The CRT SS-7900V Radio , Introduction to Service Menu and Channel Modification

Tune up Report for Luther in TN on DATE 1-23-24
In this video I demonstrate the following for the CRT-7900V.
🔴OEM power output
🔴Tuned Output
🔴11 Meter mod
🔴 Service menu
This works with the Anytone AT-5555N as well. I also show how the inside looks like a Stryker SR-955HPC V2 radio and the internal software runs the same "Debug" features.
--- Tested the electret stock microphone 🎤
www.bellscb.com
To BUY a radio like this:
www.bellscb.com/products/tenm...
𝗖𝗵𝗮𝗽𝘁𝗲𝗿𝘀
00:00 - *** 𝙄͟𝙣͟𝙩͟𝙧͟𝙤͟𝙙͟𝙪͟𝙘͟𝙩͟𝙞͟𝙤͟𝙣͟ ***
00:47 OEM Power Demo
01:25 11 Meter Modification
01:37 11 Meter power check
01:54 SERVICE Menu Access
03:13 Discussion of how great the S-Meter Calibration is
04:27 Show similarities to the Stryker SR-955
04:38 Show the output after Tune-up
05:39 Conclusion
🔴 Screwdriver’s comments
------------------(◣_◢)-----------------
Thank you for watching. Please Subscribe to my channel to see more videos.
Click the 🔔 “BELL” for Email Notification.
Remember to click the "notify bell" to receive
notices when I post new material. You don't
get notified by just subscribing, you have to click
the BELL to get emails when we post a new video.
That's just how KZbin does it.
DON'T MISS ANOTHER VIDEO: Follow these steps
⏵1. Visit my channel page ( / bellscb1 )
⏵2. If you're not subscribed, click the Subscribe button.
⏵3. Click the bell icon. 🔔 (so important)
⏵4. A dialogue box will appear, allowing you to select to
receive 𝗔𝗟𝗟 notifications.
Did you like my video? .... Please click 👍 LIKE and comment.
Did you hate my video? .... Please click the 👎 DISLIKE and 𝙋𝙊𝙎𝙏 𝘼
𝘾𝙊𝙈𝙈𝙀𝙉𝙏 telling me what you did not like.
Your comment means so much to help me do
better.
Please remember, this is for giving a vote on
my VIDEO - NOT the radio. If you don't like the
radio, please don't dislike my video.
● Website: www.bellscb.com
● Subscribe to our KZbin channel: / bellscb1
● Like Us on Facebook: / bellscb
● Contact us: [e-mail]
Disclaimer : The information contained on the video is for general information purposes only. Bells CB LLC assumes no responsibility for errors or omissions in the contents of the video. In no event shall Bells CB LLC be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, negligence or other tort, arising out of or in connection with the use of this video or the contents of the video.
Bells CB LLC reserves the right to make additions, deletions, or modifications to the contents of the video at any time without prior notice.
IF for ANY reason you feel this video violates your rights, inform us immediately at "[e-mail]" and the video will be removed until the issue is resolved, or deleted permanently if necessary.
© 2022 Bells CB LLC
All Rights Reserved.
𝅘𝅥𝅯 Music by :
Technology Calm Logo 02 by TaigaSoundProd®
Link: www.filmmusic.iosong6670-technology-calm-logo-02
License: www.filmmusic.iostandard-license
📽️ Video Processing and editing:
𝑺𝒄𝒓𝒆𝒘𝒅𝒓𝒊𝒗𝒆𝒓
Bells CB LLC ®
www.BellsCB.com
Serial Number 22120278

[@bblod4896]

I am waiting for a setup routine where you have to press eleven buttons simultaneously to enter the service mode. 😂

[@jasonfrye6473]

Great video and informative, to many people get wrapped up in the name of the radio not realizing that a lot are the same main boards in different boxes with hundreds of dollars in price difference

[@mycatkramer]

Great Job Carl !! Keep up the great work! Thank you for all you do

[@scotthansen429]

Ready for More videos

[@Tinman386wisconsin]

Awesome info! I myself will always stay out of that menu. But you know dang well most these guys are going to be too cheap and proud to send it in and their going to go into that menu now. 😂😂😂😂😂😂

[@bluehappyscrap]

AWESOME!!!🌍💯

[@SDS-1]

I do like the video 💘

[@ironhead320]

Nice

[@mikelee9149]

The lowest frequency on my SS7900 is 25.615, is that about right?

[@christophersmith1155]

ANYTONE 5555 / RADIODITTY QT-60 / CRT SS 7900 are the same radios from Quanzhou.

[@miker8379]

Correction. You forgot the n after 5555. 5555 is a different radio

[@christophersmith1155]

YUP-N

[@Team-fabulous]

When keying the mic on mine the TX power reading on the radios meter is low.. About half scale.. Needs adjusting I think.. Is it in the service menu please

[@franciscolopez3229]

Hello sir, I do have the Anytone AT5555N. My question is, the AM deadkey only goes down to as low as 3 watts and it's overdriving my BJ-300 because when I modulate my power meter dips down so is my ameter on my power supply. Please correct me sir. Can I turn down the deadkey inside the radio to at least 2 watts?

[@BellsCB]

You can turn it down in the service menu from front panel. Follow the steps I show in the video, and when your in the service menu, rotate the channel selector to select "AMPOWL" on the display, then hold down the key on the mic and rotate the channel selector to turn down AM power in low. 𝑺𝒄𝒓𝒆𝒘𝒅𝒓𝒊𝒗𝒆𝒓 𝘽𝙚𝙡𝙡𝙨 🔔 𝘾𝘽

[@OFFICALVA3DLO]

HI I NEED A CB MC A OLD 1967 AMPNEAL CONECTOR ... I RUN COBRA CAM 88 CB NEED A MIC THAT THE D AMPNEL CONECTOR CAN YOU DO UP A AMPENL MIC CONNECTOR? NEED A MIC WORED UP FOR MY COBRA CAM 88..... GET BACK T ME THANKS

[@cwhitewelding9984]

how much for this tuned up, was gonna pick up a anytone 6666 for the jeep. cant wait to get my 99n4 back from you.

[@BellsCB]

$329 free shipping www.bellscb.com/products/tenmeter/PNI/CRT_SS-7900V.htm

[@aerovideos]

Bonjour , J'hésite avec la président George II... Avez vous un avis entre ces 2 radios ? Merci

[@BellsCB]

Le Président George II est une belle radio mais vient derrière celle-ci de loin... Celle-ci fait bien mieux à bien des égards.

[@user-hs3zm2rx6h]

RS12 = S9+60