The fully built Camry in now ACTUALLY FULLY BUILT!!! (Bc 272 Cams, ferrea 1000hp valves)

I hope you enjoy the video please like , share and subscribe 🙏🏾, if you have any questions please feel free to comment 🤘🏾

[@donovanharper9620]

Love the build ! I got a 2002 Camry looking to to some of the same things as u

[@ShaneVlogss]

Thanks so much!! Yeah let me know what you’d like to do and i can help you for sure

[@sethmichael8552]

Woohoo! Lets gooooo!!!! I want to see it run!

[@ShaneVlogss]

Thanks!! And hell yeah this week imma have it run and record it all 😈

[@modifiedvai5975]

Glad to see you're still at it! I was a huge fan of the gen 3 camrys and had a massive build planned. Now I have a 2002 and I'm considering it once again. weight reduce it and swap your bushings for polyyyy!

[@ShaneVlogss]

Sick so now you have a gen 5! And can you link me to the poly bushings ???? I really wanna buy them ASAP

[@markpenney4612]

@@ShaneVlogss www.proimporttuners.com/parts/toyota/camry-whiteline-bushing-sets.html I never actually looked yet and sure enough it's not a common thing but these rear end units are white line and not poly but probably still nice.

[@ShaneVlogss]

Thanks imma look into it

[@2az-2ez]

Keep it up man i am looking to turbo my 06 very soon

[@ShaneVlogss]

Thanks man 💪🏾 and that’s dope let me know if you need any information 🤘🏾

[@2az-2ez]

Will do your videos will help tremendously keep up the awesome content

[@tinuthomas531]

Damn I was actually planning on getting that intake manifold because mine is cracked, I love that I can get feedback from you on how it is

[@ShaneVlogss]

That’s great I’m glad too because all the videos that i see on this intake manifold are not informational at alll , and i finally get to try it out After looking at this intake for years

[@artlessoutlaw7055]

This awesome bro I can't wait to see it run im about to do some mods to mine just recently did my o2 sensors valve gasket and spark plugs and now I want to do coilovers and wheels and tires

[@ShaneVlogss]

thanks man !! and that's dope you're car is going to sit nice and feel a lot better with the coilovers

[@LuisTorres-sh2zx]

crazy how far your car has come man, hope all is well!

[@ShaneVlogss]

Thanks 🙏🏾 and yes all is well 🤘🏾

[@GabrielDunkin]

YESSUHHH🔥🔥🔥

[@ShaneVlogss]

🙏🏾🙏🏾🙏🏾

[@GreenLeavesGrower]

Just got a 2005 camry XLE . Thinking about throwing an exhaust on it at the least , it comes stock with 210 hp and 220 lb of torque for a damn camry

[@ShaneVlogss]

thats dope bro! you have the v6 if you put an exaust on it or even just cutting the muffler off its going to sound really good

[@GreenLeavesGrower]

@@ShaneVlogss Yeah your build is dope bro . I dont know how much ill end up doing to my car overall, but I think the exhaust is going to have to get replaced at some point in the future anyway . I was seeing the MagnaFlow exhausts sound pretty nice

[@octanemayhem2686]

Coming out sick. You should do a walk-around spec video of the car and everything that's been done when you get it all back together. And or maybe a build compilation video. I got those BC coilovers ordered im gonna do a video for the install on mine. Check it out soon.

[@ShaneVlogss]

Thanks so much!!!! im glad you love it, yes i do plan on doing a walkaround video as soon as my car is driving 100% for sure, and then right after that i will most deff making a video on how much it cost me to build my car. i was suppose to do it after my first tune, but i knew i was going to be getting upgraded parts. so yeah defgoing to be doing that so stay tuned lmfao

[@octanemayhem2686]

@@ShaneVlogss If have a few min check out my Camy. Lmk what you think. kzbin.info/www/bejne/oKjIdHZ7jsesars

[@AllenSpec]

Great progress

[@ShaneVlogss]

Thanks bro!!

[@Sir_Shep_Alot]

When you bought the weapon r intake manifold, did it say that it was for the scion tc and tried it on your camry anyways? i'm trying to do a similar build but im hoping to make sure that im not buying the wrong items. Sick car man hope you keep making content about it.

[@ShaneVlogss]

Yes for sure this first great for the Camry , almost all 05 Scion tC parts fit for the Camry , but for sure i actually bought it off a Scion tC owner and i had to pull the manifold of his car and put it to my car so it’s dos fit perfectly

[@lanetokie2184]

Is there any way of getting the wiring diagram for the greddy e-manage blue. Having trouble finding a ecu harness diagram to splice in

[@ShaneVlogss]

Sorry for the late response but no I’m not sure we’re to get that from , my tuner was the one that wired it in for me

[@xaviermccree2940]

It cool bro my motor blow in my Scion tC it been a year on my car been on the road

[@andymairena3221]

I’m sorry to hear that how fast were u going what happened?

[@methodical_66]

@ShaneVlogs Are you considering sleeping your block, so that you can run more boost?

[@ShaneVlogss]

Yes i do plan on sleeving a second block and upping the boost for sure but first before all that i wanna upgrade the trans with an lsd and upgrade my ecu and do wha to need so i can up the boost for next tune to make 500 then I’ll have a built sleeved block sitting until i blow this one up 😂

[@methodical_66]

@@ShaneVlogss Consider going E85 or being able to switch betwewn two fuels. That way you can play with the timing more

[@ShaneVlogss]

Yes once i upgrade to the haltech ecu and go flex fuel 100% yes most definitely running e-85

[@jazzpants7679]

Plz post where you get your stuff from in the description

[@ShaneVlogss]

yes in a few weeks i will have a full video on how much it cost me to build my car were its at and a " FULL LIST" of alll of the parts that i have installed STAY TUNED!! lol

[@jazzpants7679]

Youve also inspired me to turn my camry into a sleper since I have the 2azfe engine I first have to replace my pistons and piston rod connectors

[@WaynePeeples]

Great vid champ... im still following ya homie!

[@ShaneVlogss]

Ayeeee hell yeah! 🤘🏾I’m glad you’re still sticking around watching the build 🙏🏾

[@2ndsam302]

👀👀👀 clean

[@ShaneVlogss]

Thanks 🙏🏾

[@jyshonjohnson416]

Where did you get your lights and bumper from

[@ShaneVlogss]

I got my headlights from eBay for about 100$ type in , 2002-06 Toyota camry black housing headlights

[@doublej1506]

I have a 2005 Camry for like 3 months now what mods should I do to it my G ? BTW BADASS BUILD

[@ShaneVlogss]

🙏🏾 thanks 🙏🏾 and that’s dope how do you like the car ? I think it’s hella comfortable lmfao , and i would start off buying coilovers if you want the car to be lower so then you can get some nice rims for it too

[@mattmayo3744]

Where did you buy your cams? Thank you! 😁

[@camtheman2005]

Really like your build man, have been considering a 2az turbo for my MR2. What is the turbo you are using?

[@ShaneVlogss]

Thanks man i really appreciate it 💪🏾 that would be a sick build. When i was starting to build my car i heard that many people use the 2az in there mr2 also in their lotus as well , and the turbo I’m using is the borgwarner s300sx3

[@theredv7195]

What's the link for the cams?

[@ShaneVlogss]

Here’s the link briancrower.com/makes/toyota/2azfe.shtml

[@andrespulido3177]

What’s your wheel specs? Just ordered some BC Coilovers lol

[@ShaneVlogss]

Dopeeee i want to get bc coilovers or d2 coilovers , and my wheel specs are 18x9.5 +35et

[@andrespulido3177]

Fasho. I’ll keep you updated on my build. Yours is pretty dope ngl

[@master6435]

What's the radiator your using?

[@ShaneVlogss]

the radiator im using is the stock one. reason being is because the way my turbo sits i have no space to upgrade to a thicker aftermarket koyo or mishimoto one

[@aidanjohnson9968]

i got two questions 1 can i get a link to a cold air intake for a 06 camry and 2 where is your battery

[@ShaneVlogss]

ok to answer the first question i dont think we have a custom cold air intake but the intake i had was an hot air intake but it sounded nice and the throttle response was a bit better :tinyurl.com/y5cgpcke and answer #2 my battery is located in in my trunk haha i relocated it a wile back

[@donovanharper9620]

Can u drop a link for the coil overs

[@ShaneVlogss]

The coilovers i bought were on eBay: Cx racing coilovers 2002-2006

[@chiefzaydoe1466]

I have a 01 V6 Camry any tips or anything you would recommend with mods ??

[@ShaneVlogss]

Ayee for your car i would suggest coilovers and a cold air intake at least to start with

[@chiefzaydoe1466]

@@ShaneVlogss Currently have A Injen cold air intake with Headers & Bc coilovers. Anything else ?

[@colslw760]

@@chiefzaydoe1466 just keep it stock and enjoy the v6 power. Maybe an intake manifold too?

[@TheBikemaster94]

@@chiefzaydoe1466 performance brake pads , maybe sticky tirez and a Flowmaster . 🤠 That's what I'd do

[@50dimensions]

Bro I just bought the same car.. I want to add the kit you have where did you get your kit from and what is it called ? Plz respond soon 💯💯

[@ShaneVlogss]

Ayeee great choice !! I got the kit on www.lgmotoring.com it’s one of the last pages, i was the first one with this kit and i worked with the fabricator to help produce this kit for all my subscribers 💪🏾

[@ForecastingBrid]

You got a SI daily 👀👀👀

[@mrrazard]

I have a bugeye wrx daily and a blue 03 Camry lol

[@ShaneVlogss]

😈

[@ShaneVlogss]

That’s dope!!

[@seanandrew2823]

Really?? A FIFTEEN sec unskippable ad?

[@ShaneVlogss]

Omg let me fix that , KZbin is messing up

[@ShaneVlogss]

Let me know if it’s fixed?

[@seanandrew2823]

Its ten sec not as bad... Sweet car tho i just finished swapping my 04 camry solara to manual turbo next

[@charmcitysk8er]

@@ShaneVlogss it’s not even that bad he capping

[@andymairena3221]

Do you have Instagram?

[@ShaneVlogss]

Yes i do it’s @shanelewiss