela]

That is so awesome to hear! Thanks for watching the videos!

[@onthatdove]

Cameron Niemela, where did you get the green brush from?

[@mxcollin95]

What degreaser are you using in your parts washer?

[@hansen3bd]

What fluid are you using in the tank? Looks awesome!

[@Corras_1]

You deserve so much more attention and attraction than you are getting at the moment..love you man

[@ExplosiveBrotherhood]

Awesome video, just what I needed! Is that simple green or a different degreaser in the parts washer?

[@domonicgregory7116]

What detergent are you using ? And any links on how to make the cleaner. Great stuff

[@hammershigh]

What about the bearings?

[@apudggysquirrel1974]

Your should make a video on common problems to look for when buying a used bike

[@ADDOIL.718]

i agree

[@skippygirl959]

Would be cool to see you rebuild an engine!

[@ReplayDaBanger]

Definitely

[@BrokenSprocket]

Great video. No one cleans bike parts like you its like a passion for you.

[@TortureTestMagazine]

Awesome, thanks for making that course on the parts washer. Went ahead and enrolled. I'll be investing in that sometime this year. Thanks so much and keep up the great work!

[@CameronNiemela]

Thank you so much!! Let me know if you have any questions.

[@donny.l.j]

Love your video. Is it ok to clean stator with soap and water?

[@paymanhocynpure8551]

You are golden hands👌 What's liquide wash water?

[@Evil_Morty2000]

These videos are so therapeutic

[@j.d.7321]

Thanks Cameron awesome tank. What solution are you using?

[@ProMotoo]

Hey man awesome. I have a question. On my bike the cases are Black. How Can i make Them look like these cases. Should i sandblast or What should i do? Thanks

[@MortifiedU]

Paint stripper will strip the powder coat, you can buy a special paint stripper for powder coat.

[@reillydennison4161]

what liquid/degreaser are you using in the new tank for cleaning the casings?

[@sdqsdq6274]

guess u didnt click the link

[@reillydennison4161]

sdq sdq not located in the US my man😂👎

[@sdqsdq6274]

u didnt even click the link, look at it ,u will find the ans to your question

[@reillydennison4161]

sdq sdq yeah i did, but he sometimes uses simple green so i wasnt sure

[@jayash6108]

replacing crank, but cleans it anyway.

[@johnnyappleseed888]

how would you know what parts can rust or not? like is the crank aluminum so it doesnt rust? or would you recommend spraying everything down with WD-40 just to be safe?

[@coltonquintana5703]

I have four wheeler cases that are pretty ugly due to the last owner letting the mud cook on the cases and I wanna clean them good . The cases are split apart but Will it hurt the bearings at all ? And how do you dry them ? Air dry ? Thank you it be a big help

[@victorcoots3802]

Cameron, awesome stuff....just curious as to why you didn't go ahead and pull the bearings before you cleaned the cases?

[@Mr138AJ]

Amazing work dude, i am impressed. keep up the good work.

[@shanek6582]

What fluid do you use in the parts washer? Thanks.

[@jackadactyl5590]

Hey I was just wandering I have some corrosion on my cases and I just want to know if aluminium cleaner (acid like solution) would damage my cases?

[@joshsmitherman8405]

What kind of acid do you use or what did you use to clean the parts?

[@4206447]

What parts cleaner/degreaser are you using.... It don't look like simple green in the video

[@tomnekuda925]

Cam, what are you using for cleaning fluid? I assume water and.............? Thanks, Tom

[@trackjunkieray7399]

he uses purple simple green. www.amazon.com/gp/product/B00103YQ88/ref=crt_ewc_img_dp_3?ie=UTF8&psc=1&smid=ATVPDKIKX0DER

[@brentveitch4572]

That parts washer looks awesome!!!!! Can I still find out how to build one I know you made this video a long time age.

[@CameronNiemela]

It's great man, love using it. Yes, the video course is still active

[@johnbates5905]

What cleaning fluid do you use in the tank, great video

[@trackjunkieray7399]

he uses purple simple green. www.amazon.com/gp/product/B00103YQ88/ref=crt_ewc_img_dp_3?ie=UTF8&psc=1&smid=ATVPDKIKX0DER

[@Tristandow74]

get a wrench rabbit kit comes with piston rings crank every bearing seal in the motor. great kit.

[@177Iceman]

You should go with the wrench rabbit rebuild kit. Has everything needed to rebuild top and bottom end

[@wanebarratt5916]

What chemical do you use when washing and soaking the pats?

[@jach8402]

What are you using as a solvant to clean the parts?

[@Motoinc]

What cind of liquid mix do you use in the washer?

[@curtiswilcock5628]

I’m defiantly going to build a parts washer at my house for my Rmz 450 project as the parts pretty dirty 😊 thanks for information and really can’t wait for next video really enjoying the build 😍

[@sammyturner3658]

Can you clean your cases with aluminum cleaner?

[@brettcoop9149]

I signed up for the course. Excellent instructions, it's a very smart and clever design. Nice job Cameron.

[@CameronNiemela]

Thank you so much!! Glad you found it helpful and let me know if any questions arise.

[@traxxi2003]

What cleaning solution did you use on the parts washer?

[@alexkyrkopoulos9480]

Nice video! How much degreaser do you put in the tank? i suppose its a 75Liters tank? thanks!

[@CameronNiemela]

I use 3 gallons of degreaser and 7 gallons of water

[@alexkyrkopoulos9480]

Cameron Niemela thanks brother!

[@Fifflish]

Why do you clean the parts that you gonna repace? and why are you cleaning the blocks with the old bearings in or are you keeping them? :)

[@jacksonshellhaas5891]

You probably won’t see this but what did you put in the heated tank like fluid wise

[@Marvelfunfaqs]

Just joined your Build your own Parts Washer course. You, You are something.... excellent Idea and the course is beautifully done. I'm in NY and i have been slacking on cleaning parts because it was to Freaking cold, dealing with water. This is perfect for me and Thank you so much for the course. 10 thumbs up

[@CameronNiemela]

Thank you so much for the positive feedback Marvin! You're going to love a heated parts washer! Definitely my favorite piece of equipment in the shop.

[@MountainManKm]

What solution are you using??? mineral spirits?

[@blakesidwell9682]

Hey cameron, quick question. Does the water get into those main engine bearings and mess them up? I wanna clean up my bike but im worried ill ruin some of my decent parts

[@CameronNiemela]

No, the cleaning solution does not cause any damage to bearings or seals.

[@iShadowMtn]

Wish I had one of those tanks in my garage. Is it a tank filled with solvent?

[@keithlarge1151]

Probably water based cleaner.. with a rust inhibitor...

[@kevinriess]

Hey Cameron, I have a question about the Parts Cleaner course, is it $200 including the parts cleaner tank? Or is it $200 for the aftermarket stuff to add on to it? Just want to know before I buy the course! Thanks-

[@CameronNiemela]

Hello Kevin, the $200 is total including the tank. Thanks!

[@kevinriess]

Cameron Niemela Alright sounds good! Can’t wait to build this thing!

[@CameronNiemela]

Good luck! Let me know if you have any questions

[@kevinriess]

Cameron Niemela alright thank you!

[@kubazdr4404]

My favorite channel on youtube!

[@brycemyers6668]

How do I enter the give away? And you’ve inspired me a lot I do want you do except I don’t part out bike I fix them and resell them and it’s a good way to earn a little bit

[@CameronNiemela]

Thanks for watching! The course is available here goo.gl/pmuSfK

[@jonnymillis1098]

hi Cam, about the course, am I likely to find the same parts I need in the UK?

[@CameronNiemela]

Yes, the parts are very common. As long as you can source the tank the rest of the parts are easy to find.

[@bradstreeservicellc2894]

Hey Cam, where can i get the mag wheel cleaner?

[@Jordancapz]

Best informational dirt bike content on KZbin!

[@sugengdiablo6925]

What chemical did u used,for soakin?

[@Abcd-hr9ot]

i gave used dollar store oven cleaner and got decent results thanks 4 d video

[@blazbencic5453]

Hey man do you know where i could get mag wheel cleaner in europe, i cant find it anywhere!

[@danielshaha8849]

Love you videos! Keep up the good work. I'm going to start building the tank tonight!!!

[@CameronNiemela]

Thanks so much Daniel! Feel free to send me an email if any questions come up.

[@adamp4491]

Really a great product you put together, nice job!

[@lindenphilippson]

Hypnotized by your cleaning skills man!!

[@matbrule1455]

could you ship to Canada?

[@michaelbowman323]

Is this safe for seals and bearings?

[@thatdesertmoto4923]

I can’t wait to see u put it back together

[@martin_11]

Please make a video about putting it back together 😀

[@thewolfdogy2895]

The parts with cables on em, doesnt the degreaser damage it in any way? and awesome vid like usually!

[@JRube123]

How do you get the top of the parts washer to lay back like in the video

[@CameronNiemela]

I took out the pin on the lid shock

[@randolphkerr6871]

I noticed you didnt remove the needle bearings for clutch pull in case, why not? I rebuilt mine and they were the hardest part of the build.

[@marcooneill7048]

What fluid are you using?

[@Henrik5360]

That bike will look miiiiint!!

[@joslinnick]

What brand of degreaser do you recommend?

[@trackjunkieray7399]

he uses purple simple green. he says it in another video. www.amazon.com/gp/product/B00103YQ88/ref=crt_ewc_img_dp_3?ie=UTF8&psc=1&smid=ATVPDKIKX0DER

[@reillydennison4161]

i got that parts washer recently

[@alepecchio]

Hi Cameron, I am in Venezuela and can not access you parts washer course, it says: "The owner of this website (cameronniemela.com) has banned the country or region your IP address is in (VE) from accessing this website." How can I get access??

[@Max.McG17x]

I love the CR250 build because I have a CR250R myself

[@dylanmonen9881]

What solution are you using!!!

[@jmt8549]

Keep making these videos! Love to watch your content I am a supermoto rider but some tips are still very usable to keep the bike clean. This year i am going to make a dream true and buy myself my dreambike that i want to have since i was 16. Now i'm 18, got my driverslicens (Class a2 ,yes i am from germany) and in the next vew weeks i'm going to buy a husqvarna 701 supermoto. I am so hyped to get it :)

[@McNamEvan]

Is it safe to wash bearings and seals that are intended for re use?

[@CameronNiemela]

Yes, absolutely

[@McNamEvan]

Cameron Niemela Thanks. What kind of fluid do you run through the wash ? Also how do you dry parts do you oven ?

[@T4CO1776]

wow. i need to build one

[@blazbencic5453]

How do you call these type of tanks? And what's the price of one of those?

[@CameronNiemela]

It is a heated parts washing tank. They are custom built, more info here goo.gl/pmuSfK

[@johnriley7404]

where can i find your heated soak tank? or how can i make one?

[@CameronNiemela]

goo.gl/pmuSfK

[@novembersierra7333]

awesome vid dude! would love to know how to build this, i have a bike im tearing down come warm weather lol

[@CameronNiemela]

Hey it can be done by anyone! Very easy to build by following the instructions goo.gl/pmuSfK

[@brockziebart260]

Just a suggestion but when u clean all that dirt and grime in that tank u should get some type of scimmer to clean it out.

[@Ostenmaster122]

Do you just use ordinary soap water?

[@CamRSaws]

These videos are so satisfying

[@simplyriding1199]

I love these videos. I learn so much by watching you assemble and disassemble. But one question though: why did you waste time cleaning the parts you were going to replace anyways?

[@RTXti-ld7dx]

He may not have known the extent of the damage until it was throughly cleaned to inspect it...

[@mxrider2strokebraaap54]

Really nice video as always! You put so much effort into all the work and I think it will pay off at the end👌

[@aussiedigger1441]

The fingers on the clutch basket looked in great shape no notches were the friction plates wack up against. Love your cleaning tub Cam, do you use kerosene or some other solvent. Love your work mate. Damm I thought I don't qualify for give away's. I wish I lived in the states part's for my 01 kx250 would be much much easier to get!

[@TheToycloser]

What are you using for cleaning fluid? Looks like dish soap.

[@CameronNiemela]

Degreaser

[@paulfallasgranados6462]

what is that magic fluid in the whasher???

[@trackjunkieray7399]

he uses the purple simple green. www.amazon.com/gp/product/B00103YQ88/ref=crt_ewc_img_dp_3?ie=UTF8&psc=1&smid=ATVPDKIKX0DER

[@martins4769]

the needle bearing on the transmissio shaft will rust

[@brentveitch4572]

I built one of your tanks!!!!! Wish I had years ago it’s awesome. Thanks.

[@CameronNiemela]

Great to hear Brent! They're pretty sweet!

[@OGAstra]

Your reusing the old crank?

[@reecebonenfant3273]

Yes bro !!!!! Thank you for sharing your tricks this is rad going to build one

[@2strokesonly221]

What solution do you use?

[@ethansmith244]

My dad builds those for his shops. Im gonna have to get one.

[@kurtmorelli]

Just amazing Cameron, thanks for sharing and best regards from Argentina!

[@jonystewartCLGE]

woow it's so clean, continuous like that, I love what you do! Do you think of doing a KTM? 👍🏻😋🏍🇫🇷

[@blakeogan2295]

Keep up the hard work and vids love seeing clean mx parts👍👊

[@JMoney3425]

Would you sell the cylinder