The ENGINE SWAP I've been waiting for...

Today on Aussie Arvos we are finally doing the engine swap!
Support the channel $5 Free Shipping Aus Wide! ✔️
Aussie Arvos STICKERS: ➡️ aussiearvos.co...
FOLLOW US ON INSTAGRAM @AUSSIEARVOS
Follow Aussie Arvos @ / aussiearvos
Follow Liam @ / _liam.jones_
Thanks so much to everyone for watching and supporting the videos!
Music by Scott Buckley - released under CC-BY 4.0. www.scottbuckley.com.au
Music from #InAudio: inaudio.org/
Track Name.
#Coilcab #4x4 #offroad

[@29Automotive]

While the injector pump is super accessible id highly suggest removing it and getting all new seals put in it. Ususlly once one seal starts leaking others will start leaking. Would be worth it for peace of mind while you're going to all of this effort. Loving the rebuild boys

[@AussieArvos]

Thanks mate !

[@willtruckjohnson]

Go rankin diesel for this mate he does a really nice job hes in baysey

[@coleEmmm96]

Yes agreed mine starting leaking diesel

[@calanduffy6857]

Man the music 😂 You fellas dropping an engine on a bare chassis or throwing the ring into mount doom? Love it

[@JamieCon]

Should be changing all the rubber mounts at the minimum Best time to do it with it out

[@ericjohnson6802]

Agree...400 bucks well spent.. made a big difference to our GQ handling and ride quality.

[@jonesy1130]

Thanks mate, after hearing all the suggestions to change them I think I will

[@jonnewton5929]

Great work boys. Good info that everyone can understand and make use of. Cheers lads. You're killing it.

[@AussieArvos]

Thanks Jon ! We really appreciate the support!

[@fatmanoverlanding]

Slowly getting there boys. Gotta love having all the equipment to do a project like this. 👍

[@AussieArvos]

Thanks mate! We are very lucky, makes it so much easier!

[@keilfestin4606]

Episode getting better than ever .. cannot wait for next upload love the built boys

[@AussieArvos]

Thanks keil! Means alot!

[@robertgeddes511]

I would use genuine O rings on the injector pump. Those O ring set get sets get you out of trouble but are not a long-term solution. But still very inspiring video.

[@jamesexploringonline872]

Love your shorts, real outback Aussie 🇦🇺 something to make ppl subscribe. It's been a while, and I still love your content, especially th one.

[@HammerRocks]

Nice progress gents. It's starting to come along nicely. 👍

[@donaldo1974]

I'm more worried about the condition of your shorts than your engine and gear box mounts exposing those nuts to the elements could be detrimental 🤣🤣😆

[@kinbakukittenmeow5049]

I really admire how precise you are like the break and diff spring for example. You could have just left it. But you made the adjustment and you a proper job with keeping it to a clean and strong standard. You could have half arsed so many things but you took the extra time and I really like that and your build especially it feels more relatable to those out there who don’t have a whack of cash on hand to just buy everything it has heart to this build.

[@AussieArvos]

Thanks mate!

[@kaydenCarins9386]

Noice work boys!! The build is coming along sick! Can’t wait to see it finished and off on its first adventure.

[@AussieArvos]

Thanks mate!

[@chrissimons9733]

Another top video fellas can't wait for the next one.

[@AussieArvos]

Thanks Chris!!

[@trickster8635]

I noticed it's running the early GQ type gearbox with PTO cover. I have a complete PTO winch assembly to suit, shafts, control cable, supports. 10,000 LB, Powerauto winch head with 50m of dyneema rope. Can't sell it, nobody wants.

[@jayarre1839]

even though they look alright i’d recommend changing the gearbox and engine mounts, it’s not an enjoyable job with the body on. get a racebred passenger mount as the left always brakes from torque steer, and then you have piece of mind they’ll last another 25 years. same with body mounts, just make sure you buy genuine

[@CA11100]

so many small jobs would be nice to do while there's easy access haha, I think id just go nuts and do every seal/wear part that I can think of

[@stco2426]

Really great progress here. Interesting to see how much higher (I think) the engine sits in the coil chassis than the other one. Is this higher off the ground (maybe) or just above the rails and cross pieces. Is the engine / drive angle the same? You show the shaft differences, which is cool to see. Lovin' the project. Nice!!

[@jonesy1130]

I believe drive angle would be the same, not 100% sure though!

[@InsideTheOutback]

This was a great episode, simpke straight to yhe point no flufing around. Makes me want to give building a GU a go. Super keen to see it when its done guys keep it up.

[@AussieArvos]

Thanks mate!

[@liamms9469]

Loving the content boys keep at it 🤙

[@AussieArvos]

Thanks Liam!

[@keithhaycraft3765]

I had a Landcruiser ute on which I had a piggyback camper which needed a water tank so I buought a plastic tank & put it between the chassis and the tray. Now might be a good time to do so if you want to fit one.

[@Philipk65]

Great to see the Patrol coming together.

[@Lvke_]

yes lads, love to see it

[@LukeWarminger]

G'day Aussies Arvos, what happened to Liam's shorts? Definitely garage shorts haha. Awesome video, thank you for the great content, I'm looking forward to the finished product. Will Liam paint his cab? If so, I'd recommend dark red raptor coat.

[@AussieArvos]

Hahahah! i know right, thanks mate!

[@alexcross7739]

Brilliant work Liam and Patrick

[@AussieArvos]

Thanks Alex!

[@jpwatson8811]

Should think about doing injector pump and replacing the engine and gearbox mounts as it so much easier to replace at this stage.

[@cyclemoto8744]

Thanks for the content fellas. Cheers

[@TerryBeatson]

Stunning job lads, you fellas nailed it.

[@AussieArvos]

Cheers theorislav!

[@wayne1959]

Ahh, that engine installation music lads! The edge of my seat may never recover the ordeal! 😀😀😀

[@AussieArvos]

Thanks mate :)

[@neilbates8409]

Great teaching guys. Learning so much very informative

[@AussieArvos]

Thanks Neil!

[@DrewPeabawls]

The shorts situation is getting a little wild! Great work guys!

[@AussieArvos]

Hahaha! Thanks mate!

[@maxfish4770]

Favourite shorts mate 😂

[@xaviermarshall9398]

"this is where its going to live, till it goes to the tip" 😂

[@vdlau]

McGuire's aluminium wheel cleaner in the purple bottle is perfect for de-staining the inlet manifolds/gearbox etc its also the strongest degreaser I've ever used haha

[@DNone-dy3rm]

👍Great episode boys, look forward to the next episode.

[@AussieArvos]

Thanks mate!

[@seanhamilton4175]

Haha the music, love it 😅

[@JCYT]

Great work. Loving the videos mate

[@AussieArvos]

Thanks Jonathan!

[@peterjarrett8099]

im just amazed you guy havent been age resticted with the state of Liams shorts!5

[@AussieArvos]

🤣🤣 i know right!!

[@1993Revhead]

Sundays are a bloody W.

[@outonthetracks]

Just wondering what process you had to go through with VicRoads to make sure you could get the new build roadworthed and registered?

[@jonesy1130]

As of this point nothing has happened with vic roads. However based on the requirements for a chassis swap certification at vic roads I have already talked with an engineer who will provide a VASS certificate (engineers certificate). Then should be as simple as filling out some paperwork!

[@Jagermonsta]

coming along well!

[@davetunbridge6637]

Flush you brake lines with metho, did my 105 series a while back and was surprised at the gunk that came out. Ended up fitting new callipers all round and a new master cylinder. Was only going to put new drilled and slotted rotors but hey where’s the fun in that🥸

[@greg3241]

Good job on the music

[@Jay-uw2eb]

Nice work guys she's comin along nicely 😎

[@AussieArvos]

Cheers Jay!

[@matty5952]

Canttt wait for the finale product mate

[@rigelrogers5264]

U need to brace your rear coil towers otherwise you will bend them as they are highly known for it

[@andrevanderwalt2515]

Fairly sure they did this earlier in the build

[@jonesy1130]

Rear towers are already braced with the Blackhawk bracing. Differently style to other bracing so not as easy to see it’s been done!

[@kenezos]

Love the dramatic music 😂

[@AussieArvos]

🤣🤣 cheers , couldn't help myself

[@Bullarabdog]

Coming along nicely lads good shit

[@findingselfagain4014]

Great stuff, clever dudes

[@remychadwick2467]

Need a shorts swap to go with it :D

[@happymanasfksubaru2846]

It would have been much easier to change your fuel pump to boost compensator pump. It would still be ok with your factory 10mm

[@Wroeys4x4]

Hey lads have you sourced a steering column yet at all? Leafy and coilcabs are different ran into the problem whilst doing .y old cab swap

[@jonesy1130]

Have sourced the lower shaft section but not a whole new column. I was hoping I could just replace the lower section!

[@Wroeys4x4]

@@jonesy1130 hopefully you can just do the lower, I never even thought of that when doing mine ahah

[@jonesy1130]

@@Wroeys4x4 update... looks like I have to replace the whole thing. Pulled it out and it seems GQ column is different design to GU and is single piece instead of two.

[@Wroeys4x4]

@Jonesy buggar always something

[@petergill8819]

Yeah rule of thumb if your car says it’s empty there’s at least 20 L left well that’s what I’ve experienced in so many cars

[@247dirt]

Where’s the superior suspension sponsorship? ;))

[@jacksonwelch9870]

2:48 they’re literally splitting 🤦‍♂️ you’re going through all this effort just do them

[@darrydondon]

Great work.

[@AussieArvos]

Thanks Darren!

[@scottchapman5783]

If those busted arse old shorts are NOT at the Sydney National 4x4 Show, I'll be most disappointed in you young fella!!

[@ryanc5517]

😂🤣😂🤣

[@AussieArvos]

🤣🤣

[@pullingguard1527]

Is there any reason you didn’t change the engine?

[@jonesy1130]

TD42 whilst slow, is reliable and healthy and even pretty good on fuel. Didn’t want to have to put 10’s of thousands for a new engine, supporting mods and engineering costs!

[@Bennyboy-dog]

Progress is exceptional so far...very few snags. Speaking of brakes, would now be a good time to install ABS on the vehicle?

[@jonesy1130]

Although the diffs do have provisions for ABS. I won’t be using it in the build as I believe there has to be a bit of engineering/testing for it work properly

[@Bennyboy-dog]

@@jonesy1130 Fair enough - its probably touch and go with the "engineering" as it is.

[@Phippetz69]

Don't have a front diff your wrecking?

[@AussieArvos]

Yep we've got a front GQ diff

[@AussieArvos]

Message us on Instagram

[@Phippetz69]

I don't have insta lol I'm after the pin that holds on the panhard rod if they are the same as gu?

[@cheapsmoke4096]

Drain your oil first then take filters off, no oil spillage ;)

[@MKPatrolGuy]

The filters have anti drain back valves, there is still oil in the filters even if you drain the oil first.

[@davetunbridge6637]

My 105 cruiser has this nifty catch tray with a drain tube under the filter,makes changing the filter a zero mess job.

[@eastcoastexplorers4x415]

easy as... If only it was that easy every time

[@tadeuszmichaelwlodarczyk3120]

Good to see your efforts are starting to pay off slowly but shortly✔️✔️✔️ should be awesome in the End👍👍

[@AussieArvos]

We can't wait! Cheers :)

[@tadeuszmichaelwlodarczyk3120]

@@AussieArvos 👍

[@andrewphillips8966]

Let’s do gum guys !!!❤

[@AussieArvos]

🤣😁😁

[@CatNamedMilo]

What do you fellas do for a job outside of KZbin?

[@ryanc5517]

I believe Liam said in an old video that he goes to a university studying land surveying. 🤔

[@triggerhappy8872]

👍👍

[@dillonjoyce1760]

Need and new shorts ?

[@thomasbuckley4649]

lets goooo

[@RhettKelly3051]

Someone has to say it.. that dramatic music was cringe and annoying. The rest was sweet

[@brentmcd12]

Great work ! fascinating to see ! Go the Patrol! 🛻🤙📹😎

[@SquidInk02]

I mean no hate but u could atleast buy shorts that don't look like they have been through a war

[@AussieArvos]

🤣🤣

[@peterbigpete0877]

Get ya self done new shorts bro. Lol.

[@Aussiebuilds]

You should get a mits alloy tray

[@larcore1]

Get some new shorts mate

[@bumpajukesy9736]

Making a 2 day job into a 12 month project.

[@fatherchungus2947]

Love the video but hate the clickbait. Makes it feel tacky and I don't want to click the videos because of it

[@nickgrech9634]

Yewww

[@aloooox]

First

[@Generalpickaname]

Stupid editing, made me cry when the engine was being removed and transplanted. 😂 Nice one fellas!