The FG-15...Revolutionizing Rapid Fire! FULL REVIEW

[@ToxicSkull0]

Cant believe we’re coming back to crank operated firearms

[@rytacarms]

😂

[@tariqschmidt1413]

just as the founding fathers intended. wait until you discover the musket upper recievers.

[@theirontyrant]

Me tinkering... adds worm gear...adds 5 to 1 ratio gear... adds brushless motor w/lithium battery pack... adds push button. I mean...never mind 😅

[@Mrfrerob]

It’s only sold as crank operated…. Small electric motors are readily available to the hobbyist 😊

[@vicdiaz5180]

there has been crank triggers for AR's for over a decade now. this isn't new bud

[@darkwriter77]

They should make this available with brass and wood furniture to complete the retro late 1800's Gatling vibe.

[@Doublezzranch]

I can hear the ATF calling this a machinegun already.

[@RolandtheThompsonGunner]

This one they actually won't be able to. Or I should say, they shouldn't be able to. Never underestimate your enemies.

[@KirstenJoyWeiss]

Ah. I knew I heard autistic screeching from somewhere…

[@GY6vids]

@kirstenJoyWeiss 🤣🤣🤣

[@KelzCasa]

They can’t call a grip a machine gun, but look what they did with certain triggers.

[@RolandtheThompsonGunner]

@@KelzCasa look what the did with "auto key card", and that was just a piece of art.

[@brucecook502]

This kind of reminds me of one of the little contraptions I bought for my AK back in like 2000 or 2001 called the "GAT" trigger. As soon as I went to use it for the first time, it instantly turned into a worthless broken $30 paperweight. As soon as I went to crank on it, the plastic broke and I didn't even get a single shot off. I also had this other piece of garbage called the "TAC" trigger which was almost as worthless. It kind of works like a binary trigger except it was an external device that also attached to the trigger guard and would allow you to fire on the pull and release of the trigger, but it's problem was that the entire thing was made out of very thin aluminum, and it was very hard to get the thing to successfully push on the trigger when I extended my finger during the release of the trigger during a pull. These were things I found in ads in the old Shotgun News Magazine.

[@TheMIghtyDago]

Get an frt trigger

[@brucecook502]

@@TheMIghtyDago well an FRT trigger wouldn't do me any good these days anyways because the last time I owned a semi-auto rifle was back in 2005 LOL, plus frt's are illegal right now as far as I know anyways

[@TheMIghtyDago]

@@brucecook502 ahhh i see. theres been an injunction that's been put in against the ATF with them tryna declare it a MG. courts have and are looking at it, would have to redefine the whole definition of semi auto and they aren't trying to do all that.

[@tjwrongwaymead8374]

Ad that rig to a binary with a light trigger and see what happens. I'm diggin it !

[@ScarryMarian2012]

Bhahahahaha 🤣🤣🤣🤣 *Stability* and *Accuracy* left the chat 😈🤣 Btw,happy new year man🎉🍻🥳

[@KirstenJoyWeiss]

Your standards are TOO HIGH 😂

[@ScarryMarian2012]

@@KirstenJoyWeiss for sure,since 20+ years ago when i ashamed 3 professional (1 with a rifle and 2 double barreled 12G shotguns) hunters and other 2 firearms owners by simply hit the first time an empty pack of cigs on top of a pole with a break open pump air rifle in .117 since the first shot (and the next 6 shots landed in the same L&M round emblem,in spite that i had never ever touched a trigger in my entire life untill that moment,while they spent over 150 pellets and totally miss that pack of L&M 🤣🤣🤣🤣🤣😁

[@ZoomerPrepper]

put it on a bipod or mount amd you're good

[@KirstenJoyWeiss]

I know there’s still HOPE for America, when I see inventions like this! 😜💥🇺🇸

[@GY6vids]

Freedom Ordnance is always putting out fun stuff that’s for sure! I use products like this as a litmus test. If you can’t see the fun in it, then we probably can’t be friends.😉

[@Courtesyflush52]

You have a low bar for hope dude

[@sniperofbuffalo]

I'm just imagining the carnage one of these grips could inflict on a mounted high quality 20" AR with an extended magazine

[@Ntop33]

Love this guy! You were prolly the first gun KZbin channel I watched when I was younger. Thank you Drew, at this point I'm balls deep in this guns world and preparedness lmao. BJJ and Muay Thai where the beginning, along with GY6.

[@vincea1830]

"Fuck everything in that general direction"

[@ericbergfield6451]

How does this interact with a binary-trigger? Does the crank lever fire twice as fast with a binary-trigger installed??

[@RelApex215]

This here is a thinking man!

[@Tango-Mike-Bravo]

Binary trigger on a belt fed!? Lmg role.

[@devinb2158]

Was wandering the same thing like would it still work?

[@doggonemess1]

I can hear the politicians screaming already!

[@GY6vids]

Good!

[@tymeier7570]

These have been around for awhile

[@doggonemess1]

@@tymeier7570 I've seen bump stocks and trigger attachments that do something similar, but this one is integrated into the grip, which is new to me.

[@brockaugustson7082]

man that cylindrical stroke is actually strasight fowward and back, ultimately.

[@frankmorris7003]

Merry Christmas & happy belated new years Andrew. Awesome as hell video always & im always glad to see you.

[@762x69]

5:52 Sterling Archer reference I gather 😂💪🏼

[@GY6vids]

😎🤝

[@robertellard]

Welcome back!!!!!! MUUUURIKKAAAAA

[@MrBigKid]

Well that’s unique!

[@nicknamean]

I get the same rapid fire results with my trigger finger cause my girl lets me play with her kitty!!!

[@impv1se]

archer lol. this gattling gun thing could be good for SUPRESSSSSSING FIIIIIIIIIREEEEEEEEE!

[@GY6vids]

Hahahahaah yessss!

[@Superabound2]

I feel like this is only practical with a bipod for you to pull the front of the gun down to the ground while you crank and prevent the vertically wandering muzzle

[@GY6vids]

In my experience still isn’t very accurate even on the ground.

[@awsomedude9111]

glad to see your still posting videos, quiet an interesting concept I haven't seen before.

[@GY6vids]

More to come!

[@shockracer]

Nice to see you back!

[@Fugettaboutit]

Raise your hand if you made it past 13 seconds in this vid.

[@billynomates920]

50 but i'm out 😂

[@werd2182]

Only the first 12 secs, lol...this feature has 0% practicality. Waste all that ammo and hit NOTHING

[@keithexum7312]

Need a removable handle to use your cordless drill.

[@dr.burtgummerfan439]

You must not have a dog 😂

[@light5699]

Nice to have you back man!

[@Dillpickles719]

Always love your videos when they come out. Some of the highest quality.

[@garysmith4635]

Way to put the 1800s back into modern arms. 👏

[@GY6vids]

What do you do to contribute to the 2a community? Would love to hear about your inventions that are helping push us along.

[@Imbroke1313]

I’ll stick to the binary trigger. At least you can still hold on to the grip

[@RolandtheThompsonGunner]

Understand completely. Though I still wish you made more videos. Your videos are more enjoyable than some of the bigger pewtubers.

[@cheezwombat1]

Glad your still doing vids. That gun is fkn crazy 😂

[@frankwafer6919]

Thanks!💯💫👍!

[@bradhignite8384]

id like to see them make a spring loaded crank to wind up and then to be able to release it with the trigger, i remember one from the 80s that fit the trigger guard but it wasnt very reliable because it used a trigger actuator with a plastic lobe that bumped the trigger.

[@Therealreggiej]

I want one

[@GY6vids]

Thing is a blast! So nice not having to lose any normal aspect of whatever you put it on.

[@crusiethmaximuss]

Hahaha, Andrew where did you find this masterpiece? That is amazin'.

[@jokerjr6918]

Will the Freedom Ordnance FG-15 Trigger Actuating Grip - Gatling Gun Style, work on my diamondback AR 15

[@Guardsmen4]

Stability and Accuracy left the chat fun entered a chat

[@Bushman33]

Shooting fliers 10ft above and around the target with the accuracy of someone shooting a Draco sideways

[@GY6vids]

🤣

[@dongatello6969]

1:54 Dude hit the land down under

[@TheZ0MB13HUNT3R]

We have full auto at home

[@NorthStateLiberty]

Looks fun as heck!

[@mattlyons8180]

Just to let everyone know them infinity targets are just rubber targets. If you have a pocket knife and a tape measure you can make 3 out of a cheap tractor supply horse mat for about 25 bucks for 3

[@DevilMann454]

Who'd of thought. Pretty cool 😎

[@bretr427]

Fun conversation mod for sure

[@custardthepipecat6584]

A full auto in the down under 🖖😸🍻

[@FixtIt]

Love how you have to let go of the gun to use it.

[@light5699]

Tripod worked great. What if you attach a drill/electric motor on the mechanism. How fast can it work, lol?

[@DukeNuggets69]

becomes a machinegun doing that, per ATF stupid rules.

[@bdkj3e]

I believe at that point it does become illegal

[@light5699]

@@bdkj3e well... dang.

[@alallan7584]

That thing needs a little electric motor to rotate the crank.

[@GY6vids]

That would be amazing🎉

[@skepticalbadger]

It would be illegal, no? Otherwise an M134 would be legal to own. @@GY6vids

[@samnkat8585]

Takeoff the crank and attach your cordless drill… Lol

[@Texasmade4444444444]

Is that a coffee grinder 🤣

[@froginthewaves8450]

Nice

[@Draggeezy]

Got this and so cool

[@edllanfranco9078]

Very fun

[@Neko_Jones]

Would this work with a binary trigger? That'd be fun to try!

[@phoenixkoa-7892]

You should do a video where you combine the grip with a binary trigger

[@mOOOp42]

This is very cool. I wonder how this would work with a Frankin Armory BFS 3 already installed. Definitely considering this if it works with my existing triggers.

[@MicrowaveDave-]

Same

[@northjoe]

Any ideas on why it can’t be shipped to Florida?

[@Gobantis]

Great video again. I could see some nut job (like myself) attempting to put this on a AR in 300 Win or 338 just to see what happens.

[@GY6vids]

Go for it!

[@dr.burtgummerfan439]

Antiaircraft mode

[@tjwrongwaymead8374]

Longer crank handle for better sweeping crank maybe ? Just spit Ballin, 😅 I think I need one

[@chado96k75]

Should try it with a binary?

[@AlphabetBoisAreSmelly]

That’s one way to give the atf the finger🤣

[@chuck110001]

be interesting to see this with a bipod

[@deplorablepiratecaptaingunberd]

Long time no see, dude!

[@felixmichael2904]

Where is my powerdrill again?

[@pemjoe]

How long until aft calls it a machine gun and you are on a list. And knock at the door. These companies need to stop making lists of who their customers are

[@Totes_ma_Goat]

Just 1 battery drill away from a felony. 😂 Although I think it would jam with a drill attached.

[@jorgesolis9468]

I would love to see more hunring content also

[@Mrgunsngear]

🇺🇸

[@mrmeadowsiscool]

worst accuracy but coolest shit fuckin ever

[@3rdcoastambit220]

How is this better than an FRT?

[@remington300]

first sigs 3k$ red dot, now this!? am I taking crazy pills!!?

[@justevil100]

2024 is already starting off....... weird.

[@EZPCTECH]

Revolutionizing by going back to 1914

[@wendellhatcher7011]

Why nit just oull the trigger quickly and keep accuracy. Or add a binanry trigger

[@sociopathmercenary]

Now you just need an adapter to put your cordless drill on it

[@ckoritko]

Can you use this with a binary trigger?

[@GY6vids]

Hmmmmm😎👍🏼

[@west3001]

Soooooooo coooool I want one

[@rcg3496]

The finger is faster and more stable 🤣🤣🤣

[@GY6vids]

Yup…but still is a blast and awesome way for alternative shooting fun.

[@alfredjr2k556]

FG15 is 9mm?

[@michaelwestmoreland2530]

I don't understand how the ATF can loose it's collective shit about pistol braces and binary triggers, yet THIS slipped out and left the drawing board.

[@TASKConfusion911]

HONEY? WHERES MY MILWAKE HIGH SPEED CORDLESS DRILL?

[@GY6vids]

😎👍🏼

[@shawnmatthews5118]

You played the intro to Land Down Under at 1:49....

[@GY6vids]

?

[@trollwaffenunit1garrison784]

@@GY6vids he's talking about the intro to a song called "Down Under" by Men at Work, which it does kind of sound like for a sec lol

[@Halboutit]

okay... now try to combo it with a binary trigger.

[@dilfbag]

🤘 😁 🤘

[@hbbremton870]

It’s accuracy by volume lol 😂

[@morganfreeman4335]

Now use an impact driver to crank it😂

[@JuggusNawt]

If you were to mount this to something....

[@GY6vids]

It would be pretty rad!

[@EricDaMAJ]

Nice range toy.

[@MrRoob420]

Remove the crank and see what a drill can do

[@social3ngin33rin]

Lolololololol this is ridiculous but I want to play with it, probably with a bipod or resting on something. Idk how it works but i have a good idea to make it shoot extremely fast lol

[@Ryan7456]

what the fuck? with that stability what is the actual use case for this other then accidentally shooting a window out in the next county over?

[@eric81872]

☺♥

[@joshthompson5411]

Anyone try this with the cmmg conversion kit?

[@GY6vids]

It would work

[@brylythhighlights4335]

Wait these aren't machineguns? I thought crank handles where machineguns :P

[@truly_I_say]

Who's putting that in a drill?

[@kevinle5810]

Put a brushless motor in it and you'll have a fastest and accurate machine gun in the world 😁

[@jonny-nava-367]

What if you put it on a machine gun, function-wise, not legal?

[@KelzCasa]

Novelty factor is great, but I wonder how the alphabet boys feel about it.

[@GY6vids]

Who the F cares

[@youtube.commentator]

Binary seems faster

[@F-BOMB]

How long until someone mounts an electric motor to it...

[@libertykrueger1433]

To all my peeps in MA, keep in mind that our overlords here have made possession of a ‘trigger crank’ a life in prison offense.

[@richrhocks]

Cool but too expensive

[@masterk5066]

I wonder would this work paired with a binary trigger 😂