The easiest way to pull a Cummins?

[@steveDIY]

Just pulled 2 Cummins engines out of 2 separate 2012 rams. I removed everything off the front of the trucks, almost everything off the front of the engine including fan. I moved the ac compressor off the engine and pushed it to the side I took the power steering pump off and pushed it to the side and left those in the engine bay. Disconnect all the wiring and pushed it to the side, I left the starter cables connected to the starter and the block since it’s a pain to get those off. I took the valve cover off. Disconnected tranny bolts and torque converter bolts I chose to loosen the engine mount bolts, lift the engine up a little to take the weight off and then I took the mounts off completely. I took all the oil pan bolts off dropped the pan I then pulled the engine forward and up enough where I could disconnect the lift tube from the oil pan. Then pulled it straight out