The knife SHARPENING jig II

[@RyszardRudol]

My jig arrived to Dallas, TX ten days after placing an order. The quality of the jig is superb. Craftsmanship is outstanding. Put it to a test sharpening my chef knife and the results knocked my socks off. There is no way I could have achieved the same results sharpening by hand . Great tool and thank you Mr. Kadlec.

[@krosiamakrosiama8483]

U

[@ВалерийБудагов-е7ь]

Ф

[@hvwj86]

I’m skeptic. How much was it?

[@michaelmnmnguyen]

Thank you Michal, This is the best jig I have seen. I love how it can take a standard size stone and not those tiny skinny ones. Thank you.

[@KrvPatejl]

zatím nejlepší tip na vlastní výrobu, perfektní provedení, motivoval jste mě

[@Metsger]

Got my sharpening jig roughly 2 weeks after purchasing and now use it since a few weeks and I'm happy that I bought it. Thanks Michal for this great tool and the fast delivery

[@make_it]

You are welcome my friend, thank you!

[@SlightlyDiminished]

You have created quite a nice sharpening jig. I'm impressed. Thank you for showing us how you created it.

[@rblaclewell]

I am amazed you still have all your fingers!

[@JohannesSchmitz]

Got it as a Christmas gift for my mum. Works super well, especially with larger knifes one achieves incredibly precise results. I recommend to start with a stretched bar and work with the stone towards the knife as you move along the edge. So basically push the stone in the direction of the knife. It is also shown in the video. This prevents the stone from being damaged by the plade as there's more control when the tip of the blade is reached. Also it is necessary to check and readjust the angle after the first stroke. Begin with a slightly larger angle then after the first stroke have a very close look at the blade and lower the angle. Repeat until it is perfect.

[@sheilaharrison6590]

Johannes Schmitz m

[@agcrawford]

Sheila Harrison ¡

[@tinkmarshino]

I made something similar for my use about 35 years ago.. but you have made something that made me go... oh heck! why didn't I think of that way!.. well done my friend.. well done indeed

[@make_it]

+tinkmarshino thank you very much.

[@BO-kh1iz]

Nice craftsmanship and beautiful design. I was looking for something like this because I still want to use my old stones. Do you think the stone holder would lose stability if one would build a frame for the stone which would hold the stone on the sides? So that you could just flip the stoneholder around instead of removing the stone and reattaching it for using the other side?

[@kapulu6259]

Just got mine today. Wife’s making me use it for her scissors first before I can use it on my stuff. Looks beautiful, very smooth action love it.

[@kapulu6259]

Totally worth the wait. I think Christmas and the fact that I’m on the other side of the earth was the factors in the wait.

[@make_it]

Hi thank you for your information, there was also many customers before the Christmas, so many shipments was little delayed.

[@marekwozniak7290]

Najlepszy ze wszystkich pomysłów.

[@muscletone08]

Got the jig delivered to Australia with no problems. Fantastic product and waaaay better than some of the more expensive sharpening jigs i have bought. I especially like the fact that you can use full size sharpening stones (just make sure you use similar thickness stones tho). Gives you fantastic razor sharp knives.

[@vladonweb1]

Muscle Tone Just asking, how much did you pay for jug with shipping to Australia? Thanks.

[@0zhiph0p]

Yer same. Price plus shipping to aus

[@CarlosMoreno-mr5me]

¡¡BRAVO!! FÁCIL Y SIMPLE, MUY BIEN AMIGO.

[@suff65]

jig delivered today and straight tryed ...never had such a sharpest knife as now.5 Stars .well done dear Michal.

[@agcrawford]

Mario Menardi bbb

[@make_it]

The price is EUR135 for the jig, it is delivered with the 1000/3000 stone. The rocommend combination: Knife sharpener - 135 2000/5000 stone - 50 Leather block with paste - 23 -------------------------------------------- Total EUR EUR 208 plus shipping cost (Europe EUR - 20, USA, CAN, ASIA, AUSTARALIA, Malaysia ... EUR 65)

[@The_Joker_]

Michal Kadlec Where can I buy one?

[@tonyserafim9237]

I’d like one. How do I buy one from you? I’m in Toronto.

[@MsBode123]

I would like to buy one of your sharpeners with stones how can I email you

[@MsBode123]

Michal Kadlec I would like to purchase one of your sharpeners with the stones how can I contact you directly

[@make_it]

MsBode123 you can writee e-mail [e-mail]

[@johnjude2685]

Stone holder if it fails, Stone might be broken.. " But Big Thumbs Up" love your project. Great build Sir

[@opasworkshop8373]

Beautiful job Michael you make such wonderful products.

[@make_it]

+Opa's Workshop thank you my friend, its nice to hear from you.

[@gunlokman]

Great - I especially loved the cup of coffee bit!

[@jameshoffman1842]

The thing I really like about this jig is that it uses stones instead of sandpaper …👌

[@CarlosMoreno-mr5me]

¡¡BRAVO!! FÁCIL Y SIMPLE.

[@billk5631]

What kind of oil do you use for the leather strop? Great job. Thanks

[@JesusmoranBarber]

Se pueden afilar tijeras de peluqueria de esta manera?

[@johnjude2685]

Do you sale the build plans? Nice job ,earlier I got bugged from pointless noise but like your finish Thanks and thumbs up

[@m43567]

Have used your jig for several years. It's really good. I fall down on the sharpening technique - like Which stone will give me a burr? How much to use every stone? How many stones in a sharpening set? What's the angle for sharpening scissors?

[@MarkWoodChannel]

It's a large version of the Lansky sharpener, very nice work.

[@nicolasm3217]

Bonjour. J'adore ton système d'affutage, simple, le seul coût ce sont les pierres japonaise sont son extra, mais j'ai pas bien compris la texture rougeâtre que tu as mis sur la pierre ? Merci Bye

[@cyranozimmermann3118]

nicolas M il n'a pas sur ses pierres, mais sur son cuire. Il a accroché un bout de cuire a une pièce de bois et la pâte rouge qu'il met est de la pâte à polire, c'est pour bien finir et avoir un tranchant rasoir

[@erenates6183]

Very nice product my friend, thank you. How can I buy this product?

[@ToddAndelin]

It doesn't get any better than this.

[@bibliothequenibras9007]

what is the angle of sharpening

[@abdoelka1671]

Nice job, how much this sharpner??

[@fredberry1342]

Do you sell these sharpeners or maybe the plans?

[@kerstinserna9851]

Very Nice. I world live to but One of your super tool. How much It cost ? thanks

[@karlorodriguez4144]

Hola amigo buen trabajo.q medidas tiene el afilador q fabricaste.saludos man.

[@wertfreund2480]

Ist's a *great* piece of workmanship Michal !👌 If You're willing to listen to my advice: If You slit the holes of the "jizzle-like"clamp- that fixates the blade/knife to the wodden block ist's easier to fixate broader blades. It would also be nice if You grind a square 40x20x10mm deep into the wodden block to hold the blade with an N52 neodym magnet the same size. The advance of the more narrow whetstones, which originally came with Apex are just about 20mm wide, so You're able to sharpen koncave internal rounded blades like karambits or hand-scissels. Also is a smaller wooden stone-holder-block lighter and easier to move with less weight esp. on curved knive tips =>less pressure to the edge and tip of the blade. The quality of Your product is *way better* than the Chinese or even Lansky ones 👌👍🙋 I'd *love* if You're improving Your product to *all sizes* => width => of whetstones 20 - 100mm=> needs to slim the wooden stone-holder-block to 25mm and a carved in 60° phase into the middle of the steel stone-brackets .😉

[@BBBYpsi]

excellent job making this jig.

[@basdekemp]

Hi michal, very nice product. Can you advise the height from the from the jig when all is mounted? Thanks

[@sergei8515]

Хороший станочек. Талантливый человек, талантлив во всем. Лайк! 👍

[@dantemarasca]

Hola, saludos desde Argentina, muy bueno el dispositivo que hiciste, deseo hacer uno igual, pero yo usaría lijas de distintos granos, que es mas económico que las piedras, podrás pasarme un croquis con distintas medidas del dispositivo ?? muchas gracias

[@adelinoalves4932]

O aparelho está muito bem feito e o Sr deve ter mesmo muita confiança pois arriscou colocar o dedo bem à frente do formão (?). Com a quantidade de ferramentas que possui, mal parecia que fizesse má figura.

[@31acruz]

the guy sells the jig yet never tells you how much it is or where to get it. incredible.

[@jachconi]

Do you still sell these? Wondering what the cost is? Shipped to New York

[@juanayala8587]

Buenas noches amigo podrías ayudarme con el nombre de la aplicación que usó para el móvil y medir ángulos Y gracias de antemano

[@JuanAguilar-nv6lu]

Dear Michael Thank you very much for yours videos. Please if its possible, show us your workstation and yours machines in a next video. I´m amanzing for the quality of yours devices.

[@danielredondo1090]

Hola me gusto mucho tu video saludos cordiales. Daniel

[@terryn3921]

what's the best angle to sharpening the knife?

[@ДмитрийВасильевич-ч6х]

Супер Точилка!!! Браво!

[@qamarulmajidi8035]

can it sharpen curve surface nife

[@cheryljason9617]

Well hella bells I'd rather pay you than some wicked edge big company... look like I'll be getting a early Christmas present lol thank you sir

[@michaelbyron9688]

Are you still selling the jig? If so, what is the cost? Price to US?

[@MrCryptler69]

1:05 It is so dangerous to push the wood all the way through the table saw with his hands. If the wood kicks, he's losing some digits!

[@shaggyda2758]

Thank-You for sharing,very nice detailed video! you did`nt spend 20mins telling us, how you got started!

[@72zygmunt]

Witam. Jaka jet cena ostrzalki

[@АльбертДобрыйтатарин]

Отличная работа,аккуратно всё!,молодец.👍

[@TrojanHorse1959]

Very nice! How much does it cost?

[@williamspence5029]

Price please for complete set including leather strop, shipping to Scotland very busy chef who takes care of his very expensive knives thank you. Can wait till Jan if it helps.

[@make_it]

The J&O knife sharpener EUR 140 1000/3000 sharpening stone included, than my recommendation 2000/5000 sharpening stone EUR 50, polishing set EUR 23, shipping EU EUR 20. All together EUR 233. I still can send within 2 days, anyway 3-5 orders/shipments flying out the door every day so it is hard to say haw long my 2018 stock stay available.

[@williamspence5029]

Ive just watched a new blog for your metal mark 2 version , sorry to be a pain how much for that one plus the same sharpening stones. Thank you for your time.

[@LS3438]

Are you still making these?? I would like to order one

[@dantemarasca]

excelente trabajo,te felicito

[@garlandremingtoniii1338]

Michael I want to buy one! Tell me how much in American dollars $ and how and when can I??

[@Max-uz8ys]

Verry nice jig. But what is the price in Euro or Dollars

[@tomaswiak3625]

Hi Michal, congratulations to a fantastic Product. May I as what is the smallest angle you can adjust on your jig ? Also, which dimensions (length) of the stone fits to your jig ? Best regards from Sweden.

[@yetoburnukoglu9084]

How can we order your Jig? Do you ship to Canada? Can you provide a quote?

[@martinblazek7199]

Co tak ještě vylepšit držák kamenů pružinou? A nebo i držák nože? Dát pružinu tesně před část co drží nůž, aby bylo snadnější upevnění nože? Pokud bys toto vylepšení použil, klidně bych se přihlásil o využití prototypu č.3.😉👍🏻

[@youbetterwatchout2745]

Hi what is the Price for this lovley Produkt

[@corey688]

What range of angles will your jig adjust to ?

[@make_it]

12 - 30 degrees

[@marekmagyar5119]

aku maximalnu dlzku noza je mozne nabrusit bez toho aby sa noz musel presuvat ? a co ohybne noze na ryby? mozte vyrobit siroku zakladnu aby sa noz neohybal pod tlakom brusenia?

[@make_it]

Díky dlouhému ramenu se dají brousit nože délky okolo 300 mm bez přestavování, Vodící tyč s držákem kamene je dlouhá 70 cm! Co se týká filetovacích nožů, tak bych Vám mohl spíše udělat pod nůž podložku, jenž by se upínala společně s nožem a zamezila by tak jeho prohýbání. Kdyžtak mi písněte na [e-mail] a domluvíme se.

[@valentinzuchuat9649]

Just got it today! Amazing job Michal!

[@make_it]

+Valentin Zuchuat thank you Valentin, nice to know that the jig came to you. Wish you all your knives become super sharp.

[@lapualapua1248]

Excellent system well done 10/10👍🏻

[@bratsk_rulit]

Tell me the length of the board on which the knife is attached?

[@annap3520]

witam ,jest możliwość zanówienia u Pana takiej ostrzałki jaki koszt i czas na zamówienie z góry dziękuję i pozdrawiam

[@gerardoherrera4727]

Parece que hicieron él vídeo más, para mostrar las herramientas que para mostrar la fabricación del afilador

[@jonathanwesselman1575]

How do I get the pieces ans parts?

[@BeetleJuice1980]

Why are the scissor angle so different?

[@lepoloo]

What is the price of such a jig? BTW good job!

[@mogulsmoke2428]

Are you still selling the jig? If so, what is the cost?

[@جوجوحسين-خ6ض]

Your work is very beautiful, professional and professional, but can I ask you for a request? I want the name of the application that I use on your mobile phone in the size of the semicircle to determine the required degree. Thank you

[@andyle0609]

what oil did you put on the leather block and what's that white paste?

[@make_it]

Hydraulic oil

[@stevemcgee99]

I'm totally impressed!

[@geirarnetangen4571]

Very nice sharpening system. I would love to buy it, but if i can't be used at 10 to 15 degrees it is of no use for many of us with japanese knives. Please tell your customers the work range of your system. So sorry it seems not to fit my needs.

[@make_it]

Standard 14 - 30 degrees, with extra part 10 - 30 degrees

[@geirarnetangen4571]

Thank you for your prompt answer. So how much for the extra part(s) in addition to the jig only.

[@make_it]

extra short pipe just available to be delivered with the jig or as a extra part.

[@The_Joker_]

EXCELLENT JOB!!!!

[@terryn3921]

we can use any oil for the last part right?

[@make_it]

Machine oil, not vegetable oil.

[@make_it]

+Terry Ngai it could be

[@bodybuildingmotivation6734]

I love this vid awesome no one better than

[@marianbodnar5468]

Dobrý den, systém Jig II je i k prodeji? Pokud ano, kolik tento systém vyjde a kde lze objednat. Děkuji za odpověď

[@obiorah1]

That’s impressive, well done, excellent,

[@DanielDuesentrieb86]

I recommed a linear bearing on the shaft to reduce friction

[@saulcesaramaro7465]

How much is the jig

[@todosupervivenciaymas7429]

Could you pass the measurements of this sharpener?

[@dokomato8161]

How I can sharpen small knives? I guess it's not easy.

[@make_it]

Have a look: m.facebook.com/story.php?story_fbid=388109495234532&id=142065553172262&sfnsn=mo

[@steann1]

So i only need $2,000 worth of equipment to sharpen my $20 knife... doh ! I am kidding... enjoyed every minute of it.

[@make_it]

More than $2000 - :-D

[@steann1]

Michal Kadlec .. i am jealous.. but love it.

[@donsegundo5012]

Hi mate, what is the smallest angle that can sharpen?

[@10000rambos]

So...wouldn’t the proper sharpness test for the scissors be slicing vegetables?

[@rogeragnefjall6718]

Amazing tool, nice looking to. Well done.....

[@BellaGamtosStebuklas]

Hi Michal, I'm living in France and would like to order your knife sharpener with two waterstones and leather block with paste.Please, can you tell me what is the brand (and model) of waterstones and leather paste sold with the jig ? Thanks !

[@cgi2173]

You could spring load that stone holder, so you don't have to unscrew and screw in the handle each time. ? 😀

[@franciscojrodriguez6557]

Hi Michal! great videos and great handywork! Will the jig work to sharpen a 10 to 12 inches long knives? And if you ship to Puerto Rico?

[@make_it]

+Francisco J Rodriguez yes you can sharpen that size knives. I can send it to you, just send me email [e-mail]

[@kuczer888]

Really good job

[@farmerbrown2010]

It's been a year since the last post. Are these jigs still available? Where can I get contact information?

[@make_it]

Still available, just write me to [e-mail] to

[@lonewolfdesignsbylarry]

Can this jig be used for setting the first bevels on a new knife using files?

[@mavamQ]

I'm not a knife maker but have watched a lot of videos and have seen others use a 50 grit sand paper on a piece of wood in the jig to make the first bevel. Then go to 80 grit paper and then on to stones. Just cut a piece of wood the size of the stones and glue the sand paper to it.

[@хариссимукляров]

Super!!!!!!!!!!!!!!!!!!!!!!

[@bratsk_rulit]

Tell me the length of the pipe on which the hinge is mounted?

[@make_it]

The dimensions at my patreon account available.

[@farizmuhametdinov7455]

Молодец! Браво!