The LIGHTEST Skateboard Trucks Ever! (Are They Worth It?)

Today I'm testing the Tensor Mag Lights, the apparently lightest skateboard trucks ever.
Chapters:
Intro: 0:00-2:20
First look at the Tensor Mag Lights: 2:21-3:17
Weighing and comparing trucks: 3:18-4:38
Session on my Royal trucks: 4:39-5:40
First session on Tensor Mag Lights: 5:41-8:36
First grinds on Tensor Mag Lights: 8:37-9:08
Final verdict of Tensor Mag Lights: 9:09
Nightspeeds Merchandise: bit.ly/2XcfU0D
Discord Server: / discord
Instagram: goo.gl/TQ59r1 | Nightspeeds
Twitch: goo.gl/VisFng | Nightspeeds
#LightestTrucks #Tensor #skateboarding
This video is "The LIGHTEST Skateboard Trucks Ever! (Are They Worth It?)".

[@rainzcashsodmg8372]

i have the mag lights and i love them!!! i love the lightness. i skae indys for 30 years and i cant believe i switched but the mag lights got me killing it!!! and they grind super good

[@Lakai4hire]

i have those same ones there nice and as for the bushings i would recommend some bones bushings

[@sktr4lf]

had three sets, bent the axles on all three skating flatground, they lasted a couple months each... and I only weigh 140lbs. They're great trucks, but the axles need sorting out. The grind on them is amazing.

[@SkateCrisis]

They grind super good. The only issue is that the hollow axle will bend when you slappy them for a while. Also the magnesium material seems to be a bit more fragile than classic aluminium so they will deteriorate faster.

[@donalddavis2956]

I have skated tensors for a few years and one thing about them is the bushings.I have tried just about every bushing combo you can think of and what I did was I put a thunder bushings in and also riptide street bushings works as well.just throw those tensor bushings away there garbage unless you like super tight trucks

[@mistake920]

They are very similar to Indy Stage 11 but super light. However, I have to say I recently switched to Indy Forged Titaniums and I dont know if its the added little bit of weight or what, but my pop is higher and more controlled, also indy turn slightly deeper. Also I have to say when I look through the axle even when they were brand new, the axle looked slightly bent. If you are a beginer and want light trucks i would recommend Indy Forged Titaniums or even Forged Hollows for a better price.

[@BraianSilveira]

I use it and I luv it!

[@arikuusela6716]

I have mag lights and I don't like the bushings, so I change them to doh doh bushings. I noticed Mag lights are too light for me, but I use a hybrid setup with Tensor mag light hanger and a Ace baseplate 😄If the setup is too light it feels a bit floaty.

[@brentsanada6589]

Why not just buy ace af1 hollows then?

[@Abby-zl7xr]

The titanium trucks back in 2002 were theeee lightest trucks man! They need to bring those back!

[@brentsanada6589]

Indy makes titanium up to 169mm

[@diplenski]

Flatter board would probably help your ankle too, I’ve heard mini logo decks are nice for people who like flat boards. I like the feeling of flatter boards but I like the stiffness/rigidity of steep kicks/concave

[@TrinecMistr]

Bro have you ever tried mini logo trucks that Andy Anderson is shredding on? They are super low and quite light, I have fun ridin' with it.

[@NightspeedsSkateboarding]

Always thought about trying them!

[@diplenski]

I really like mini logo bushings

[@mikethomson6546]

They grind anything, wax or no wax. Feather light. They can make your board feel to light. I found it threw board feel off and flip trick timing.

[@NightspeedsSkateboarding]

Yeah that first kickflip definitely surprised me. Whole different feel

[@diplenski]

Trucks can certainly be too light. I usually go for Indy or venture standard, I feel like the weight gives it enough momentum to stay on course to catch your feet. The Indy forged hollows are nice but nearing too light, they do make it easier to do tricks higher and skate longer. Thunder forged hollows seem too light for my liking.

[@CallumOneil999]

I'm trying to get into Skateboarding I always loved the skate games and I would see places IRL and think that I would be sick to skate. I had a Plan B complete deck for maybe like 2 years then last year I tried using it for the first time but felt I was pushing a lot and I fell. I thought it was just cause I'm new and ass but turns out only one wheel span like normal the rest would barely span (It had just been inside the house so it's not like it was out in cold weathers). Either way I'm trying to get back into it I live in a small town in the UK. I'm like 5'll/6 feet weigh like 140lbs wear like size 9.5 (vans) and was just curious what would be the best board size? I did just Order a Supreme Purple KAES bogo deck which I think is a 8.375 (Will this be too big? my aim is to get the basics down like cruising, ollie's and all that but I would love to be able to street skate. Maybe even skate at the Skatepark near mine even tho it's just a halfpipe, fun box, then the other side is just different quaterpipes and a roll-in. It's such a poor skatepark there is worse in my town but this is the Blyth sports centre you would think they would have decent park. I do want to try and make it in SkaterXL even tho I think the funbox would be the only working obstacle lmao). We are getting a 200k+ Skatepark but the section they are budling it is right next to the Skatepark I'm on about and this other real bad one which I basically a quarter pipe, kicker and rail (There's a bridge near that park which apparently people have hung themselves there). Basically these parks even if I was good enough I would only go to at like 6/7am lmaoo I know I got off topic but any help on knowing what size board I should use would be greatly appreciated. Same with Truck I was thinking of just building a full Supreme board (If the current deck I bought is too big I don't mind it as an art piece tbh sins I love the KAWS Bogo and purple)

[@NightspeedsSkateboarding]

I don't think 8.375 will be too big! It's all about big sizes these days. I have a friend around your measures that ride the same. Hope everything you'll go for will come with a lot of fun :)

[@CallumOneil999]

@@NightspeedsSkateboarding Thanks for the response and info :)

[@SlimShadytill80]

Hvor køber du skateboards henne?

[@cache365]

For me the mag lights low were terrible yhe baseplate broke in 1 day with a pop shuv on flat, had them a couple times because I like theyre so light but they always break

[@NightspeedsSkateboarding]

I'm hoping these will last for a little while :) but that does sound awful!

[@peenurmobile]

it's noticeable even when you're just holding the board, it seems lightweight in your hands

[@Taylor.m87]

Do tensors come in lo’s mids or hi? I’m trying to find a pair but I can’t find any labeling or height measurements. I’m wanting a mid but can’t tell which I am ordering.

[@K_spawn]

Yea

[@K_spawn]

I got some Mullen mag Low and they are very low ,46mm

[@K_spawn]

And I noticed the tensor ATG is very similar to Indy's in height and geometry (similar not the same)

[@Alexirongatewelding]

Still have a bran new set of black kreapers.🤙

[@liggerz87]

You'll done they will grind almost anything I have a pair on a slick deck also that drop you did that showed you broke the other tensors don't try that on the maglights you will break them

[@ryanrowe1975]

Wide trucks and making the board lighter to control the board of skating with the trucks

[@_Maxten]

The lightest trucks on the market are 2hex magnesium+titaniums. They’re like thunders but even lighter with the maglight material

[@MonkeyMagick]

Does anywhere actually sell them?

[@EigilVestergaard]

I have them

[@user-dc7vj7gw4b]

Thats problem with all these truck companies there stock bushings are shit 😂 i suggest buying hardcore bones bushings.

[@brentsanada6589]

There's no real point to these tensor maglite... They are already for skinny boards, light 8.5 and below. Ace is the only one making super lightweight trucks that can accommodate a 10in deck

[@davidleeashkenazi8992]

I ride the standard AF1's and they're more heavy than standard INDY'S

[@brentsanada6589]

@@davidleeashkenazi8992 there's some details missing here. What size trucks are the indies? How many grams do they weigh in at? What model are the ace trucks? What do they weigh in grams? Your statement has no data behind it, therefore it's not believable that the heaviest machine truck in the market is somehow lighter than the lightest weight cast truck.

[@davidleeashkenazi8992]

@@brentsanada6589 my data is from many, many KZbin videos - please try to use the "Search" option once in a while :)

[@KeithCanisius]

Ace are heavier than Indy 10inch. Thunder 181 10inch are lighter, but out of stock everywhere.

[@brentsanada6589]

@@KeithCanisius Please provide scale weight evidence for your gratuitous assertion

[@GLadislav23]

I have Carbon fibre baseplate and hanger, dont thing u got the lightest in world, but arguably the lightest available on market to buy, if u want to stay in touch can give u sneak peak of my buddies

[@NightspeedsSkateboarding]

That sounds sick!

[@sungameloc]

RIP tensor

[@qaz3761]

Are they really out of business?

[@NightspeedsSkateboarding]

I think so. Dwindle has been fully shut down as far as I've understood and they were part of Dwindle :O

[@mike16241]

Tensor's no longer the king. 2Hex ti hollows are 40g lighter. Theeve tihangers may be the lightest

[@hempstead.studio]

hell yeah