The HighGloss Black Aerokit Porsche 992 - 911 Carrera S Installation!

[@johnjacobs9753]

Great video! For those doing this mod, you can actually skip the step associated with removing the individual fins on the active aero. It isn’t necessary and it’ll save you a lot of time. It took me 20 minutes to tear the rear apart and about the same amount of time to reconstruct the rear (not including de-pinning/re-pinning). I spent the time de-pinning the 8-pin harness and it’s a waste of time. You’d be better served to just cut off the 8-pin connector, crimping new pins to the 7 wires and inserting into the 14-pin connector….OR….cutting off the 8-pin connector, cutting the 14-pin connector off of the original base, removing pin #1, and splicing the wires (they are all the same colors, so very easy to match up) and shrink wrapping them. I used the latter method because the connectors were back ordered and I wanted to get the install completed.

[@davidd2434]

Nice video, I did the full aero mod to include front and rear portions. There were a number of fault lights which needed to be cleared to include the rear brake and old spoiler deletes. Outside of that I congratulate your new vision, it looks great.

[@carlnorrbom]

Amazing piece of kit - absolute dream car. Looks so much more aggressive with the Aerokit on.

[@SveltoPerformance]

I would agree

[@denychangy7386]

excellent video seriously. Thanks for showing the whole process. Aero kit really transforms the 992.. It is gorgeous,Congrats!

[@minimcewen]

I really appreciate you filming your build of this car. It's helped me with similar mods on my 992.

[@SveltoPerformance]

Glad it helped you!

[@geterdunn2733]

Good video clip and it does make the car look much better. I’m going with the same kit for my 2024 -911T

[@thetruthspeaker1978]

Cool..😂😂 I'm catching up on this car . The wing gives it a 991.2 GT3 vibe and that's one of the best looking 911's IMO

[@aaronthomas2655]

Looks great, i think you should de badge the silver logos or get black ones.

[@ravishambanna]

Hi Paul, thank you for your video, great work. I am commencing my project on a manual MY24 Carrera T. You did mention in your video that you found a manual or instructions on the internet. Could you plz share the link? Greatly appreciate your assistance. Keep up the good work which inspire us.

[@mauriciocaceres1194]

Looks amazing 👏 congrats

[@SveltoPerformance]

Thank you!!

[@davidgillan8678]

Great video, Very nice seeing the work, One question on this, Did you need to get the car re-coded to accept the Aero wing, I've just had mine done and I get 2 errors due to the adaptive functionality, One at 50mph and it reports a spoiler fault and the other when you are around 70mph advising spoiler failure Slow Down. I've had to book into a OPC to get the car re-coded to get the aero wing to function correctly.

[@pkancel5623]

I know this car is long gone but if you get this message, may I ask what you did about coding out the active wing once you installed the fixed wing?

[@SveltoPerformance]

I had to send it to Porsche to do it.

[@AlterZgo]

Paul - Question re: the front lip that comes w/ the aerokit wing. Did you install that front lip onto your non-sport design front bumper? Does it fit? Or does that front lip that comes w/ the aerokit rear spoiler only fit on a sport design front lip? I find it odd that they would include that front lip and was curious what's the difference between the front lip in the kit vs. the one that comes on a standard Carrera S front bumper or a Sport Design front bumper. Thanks for your input on this. I'm getting a quote from the delaer to install and they are telling me they have to pain and install the front lip spoiler. Not even sure if it fits my non-Sport Design front bumper.

[@SveltoPerformance]

It will not fit on the standard Carrera S front bumper.

[@TameemAhmadyar]

do you NEED to get a new engine cover? or will it still fit with the original

[@SveltoPerformance]

The Aero kit spoiler comes with a new cover to replace the one in the car that has the third brake light

[@rroosenFB]

Hi Paul, nicely done! Do you also have all the partnumbers of the aerokit spoiler and the connectors and of those last 2 things on the engine cover that you need to order? Thanks in advance!

[@SveltoPerformance]

This is the link to order it. It’s all included www.suncoastparts.com/product/sku992aerowing.html

[@rroosenFB]

@@SveltoPerformance yeah but I’m from Europe so ordering from sun coast is a bit to expensive, will cost me more or less 1000 euro just for shipping. And Sun Coast never mention the original OEM part numbers on their website. 😢 So I was hoping you had those numbers on your box.

[@scottmassey4330]

Looks great.

[@floridaguy4305]

Just completed the install and this video did not address the plug on the base. The base comes with a 8 or 9 pin plug. The old base has a 14 pin plug. You have to remove the pins from the old plug and use them in the new plug. That alone took me almost 2 hours!

[@alb3096]

You may get a better air induction for cooling? Did you noticed some noise increase at hood speed? Driving improvement feeling?

[@jasonjblanchard]

Great Video. Thanks for making it. Having trouble depinning. What depinning tool did you use?

[@SveltoPerformance]

Purchased a set off Amazon.

[@tonyhumphres1558]

Awesome work and video. About what is the cost of this kit? Roll Tide.

[@SveltoPerformance]

SunCoast Parts have them for around 5K for the real OEM kit.

[@MrKaiKai]

looks good.

[@AlterZgo]

Hi Paul - Awesome job and very thankful you posted this install! When you did the third brake light wiring, did that eliminate the issue where stepping on the brakes causes the third brake light on the wing to illuminate but then causes a corresponding gap in the light bar? In other words, does the brake light on your wing and the entire light bar illuminate when you step on the brakes? Thanks!

[@SveltoPerformance]

Yes works fine.

[@AlterZgo]

@@SveltoPerformance - Thanks! Also, a question on repinning the harness... I think the intaller at Flatsixmotorsports indicated it was difficult to repin the harness because the wires were too big to fit the harness. Did you have any issues repinning the harness into the new spare harness you bought?

[@SveltoPerformance]

@@AlterZgo I bought one off eBay. It was very easy. Here’s the link. www.ebay.com/itm/285124163551?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=xYdkasPjRAO&sssrc=2349624&ssuid=ApP2AeS-QZK&var=&widget_ver=artemis&media=COPY

[@rostamr4096]

This looks so good. What is the price of the kit?

[@SveltoPerformance]

Around 5K

[@rostamr4096]

@@SveltoPerformance Thank you, I think it is well worth it. Great job by the way.

[@KB-gr5ed]

I understand that Porsche recommends having the SD front end for the spoiler but is it actually necessary or would it be fine to have the standard front end with the spoiler? thanks!

[@SveltoPerformance]

Mine has the standard and seems fine

[@slohyt]

Hi Great Video. Does the wing obstruct your view of behind?

[@SveltoPerformance]

Not at all.

[@slohyt]

How about the missing plug at 42:03? Did you manage to get the attachment/ part number?

[@SveltoPerformance]

@@slohyt yes finally Porsches them.

[@ThaProduceSection]

Hey are you willing to sell the OEM wing cover? Mine got scratched so instead of repainting I'm looking for a quick replacement. Let me know, thanks!

[@SveltoPerformance]

I’ll sell the whole thing, at a good price. My email is [e-mail] . Send me an email

[@timothylam8289]

nice work. May I ask what kind of material of the spoiler? Is it a carbon fiber? Thank you so much.

[@SveltoPerformance]

Not carbon fiber

[@timothylam8289]

Hi, I am planning to do the same aero kit on my 992. May I ask how much does Porsche charge to deactivate the original spoiler?

[@SveltoPerformance]

@@timothylam8289 my local dealer charged $200

[@kpavlos1990]

Do you have a link for where you ordered your kit?

[@SveltoPerformance]

www.suncoastparts.com

[@graysonmagleby6112]

Where did you order the spoiler?

[@SveltoPerformance]

Sun coast Porsche

[@faisalaly9281]

Did you have to get the car reprogrammed when deleting the original spoiler?

[@SveltoPerformance]

Yes, went yesterday to have it reprogrammed

[@JadEDBRAND]

i added gt3 spoiler and yes you must take 992 to Porsche to re program cost 200

[@Nexbelt]

@@JadEDBRAND I called two Porsche dealerships in my area and they said Porsche has not released a software to allow this. Who did you take it to?

[@Nexbelt]

@@SveltoPerformance who did you take it to? I was told Porsche has not released a software to allow this. I told them about what you did and they said couldn't be done.

[@SveltoPerformance]

@@Nexbelt Porsche of Birmingham

[@danielnguyen1811]

Just got my 992 and this might be something I want haha. How much is it from the dealer?

[@SveltoPerformance]

Around 5K

[@slohyt]

Hi did you manage to delete the warning for "spoiler fault reduce speed now"?

[@SveltoPerformance]

Yes, took the car to the dealer and they coded out the spoiler. Very simple.

[@senly339]

@@SveltoPerformance could you please share me which dealer it was?

[@SveltoPerformance]

Porsche of Birmingham @@senly339

[@oenoesrahardjo5492]

Can the original wing still function ?

[@SveltoPerformance]

Yes and no. You have to change some pins out on the original harness to connect to the third brake light on the spoiler.

[@gregrochevsky6740]

Do you have to paint it yourself?

[@SveltoPerformance]

Yes

[@ovrcmng]

how many times did this guy said the word "HERE" ?

[@SveltoPerformance]

I’ll have to go back and watch it “here” at my computer. What type of comment is that, seriously?