The EASY 3X3 PISTON DOOR! [Minecraft Bedrock 1.20] Tutorial

Today I'm Showing YOU How to make this EASY 3X3 Piston Door for Minecraft Bedrock! This works in 1.20 and All the Latest Versions of Bedrock Including: Xbox, PlayStation, Windows 10, PE and Switch!
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
▶️-MAIN CHANNEL: @TomcoMC
🗣- DISCORD: Come hang out. / discord
🐦- TWITTER: / tomcoyt
🎶- TIK TOK: / tomcomc
#minecraft #redstone #door

[@TomcoTwo]

UPDATE: This still works in the latest versions of bedrock, I've had a few comments saying it doesnt which scared me a little but ive just checked it now and its working fine 👍

[@USureAbtThat]

Hey so whenever I use a level as an input it works, but when I changed the input to a torch key (so I could hide it) along with a t flip-flop (to hold it open), double extension doesn’t work. The left piston triggers either early or late, inconsistently, and it makes the door close in an o-shape, not fully sealing. When you try to open it, the left piston on the bottom triggers and breaks a repeater. Any idea how to fix it? To me it seems like Minecraft bedrock redstone being inconsistent , but if there’s a solution that’d be amazing Edit: I realized that I was using a slightly different design, I thought this was the video where I had found it but turns out it was a different one sorry

[@AviAnimatorBoi]

I'm on Java-

[@durwoodthegiant4421]

Is there a way I can split the lever circuit to have 2 seperate activation points? One for outside the gate and one inside

[@sasgaming3164]

​@durwoodthegiant4421 could do what i did and use a t-flipflop and have 2 seperate input points on the t flipflop

[@adrianneenglish3330]

There is a problem, the piston that grabs the middle block of the door tries to grab it too early and it doesn't work. I tried to fix it, but I can't. I don't think it works, but do you know why it's happening?

[@A_OverkillUser]

WARNING: do not spam the lever it will break the machine

[@tommetzker99]

Thanks

[@Leapusfrogus]

i’ve broke the machine twice from this and it’s a pain to fix, seriously don’t spam the lever

[@Kyledwaynearabejo]

Well done it working?

[@beeftheguy]

​@@Leapusfrogusmaybe you're on bedrock so its doesn't work

[@boywithamask1]

@@beeftheguyit’s specifically made for bedrock 🤯🤯🤯

[@TheGodofChaosItself184]

My man Tom you have no idea how hard I have been finding the right piston door mechanism, when I found you and tried it out, I never felt so overjoyed now that I can add it on my project that I have been building for months now.

[@pillowy9726]

IMPORTANT: If a button isn’t working, it’s due to its pulse not being long enough. Make a pulse extender (using 2 comparators) close to your button in order to fix it

[@RamboCodYT]

Thank god I was about to ask lol

[@kordsnaps]

Explain how to the button method?

[@user-jb7kp9sy3w]

Hi bro how to put a button??

[@USureAbtThat]

@@kordsnapsyou need a t-flip flop circuit Or just use a button with a pulse extender

[@megoraptorlol]

How do I do pressure plates?

[@pyroash-OFFICIAL]

I cannot thank you enough, i have spent hours trying to find a working 3x3 piston door that's not a bad one and its working and your finally helped me thx so much im subbing just for that your the best man.

[@carlnagel5688]

mine didnt work

[@Peter-Porker]

Because your on Java I think

[@LilPkxZakk]

i’m on minecraft edu

[@Safrez]

"It's very simple" Mye eyes: that's... THAT'S JUNK

[@No.1chopperfan]

Thanks so much I've been trying to make a 3x3 piston door for ages and all of the other tutorials were either to hard to follow or just didn't work so I'm so thankful that yours was easy to follow and work perfectly

[@chedomingo3221]

Thank you so much tomco! Every build i made in your channel works! I build 3 machines including this one and its the spiral door and the elevator one and this one too it all works tyam tomco!

[@Iamburger260]

Legend for showing us how to move the lever and it still works

[@Daniel_Rodriguez201]

What a W. I was looking all over KZbin for a good and cool door and Luckily I found This video.

[@B01itzzz]

Ty sm definitely deserves a sub with notifications 😊

[@bestiesforeverxxx2474]

Thank you so much this really helped you are the best I really recommend this to people with not much Redstone experience.

[@adreyanmendez8753]

Earned a sub and like! Much thanks !!!

[@JaiXyouseGamingOfficial]

This is so cool i can make secret base i subscribed!😊

[@flynn795]

I literally always thought 3x3 doors wouldn’t work on bedrock. Tysm for this build, works perfectly.

[@twokings1353]

you helped me so much trying to find a 3x3 door that works

[@Aw0lWarrior]

Awesome tutorial! I wanted a fancy door for the Redstone room in my storage area. Attached this to a T flip flop switch activated by a tripwire. Now the whole wall opens up when I approach and closes when I leave.

[@Its54M]

Worked for me just fine :] Tysm man

[@user-xz2fq4qf4q]

OH MY GOD THIS WAS SO HELPFUL

[@bobthebuilder7598]

omg tysm i was struggling so much bro

[@PandaTubeGaming]

Works amazingly! I watche Mumbo's video, but realized that it would't work for Bedrock. This build, however, worked perfectly!

[@ultrafire615]

Thanks this helped a lot my friends will be very impressed

[@Darkmaster-hr8ex]

Thank you bro ❤

[@adamcullen9972]

I cannot thank you enough, i have spent so long trying to find a good door that works and yours was the only one that actually worked. I appreciate you showing how to move the lever especially

[@pixelated2170]

I have to agree with you, the tutorial was clear and very easy

[@TTPD41924]

You can’t close it on the inside 💀

[@MemezRCoolMemes]

Same

[@perceptionmoonYT]

Bro just explained it so simply, Thank you!

[@lilscorpion]

My first 3x3 door, I feel like mumbo already

[@padraiclester6558]

This helped soooo much, you are a legend

[@99RobloxDevs]

Thank you so much for this video it is the first one i have been able to make. Tysm!! :)

[@DOGninjapowers]

thanks i love it😯😮😲💯

[@Sammy32086]

Thank you so much you do bedrock redstone

[@Dinosaurs333_]

Thanks for the help!

[@user-0710]

Clear and easy! Thanks!!!

[@Hai-im-kabl]

This ia the third or fourth tutorial ive done on this but onky the first that worked! Big thank yous and a sub

[@spiffyvdog9813]

im not even done building it but im grateful for ur skills and ability and sharing ur knowledge with us less knowledgeable.

[@hologram.444]

Loved the tut man thank you, is there any way to make this using buttons that work to open/close on either side of the door ?

[@treyrickey2423]

Thanks so much dude

[@stevefromminecraft5745]

Omg this design actually works! Thanks!

[@JustWendigo]

Thank you so much,this has really helped me build my little gate in my small fortress The 9x9x1 ration fit perfectly Tysm!

[@tomerminich1746]

thank you

[@gamingtw7448]

Thanks you so much

[@user-fo9is3kr7i]

Thanks you man i love this door +1

[@omerkayrak1967]

OMG! it works

[@RenierGoosen]

Thank u so much for this vid

[@BratWurstStudios]

Imma try

[@Stuffed_Person]

it works in education as well and thanks for the tutorial :)

[@user-iw8kt1br8o]

This works in my one but has a hole at the bottom middle. Still works. (exept the moving the lever some where else part. One of the pistons move another when i move the lever and do ur instructions when doing so.) Thanks mate! Also, this is one of the REAL builders for bedrock, not Java, so FINALLY. Update on this. I got the hole fixed. It was becsuse i left the blocks at the bottom (the black and yellow ones) and when i broke them, it was fixed. Update 2. It did the hole again.

[@user-iw8kt1br8o]

Thanks for the like!

[@landosstudio7448]

So it doesn’t work

[@Rosiecatherall]

Thank you

[@Derpy_Chica]

I'm making a survival map and this is perfect for a bunker Thank you

[@Sir_Meepus]

that last bit with how to change the input was probably the single best detail that could have been added.

[@sbeebs1419]

Made this door for my beacon room and lined the room with quartz, a real pain to be made. Also make sure the repeaters are set correctly and the 9x9 is dug out properly otherwise it’s a whole other problem. I even added an observer to give a doorbell to some noteblocks in a pulse extended way 👍

[@Jaqui-fry29]

Just a question. How would I add button to this build? You had buttons at the start and I’m confused as I want buttons for it

[@WithinTempationLuciusMoterEath]

It worked it thanks:)

[@maxbrandriet3306]

i’m dealt by with some ping issues on my bedrock realm, i believe one of the repeater timings is off and is causing the double piston extender to not pull the middle of the door down, leaving it in the bottom middle of door. Maybe there’s a way sacrifice some speed for a fix? help appreciated

[@sammy-raycherry1543]

Thanks so much! Works great for me. Keep in mind it might not work the same on Java

[@TomcoTwo]

You're welcome!

[@globalgamer4379]

thankyou so much

[@OfficialFancyRatGT]

at the bottom the top piston that is suppose to get pulled down after grabbing the middle block dose not got down can you help

[@ZeKimBo]

Great video! I used this idea and am going to give you credit for original design.

[@NikkGaming-ih2gy]

is there a way to place the level somewhere upward not underground because i wanna have it on the wall next to the door

[@Future_FriendRBLX]

Anyone know how to fix the middle block getting stuck in the corner of the door?

[@denversatterfield9048]

No change both repeaters on right side to three tick havent had it break since👍

[@EpicGhostShadow]

W tutorial, a bit fast but I u was able to keep up

[@SimonsAstronomy]

Thanks so much 🎉

[@TomcoTwo]

You’re welcome 😊

[@user-anonymous4910]

Question: What am I supposed to do if for some reason it is off-timed despite it being built EXACTLY like shown in the video. I can't for the life of me have the door close back up without either the center block being taken all the way down or the bottom sticky pistons trigger to quickly to grab the center block

[@kordsnaps]

Tip: Show how to do the button variant that was shown in the start of the video instead of the lever.

[@ubahni]

t flip flop

[@Alexminecrafter1]

@@ubahni i dont think that is a thing for bedrock edition other than the copper bulb in the previews and betas

[@ladyfelwinter6776]

​@@Alexminecrafter1it is, I just did it today

[@ladyfelwinter6776]

@cndubz3413 the guy has a video on here, you can look it up. He describes it very good

[@asxxon]

@@ubahniwhat on earth is a t flip flop? 😅

[@stickdriftgamer9024]

Can’t get the timing of the two pistons to grab the last block the top piston fires to grab it but the bottom one doesn’t fire to push up the top piston.. definitely matched the tics on the repeaters and then tried every possible combination of tics aswell nothing get the bottom one to fire. It’s probably obvious but I can’t figure it out

[@Brayden-uq8lp]

Same

[@jacksonellison6850]

It works. Watch the entire video. The first test he does with the lever didn’t retract the middle block for me, but when I finished the build it all worked perfectly. Thanks!

[@christiangarcia5012]

Cuz he didn’t. he cut the recording

[@christiangarcia5012]

Cuz he didn’t. he cut the recording

[@Iskandr82]

Followed the tutorial fir this door without issue. Then I used your button tutorial qith the flipflop and the center piece doesn't get retracted :(

[@user-dj2ds9en6c]

Keep the good work up

[@MemezRCoolMemes]

Bro finally a good video no clickbait

[@liandrodevilla2073]

How do you keep it cloeed and only open when activated by a level, button, etc?

[@reijihara]

thanks dude

[@Sukuna_jjk44]

Thank you

[@BADTIME98980]

FINALLY A REDSTONE Machine THAT WORKS ALL THE ONE I FIND DONT WORK OR BREAK

[@tylerbryan2176]

dose it work for java? or only bedrock atm

[@springtrap_du4840]

Its the first time i see u and i alteady love ur video

[@vaxzel9959]

hey how’d you make the button entrance in the first couple of seconds into the video? i would really like to know so it fits my base really well

[@TomcoTwo]

This video 👍 How to ADD BUTTONS to ANY Door! [Minecraft Bedrock] kzbin.info/www/bejne/gJm2iJmEqcieoNU

[@B01itzzz]

Is there a way to make it 2 way so open from each end

[@CyrusBlack198]

Make a toggle flip-flop that is connected to buttons on each sids

[@user-ww9wc7bt2k]

How do you do the lever for the other side?

[@C0ltzYT]

I mean you gotta know it yourself its easy wiring Just do the same wiring from the outside to the inside It has to be a button not lever

[@BratWurstStudios]

You can make the button act as a lever, he also has a tutorial for that

[@Snc-np4hr]

So, not sure if you'll see this, but havin' trouble with the double piston extender. I have it all set the same, but it isn't firing the second time most attempts. And even if it does it's ends up being too late to grab the block as the bottom piston pulls it back. Tried changing tick speed on the repeater it just makes things worse. Any ideas?

[@TomcoTwo]

Idk off the top of my head but I wouldn’t change the repeater ticks, if you have discord or Twitter I’m happy to look at the redstone to see if I can spot what’s up tho

[@Quacksterthe2nd]

It wasn't working for me until I reviewed and saw I missed a repeater placement for the double piston. The feeling of it working is crazy

[@djawesomedude9499]

I have problems with the middle bottom piston, it works perfectly half the time but for whatever reason leaves the middle door block above where it is supposed to go by 1. I've also seen that leaving the door open causes the same piston to reactivate and cause the same issue, leaving the center door block out of its place, without any redstone signal (for some reason)

[@kevinto1478]

Oh my gosh This is the successful machine for the first time I try

[@OfficialDrBray]

This works very well it just work only fifty percent of the time it will work then retracting it will sometimes leave a block right above the bottom middle block we’re it supposed to be any feed back or how I could fix it I built it multiple time and it does it every time

[@TomcoTwo]

I’ve never had this happen to me or heard of it before so I’d suggest just ensuring everything is like I did, if you have discord or Twitter you could send me some photos to see if I can see what’s up

[@huntermatthews6198]

I'm having the same issue. not sure what is, the only thing i can think of is maybe because I'm on ps5@@TomcoTwo

[@lonelyjuice5881]

I set the repeater to the left of the top bottom sticky piston to 4 ticks and it fixed it

[@Future_FriendRBLX]

I found out the fix. You have to power the block when opening the door, not the redstone.

[@pillowy9726]

@@TomcoTwoit’s due to a short pulse. A pulse extender is necessary if you want to use a button. I posted a comment saying something similar to this btw

[@bobthefish-rl8ly]

Thanks

[@AdrenalineAdept]

This is such a good design but I need help with one question how did you get the buttons at the start to work like that

[@goldenfox6635]

Agreed

[@saltycritic]

same thing with me

[@kaydenl3]

look up a t flip flop (I think that’s what they’re called) it pretty much makes a button work like a lever

[@AdrenalineAdept]

I watched another one of his videos which has the solution so watch that if you are wondering

[@toxlcdark]

@@AdrenalineAdeptthanks for the very vague explanation very helpful.

[@KICKIEBOY13]

How do I make a lever on the other side for going open? And how do I get an button?

[@kiwicrusher7]

The first piston on the piston extender is getting stuck so how to do you fix it because I followed all the steps with the lever on the block.

[@Rew-nd99]

I don’t know this happened to me too

[@michaeltuohey4170]

How abt inputs to open it from both sides?

[@Gorilla_Tube]

Thx

[@catking9352]

Graet vids but the middle is stuck and the repeter on the bottom left in not bieng activated any ideas

[@midem3]

Crazy, really impressive

[@TomcoTwo]

Thanks!

[@danielswiejkowski9491]

How did you make the buttons work on both sides?

[@TomcoTwo]

This video should help :) kzbin.info/www/bejne/gJm2iJmEqcieoNU

[@kravenmusic170]

​@@TomcoTwo😮

[@IfOnlyYouKnew79]

Hello, I also can not make the middle block retract at all, I've tried every fix i can find but nothing makes the double piston extender grab the block back. Shame because otherwise it's great, very clear, easy tutorial. Wish I could make it work.

[@NotBlinxz]

i made a mistake so on the left repeater that goes into the bottom left block there was a block on the left of it i brok it and put redstone and made it a 3 tick and it fixed it

[@loafi6815]

I cant get it to fully retract :/ The second piston is grabbing it but neither the block or the second piston retract fully

[@goldenfox6635]

How exactly do you get buttons to work with it

[@mitsuo1531]

T flip flop

[@The_Blacker_Titan]

Thanks your like the only one who doesn't click bait people thanks 😊😊😊 5:48

[@haydenmilam8252]

How do u make it with a button on both sides?

[@jeffd824]

After 3 other 3x3 piston doors failed me (I'm blaming the realm server, not the designs) this one worked!! Thank you! - Bedrock 1.20.71, Realm Server -

[@brokenheartrapvr]

Can you do how to add a button to the 3x3 door I copied the 3x3 door piston red stone system but I wanna know how to add a button for it to work and not a lever

[@fudykamin3018]

Can we use a button to replace the lever

[@CookieGames2012]

can you do a world downlod pleese idk were i messed up building it

[@Its54M]

Give this man the credit he deserves

[@bowser_man8006]

How did you do the part to where you press it? It opens and you press the other button it closes.