The FUTURE Of Beyblade X!? || Gimmicks, Concepts + MORE!

[@hertzburst]

Definitely looking forward to seeing how the system changes in future years! Thanks again for showing off my concept!

[@eduardoangelico717]

Hey dude, I would like to know, where do you make your designs for concepts? Dran Saber ended up being very cool, like your other concepts

[@louistech112]

Bro I can see them going with your design

[@MrRed-le4ek]

I’ve had this idea for a very long time ever since CobaltDrake and Team Pendragon. So you know how Pendragon’s Beys are a reference to Bakuten Shoot. What if the next antagonist rival teams for season 2 and 3 are references to Metal Fight and Burst in terms of protagonist beys (Pegasus, Sagittario, Valkyrie, and Spriggan). And then for season 4, the penultimate antagonist team will have the primary antagonist beys from each generation (Zeus, Nemesis, and Lucifer).

[@NoburesuOburīju4949]

Sounds pretty cool

[@MaximusOverdrivusSupremusVT]

Actually, I think it would be better to do Valkyrie and Longinus for burst, But make it Pegasis and L Drago for Metal Fight. L Drago won a recent poll anyway so... 🤷‍♂️ They absolutely HAVE TO MAKE IT. It wouldn't make sense for them not to

[@MrRed-le4ek]

@@MaximusOverdrivusSupremusVTThey are remaking L-Drago, but what I’m talking about is that they should make beys that are “inspired” by the likes of Pegasus, Spriggan, Zeus, etc (and with their own special symbols just like that iconic Bakuten Shoot logo). So similar to Drake and Tiger.

[@Eric-y9i5u]

Don’t forget about the best Beyblade, turbo achiles

[@Coolio_Ash]

I really hope there are more components introduced in the future. We're only NOW getting gimmicks in bits and spin. Kinda crazy. I really hope there's some big changes in the system

[@nuc]

It took a few years for every generation to start going really heavy with gimmicks and such. We prob won’t see anything too wild until maybe season 3? I’m hoping it doesn’t go overboard though.

[@copingflower1909]

In general this is a great generation for kids who didn't get to grow up with Metal fight, and having all metal beys back in general leaves a warm feeling inside since I absolutely loved Metal fight as a kid

[@hushu1414]

They are definitely doing fused ratchet and bits as a new series gimmick

[@lloydfs5114]

The anti bit-release bursts lol

[@Kaidhicksii]

I hate those.

[@meemosteeno5121]

​@@lloydfs5114 that's kinda already a thing since attack/balance type bits have thicker bits, which makes them harder to burst

[@lloydfs5114]

@meemosteeno5121 they can still bit burst so not really

[@That0neJawn]

I honestly just want the power creep to be as slow as possible. Some material innovations for ghe bits would be fine though- I think the ideal attack bit might be POM rush. Same as rush, but with less friction.

[@Tuesdayz]

for real i hope this gen doesn't introduce blades that are way heavier than they are now

[@ciaojay7025]

And it goes smoother over time

[@NerfMason]

I think it would be cool if they did custom ratchets like how they did engine gear blade based in g revolution, like more customized so a 3-60 for Dranzsword could be more specialized around Dranzsword’s contact points. Like how dragoon g’s clutch base was different than Driger g’s. Kind of like how variants work for beyblades.

[@mason4354]

I still don't completely understand how the ratchets work, also, BuffMason 💪

[@YeetNation2006]

An angle compass would actually be a really good idea. It could help keep your launch angle consistent, say you find an angle that works really well, you can remember what it looks like on the compass and recreate it.

[@MoleculeMind7]

I like to think we are still in the manga promo single layer era which doesn’t usually get a TV adaptation. There really haven’t been many fire releases yet

[@RaffyPoohh]

I like the idea of a Metal Ratchet just to give some of the lighter beys more of a fighting chance. A lot of cool designs just fall to the wayside because they're not heavy enough right now and that really sucks.

[@Eric-y9i5u]

Metal ratchets May be too op, but Ruber with burst resistance…😈

[@BigYabai]

if the plastic part of the blade gets separated, I hope it ends up like the Spin Gears of plastic gen perhaps 'attack rings' could have restrictive slot geometry, so more rounded ones like Hells Chain or Wizard Arrow have could fit both left and right spin gears, meanwhile ones that are more jagged like Dran Sword or Phoenix Wing would only fit spin gears for their intended direction this could open the door for way more unique dual-direction blades with different strategies for each direction. They could also implement weights into the spin gears so you could pick one that has balanced, imbalanced, compact or wide weight distribution depending on your build. They could even implement a gimmick with a coil spring that you wind up and triggers by the bit hitting Xtreme Line and creates a burst of speed like the Engine Gear spin gears in plastic gen. Beyond that, I'd also love to see ratchets get more variety and gimmicks, and I'd love to see rubber grip bits or ball bearing bits.

[@thehybridprince]

Some of the biggest things I want are Metal/Rubber Point, weights for the grip, and an official long winder that’s similar to the Dragoon Winder from Bakuten Shoot

[@voltagestorm1787]

They could do some funny things too, like I have this idea for an "Arsenal Phoenix" where the blade is kinda oval shaped and when launched will detach 2 microbeyblades that will make the battle more interesting. Definitely would be bad competitively, but very fun

[@DarkKirby8976]

Metal Ratchets would be a bit of an issue where what if they ended up damaging other Ratchets...

[@nuc]

I feel like ratchets hitting eachother is much less common than blades hitting ratchets. Even now ratchets get chewed up because of blade contact. If anything… metal ratchets would help.

[@jackyshek9912]

@DarkKirby8976 ​@@nuc Sorry for the large text in advanced, I disagree with the idea of metal contacts on rachets since the locking system requires the outer plastic part of the rachet to move. If you look closely when you unlock the bey (especially on balance/attack bits) this part bends due to the white tab pushed out from the bits to create resistance which is why it is plastic and not metal. If it were metal fused with plastic, the rachet would probably break faster than a fully plastic rachet or defeat the purpose of bursting. Jake, I think metal rachets would be nice but from an mechanical engineering/economical standpoint it's much more ideal to have the clear part of the rachet metal for weighting . Also I think this generation is very interesting since the bits will probably be unable to incorporate gimmicks like burst drivers (we could see bits/rachets fused to accommodate space for gimmicks like these). I think what they'd do is focus on the physical design of layers until the second season where we may see layer gimmicks/customization.

[@DarkKirby8976]

@@jackyshek9912 Rubber contact points would make a good cushion for the ratchet by taking a page out of Rock Zurafa's books cause Rock Zurafa has the R145 Spin Track

[@MarshmallowHope536]

Adding metal definitely seems like the best thing they could do with ratchets. One big flaw I’ve seen especially with tall bits and ratchets is that because all the metal is in the blade the center of gravity is too high to the point where if it loses its balance and tips over then it won’t be able to upright itself. So adding metal to the ratchets or the hollow inside of the bits would help with this problem.

[@StiagoYT]

I put duck tape on my launcher lol

[@jmreviews3734]

They should do magnecore for beyblade x. I think that would be awesome to see and of course engine gears

[@Primallunacresenteclipse]

5:21 I hope not

[@QuazarQZ]

I find it funny that this video accurately predicts Samurai saber

[@KiritoandNash2022]

I feel like the Future for Beyblade X would be like this. You will see some Beyblades with Steal Spin abilities (Previously on Metal and Burst gen) you will see a Duel Spin Beyblade that can do both Left and right spin IF were lucky we can get an unburstable Beyblade that includes a 0 rachet making it impossible to burst no matter what and we can get some collaberations beyblades. Think about it the last collaboration beyblade was Hello kitty and that was awesome but it was limited so imagine a Beyblade X Hello Kitty Beyblade. If they want to go big they have to collab with some more things like what hasbro is doing with Transformers Beyblades. The future of Beyblade is in both Hasbro and Takara Tomy. Don't screw this up Hasbro and we will forgive you

[@Neximatez210]

Those would be interesting in Beyblade X, but let’s just hope that it’s not overused like it was in burst. We want the beys to still be equal and have the ability to burst. If there are so many X Beyblades were super overpowered, the game wouldn’t be fun anymore.

[@KiritoandNash2022]

@@Neximatez210 Yeah your right but it would be cool if they do those ideas I mean they don't want it to be like Burst all over again. The only way it could not be like Burst is if it has amazing abilities like very fast stamina or maybe a Super Fast Beyblade that you have to master the movements but overtime you can awaken it and make it even faster but I doubt that would happen as it would be SUPER DANGEROUS

[@Damianwindmill]

@@KiritoandNash2022 I can see them doing something like they did at the end of Metal Masters with Twisted Tempo, with a stamina beyblade that has no sides on the ratchet, so it’s impossible to burst, with a bit like metal ball. That would be hype, and it’s only one release so it wouldn’t change the game so much to the point where it gets boring.

[@KiritoandNash2022]

@@Damianwindmill Yeah and I can see them doing something similar to Maximum series with each Beyblade having some interesting gimmick like the heaviest attacker or tallest Beyblade or something like that

[@chaomaster100]

I do think being able to experiment with more materials or even just more dynamic shapes would help Beyblade X a lot. My only concern is with the longevity of Beyblade X because of how TT likes to advance systems, I feel like they've kind of pigeonholed themselves with how the current designs are. Blades can't be divided too heavily without running into the previous problems you mentioned, ratchets can't be more dynamic because they're needed for the burst mechanic, and bits can't be overly dynamic either without ruining the xtreme dash gimmick. I'm sure they have some ideas but I'm not sure how they can make any bigger advances after another system or two.

[@Ghost16-k5n]

I think changing up gimmicks could be well done if there are different rulesets for different ratchets for example. If a certain type of ratchet is less prone to bursts then maybe they have to compete with same type or offer point advantages. Idk but I think diversifying and customising would be cool even if it changes the meta.

[@peeko1599]

we need the quest bit

[@NightSpeed458]

NOOOOOOOOO NOT QUEST!!!!

[@whitelatex]

oh my god that would be amazing! imagine an x ​​dash with a suck tip, they are eguies style or rather a tip that is a wheel like one of the burst tips!

[@whitelatex]

Just for the joke, they almost made a tripio Japanese people are crazy, they're going to make one hahaha

[@MDFarro2010]

Easy extreme finishes if it’s in the Center

[@jacobmccown7714]

I really hope they don't split the blade into multiple pieces! I always hated in beyblade burst when one piece would fall off and just litter the stadium. Beyblade X is handling the burst feature perfectly in my opinion.

[@regulusking4299]

The ratchets are kinda in a similar situation as spin tracks in MFB. A lot of the basic spin tracks that were just height were so similar. But it did give unique spin tracks here and there like claw and horn 145. Beyblade X would be harder to do bc it has to hold the bursting gimmick. But they could shape it to have rollers or spiral shape edges. Give it some uniqueness outside material changes

[@last2nkow]

it would be cool if we got some more gimmick-ey Ratchets. like some of the old beys from previous editions with bits that pop out, or change their shape with spin force or something. id love to see unique shapes, like some attacking ones with metal wings or interesting rubber fins for shock absorbtion

[@fnf_n00b61]

What im thinking is layer gimmicks such as moveable parts sticking out for more air control or more speed in the stadium. They could also use the ratchets like a open part ratchets or like metal part ratchets. Bits will be too complicated to use because you will need to extend the base of the bit.

[@BladeBeyX]

Engine gears!

[@ADas-vj3ib]

I hope that there will be mode changes in X

[@theofficialbgame]

if they are really pushing this as a sport, customization is going to take top priority, you made solid points about using different materials for the bits and ratchets. so yeah P1-60(plastic) R1-60(rubber) M1-60(metal) etc etc... they would have to do that for every ratchet and it would take a long time to launch in waves which is a drawback, but for right now the easiest thing to do is make sure every bit and ratchet has the same colors available as theres a few that dont have a certain color yet. like maybe i want a black out drandagger with a black 1-60 with a yellow quake. blades are easy as majority in boosters have multiple colors. so again that can also drive sales for more boosters for them with maybe an incentive of something new included

[@drunkenskunkproductionsdsp8094]

I think the next major gimmick for X would just be the blade being able to split into multiple parts like in 4D and Zero G, but that might need a secondary locking mechanic to get it to work...

[@jotaemept99]

A stadium with 2 extreme lines. It needs to happen!

[@MDFarro2010]

How would that work

[@nmr7203]

This aged well

[@jotaemept99]

@@nmr7203 Well not exactly the one that'll be released soon. I'm talking about one with two symmetrical sides of the rail, 4 over pockets and 2 xtreme zones. I call it the Ultimate Xtreme Stadium.

[@miguelcrafter2997]

I hope that the stadiums change too, like in Beyblade Burst turbo/choZ the stadium had rails that went fully out of the stadium to get much speed Or even a stadium with a spinning motor like in sparking/surge

[@gengarultimate]

I think a single hyper defensive bit with no gear teeth would be cool as long as it’s done once then maybe again once or twice in a few years but that’s it and it’s whole point is that it’s sacrificing all attack potential kinda like quest but not actively unusable

[@graphitebendy]

Some ideas I had for the rachets R3-80: very similar to TR145 from Metal saga P5-60: similar to Paradox: one mode give stamina in exchange for defense and vice versa. W4-70: wider prongs for more weight added B1-60: has a bit of a bound gimmick where it can be pushed to an extent and won't burst, but any further, and it will.

[@multivewer]

I totally agree with the ratchet and bit parts, but i don't think they need to change up the blade much, at least start making them like differently shaped like not as circular all the time like maybe some more recessed surfaces for like a kind of imperfect circle

[@yusheitslv100]

Hopefully, we will get the HWS treatment, but given how the ratchet serves the purpose that layer teeth/slopes did for Burst, idk how it would work.

[@jaars.7532]

It would be better that they implement gadgets or pieces that can be added to old x beys so they can still be uses in meta or so they dont be taken away so fast

[@bxnny5861]

i saw a video talking ab future beyblade x gimmicks and stuff very similar to this one, and he showed a plastic gen bearing and i think it'd fit really well into x, since the one i saw was kinda not very wide, it kinda looked like needle but it spun

[@tariniamidaala8419]

I have an idea for a gimmick/system in the future where they scrap the gears and the extreme line and replace it with a magnetic type system where the magnet inside the bit plays a bigger part than just providing weight and having it attract the bey to do an extreme dash

[@tariniamidaala8419]

This will make it easier for defense/stamina types to do an extreme dash and it could make way for the driver gimmicks of burst. It would make an extreme dash based on spin speed not type advantage

[@switchbro6622]

I feel like metal rush would be good as the whole thing with rush is that it preserves stamina during extreme dashes and metal would have less friction and have more stamina so it would have a lot of stamina

[@Sunrust]

hasbro is more profit oriented than safety tbh

[@a2lan123]

Instead of the hybrid wheel, what about an fully customisable blade? Like, many pieces you can use to make your own customized design, and they could even not be limited to metal. Having the ability to make your own design would make for a great final season.

[@BigYabai]

would be too fragile

[@CalebGonzalez-tb2id]

The only way we can get new things I personally think is up to the one who is writing the manga of beyblade x it all depends what ideas his has for the manga and the bayblade I think they usually go by the ideas of the manga creators

[@zeroxenoverse9251]

With the balance and attack bits having a resistance. I thought a rubber ratchet can even the playing for the little to non resistant ones like ball to where it's only meant for them.

[@aaronanderson3621]

Can’t wait for the left spinning bey’s picture to be ANOTHER dragon

[@lotusaqua3137]

Correct

[@zixise]

We'll definitely see something like 4-60 custom at some point

[@TheArtistWizard]

My idea is that we can remove the gear chip and the prongs on the bey can move and lock to lock in the newly added gear chip

[@JaceAkin]

When are the beyblade x season 1 releases ending

[@nuc]

July should sorta be the end of “season 1” if its like burst but… since the anime didn’t start until October then THAT would be the end? Honestly im kinda confused

[@MrRed-le4ek]

@@nucSeason 1 will end around Fall (September or October) based on the leaked product line from Zankye.

[@aaronanderson3621]

I hope one of the next gen of x beys has a tornado wyvern gimik so that an xtreme line attack rolls of and send the attacker to the xtreme finish zone

[@TheRedStinger82]

Funny one piece joke at 1:31

[@MindcraftMC]

I really did not expect that one

[@ciaojay7025]

UHMWPE Needle or ball might be nice. Smooth material and less prone to breakage

[@HardMODE-]

I hope they do more of a burst god kinda upgrade where still 3 parts just more unique

[@last2nkow]

i would just love a chip on top so i can switch out the sticker in the centre of the bey.

[@anthonymonaghan4964]

i wanna see a Bit like Metal Saga's Coat Sharp tip

[@Beybladebro824Z]

Will we get new heights like 4100 or 9-50?

[@essencegames3168]

I hope they keep them around the same size so we can use the og year 1 beys still years later burst up sizing was really annoying

[@triview129]

Will they do gimmick like bakuten shoot, metal fight or burst

[@triview129]

I include every season like g revolution and shogun steel

[@wendixon_official]

I really want to see a Fantom Orion remake

[@RLB4448]

I'm scared of that M3-60 rachet because the small metal contact point of it has a possibility to fly on my face and is the left spinning beyblade gonna use by Kamen Y? i know its not but...

[@BlueDasher13]

What if they started making unique upgrade rachets for some of the beys wing 3-60 rachet for Dran Sword as an example And the wings are rubber tipped on the front for harder hits

[@Kaidhicksii]

More customization. More unique stuff. Yes.

[@blablaroarwwe]

I don’t think splitting the blade is going to be a good idea, I mean what will be the purpose of it. In Plastic and metal gen they were 2 parts (The face and the Fusion wheel is the same thing tbh) since the beginning. When in burst they did turn the layer in 2 parts it served a huge purpose instead of making a person happy, the beys had different burst resistance and that could be changed but since the burst system in X is redesigned it can’t be done. We even saw the splitting of blades be even more useful in DB/BU as savior core giving every layer bound gimmick, guilty core adding more weight, belial’s burst stoppers

[@BigYabai]

because they could make the plastic part act like a spin gear, determining spin direction and having gimmicks in it like weight distribution or engine gear like gimmicks with a coil spring

[@XACE_BLADER]

Man if they add bound gimmick or springs to these beys like the Valkyrie beys it would be insane!

[@nuc]

That would be interesting.. I wonder how they could do it with the x system being metal.

[@BigYabai]

Could do it like Bound Defender from plastic gen where there was a springy soft plastic sub-attack ring that would absorb recoil from hits

[@MDFarro2010]

What other ratchets can we get

[@dvrling3611]

Wouldn't a rubber ratchet make it easier to burst

[@ryancrail2145]

I swear the left spin blade is just gonna be a left spinning launcher

[@vers-over1886]

What the difference between ux and x beys?

[@nuc]

UX is a different sub-line. Really the only difference is the metal in the middle is plastic so the balancing is different.

[@vers-over1886]

@nuc is it like more competitive use?

[@nuc]

I wouldn’t say competitive has anything to do with it. Just a slightly different system design that TT pushes as “unique”

[@DeAndreALGOOD]

@ilinnuc did you see the dran dagger 2-80 gp

[@crypticmoviereviews]

I’m hoping for bigger ratchets akin to BD-145 and as for launchers I want something like the burst trigger

[@ChilaAuroraVT]

Rubber ratchets when?

[@Amir-yg3md]

My biggest hopes for x are that they make the layer shapes more unique and not so round, but like you said it could be dangerous. Also i would like to see a single blade on a different bey than just on dran buster. The reason for that is i kinda find dran buster a lame design like it doesn’t give that cool design of a bey. Also i think they should add different shapes to the bey like a square bey, a triangle shaped bey etc. basically to make x at least something special accept having metal on it and going super fast on the stadium. Same gose with the layers. Im okay for a few to be the same character but not make anymore then 3 different designs for a bey. cuz i could get pretty Boarding in my opinion. I saw your title with dran with 2 blades and i really hope that’s not real, cuz the main thing about beyblade in my opinion that you have different shapes and characters on a bey and it’s something that should be kept instead making 5 6 bladed bey design and butting later dran on the shape. but im okay with evolutions but making more beys then a bey being on random booster that’s my biggest hope.

[@nolovedre8455]

We need the blader and bey bond lol fr 💯

[@BryceWeaver-s5e]

So we not gonna talk about the bucket stadium?

[@aidenlegobatman]

How about a ratchet-blade hybrid like Nightmare Longinus?

[@ValTek_Armory]

I want a blade with rubber integrated. Give me my revival of L Drago

[@ValTek_Armory]

paired with a POM bit, I think it could be good

[@astrangerontheinternet5500]

Kinda curious if you bought any other Raise Buckle from Geats. I recently got Beat and Boost MK9.

[@nuc]

I haven’t yet. Im waiting on the plosion rage buckle :)

[@astrangerontheinternet5500]

@@nuc I love Buffa but I still haven’t seen the movie with Plosion rage yet 😅

[@S1erra107]

The nostalgia project better do Variares or I will cry

[@avabenner9813]

Are you going to be talking about the transformers and beyblade x hasbro collab?

[@nuc]

Eh, I will at a future time.

[@chimeraindustries]

I want more remake, GIVE MEE MOAAAR

[@jessewhite1679]

Metal disc ball will rule all..

[@0w0MarshiMell0]

Yeah let’s rip 0ut the stamina tank c0mb0 with left spin X-treme attack

[@izzyshaath1671]

I hope L drago is the left spin bey get announce in beyblade x

[@MythicalNinjaBeyz]

They need to bring back chips

[@rhunejanssens1549]

Metal on ratchets would be bad if they come into contact with plastic ratchets cause the plastic wil break

[@stevenrankin2788]

Metal ratchets would be cool , would consider a two piece blade but that might be a negative not looking forward to left spin don't know why but it bothers me

[@Thedramajackson]

I REALLY hope X only last 3-4 years. Burst was just way too long imo, and I hope X doesn’t constantly change protagonists like every year or two.

[@EG80]

Ratchets are boring because they're going to really expand on it later. I'm speculating btw, what does everyone else think?

[@triview129]

À could gimmick to add could be marble, it could be on every part and for any purpose

[@nmr7203]

7:40 that'sbnot true. You can literally just make Beys that ignore the xtreme lime gimmick lol

[@spriggan93]

rubber flat maybe?

[@TippedCombat]

I agree with a lot of things in the video. But I think beyblade x is good just the way it is now

[@brunovaleriomp4]

Fan Beyblade name: DRAN X-CALIBUR

[@bgcustoms3124]

It sounds like your whole wish for the parts is to make things more rare and difficult to get, and then for the whole blade in general is basically the same power creep that happened throughout burst where basically by the end, all of the parts that you'd bought at the beginning or earlier in the generation were basically useless by the end due to increased size weight and gimmicks. So I can't personally fully support these ideas.

[@animosus6317]

I hope that the can do something similar like what they did with shogun steel. Shogun steel in my opinion had a great system to make your beyblade unique to you.

[@nuc]

Yeah shogun steel was cool in concept… but it allowed beys to get SO heavy and that was bad for the meta I think… definitely underrated though.

[@lechampion4278]

If they want it to become a “sport” they can’t be to gimmicky with anything

[@kaoru288]

i dont have a 3D printer but i am wondering as to how a free spinning gear bit would feel like. shitty gimmick, for sure. but hey. anything goes for beyblade. Also Takara should go back into giving Plastic-gen type of accessories a chance. those spring-loaded launchers that in theory gives you more launching power looks pretty badass.

[@BDSFormula1]

rubber rush

[@Eric-y9i5u]

Shut up, turbo achiles is the best Beyblade in the world

[@nebplayz9173]

Nope the newer Achilles are better the Achilles line is the best beyblade line

[@dallinlowe2627]

Hey design idea: similar to metal fight, but no face bolt. There would be an energy ring that also has the bey’s character art in the middle. Next is the metal/plastic blade part that makes the most contact. Then a core that touches the energy ring that can be different designs like in metal fight. Lastly is the tip that would go through all the other pieces and connect to the energy ring. No pieces flying apart, and limited metal on the blade so if it does bounce out, no one is getting seriously hurt by it.

[@LoneWolfInsane]

The biggest problem with bayblade x are definetly the rachets. Compared to spin tracks of metal fusion they are so boring

[@yusheitslv100]

Unfortunately, it doesn't look like there's enough room in the design for ratchets.

[@BigYabai]

They could do something like the clutch base on Driger F in plastic gen. The bit spins freely from the rest of the blade, only balancing on the gear chip so as not to loose speed from recoil, but then the ratchet can clutch the bit when it impacts the Xtreme Line in order to transfer the speed of the bit to the blade