The Build Part 1

[@bakedchefsweden]

Thanks for sharing. Big support from Sweden

[@dipster14]

Into the car scene too i noticed. The shirt says it all! 🤣 great shelter for the girls. Good job man

[@YellowPenguins]

I would be more if I won a car haha

[@dipster14]

@@YellowPenguins 🤣🤣 i know right. Its a long shot

[@craftgrow]

Looking nice👍

[@damiancarrillo6119]

Love the build

[@mrrider391]

Looks good I’m big fan of what you do ! From the genetics to the nutes you use !💯

[@justinomar9210]

You should build a hammock so when you and the Mrs is on strike you can sleep with your babies and if you want cheap insulation just use blankets on the wall 👍

[@hiddencreek4180]

Looking absolutely gorgeous bro 😎

[@BNG1_s]

I like the way you bring your imagination to life we have some of the same interests great job grow grow grow

[@YellowPenguins]

Appreciate it man! It’s a lot of fun!

[@terrencew4171]

cant wait to see this getting done.

[@klosiemorris9896]

Grow room looking pretty cool and is it a much for ventilation in your room

[@hiddencreek4180]

Led is definitely the way too go bro for sure

[@jujuking9502]

Awesome shed. Is it okay to spray caulk over the wires like this?

[@charleswilliams7766]

Vinyl flooring is nice but don’t cheap out on the foam padding because the floor will buckle from moisture. Very nice build dude

[@westoe]

Looking good can’t wait for it to be done

[@will69forfood39]

should have made it so the door opens outwards you would be amazed what that xtra room can be used for haha. looks dope gonna be some rolling tables that open up down the middle ? edit yes u are lol. i would lay a epovy primer on the osb and then epoxy the floor white. there is a gromau5 vid where he does it and shows how prob cost around the same but last and look better. unless these vids are behind and your done haha. then w.e shed still looks sick and gonna produce some fire

[@YellowPenguins]

Trust me I wanted to. But a left handed outswing was a special order item. The problem I have is that when I open the door my neighbor can see right in so I did a swing in so it’s somewhat harder to see the tables and the girls from their living room. I didn’t even want to put the door where I did but it’s the only place that saved me space inside.

[@will69forfood39]

@@YellowPenguins ya the things we dont see were all experts sitting on yt haha. you did a good job!

[@MarsHydro_official]

Congrats!

[@hiddencreek4180]

Amazing production bro looks great

[@the__grow__life8211]

Ok i should of watch before i ask now i have a price rang were i need to save. Thanks ill have something like this in a couple years!

[@labootosgarden8823]

love it , im doing the same thing in my back yard a grow shed . i was gonna do a 12x16 but i might do 10x 20 now

[@1PRL_TIM]

We Need More

[@TriStateTrichomes]

i just finished my second room build. Takes a lot of time but its nice to know you can do it and as soon as you have it full you want more lol

[@fabioluciano8206]

You doing great man!!!! I wish you nothing but the best! Go on brother!!!

[@groovytunes2]

Looks great 👍. I have to ask where are you going to get your air from? But it's a nice Grow room. I would like that for myself.

[@chocolatetai-stckx4388]

Great build Looking amazing bro nice setup!

[@sunstirade1085]

Build a small stand for your Rez’s that they both sit on. This will spread all your weight out horizontally. Unistrut 🤟🏼 and for flooring, I have heard from an old head that running C02 will make your flooring off gas and cause issues in the grow. Not sure I don’t have personal exp with that.

[@TheDcPohl]

Looking good bud. I'm a mechanic by trade but after my first build I now feel like a plumber, electrician, and carpenter too. Lot of hats to wear 😅

[@YellowPenguins]

Me after, I’ll pay someone next time lol

[@TheDcPohl]

@@YellowPenguins lmao same. Or at least hire help. All took so much longer then I thought

[@avenge_fiend4538]

So is that a 120v breaker , I wanted to install I could do 12 lights just not sure about the electric, I don’t wanna blow anything up , I would be able to run all does with out anything bad happening

[@juper5052]

For your reservoirs just get a bottom Jack for support

[@YellowPenguins]

I’m not using the under the table res anymore moving to the barrels

[@scronbigz3134]

whoever disliked this video smokes heavy on mids.

[@nitr0junki3]

Man that building is gonna be tight. Are your floor joists 16” on center? I know you said there are 4x4s under the subfloor, but I’m curious exactly what your subfloor structure is. Also, as a flooring contractor, I would suggest an LVP product. There are some nearly waterproof products now that utilize both a full glue or floating installation option. Sheet vinyl is acceptable as well, I would just stay away from older felt/paper backed vinyl, I’d use the more modern solid fiber vinyl sheet.

[@YellowPenguins]

Floor joists are 24 on center should have done 16 cause everything else is 16 on center. We went with a thick vinyl sheeting

[@hiddencreek4180]

We are going with 14 ft ceilings so we can stack pallet racks in our flower room!!!

[@kd1677]

I have been day dreaming of a setup like that for a while slightly higher ceilings for damn near twice the sqft of grow space. Hell yeah!

[@SourBogBubble]

Research Pond liner for flooring. pretty sure it'll be 100x stronger and might actually cheaper.

[@cassandrahatfield4765]

When’s part 2 this is dopeeee

[@aimhigh4928]

Looks great what kind of leds are you running in there

[@joshr2280]

Looks awesome. Jealous. How come u didn’t run 240v for lights n dehumidifier?. Would of saved u on the electric bill and made it easier or your equipment

[@YellowPenguins]

The anden im using is a 120v

[@hiddencreek4180]

Vinyl flooring , the sheet stuff doesn’t take a lot of traffic ,,well the stuff we bought from home depot didn’t anyway lol so now we are looking at epoxy now too

[@YellowPenguins]

Yeah went with vinyl hopefully it lasts longer than that. So we will see.

[@kavemanjames1253]

Everything looks great. I would be scared of the rocks on the side slippin and destrying my hard work in few seconds.

[@YellowPenguins]

We had to take apart a fence that usually goes there it will be back up once it’s painted

[@spencergreen7105]

Add a layer of subfloor and get what u want

[@mikesomewhere7214]

How is air gonna be managed?

[@indoormagicgrows9486]

Ya sealed the cracks.

[@wbgrowers7680]

What kind of drywall are you using mildew resistant 1/2” sheet rock.

[@YellowPenguins]

PVC wall panels

[@bigsmall6948]

@@YellowPenguins do u use co2 in your grow tent...do one video how to set up co2 in grow tent ⛺..

[@the__grow__life8211]

How much would it cost for this build?

[@foedahaterz]

I would like to build the same exact room. Can you give me a complete supply list with prices for a complete build?

[@hiddencreek4180]

Bro you definitely could go over that with luan and then cover that with epoxy bro that’s gonna last lot longer that vynl flooring is junk man take my advice it only lasted 5-6 months in our first shop

[@wbgrowers7680]

5/8” for ceiling

[@Nick-B78]

That looks awesome dude with one exception…who the hell laid those electric cables?!? Admittedly I’m from the UK so it may be different but over here cables NEVER travel horizontally through a wall space! The cable runs around the room at the either floor or ceiling level and then gets to the outlet straight up or down. That way you know there’s never a live cable where you might want to drill a hole or whatever.

[@chrispypsp]

In the US they get run horizontally

[@YellowPenguins]

What he said.

[@Nick-B78]

@@chrispypsp ok I get that but it still doesn’t make sense to me

[@sunstirade1085]

I forgot to mention homie, green is photosynthetically reactive

[@GMZee559]

You need permits for this

[@glockkstar1335]

I’m finna come steal all yo shit !