The Complete Setup Guide for Zhiyun’s Image Transmission System

Here's how to assemble, set up, and update firmware for the Zhiyun transmount wireless image transmission system. The modules include the transmitter, receiver, motion sensor remote, transmount max and lite motors, as well as the quick-release pucks. Zhiyun's Wireless Image Transmission System is amazingly affordable. Knowing how to set it up and use it, is priceless.
GEAR in this episode:
WEEBILL-S Gimbal: bhpho.to/2p4ZqaZ
Wireless Transmitter: bhpho.to/2wpamn3
Wireless Receiver: bhpho.to/2SxmDye
Motion Sensor Remote: bit.ly/ZYremote
Phone Holder: bhpho.to/2olzesd
Transmount Max: bhpho.to/2WisdVB
Quick Release Plate (2 Pack): bhpho.to/2SRBWkn
WEEBILL-S Image Transmission Pro Package: bhpho.to/329M508
Let's connect - / garrettsammons
I made these for you - sellfy.com/garr...
The music I use fm.pxf.io/garrett
// #zhiyun #weebill-s #imagetransmission //
*This video is not sponsored and all opinions are my own. Some of the links listed above are affiliate links that I earn a small percentage from qualifying purchases. Any affiliate links you use helps me create new content and costs nothing extra to you.
Welcome to Making Movies with Garrett! Learn tricks of the trade, discover new gear, stay up with filmmaking trends, dive into how I pull off cinematic looks, and so much more.

[@siramods]

Important correction: to update firmware on the Receiver, the USB cable must NOT be connected. A Receiver without updated firmware connects to the Transmitter over Wifi, but will only show (in my case) a white screen with the Zhiyun logo. With the cable connection, the wifi sync does happen, so it's a mandatory first step, but in order for the app to show the Receiver update, the cable must be removed, and only the wifi connection must be active. Otherwise, fantastic video - helped me A LOT - but this small detail ruined me the best part of the day. Of course, I should have read the received manual better first. Cheers.

[@garrettsammons]

Pinned this comment. Thanks!

[@mikesuminski]

This is strange, because my reciever update was only shown in the app, when I connect it with the cable to the transmitter.

[@davemorgan2850]

i read this after i spent 30min trying to figure it out. I'm glad i saw it because to be honest i wasn't sure what it was i did differently to get it to work.

[@siramods]

​@@mikesuminski strange indeed. good to know

[@Patrick-jj5nh]

thank you this has been a huge help, for anyone on android i only managed to update firmware on an iphone.

[@pacoanselmi8886]

This is a masterpiece of review/tutorial

[@CSSC0der]

Agreed

[@garrettsammons]

Thank you!

[@vinzaputra]

the explanation is very clear

[@pastlifeliveinterviews9221]

i was thinking the same thing. ill start slow....

[@Greego]

Man, this is one of the best tutorials I have ever had the pleasure of viewing. I never subscribed to a channel as hard as I just subscribed to this one...your attention to detail and awareness of explaining detail that others do not even consider is impeccable. I think you should win an Emmy!

[@garrettsammons]

You’re too kind! Thanks so much

[@peterdepra]

Possibly the best scripted and best-presented video - on any topic - I have ever seen on KZbin. Excellent job, thank you.

[@peterdepra]

I cannot find any source to buy the receiver unit. Any ideas, please?

[@garrettsammons]

I use B&H here in the US

[@MichalOlender]

Garrett, you saved my life here! I'm on 5DM4 and the issue getting the transmission going was making me crazy. The right cables was the trick, something the company or other videos will not let you know. Thank you!

[@garrettsammons]

It drove me nuts until I figured out that USB deal. Definitely not intuitive.

[@colleenmeas1996]

You are one of the best and most informative creators on KZbin, no fluff or flexing, just easy to follow, no bs information in a visually pleasing format. Keep it up!

[@garrettsammons]

Thanks Colleen!

[@gillesmatheronpro]

Such a review ! I've seen a few (well, thousands... truly) and not even 15% are that sharp, concise, accurate, helpful, meaningful, etc. Great work, well done... folks at Zhiyun should offer you a round-the-World trip for your service and user-friendly attitude. And take exemple as well. Some other folks from other brands too (nobody's going to be surprise when reading this and some should agree with me). Customer services sometimes have such poor global quality of (non-)service, it makes you want to sit down and tell them : "OK, take back the device... I'm having some time on my own to shed those tears. Then I'll be calling my mom." lol

[@LorenzoHines.]

This was a quality video. Love your shots too, real clean... Very informational on this.. I have this gimbal and have had issues with the connection to the transmission module.. you may have resolved that issue with mentioning the usb port..(thanks for that).. Also, i think im going to pick up that wireless reciever and set as well. Such a great set-up. could see a lot of diff. uses out of that... not to mention looks pretty awesome as well.. Love the content!

[@garrettsammons]

Thanks Lorenzo! Yah man, that USB connector messed me up for awhile too. It’s such a solid setup! It works so flawlessly, just a couple of the initial understanding points aren’t super intuitive.

[@THEREALSRY]

Omg seeing you plug into the left side of the 3.0 just solved all my issues. You’re a legend

[@Chardhousemedia]

Boy, this is proving hard work to set up. I found that to get a picture on the monitor - once the transmitter/receiver are talking - you have to double tap the power button on the receiver to get the picture up or you just see the whie zhiyun screen. I've had no luck so far with the remote handle operating anything at all. I'm using the 3S by the way with the zoom/focus motors and the BMPCC 6k. I wish there were more troubleshooting videos for those for whom it doesn't seem to work straight out of the box!!!!

[@Jalbk]

Double tap the power button on the receiver to get the picture up... Thank You, thank you, thank you!!!

[@MAD_Media]

You don’t need to bypass the gimbal connection and launch from the transmitter app... I always follow these steps and works just fine for me every time: 1) Power on the Weebill-S 2) Power on the Image Transmission Module (default is 2.4G or last setting - quick press power button 3 times after powered on for 5G wifi) 3) Power on the camera 4) Launch ZY Play App, connect to gimbal - once connected it will automatically bring up the connect to Image Transmission Module That’s it!! You have camera control and video feed. 5G Wifi mode seems a little more stable and less lag.

[@garrettsammons]

Right on dude!

[@UTCM]

They ve told me it only connects to 5g . I ve tried on 2.4 for a couple days now wont connect

[@MAD_Media]

Unseen Thailand Chiang Mai - I had issues where my iPhone Xr would not connect in 2.4GHz WiFi unless I disabled Cellular Data, but even then I still had issues with laggy image feed, freezing, and losing connection all together... When I found out about 5GHz WiFi mode, I switched to that, and no problems since - remember, press the power button 3 times after it is powered on, the Green LED will flash intermittently 3 times to indicated 5GHz WiFi mode is now active - it will stay in 5GHz mode each time you power it up until you change it back

[@UTCM]

Thanks I ll try doing that and see how it works

[@UTCM]

I just tried it wont show in my wifi 2.4 only 5g it shows on my tablet the wont load zy play haha

[@garrettsammons]

TABLE OF CONTENTS Transmitter Setup 2:00 Focus Motor Setup 4:48 Transmitter Firmware 7:10 Receiver Pairing & Firmware 10:50 Receiver/Monitor Setup 13:21 Motion Sensor Remote Setup 18:35 Motion Sensor Remote Firmware 21:00

[@Engeyarrakazehbi3456]

Hee #Garret Sammons. does it works with the bmpcc 6k and the zhiyun crane 3s Pro. Please Let me know :)

[@ChadWatkins]

I’ve watched your video and I’m wondering will it transmit a red scarlet w signal to create a cheap follow focus system?

[@garrettsammons]

I think this won’t have a heavy enough payload for that camera rig. If the Scarlet has HDMI out, you could probably use it, though there are cheap wireless transmission systems that might perform better as standalone units.

[@garrettsammons]

This system I believe is weebill specific but I’m not sure.

[@goochthegrip]

does that same motion control unit work on the Crane 3? I'm trying to find out for certain but nothing I seem to find says or doesn't say definitively. Any info helps.

[@anthonyroberts9232]

😀 This definitely is cool as hell to buy and keep my gimbal updated to the max. Thank for posting your video, much appreciated because it's very informative education wise of what you actually can do.

[@wyoder9511]

I can not even begin to explain how amazing this video is. I never sub to people before I actually watch and enjoy their content for a while but this is the first video of yours I've watched and I'm subbed. This was amazing thank you

[@garrettsammons]

I’m honored! Thanks so much 🤙

[@AdventuresThings]

Dude I could have easily watched another 25 minutes of that. Great work on this.

[@Myck1977]

Best video of all Zhiyun's transmission! You are the best! Thanks for all!

[@btcmagazine.tech24]

Best guide I ever watched in my life

[@garrettsammons]

Thanks Leo!

[@btcmagazine.tech24]

@@garrettsammons one more simple question: can you pull the focus from this remote controller? I'm using Blackmagic pocket 4k and I don't want to pull the focus with this external focus puller... I mean.. you know there are some apps like Bluetooth+ that allows you to pull the focus without using this focus motor... My question is: can I pull the focus without using this external focus motor?

[@btcmagazine.tech24]

@@garrettsammons I'm talking about electronic lenses with focus motor!!

[@AnthonyDawsonPhoto]

Been looking at gimbals for a long time looking to do video projects. Think this may have sold me. Thanks for the informative break down!

[@garrettsammons]

Glad it was helpful!

[@FerrisFilms77]

Dude! Intense video! You are on another level to get this info in here so fast and smoothly. Nice work ! And thanks a ton!

[@natetheartist9]

Awesomeness.. I was caught between purchasing the Weebill S or the Moza Aircross 2. My concern is payload, functionality, and travel friendly. I was leaning more toward the Moza because of the wireless option offered. However after viewing your detailed video I had know idea the scalability gimbal has. Excellent options to expand film my film and photography needs. Thanks for taking time to create and share this ... I'm looking forward to seeing more. You've saved me time and money!

[@geekazoid]

You got my sub because I got more useful information from this video than every other Weebill S review. 25mins watched it all.

[@Hoffpauirdds]

Thank you so much for making this video. I am new to the whole cine world and I was super confused as to how to make this work correctly.

[@NatalBeatle20]

Not me with a Nikon D5200 not being able to use any of this but still enjoying the video lol. I just do everything manually with the gimbal controls and have to look at my live preview on my camera

[@tello_yo7546]

I just subscribed to your channel. by far, the best tutorial, very well explained with details i ever seen it so far.

[@Incacal71]

I didn’t know you can plug-in a micro USB cable to the multiUSB port on the transmitter. Thank you for that explanation! I was literally pulling my hair out trying to figure this out.

[@garrettsammons]

You and me both!

[@pepemlumbreras]

what a perfect video! I will take this to make my own camera crane!

[@garrettsammons]

Have fun!

[@YounusYousuf]

Thanks a lot Garret. Your tip for using micro usb over micro B port saved my day. No ! Saved my week. I was trying to setup 5d Mark 3 and 50mm lens on weebil s and it was nearly impossible to find mini usb to micro B connector. Before watching your video i was setting up with some OTG setup and finally when it comes to balance the setup for the last axis, the micro B big end was hitting on the gimbal. So i was thinking that these guys who made these gimbal probably never thought about these issue with image transmission module. Then I found your video.

[@garrettsammons]

So happy to help Younus!

[@burhankunda_]

This is one of the best detail video I ever see on KZbin......amazing stuff

[@garrettsammons]

Glad you liked it!

[@ubiFire]

This is EXACTLY what I was looking for. Thank you.

[@garrettsammons]

Glad it was helpful!

[@uniquesubjects]

Thank you for the detailed tutorial, this definitely made my setup process much easier and successful!

[@blackholemedia2014]

how is your latency?? mine is terrible. focus puller is very LATE with this transmitter and receiver.

[@uniquesubjects]

@@blackholemedia2014 It’s pretty good, I haven’t officially used it on a shoot but testing and getting familiar with it around the house seems to be working as it should. I was having issues with connecting my phone to the app but I think it was something I was doing wrong probably rushing. The last few times I was able to connect without issue.

[@blackholemedia2014]

The latency tho , the reaction time between you moving the camera and it moving on the receiving monitor. Mines is about 2sec which is TERRIBLE!

[@uniquesubjects]

@@blackholemedia2014 Wow yeah that’s Doo-Doo man! Mine isn’t like that. I’m just guessing but did you check, replace or have decent quality hdmi cables?

[@blackholemedia2014]

@@uniquesubjects yes updated firmware and fully changed . Still about 2sec late on the focus puller

[@ChrisWoodcox]

Great video G. Informative and well delivered. I've recently purchased the receiver to pair with the Weebill and my new Sony a6600. I'm quite excited to get the system up and running. Still waiting for the mini HDMI to arrive which will complete the connections. Fingers crossed. Thanks buddy.

[@garrettsammons]

Glad it was helpful!

[@MoorishMade]

Thank you Garret!

[@HardIsEasy]

Now this deserves some serious thanks! Would this be possible with Crane M3?

[@Kycade]

This was the most helpful video I’ve watched on this piece of equipment. Thanks.

[@garrettsammons]

Glad you found it helpful!

[@teilom.lwandeaj1947]

Sweet. Enjoyed watching your video n I “picked your brain” on a-lot of cool stuff.

[@Glen.Danielsen]

Outstanding and helpful video, Garrett! Thanks so much! 💛😎

[@garrettsammons]

You're so welcome Glen!

[@albertoflores3688]

Wow subscribed for the value provided

[@MohiniUfeli]

LOVE this video. Have subscribed. Looking forward to coming back after my transmission module's delivered. Thank you for creating! 💛

[@IslandFilmMaker]

Love this tech! Very complicated & I worry as there's a lot to go wrong to get this paired and working. It needs to be simplified, 'll wait for the next gen! Thx

[@garrettsammons]

You and me both!

[@thecreativelooksbymohan6785]

Thank You so Much for Making this video. Its Helps Really really a Lot.. Keep making such Videos, Will be waiting for the next videos. Thank You...

[@geekazoid]

Excellent demonstration and quick guide.

[@garrettsammons]

Glad it was helpful!

[@lp8102]

101 moving parts...dang. Alot going on...Great video

[@cinematographers]

Great tutorial! Just connected the Crane 3S. Everything works but the focus controller. Do you have any tip on that? Thanks!

[@MikiSimans]

Also having this issue!

[@fish00123]

Best Zhiyun tutorial! Thank you so much for your hard work!

[@garrettsammons]

Glad it was helpful!

[@PeterLindgren1]

Appreciate the video man, helped me get a hang of transmitter system. Haven't gotten it to work yet but i hope i will soon haha!

[@garrettsammons]

Let me know if you get it working. My issue was always with the USB connection cable not being the smaller one.

[@sierradaniels7072]

Hey thank you, I was really on the fence with this one!!! Gotta buy it now

[@garrettsammons]

Glad you found it helpful Sierra!

[@jdfpv1998]

Thanks a lot for the video. Way more understandable and well made than the offical Zhiyun videos! I juts got one question though - why is the receiver and the handle not available anymore and will it come back? I mean its nice to see the features but currently you cant buy those parts to complete your gimbal setup :/

[@TommyGunsDunleavy]

I would love to see how smooth some B roll clips look when shot remote with movement. Has me curious

[@waltertissen5910]

Thank you very much. Great Video.

[@Prolike136]

Love the quality of the video. Great explenation also. One Question: Can i pull focus from the phone?

[@garrettsammons]

You can! There’s a standard amount of latency for HDMI and WiFi, but it isn’t enough to be critical. That said, super fast motion and things would lag a bit.

[@najmi.d]

very great in-depth video. didnt notice it's 25 min long haha

[@didimiorios3781]

Just an extraordinary setup guide, thanks for share.

[@ConneryDavoodian]

thank you. amazing video

[@TomMariano69]

Garrett, can I transmit to a monitor and not our phone so the director can watch the filming?

[@olleriefilms]

How look like image quality?

[@mcbc5193]

EXCELLENT Review! Thank you! Smoooth, creative video and you offer excellent insight all around! Greatly appreciate it! All the best!

[@garrettsammons]

Appreciate the kind words!

[@mcbc5193]

@@garrettsammons Hey what's up Garrett, thanks for the great videos and tutorials, all around! A quick question on this setup for you --> Are you familiar if the wireless image transmission system would still work smoothly if the camera already has an external monitor directly mounted to the Weebill S, by chance? I currently have the Weebill S with a Ninja monitor connected to it. This is for recording along with a visual view while filming. Any idea if this would still work if I add the Image Transmission System with the remote attached to a second monitor? The goal would be to film with with a camera and monitor on the weebill s and then have a friend also viewing or adjusting the focus or angle from a transmission system and remote setup. Or possibly having the just the transmitter mounted to the camera and then use a cell phone to have a friend viewing the footage as its being recorded? Thanks for the insight!

[@johnny7166]

this setup is crazy, howver how many cameras are compatible with this complete setup.

[@ryanhines8966]

You... You made everything work. Thank you.

[@malitoff]

Hi Garrett, I took a quick look at your other videos, however I didnt see a Zhiyun transmount wireless image transmission 2.0 review, have you used/reviewed one ? If not what have you heard about this device :) Thanks Steve

[@drumndirty]

Great video! Any way we can access an option to send different resolutions to the iPhone for monitoring?

[@DronoTron]

This is great. Can you adjust focus from the app? Or you will need the remote for that?

[@taghappytv]

Nice breakdown / review. Best yet. Keep up the great work!!!

[@garrettsammons]

Thanks, will do!

[@johnnyray5515]

Hi Garrett. Great video. Thanks for making this. However, it seems the receiver is no longer available. Even on the Zhiyun website. Did they discontinue it? Do you have to have 2 transmitters now? Did they replace it with something else?

[@bosskaloi]

Does the remote has a joystick? So u can use it to control pan, tilt and roll of d gimbal if using it as right arm holder of a dual hand rig? And no need to move it around?

[@rathitthisarathulwan4812]

helpful video, Garrett! Thanks so much!

[@huntepr1]

I need this to work with a VR headset then I can look cool while recording basketball games.

[@norkin4life]

Thanks for being so detailed

[@LazarSoljaga]

You are using the exact video monitor i was planing on getting. If i where to use a cage for the monitor would the Video transmittor be able to screw in. Witch cage would accept the transmittor with out having to use your mounting method

[@just-felix4766]

Me: sees intro Also me: Like

[@etchd_]

Amazing work mate! So detailed and clear!

[@garrettsammons]

Glad you found it helpful!

[@davemorgan2850]

Right! I'm on the program now. Got the motion sensor remote. Just need to figure a way to keep the remote and receiver charged all day. Is there any way to keep the remote charging via powerbank while in use? It looks like the only way to charge it is the same port that needs to be used to connect it to the receiver. Perhaps a split cable could be used to connect the remote to the receiver and also to a powerbank? Amazing video by the way. Has helped me get this thing working exactly as intended. There are just so many things to keep charged on a full day shoot. If you have any tips for this i'd love to hear them.

[@BudieyChannel]

Perfect, Thank you

[@garrettsammons]

You're welcome!

[@terryfletchermedia946]

Exactly what I've been looking for an more! Thank you

[@Utsab_Giri]

Thank you for making this video! How do I get Object/Face Tracking? I have a Crane 3S. Thanks!

[@AnimusNitra-X]

Is there a stick for crane without sensor moving for controlling it by the cameraman himself with a joystick?

[@tomliddell8487]

Hey Garrett, awesome video. Just wondering do you have to use the specific zhiyun transmitter and receiver for the motion control to work? Thanks

[@eduardoherrera2487]

good after friend, first of all I would like to thank you for such great videos you put out on your Chanel, specially the one of how to set up the Zhiyun gimbal. I purchased the Crane 3S pro kit a few days ago but unfortunately I haven't been able to find the wireless receiver. By any change do you know where can I find it. I would like to add it to my new set up but amazon is not selling it anymore or B&H. I will appreciate if you could guide me to where I could purchase it. Thank you. Keep up the good work.

[@guitou]

Fantastic Sharing~~~~ very detail and very informative!! Great!! and keep it up!

[@garrettsammons]

Thank you! Cheers!

[@TitanEntertainmentvideo]

Will it work if there is no internet connection? There are many times we shoot in remote locations with no internet.

[@AllAmericanImages]

Great video, any idea if the Crane 3S with wireless transmitter can be connected to a Canon C3000 Mark II

[@squirrelmusic8909]

awesome video, so much so I bought the whole secondary setup for remote focus, pan etc. Quick question though, I didn't see the cables that were used to connect the zhiyun receiver to the feelword f6plus and I assume the second cable is micro USB to micro USB to connect the receiver to the remote? Any help from anyone would be appreciated :)

[@hafidhhh]

Hey man! super helpful video, you're way underrated! btw 12:30 so the Receiver and the Transmitter here is an exactly same unit, right?

[@garrettsammons]

They look nearly identical, but the transmitter and receivers are different units in function.

[@Nickporter17]

Awesome and helpful video! But I have a problem, can you please help? My camera display goes black when the image transmission module is connected and the camera is set to manual photo. My camera is a Sony a7iii. I'm shooting photos in a studio on a tripod and using the transmission module as a standalone without the gimbal.

[@Dogtops]

Has anyone had any issue of the pan really slowly drifting ( camera right, in my case) when the remote handle is engaged in motion control?!? It starts a creeping drift to the right as soon as I engage the switch or as soon as I stop the camera move. I was also noticing that when I stop it has a very slight (but perceptible) "nudge" back in the opposite direction after a camera move. Is it a matter of tweaking the motor settings(on the 3S)??? Very informative vid Garrett! I do however, wish you would have mentioned the double click on the receiver to get an image (would have saved me a few more hours down this setup/hair pulling rabbit hole!!). Many thanks!!!

[@burak.zeybek]

hi , awesome review.. I have a question. I couldn't see zhiyun in my mobile phone wifi list.. Why could it be happen ?

[@matiasgiuttari4938]

Very good video!! I bought this same gimbal for my Sony a7iii. I can't manage to take photos, film, control the ISO... like you do in the video. I'm sure it's not a problem with the gimbal, it's probably some configuration of the camera that I have to change. Do you have any idea what it could be? How can I solve that?

[@squirrelmusic8909]

did you get this solved mate? My setup is mostly workingl, but I can't get focusand ISO not working from the remote control, while zoom is. On my weebill S gimbal, I can't see ISO or F stop.. focus is working from the gimbal wheel

[@UKStormChaser]

Brilliant review mate. I wonder how well the motion control setup would work for filming an airshow? What you rekon? 🤔

[@In3briant]

Canon SL 1,2 & 3 plugs are on the opposite side which sucks bc it won’t reach and I used different cables and they are in the way, just so people know before they buy if they have ports on opposite side

[@PassionCentreCanada]

Can I connect the receiver to a blackmagic ATEM and get a clean hdmi output for streaming?

[@daracho5922]

i also want to know this

[@garrettsammons]

Absolutely you can. It would work like any other input system. The Hollyland Mars 400S Pro is a wireless transmitted literally built for live streaming. I did a video on that one here: kzbin.info/www/bejne/fqSohnSigd6VZ9k

[@marinakalashnikova5212]

Hi. So what if one film director or the key camera man is in another city, could they control the device from there through their iPad and actually start recording and taking a picture from there?

[@Mavan0]

Is there a way to make this a live streaming rig?

[@nomad0714]

Hi Garrett, Great video! Very informative as I have yet to see a complete review of the entire wireless transmission kit + remote. I guess the receiver + remote just recently came out. My Weebill S pro package + rec + remote is on order so looking forward to putting it to its paces. Some questions: 1) can the wireless kit work with other gimbals (say Ronin S) setup or only on S gimbal; 2) conversely I saw your Hollyland 400s and wondered if I could use S gimbal + remote + 400s; 3) does object tracking work well and with using the transmitter app Thanks in advance!

[@garrettsammons]

Happy to help! The transmitter and receiver will work for monitoring only when using it on other gimbals or applications. Camera control and motion control are unique to the Weebill-S system. I’d imagine it’s because the transmitter communicates directly with their gimbal so it can’t talk to others. The 400S works beautifully with the ronin, but you still won’t have any motion control from Zhiyun’s remote. The object tracking works amazingly as long as you don’t lose site of the object (wall, tree, etc.) Hope this helps!

[@faroukzanou7242]

yeah kinda have similar questions but will like to also know if there are any other setup means of transmission to phone or specifically to record 10 bit externally to ninja v with a canon eos r... keep up the good work.

[@garrettsammons]

Hi Farouk! With Zhiyun’s image transmission system you can connect two smart devices (phones or tablets) via WiFi and the receiver module simultaneously. Those are the only options for their system. I don’t know of any wireless system that would transmit a 10bit signal with high enough bitrate to be recorded via a field recorder with any integrity. I think you need to hardwire any recorder to the camera to get the quality you’re looking for.

[@nomad0714]

Hi Garrett, Awesome! Thank you for your quick reply. Super clear. As what you described, mutually inclusive to Weebill S is the camera and motion control. And mutually exclusive is the transmission kit. That is fair and good to know as with the transmission being able to use on say Ronin S, I can use the app to control it away from the gimbal. Same with Jibone and sliders, I can be away from the gears with my monitors and phone (for viewing) and still control them with app. More controls and ways to create. Appreciate it!

[@gereral1_jackofalltrades]

Does receiver output 422 10bit so you can record to ninja atomos recorder?

[@newsmediachannel2018]

Hi my name is LOOCKSON First of all I great you for this video , I leaned a lot from you . Thank you 🙏 My question is , if I have a ZHIYUN CRANE 3 LAB Do you think the TransMount Motion Sensor gonna work on it please ? Thank you .

[@infinityphotorob]

I just set this up and my pan does not seem to be moving more than a few degrees. What am I missing? It has to be something easy.

[@pablovi77]

Thanks for the video! Can you connect more than one cellphone at the time? I mean, I can operate with one and the director can watch with another?

[@maxheadrom3088]

Very detailed video! I hope now people know how important firmware update is! One question: how many can I have running at once connected to the same Cell Phone? Thanks!

[@andreschwarzkopf1994]

same :D how much output

[@jackmerrick78]

can you not connect the phone as a monitor even without the transmitter?

[@mikaelpeltola9018]

Great video! I have a problem with the Transmitter...The image in the ZY App is unsharp even though you pull a perfect focus (I have a Eos 70d and a Iphone 11 pro max). The recording is sharp and nice but looking in the app everything looks slightly off focus. Anyone else had the same issue? If yes how did you solve it? Cheers

[@bradlywright5189]

Would this work taking photo's if needed?

[@apropervillain]

I am slowly working my way to that entire set-up...for no other purpose past pure want. This has become my middle age hobby. I can't afford the sports car! lol