The EASIEST Way To Solve the 3x3 Rubik's Cube! - Beginners Method Tutorial

[@NathanHuang-t8f]

This video does not have enough views, by far one of the best tutorials for solving a first 3x3 cube. Thank you for explaining your method thoroughly :)

[@ScoochCubing]

@@NathanHuang-t8f thanks so much! Glad I could help 🙂

[@BenTheCuber]

Keep it up!

[@ScoochCubing]

Thank you!!

[@EFFORTLESSCUBER]

I know CFOP though watching but it is very nice begginer tutorial i will give it as a reference to my friends as they may learn

[@ScoochCubing]

Thank you!! 😊

[@audreyfarrugia9555]

😅

[@Nicnortonguitar]

This is a great way to solve the cube ! I love the uniqueness at the end where you turn the cube over to finish the solve

[@pugsie1303]

How do you slove the white side slow down a bit and not easy

[@ScoochCubing]

I explain it quite slowly starting from 2:13

[@Itsvexplays]

Thank you so much at first it was really because someone twisted a corner so I couldn’t solve it but now I can thanks you so much

[@vfgt54erfgt54]

heh pretty confused with position yellow corners one, any nhelp?

[@ScoochCubing]

Hey sorry I just saw this. So yeah step 7 takes a bit of getting used to. After solving the yellow edges, you look at the yellow corners and see which ones are in their correct spot. ‘Correct spot’ doesn’t specifically mean the corner is completely solved (although it could be), but it usually means it’s in the right spot but twisted. For example, if the corner with yellow, red and blue is between the yellow, red and blue sides, that means it’s in the correct spot. You hold the cube so that the corner in the correct spot is on your right, then do the algorithm (once or twice, it depends) until the rest of the corners are in the correct spot. If you get to the step and there are no correct corners, do the algorithm from anywhere and that would make one of the corners be correct. And you can carry on normally

[@st4rry_the_star]

i need help when he gets to the middle layer part i get confused i need a tutorial because i get confused on where it needs to go left or right and also confused on the last part with yellow i watched the whole video and when i do the algorithm it just goes back to the same

[@ScoochCubing]

@@st4rry_the_star to see if the edge piece goes left or right, you find the edge piece on the top layer and match its side colour to the centre Then, look at the top colour of the edge piece. See if that matches the centre piece on the left side or the right side. Then you turn it away from that side and so on

[@st4rry_the_star]

@@ScoochCubingi rewatched the video i i figured out how to do it but still stuck on that last yellow part

[@ScoochCubing]

@@st4rry_the_star for step 8? What part are you stuck on

[@st4rry_the_star]

@@ScoochCubingafter you do the cross im stuck on the corners

[@ScoochCubing]

@@st4rry_the_star for step 7, maybe try think of it as looking for a ‘twisted’ corner. So a corner that would be solved if you were to just twist it in its place. For example at 10:18 the yellow-green-orange corner is twisted. Then you hold that on the top right and do the algorithm Sometimes there’s no twisted corner, so you just do the algorithm from anywhere and you will then have a twisted corner

[@mikucube]

i already learn how and average 15 but still watch to support you :D PIN THIS LOL

[@ScoochCubing]

thank you but smh

[@ripgaming986]

great video! just one question though how do you know which way it needs to go on step 4 the middle layer? :)

[@ScoochCubing]

When you have the edge (any edge that doesn’t have yellow on it) on the top layer, you match the side colour to its centre. So the first example I show at 5:57, the colour on the edge facing out is orange, so you move the top layer until it connects to the orange centre. Then, you look at the top colour of the edge (which is green in that case), and then you do the algorithm I showed. The first move will always be moving the edge away from where it needs to go (away from green side in that example)

[@ripgaming986]

thank you so much this comment really helped! great tutorial and i can now solve a rubix cube!

[@Luchroma]

OMG GOOD TUTORIAL I GOT THIS RIGHT AWAY

[@YhunileUni]

Thank you very much bro I learn it in 20 minutes you explain nicely

[@GP-jh4wp]

Very well made video, great at explaining each step... I solved the cube (beginner method) watching and practicing each step a few times.

[@ScoochCubing]

Thanks! Glad it helped

[@BelgoonGamer]

@@ScoochCubingpls I beg you to do it on the paper🥺🙏

[@BelgoonGamer]

@@ScoochCubingpls do it on paper maybe I’ll learn it…🥺🙏

[@ScoochCubing]

@@BelgoonGamer I’m not sure how that would help too much? Also I think it would be better if you make your own notes if you want it on paper

[@farahahmed3979]

I will now follow you cubehead is a good KZbinr and it took me 5 days to do his method but it took me about 25 minutes to solve it doing this way, thank you, im not saying cubehead is bad, but you deserve more subscribers because this is super awesome!

[@DanielGvenetadze2012]

I watched this video and immediately solved the cube. absolutely amazing and thank you!

[@muhamadsyakir3930]

I use this method and that's work efficiently 👍

[@audreyfarrugia9555]

😊

[@fortniterules123]

Does it matter if when making a raise there is an extra white corner piece on the daisy

[@ScoochCubing]

No it doesn’t matter, for now while doing the daisy and white cross you can ignore the white corners

[@ZaireYounessKhalid]

TYSM bro you deserve a subscribe for that TYSM

[@ScoochCubing]

Thanks! And no problem

[@BelgoonGamer]

@@ScoochCubingpls do it on the paper🥺🥺🥺🥺🥺🥺🥺🥺🥺🥺🙏

[@kenneththekinggammer5744]

Awesome explanation thanks so much bro because of you I I learnt to do it in 1 hour

[@mm.misterminecraftandtroll7822]

Brother can u be my tutor i dont understand the second abd third and white corners

[@ScoochCubing]

What part of the video is it?

[@BKTS1]

I have been watching so many famous cubers try to teach this method then I came past your video and I actually solved my cube . Thank You So Much 😀😀😀😀

[@ScoochCubing]

@@BKTS1 thanks!! Very glad to help

[@BelgoonGamer]

@@ScoochCubingpls do it on paper I can’t learn this🥺🙏

[@BelgoonGamer]

@@ScoochCubingpls answer me🥺

[@roccososic1737]

Yoo bro i just want to know what the cube u were using is called and the price bc i have a crappy ass cube

[@BrookePezdirtz]

It’s so good I love it so much😊

[@CheeseringTV]

As a 9yr old im confused at the 8th step because my middle layer move after doing the algorithm and also after my yellow is complete my white is not solve.can u pls make video explaining the 8th step for me thank u :)

[@ScoochCubing]

The middle layer messing up is normal, it should fix itself when you’re done solving the corners. I think the most common mistake is just doing the algorithm as ‘R U R’ and forgetting the last U to the right. You need to do that move even just after you solve the yellow corner. If you forget that last move anywhere in the step then it would mess the cube up

[@MigeouGamer823]

Thanks bro I learnt how to do it in 2 days❤❤

[@MrCardozfrank]

Great I learned in 10 minutes 😊

Thank you so much! this is the first video that actually worked!

[@SomebozoIGuess]

Me who learned to do it in 2 hours:

[@Thebackdreamer]

me who learned to do it in 45 minutes

[@vlr5549]

Bro I got it in 2 weeks 😭

[@tjsebastian4466]

I can finally solve my Rubik's cubes 😊😊

[@Amanda-iu8be]

What happens if you start with a c after you finish the middle layers

[@hithascreation1597]

Thank you so much i watched more then 10 video but dint find one which i s as good as you

[@ScoochCubing]

No problem :) glad to help

[@peytonabraham6210]

what rubiks cube do you use

[@SamanthaMalizia]

bro this is the best most easy to follow tutorial thank YOU so much

[@sebastiengenet6287]

How do you do the white corners without the white cross moving?

[@Slenderbros4]

after three days i got this, thank you

[@emc1929]

how do I make my daisy???

[@ScoochCubing]

I explain it at 2:15, is there any specific case you’re stuck with?

[@chellesEDITS]

something i do that helps easily is i learned the method of how to solve one side and its really easy then i use that to make the daisy

[@gauthamgopinath3362]

Great video! I will recommend this video to anyone interested in learning how to solve the cube.

[@ScoochCubing]

Thank you!!

[@wge322]

Thank you so much! This is the actual first tutorial that actually helped me solved my first Rubik cube. Now I can solve one on my own!

[@ScoochCubing]

You’re welcome! Glad I can help :)

[@BelgoonGamer]

@@ScoochCubingPls do it on the paper🥺🙏

[@Rio-Ney]

Ty sm i was struggling at first with some of the tutorials i watched but yours was simple and well explained i solved it in a matter of 2 days

[@ScoochCubing]

Thanks! Very glad to help

[@bigdogbreedtrainer6936]

Thank you so much! i watched this video 2 times and unbelievably, i was finally able to solve it in under 3 minutes! i shared this video to my friends and i am respectfully requesting for a video where you can be able to solve a rubiks cube in under 30 seconds? it’s really difficult since no other youtube videos worked for me but this video personally did effectively! I feel like you can help many other people know and learn to master how to solve a rubiks cube in 30 seconds or less because of your comprehensible video.

[@ScoochCubing]

Thank you! Very glad to help :) I actually have a video on tips to become sub 1 minute. These are kind of the basics for sub 30 seconds, so I think it’s a good place to start At the end I also give an introduction to F2L, an intermediate method for the middle layer that is great to start learning for the long run ‘4 Look Last Layer’ is also a great method for the last layer to become sub 30, I don’t have a video on it but there’s lots of videos out there My vid: kzbin.info/www/bejne/Zomwn4eBiap_eNUsi=JGdFhXmxp89KBKuO

[@bigdogbreedtrainer6936]

@@ScoochCubing The video quite helped me, my average became 1:30 seconds and i aim to do it under a minute, but the thing is other youtubers just don’t really help because their explanations aren’t clear so i couldn’t understand oll and pll. or maybe i have to buy another cube, or study the mechanics. Btw, which cube you’d recommend to buy? Again, thanks for the great video.

[@BelgoonGamer]

@@ScoochCubingpls do it on paper how many times I have to tell you 🥺🙏

[@cubingwithjenric5529]

Nice I knew it was gonna be a rubix cube video

[@ScoochCubing]

You’re a mind reader

[@cubingwithjenric5529]

@Ervin the cuber no bro its rubix

[@cubingwithjenric5529]

@Ervin the cuber btw, I only said rubix because it's a joke. In scooch's discord server, he was asking "do you guys know what my next video is" or something along those lines. I said "oh its probably going to be about rubix cubes" as a joke. That is the reason why I commented "I knew it was going to be a rubix cube video".

[@cubemaster7583]

Amazing job

[@thuiyacharles2774]

Thankyou very much i did it in 14 minutes thankyou

[@cbletl1996]

I dont understand the point of step 1. Wouldnt it be easier to just do the white-side cross right away instead of making it on the yellow face and then moving it. I get that it would make it easier to find the other edge color to match it with the centers, but the cross isn't difficult enough to need step 1.

[@ScoochCubing]

Yeah you’re kind of right, out of all the steps the first step is the easiest to skip. But the point of this video was to give the absolute easiest way to solve the cube. For a beginner, doing white cross straight away is harder than doing a daisy first. But I see where you’re coming from :)

[@PROJECTIMAGINE-i5s]

But your good at this both teaching and solving

[@SandeepKumar-wi2we]

BRO HOW DO YOU SOLVE THE YELLOW CORNERS OF CUBE?!

[@ScoochCubing]

I start explaining it at 10:15. Is there anything specific that you’re stuck on?

[@anitanirmal27]

nice one! this is soo damn good! really easy and understandable! :D

[@ScoochCubing]

Thank you!!

[@AsdJkl-rw9jq]

I will make in 48 sec bro I love it

[@aloketalukdar9951]

very nice video I solved my cube

[@kiogoramuriuki5033]

who taught you

[@ScoochCubing]

My brother first taught me a long time ago, but I forgot for a while and re-learnt with youtube (can't remember which video but it was probably jperm)

[@Zuri_RobloxSlayy]

I have problems with step 3 what if u can't find perfect white corner

[@imamrnoah7412]

I litterally tried 5 tutorials and almost gave up but yours was the only one who helped me thanks lol 😎

[@ScoochCubing]

@@imamrnoah7412 haha thanks! Very glad to help

[@ProphetJohnson]

It’s workedddd!!!!!! I sovled it I’ll practice thanks

[@litsgaming6404]

I’m still working on it thank you

[@Ralphispro]

tysm bro I learned how to do it in 1h

[@JehodonKavira]

why do my bottom corners not get solved after doing the daisy

[@KatiMcNicholas]

I don't know how to do the F2l, can you teach me please?

[@karthikgaming4341]

Mr scooch by far this the BEST tutorial for me I checked many tutorials but this the best 👍 . Love from India

[@ScoochCubing]

@@karthikgaming4341 thanks!! Glad I could help :)

[@ShambhaviSinha-zs4qn]

how do you do it

[@orangestripes_yt124]

BEST TUTORIAL SO FAR I watched all the tutorials and none of them actually worked unlike this one, this vid is highly recommended

[@ScoochCubing]

@@orangestripes_yt124 thanks! Glad to help

[@orangestripes_yt124]

@@ScoochCubing YO YOUR THE GOAT OF CUBING Im have a little problem doing the last step can you help me

[@ScoochCubing]

​@@orangestripes_yt124 Something a lot of people mess up is forgetting to do the last move of the algorithm (top anticlockwise) when a corner gets solved, maybe that's the problem?

[@Alien105x]

Pro I bought the cube a month ago. Couldn't do it. Watched this video for 10 times in 2 days and did it. Thanks pro​@@ScoochCubing

[@Princessprisha_skz]

I keep trying to do the middle layer but keep messing it up 😭

[@cbletl1996]

If you do the first two layers together (F2L, top corners and middle edges at the same time) you can do it entirely intuitively. It'll take you a while probably, but you don't need to memorize or look up algorithms to do it.

[@Princessprisha_skz]

@@cbletl1996 um ok thanks but i dont rlly get the algorithms that have numbers and letters 😅

[@Do-doom]

i have one corner unsolved and the way you said didnt work

[@ScoochCubing]

@@Do-doom you have one corner unsolved on the whole cube? That means you have a ‘corner twist’, which makes the cube impossible to solve. So you have to physically twist the corner to make the cube solvable again

[@Do-doom]

@@ScoochCubing oh…

[@aaronmuli1496]

How do you make the white cross ❌

[@MohammedRafan-sg9ml]

bro hearted everyones comment but not me🤣EDIT:i saw this was 3 years ago and can you pin and heart scooch cubing

[@MohammedRafan-sg9ml]

my cube is

[@alikhokhar8532]

Could you please try the moyu weilong wrm? its a very good cube and you might like it!

[@NotmeK-yg3zv]

Ty bro

[@VINCEDANIELTrinidad]

I can only solve the white one how to do the others?

[@DEVIL_MEYT29]

Bro ive had this cube for 2 years and i solved it for the first time

[@MCSTRANGER7]

Thank yiuuuuuy sooooo muchhhh

[@creatureonhacksx6703]

have u tried a rubic cube art

[@trashmansam20]

Good vid

[@ScoochCubing]

@@trashmansam20 Thanks :)

[@hrridyo]

I literally watched approximately 8 tutorials and i cant solve it. Hopefully i can solve it after watching this tutorial

[@AyishaZafar-fi8qr]

I am still confused

[@AyishaZafar-fi8qr]

G gesdhbc

[@AyishaZafar-fi8qr]

Bruh

[@aaronandayraofficialchannel]

The tutorial is really good but im still learning on how to get the f2l more easier cuz if i do the simple algorithm it messed up

[@cheeseburger5716]

Cool video

[@ScoochCubing]

thank you :)

[@Foolsteam7125]

it helped

[@Slipknotfannnn]

When I get my white cross the bottom layer isn't finished

[@azrulhidayat007]

Nice, love from Indonesia 🇮🇩🙂🙂🙂

[@ScoochCubing]

Thank you!

[@sheeplegend1324]

indonesia? Intresting..

[@FFLOVERS79]

VERY NICE WOOW GOOD VIDEO IT WAS AMAZING I FROM P.K REALLY WOW

[@shyam6225]

nice video

[@ScoochCubing]

Thank you!

[@sridevivpuram1662]

Excellent

[@cubingdark5041]

Me who knows cfop & average sub 20....I should watch this😂✌️

[@ScoochCubing]

Hahahah

[@dld5055]

I dont understand how to do the white cross. My colours dont match up😢

[@Foolsteam7125]

thanks

[@LastGuestRemaining-prime]

Question so at step yellow edges my corners are ALL in the wrong place even doing the algorithms are still not working do i need to repeat them or scramble and do over again Edit:OMGGGGG THANK YOU SO MUCH BRO TH- I SOLVED IT IN 1 DAY

[@ScoochCubing]

Haha no problem glad you solved it :)

[@LastGuestRemaining-prime]

@@ScoochCubing i sended my friends this vid and in somehow they learned it in 30 min

[@ScoochCubing]

@@LastGuestRemaining-prime wow that’s impressive 😂 I’m very happy to help!

[@LastGuestRemaining-prime]

@@ScoochCubing yeah hes a fast learner

[@MatthewHlondo]

I cant solve because when i solve the white the other colours are not in shape

[@betinakalo9441]

You are better at this ❤😊

[@shid7128]

Nice love from my sister

[@F2bro-i4g]

Bro in step 6 how to solve the another case UPDATE: i solved my cube for the first time 🎉🎉🎉🎉

[@ScoochCubing]

Those are actually all the cases you can get. You can just turn the top layer until you get one of them

[@F2bro-i4g]

@@ScoochCubing ok

[@hridyanshugamer6931]

Thank you now I am not jealous of my friends😅

[@KariPacker]

you need to actually explain things not just say “do the corners”

[@ScoochCubing]

@@KariPacker yeah haha I do an example solve, then afterwards I take you through the steps

[@cbletl1996]

What are you talking about? He said solve the corners during the actual tutorial part.

[@KariPacker]

@@ScoochCubing thanks 😊

[@memo.tazzz2727]

It’s too hard you need to slow the cube down and show all possible edge positions well done and keep it up

[@ronneyz]

❤❤❤❤❤❤ thanks soooo much

[@nikkihagen8462]

Thank you

[@MeetAgarwal-f2w]

Can’t put the yellow corners on the right side in step 7

[@wintersparkMc]

Ive been cubing for 2ys and could not do it' this vid been calling my name

[@wintersparkMc]

I took notes and came back after 2 weeks of commenting this and I can do 1m solves now I wanted to improve my f2l so I came and it worked very good scoochhhhhhh

[@Kate-u9r]

Where it needs to go as in

[@Gsxgamier]

Ty so much some kids were insulting me that i dont know how to solve a rubix cube... now im better than them😂

[@sim4584]

bro i don t understand your are doing step can you make another video for me step by step for me because want im solving the another are geting destroying so can you please please i will subcribe

[@emmycheruto7065]

I'm now getting it

[@cubersquad]

Finally a video for non cubers like me. Ha ha jk

[@ScoochCubing]

Lol

[@cubersquad]

@@ScoochCubing he he