The bucket you never knew you wanted for your Chinese mini excavator

[@Steven-h33]

Like your videos my type of content currently have a kymron on order with k&r equipment the yh14 fully loaded package I could gladly make you some bushings you would just have to cut the old ones off and weld on the new ones

[@thebeardedhomesteader]

@Steven-h33 I want to get a groundhog bh40d-2 the kymron look good to and thanks for the offer

[@jtsokiehobbyandadventures6666]

If you have play with 7/8 bolt. Go buy some 3/4 electrical conduet. Split down the side and cut to length. Put the conduet in between ears and put bolt in.will need to hammer it in. Put nut on your done

[@thebeardedhomesteader]

@@jtsokiehobbyandadventures6666 thanks for the info

[@jtsokiehobbyandadventures6666]

@@thebeardedhomesteader I made a video where it shows how much it takes the play out.

[@thebeardedhomesteader]

@@jtsokiehobbyandadventures6666 so far the quick connect works well but it's going to need some work starting to pull the bolt through the front

[@jtsokiehobbyandadventures6666]

@thebeardedhomesteader I wound up buying a long nut and standard bolts. Drilling out and welding the long nut in. The metric bolt I broke one. Striped one out. And finding long metric bolts in Oklahoma are hard to find and costly. And I put a flat washer on the bolt head to stop the wearing. If you happen to break your quick jaw. It can be welded back together. I have don't it

[@thebeardedhomesteader]

@jtsokiehobbyandadventures6666 yeah I was thinking on the washer so far haven't broken the bolt I just put wd40 on it b4 hitting it with impact

[@derekdal5185]

the solution is these are asian.. 25mm is the size which is not equivalent to 1 inch but its close

[@thebeardedhomesteader]

@derekdal5185 true it's close but not right why I got a quick connect