The entire selection of Milwaukee M18 Batteries EXPLAINED! Coptool Power Tool Showcase

[@Big0s07]

I would be able to use those three high output batteries at my job site to power all my milwaukee tools and then get home to tackle my yard work. To power my milwaukee trimmer and blower that I just got. I’m an apprentice plumber and all my power tools are milwaukee so these three batteries would be put to good use everyday. Thank you guys for the opportunity and keep up the hard work

[@ToolShow]

Congratulations Eric! Please email us at Info@Coptool dot com so we can get you "Rob's" Packout!

[@Fee.1]

Congratulations and kudos, the trades don’t get the respect they should. Good luck on your journey, sounds like you’re killing it.

[@Big0s07]

Coptool THANK YOU ROB for the packout!!!

[@billbaumiester6764]

The blower consumes energy like crazy on the rabbit setting (vs the turtle setting) My 5.0 battery consumed 50% of power after only 5 minutes of use

[@cameltoeinspector6015]

lucky bastard 😢

[@ToolShow]

Hey guys! The response has been so good that we've decided to wait until next Thursday, August 15th to choose our winner. So be sure to tell us in the comments about the job you'd tackle with this amazing limited edition packout!

[@MrYAZZ-hl7pw]

I am a commercial electrician. 12.0 = Heavy Drill through Concrete using my Fuel M18 SDS Hammer Drill. 8.0 = Drilling, and cutting a lot of metal/steel using my 1/2" Fuel M18 Drill & Sawzall. 3.0 = Tightening a lot of bolt & screws with my Fuel M18 impact. Can you let me know if I entered? Thank you guys so much for the video, and for the chance to win.

[@billyhighfill]

Did I mention that I have a rusty firebird? Did I also mention that I got allot of sanding??? Well let me tell you about this wonderful car. I picked it up off a trade, and it's done me wonders since. Buttttttttt! There is one glaring problem. The paint looks like a 5 year old was in charge of clear coat. Randly accross the car the paint/clearcoat is chipping and fading bad. Soooooo, if I get these wonderful Milwaukee power cells. I plan to spend the next few days, heck, maby even a week, sanding this bad boy down. Then it's off to the paint shop, or rattle can, depending on how my wallet is feeling that day. :) either way, yall have solid content! Keep up the good work!

[@fatherfirefighter7751]

I will be rebuilding my 1996 Mystic Mustang Cobra with my 1yr and 3yr daughters. I had always wanted to do a project like this with my dad, but never got the chance. I've been saving money for 3 years doing odd jobs and finally have enough to start. These batteries would help with my 1/2" high torque impact and many of the other Milwaukee tools that I've been accumulating in preparation for this project. Love the channel, keep up the good work.

[@Toolproof]

Need this One Packout to Rule Them All to power through demolishing my old front walkway... and nice explanation and 2nd camera angle, folks! Good to see some past video of Scott in background too. (Oh, and now we know how you powered the Milwaukee to open the Bulldog earlier...!)

[@gruettner420]

I am a new electrical apprentice in Louisiana and have recently purchased a few Milwaukee tools for the job and home. Sadly i only have 1 charger and at times having to use that 1 slot for multiple tools. This would be such a nice upgrade for what i am doing now and plan to do! Thank you for the opportunity.

[@romeoiglesias7374]

We're currently starting the task of building our stairs from the top of a rocky 30ft cliff down to a beach cove for access. The faster we can get off drilling into the rocky face and fastening down supports the better and safer!

[@laurasalas3005]

My wife and I bought an 1/2 an acre by Fort Myers Fla and we need to maintain the weeds. We got our self a Milwaukee F18 fuel weed eater and added a brush cutter attachment. It's a great piece of tool. It's like putting a blender on top of the weeds. And believe me ,,,,, there are some hefty vines by those woods. We took two older model midrange XC, one XC6 and one XC8. It was not enough. I could not finish the clearing. It would be more efficient for me to take extra and more powerful batteries. Keep up your great guides. Thank you.

[@ellarry5519]

Amazing review, I actually learned a lot. I would love this kit for my 1/2" impact to work on the oil rigs so I don't have to run so many air hoses and a big compressor.

[@ryanrmatthews]

I really enjoy the M18 battery line up. I used every different battery everyday at work. My favorites right now are the HO 3.0 because they're small and powerful. I would love to win that supercharger and extra batteries, you can never have too many batteries!

[@brotherlove100]

Finally, I finally understand the myriad of batteries. Or the battery of batteries they offer. Thankyou for explaining the difference b/w HD and HO.

[@cooper1649]

I could use them everyday in shop working on lawn mowers to dump trucks. These are awesome and so are you guys!! Keep it up

[@ernestorodriguez5566]

The kit would definitely help me at work! As we use a lot of our power tools in the electrical industry please consider 🤞

[@dennisbaker4990]

I have only Milwaukee 18 volt tools that I use everyday around n my home I am a retired plumber/ pipe fitter and used a lot if different cordless tools in my life and I keep coming back to Milwaukee tools for my own cordless tools. I recently built a deck and used nothing but my cordless tools from Milwaukee tool. I would buy nothing else and I also have a drill and a 3/8 impact that i bought in 2005 and they are 14.4 volt and still use them very often. Excellent tool line and would recommend them to anyone who asked me about them.

[@johncampbell6062]

That kit would be great to have. I just started building Adirondack chairs and cornhole boards. It would go great with my Sanders, miter saw, table saw, impacts and future router when that comes in. This has to be the first video I have seen that explains all of the batteries so well and simple. Thanks Cop Tool

[@saragiguere6048]

My husband works in the trades and has all Milwaukee tools this would be an amazing surprise to give him. Thanks for doing this!

[@571gomez]

I use to watch a lot of VCG videos but you guys are taking all of my views . Love your content guys !

[@supertech3992]

Why would anybody give this video a thumbs down? A great overview of Milwaukee batteries, thanks Rob and Sarah.

[@mitchjones2821]

I’m in the daily grind of plumbing a 4 story, 32 apt building, nearly alone. This would upgrade my SuperHawg and all my other Milwaukee tools to make through the day with far less down time. SO MANY HOLES!!! I’m a Milwaukee man to the max, I’ve got the Packout and so many tools but always seem to fall short with batteries! Love what Milwaukee brings to my industry. Love Coptool for helping to deliver their innovations in terms that people like myself can understand!

[@donvalk665]

That looks awesome. I have a poultry farm and we’re up dating the way Equip hangs from the rafters. I have 10 bldgs that are 50’ x 500’ long. We have around 30,000 screws and lags to change out and install new ones. We could sure use these batteries on this project. Thank you, Don

[@keanuross4548]

I use the 5amp/ 12amp on my m18fuel impact driver, the 12amp will put any bolt or screw into anything it is amazing especially when working away from a charger like heights etc or without power, the 12amp will last all day no stress, heavy and awkward but awesome battery with an amazing amount of power behind it

[@MQElevators]

This would be a great addition to helping me move people, one elevator at a time. Great content guys.

[@denniemelton138]

Still like know price ranges on these great Batteries.Be great for fence repairs Irrigation sprinklers Water Controller clocks mounted outdoors or Garage inside walls mounting.

[@troyocanas755]

I'm about to start remodeling my back apartment. Thise batteries would totally be a game changer in my Milwaukee fuel arsenal!!!! Thanks for the vid guys it was very informative and super awesome like always

[@kevinperez-fl6sp]

Milwaukee has always been my go to tools, i can sure use this packout for my M18 Fuel Hacksaw to cut conduit all day long!

[@stacyp2744]

Great job breaking down the whole Milwaukee battery lineup. I could really use that kit for building my vacation cabin in the North Carolina mountains.

[@lukepikaart8323]

It's hilarious how she is just cast as a mansplaining target

[@ToolShow]

You should ask someone to explain “mansplaining” to you. Sarah knows a ton about tools. She’s also a great writer and producer. Batteries (and electronics) are a weak point for her, so it was a natural setup for this specific video, to have Rob teach her, and allow our fans to learn along with her. Great try! Side note: People who unsuccessfully point out “wrong doings”, are usually trying to distract from their own poor behavior. Maybe spend the weekend looking at how YOU treat women in your life. And then ask one of them to explain “mansplaining” to ya!

[@eddiebadger4857]

Being a plumber it is my responsibility to protect the health of this great nation. As I am sure that everyone knows this responsibility can daunting and overwhelming but fortunately I have been given the training and Milwaukee tools to protect the health of this great nation. But I can't do alone. I need your help. I could tell by this informative video that your knowledge and Packout was just what is needed for this mission. I have the training and tools but I need you to grant me the power you possess in that Packout. REMEMBER THIS IS A MATTER OF NATIONAL SECURITY! I know that you will make the right decision and we along with Milwaukee will continue to protect the helth of this great nation! GOD BLESS AMERICA!!!!

[@eddiebadger4857]

Just incase anyone was wondering yes I am joking. LOL But great video!!

[@jesseallen4184]

Wow, great video. I never really understood what battery cells were or how they worked on the different range of batteries until i watched this video. Thank you very much.

[@stuartfontaineii4786]

Great information about Milwaukee's M18 battery line-up. I am currently outfitting my van with all Milwaukee cordless tools for my new cabinet installer job and plan to use the High Output batteries in my chop saw and table saw. I run a lot of panels and trim so the extended run time is just the thing that I need. After spending a few thousand dollars on cordless red M18 tools this past week, I could sure use a Super Charger with an assortment of High Output batteries in a Packout bin that would snap right into my stack!!! (Hint, Hint) :) Thanks for the great, informative program!

[@royaltoncoinexchange2297]

At the end of this summer, we will be removing our current deck that is old and outdated and will be installing a new deck. Those batteries would definitely help out with our current 3 piece kit which includes the sawsall, driver and drill. Thanks for the chance to win! You guys rock!

[@sotoisai]

I could really use the high out put batteries to drilling holes for the electrical and plumbing for my shed so I can finish making my man cave. The pack out case would make a great addition to my packout. Thank you cop tool!

[@lukeasti1049]

As a millwright we go from breaking large bolts on gear boxes (hd12.0) to tightening tricky fasteners in tight places (cp 3.0) all requiring the maximum power from my M18 lineup. This pack-out battery upgrade would make the day to day task much easier

[@franciscoambrosio9905]

You guys are a great show to watch on KZbin and the kit would help me with all the engine swap projects to keep my impact running longer and stronger as well as keeping the light on longer and no more having to wait for battery to charge losing money with tdd that down time

[@ballista7367]

It would help me as a diesel tech constantly changing semi truck wheels eith my milwaukr 2767 20

[@mikeyd1513]

I'm a commercial electrician, we're currently doing a project on a skyscraper in Atlanta 700 feet in the air. We need to minimize our returns for batteries as much as possible. I could certainly see this being a great asset.

[@craigaladon]

I have been restoring a 1971 Santana 21 sailboat. There have been some challenges throughout but have been making progress. Building a new floor, resealing deck to hull, and all new hardware have been some of the current and future projects. These upgraded batteries could help pull the heavy weight of these projects by running grinders, saws, and the trusty impact driver.

[@johnkraft5640]

Good review on how the batteries are designed from series to parallel to a series parallel. Educational. The Milwaukee brand is very beneficial in my search and rescue business from drills, chainsaws, to the MX FUEL lights. Appreciate the video.

[@miguellil12]

Hey sara I do trim Carpentry and I would really use this please I would love to get this giveaway

[@VCGConstruction]

Come on Sarah @coptool hook my brother Miguel up wit dem batteries and dat supercharger!

[@MichaelBrown-wo8cq]

I could use it for landscaping, cutting trees with the m18 chainsaw and all the other m18 yard tools I have! Love milwaukee tools!

[@chadbrown4918]

I need to build a new garage. Lightning struck our old one and we lost it.

[@aaronlemke946]

We are about to build a series of decks on our new house. The addition of High Output would do wonders for the power sucking drilling thru thick lumber and sinking more pounds of screws than I care to count. And when we're done, I'll still need to use those outdoor power tools to keep the deck trimmed and the yard looking clean.

[@noslenxela]

I am an electrician and I love love Milwaukee. The best tools I can use. Also great for my honey do lists.

[@tayzer301]

It would help me so much doing my hvac work, it's my first job and these would help me more than anything.

[@toolreviewtv8943]

I would use the Milwaukee m18 high output batteries for the Milwaukee m18 fuel sds max hammer drill for chipping concrete 2,000 pound patio steps. best luck to everyone! Thank you so much Coptool!

[@jmainel123]

I would donate this kit to my fire department. I’m big on Milwaukee and got them to convert to Milwaukee, we just purchased the 9” cut off saw and can’t wait to see how it works for ‘truck’ work.

[@domingomartinez5363]

First off thank you for giving us some knowledge on your show about Milwaukee batteries. I for sure would not have known that. Thank you again. Second I would use it on the first milwaukee 1/2 inch impact driver that I would have to buy. To try and find some work. 🙂

[@kevinboothe9991]

I started off using some of the first Makita cordless tools way back in the 80's then moved to the DeWalt stuff and was pretty happy with them but then moved on to Rigid and felt they were pretty good but then a few years ago my neighbor who had a hangman business showed me some of the Milwaukee stuff and I switched again and have never looked back. I work in the construction trade and have several of the smaller M12 products and love them but recently I've been buying more of the M18 stuff and not just for work but for projects around the home, I have the hedge trimmer that cuts better than my 2 stroke trimmer that I bought the year before but most recently I purchased the new string trimmer with the interchangeable heads and also purchased the hedge trimmer attachment (I have a monster of a hedge that is about 100' long and in some places almost 6' thick) so one of these kits would be wonderful as I could trim my hedge with 1 battery rather than getting half way though and then have to wait for the smaller batteries to charge in order to finish. I also got the pole saw attachment and it works better than my gas chainsaw. I'm very impressed with the Milwaukee family of tools, my next one will be the framing nailer. I've heard they may be coming out with a mower soon, if true, that will be awesome!

[@camtheelectrician]

I'd use these at work everyday, but mainly for building my cottage!

[@justtryn12]

Very nice !!!! I work for a Property management company ,and do a lot of remodeling . Putting new floors walls and bathrooms.and the longer lasting batteries would be a huge plus. The bigger batteries , and case have always been on my wish list.. but coast is a huge problem for me .🙏

[@advanders3705]

Remodeling a garage in to a den/room for my grandma. She is moving her mother (96yo) into her house and needs the extra space. She asked if I would be able to do it and without hesitation I always say yes. Won't be charging her anything as she always helps so many people without batting an eye! I will tackle the job but it would put a strain on the two 5.0 xc's I have. The 12.0 would be a huge upgrade for my super sawzall and rotary hammer, the 8.0 would be great for some longer overhead work, and the 3.0 would be awesome for my impact! Super great full for a giveaway like that!

[@chrislusk5560]

Great show and explanation of the M18! I would enjoy using all the HO on my new home and have the extra power to take to work.

[@chilango051977]

Absolute could use this pack out!!!! Would be headed the my brother in laws ranch to help him build his cabin out in the in country. Only thing is he has no power out there so we always have to be running some sort of generator. With the help of Milwaukee no more generator but maybe only to charge batteries. Now we can easily run impacts, and saws to get that cabin done!!!!! Thanks Milwaukee and CopTool!!!!

[@belatoth1446]

Great video, great explanations. The only thing I was missing is mentioning the outrageous prices on these batteries!

[@ToolShow]

Lol skipped my mind

[@uei651]

I could use that kit to help with all the houses I maintain for work. Also great explanation of the differences in the batteries

[@tonzellia]

I'm a big fan of milwaukee, thanks for breaking the M18 batteries down it gave us a better understanding. If I won the packout and super charger I would give her a good home with her brothers. It would help me with my next project building planter's and a trex deck with the super charger. Again thanks for the video.

[@walleyvideo8297]

I just got the Milwaukee portable 2 gallon compressor. The largest battery will help me work longer. Great video. Thanks

[@remington334]

Excellant explanation of the different batteries and chargers. I am going to change to Milwaukee from Dewalt as I am disappointed in Dewalt not making 18V lithium batteries anymore, just nicad. I am a builder and have at least 20 18V Dewalt cordless tools and the nicads just don’t cut the cake. Thank you for making this video. I now know what to shop for. Terry Tenbus

[@takenusername]

I’ll be switching out my collection to High Output. Home Depot has the HO 6 and 3 combo for $169. I grabbed two.

[@joep8520]

I would finish building my in-law's in ground pool and pool house. As well as finishing the "flip" house I am working on. Great content, keep up the awesome work!

[@chadmarlocardinal]

The Pack out kit will allow me to do my bathroom remodel so much better! Great Video... It answered a lot of my Questions.

[@levililley3066]

Great video! Very informative. I would use these new batteries while I am at trade school to show the other students how they work

[@HIEAr1]

These new batteries are awesome. I would love to have a go with them and use them for some personal furniture projects and private contracting.

[@jkaplan]

Very helpful video! I’d be using them with a Milwaukee high torque impact wrench to drive massive lag screws into the desert! I’m building several large structures for Burning Man and one of the best ways to anchor them into the ground is with giant lag screws. I used a 9ah battery last time and while the run time was great, the extra power from the high output batteries would definitely help. Trying driving a 2ft long screw into the ground!

[@tylerwray1566]

Doing a full gut/remodel on my house that was built in the late 40s. Slowly building my collection of tools but a couple high output batteries would come in handy.

[@jeremynovak6752]

I would use these to help kids in the boy scout troop I help out with complete their eagle scout projects. This would have been super helpful doing my eagle project because power was not readily available.

[@firefighter1241]

Those batteries and charger would come in handy for me. The 3.0 to use in my spotlight when I work nights. The 8.0 for changing trucks tires with my high torque impact. And the 12.0 for the super sawzall with torch blades when I need to cut cars apart.

[@sddill]

Getting ready to build a new house...These would be awesome !!!

[@n3wb3101]

The new batteries would be awesome to have! I am an electrician here in Hawaii and I use Milwaukee everything from my drill and saws to vacuum and lights. It would be a honor to have and I would rep it well! Aloha!

[@jeffersonfjeld]

At work I run and sds rotohammer, fan, and vacuum all day. At home I use the OPE. I bought most of my tools as bare tools so it would be awesome to not have to juggle my 9.0 and 2 5.0 batteries around. Especially since i sometimes forget that my 9.0 is on the charger at home while I'm trying to run several 1.5" holes through 16" of concrete.

[@mudrunner1]

My wife would tell you I don't need any more batteries, but you can never have to many. I could really use the Supercharger for my current 12.0 and an extra 12.0 would keep me going when i'm cutting those thick weeds and grass along the ditch with my Milwaukee string trimmer.

[@btbinnovationsllc6815]

I recently bought my FIRST Milwaukee tools. I bought the 18 volt tripod light and orbital sander.. I'm a contractor and I find myself working a lot of late nights, in poor lighting. I've owned Ryobi for 15+ years, and Bosch cordless tools for 8 years. NOBODY makes a work light as bright and tall as Milwaukee, and I'm quickly finding out just how great their quality is. 😁

[@richardmurray3660]

Thanks for your show the height out put batteries are awesome for ripping 2 by material with the 7 1/4 saw

[@Jura6941]

I a truck driver and I will use this power box on my Milwaukee M18 fuel High torque 1/2 inch impact wrench to work on my truck and trailer

[@dblecheck]

I could use these batteries for my wood working projects for sure!

[@eoghanfla6343]

My project is more projects! These batteries would help me build my new custom fuel shed for storing firewood and bins. My Milwaukee metal saw could really do with a high output. They’d also help with the winter tree trimming using my new milwaukee chainsaw. In other words, please send this to Ireland so I can make loads of stuff! Cheers guys

[@alecaagaard]

The h.o. 8.0 would be sweet on my leaf blower I use when detailing vehicles/motorcycles.

[@jua7265]

You use a leaf blower for detailing? A little more info please.

[@alecaagaard]

Yeah? For drying areas like the grill, tight spaces of bikes.

[@mj-1809]

Coptool I just got the M18 miter saw.. But I only got the bare tool! I could TOTALLY use the new high output batteries!! I haven’t purchased them yet because their so pricey. WOULD BE GREAT TO HAVE THEM FOR THE REMODEL I’M ABOUT TO START ON! Also I hear when using the high output batteries in the circular saws and grinders the power output is more consistent and longer lasting. fingers crossed 🤞🏼 love you guys!

[@JJ-se3wg]

Thanks for explaining all of that. No way I could use near that much power. I’d have to drive around town and look for contractors with Milwaukee tools and donate that box to em.

[@davidkohn1679]

I would definitely use this packout Kit to convert all of my outdoor power equipment to cordless for all my landscape needs. I would also upgrade my 18v tool platform over to Milwaukee which I’ve wanted to do for a while.

[@SuperOGNick]

Just started running a emergency mitigation team, bought new m18 tools would love the upgrade kit

[@carravagio16]

Need that packet - will be building custom stretchers for paintings, which means lots of milwaukee cordless tools in use!

[@frostdasnoman]

Working on remodeling my house. Have 3 bathrooms, a kitchen, and a basement to redo. The ho batteries would work great in my sawzall, impact, and hammer drill.

[@kenwagner2672]

A little late to the party but might as well so... I’m starting auto tech school this August and i have a Milwaukee 1/2 impact and i kinda cheaped out on batteries and just got two 2 mah batteries and they don’t last long on that big of a tool, this battery set would make everything a lot easier during school and at work!

[@JB-by8zk]

This set up would help me plum a house, by drilling all day with out having to keep recharging so often! Thanks

[@TheWachtelShow]

We have a lot of pushjoint to do I would love to use those batteries on the jobsite beveling and cutting pipe instead of hooking into the generator every day The Cords are always trip hazards

[@amsiroky]

Have to say, I’ve had had my eye on one of the SDSmax chipping hammers so I can redo the tile in my bathroom. That 12.0ah battery would sure last a while in that thing.

[@TheJet1]

This kit is going to help when We cut down Christmas trees for the local service club fundraiser. We’ve also got involved with helping repair flood damaged for low income seniors and working with Milwaukee tools these batteries will enhance the job!

[@abibodlogistics]

Can you guys talk to Milwaukee to produce this upgrade kit for the market so that people that can't win can at least buy if they can afford it because most definitely it is only just one person that can win this.Thanks for breaking down how the batteries work, people now know better.

[@michaelcorbett4001]

It would help when using our Milwaukee cordless Hole Hawg. Love this little giant. No longer need to get the cord out when doing our prewires.

[@johnboyspot]

Pops just got the 1" cordless impact. I'm sure he's gonna love it 😎 😎

[@deathcometh61]

5 amp hr on my impact, etc take a few weeks to run them all down. I have a 2amp m12 also takes 2 weeks. I really need to get the 6 charger (3x m18, 3x m12). Really enjoy it all

[@salalvarez5247]

I’m in need of a new fence so they will be put to work ASAP. Thx nice vid

[@linjob1]

This kit would definitely help me finish cutting studs and erecting walls alot faster!

[@mitchelltodd979]

This would run my M18 Rocket light for over a full work day. It chews 5.0ah batteries up in a few hours. Plus that case would look legit displayed in the shop!

[@luminosity8043]

I could use them to advance my tool collection and support the larger saws.

[@keeganyablonski]

This kit is exactly what i need to get theough a day on the job site .. the 12.0 will power the table saw all day and the 9.0 will run the sawzall

[@jacobchee9715]

I work at a damn sight. And we are currently working 130 feet up. It would be great to have bigger and stronger batteries. So I dont have to walk/ climb 12 flights of stairs

[@RobtJr60]

Wow! Where do I start. Well, I guess the next home project is where I'd be using this to build a new set of stairs to the back porch.

[@struppizei4548]

This kit would make my work at the farmside much easier. You know repairing machines, building shelters stuff like that.

[@francisbelangercyr]

Im a mechanic and auto body man and I just switched all my air tool to Milwaukee wireless power tool so more battery sounds good to me!!! ;p

[@hericbustamante230]

This kit would strongly help with all of the landscaping I do at a large amount of properties.