The Mafell MT55 18v and Mafell KSS60 18v the best saws in the world? Lets find out!

[@richardteychenne3950]

Thanks for the update on which tools produced least dust. I was watching and watching thinking, nasty itchy job, then thought the air seemed to be staying clear and little ppe. Useful findings although the next time I need Celotex I want someone else to do it 😀🤔😜😜

[@blowfeld38]

I'm the cellotex kid, just call and I'll be there dude 👍

[@cuebj]

Most impressive thing: lack if dust from the Mafell circular saw, not even the fully enclosed track saw. If my children embark on big home renovation jobs, I might justify Mafell but, for now, I have a new corded Makita with an accessory to fit on Makita track for just this sort of job - don't need mitre saw anymore. Shame my old 290mm Makita won't take the attachment

[@philclennell]

Interesting that Mafell seem quite content with 18v whilst others are offering 36,40 and 54 volt.

[@TomsTimmervan]

got both as well, mainly dewalt and hikoki for the rest but these expensive tools are money safers, hardhly every have to carry arround my large chopsaw or table saw. Perfect for roofing. Wished the KS80 was cordless though. I too have many chargers and batteries but I feel I have the best for my line with that.

[@blowfeld38]

They are the pinnacle and you're right about batteries and different platforms. I like both dewalt and hikoki brands, got a few dewalt bits myself, no hikoki, yet....

[@samengels1649]

Mafell is currently developing a 105mm cordless saw. It maybe released in march 2024

[@TomsTimmervan]

@@samengels1649 got a source? 2 batteries or one?

[@ElJasperino]

Great to see you again. Will you also make new videos in your other channel?

[@blowfeld38]

Absolutely Jasper, this week amigo 🙌

[@ElJasperino]

Awesome!

[@JamieVauxnut1]

Even though this video is 2 years old and the tools even older this is still one of the demos out there . The onky one that confirms the kss60 can be used on normal mafell rails . Anyone know if it fits the flexi rails or is it just for the 40 ?

[@nevinbeaver1111]

Enjoyed as always when are you heading back to Portugal?

[@blowfeld38]

we may well be here now! ;)

[@MrLasipa]

Hi, I'm did cut kingspan foam 150 mm thick with mafell jigsaw on guide rail and 280 mm long blade, that was soliusion, workt well.

[@blowfeld38]

I have been using a jigsaw but not with a rail. That's a great idea 💡

[@simonh73]

Where did that Mafell battery jigsaw (around 6 minute mark) come from ?

[@MadLadsAnonymous]

It's an older Hilti.

[@MadLadsAnonymous]

Funny enough, Mafell JUST announced the P2-18 (or P2S-18), the 18V CAS version of their P1CC. They may have updated the motor, but I'm not sure. Takes the same thicker jigsaw blades as the P1CC!

[@rickyperkins232]

I am in the US where track saws are not popular compared to table saw, nevertheless I like the idea of a track saw especially for sheet stock. Be honest what is the best track saw you have seen and why. I am almost cordless overall and will go for a battery track saw.

[@blowfeld38]

I have owned 2, the festool TS 75 and the Mafell MT55 18v and the Mafell, even being battery powered is easily as wonderful as the TS but the rails are 100x better, the dust extraction is better, the blade change is easier and the score function is a game changer, Mafell, all day every day 👌

[@rickyperkins232]

@@blowfeld38 I was on the bench and I am going to purchase the Mafell

[@rickyperkins232]

@@blowfeld38 do you know if the Matabo 8 amp hour fits this saw and doesn't get in the way when cutting at 45°? Doe this saw have electric break so when you let go off the trigger the blade stop spinning?

[@rickyperkins232]

@@blowfeld38 Listen I just picked up the new Mafell MT55 with 1 battery 8 amp hour and charger Matabo. I played with it even though I don't have a track yet. Thanks for your insights I appreciate the video and your help.

[@jamespinto5379]

Are you in England or Portugal 🇵🇹. I haven't seen your videos for a while

[@blowfeld38]

England for now...

[@dongeary2219]

When back to Portugal ??

[@blowfeld38]

Tomorrow 🤩

[@maarton]

Damn, how many pipes can one run through a beam before it loses structural integrity? Also, you gotta love all the different brand battery chargers hahaha.

[@blowfeld38]

It is a secondary beam and all the pipes were drilled in parallel therefore reducing the 'damage'. As for the batteries, if you want the best kit you need to go across many platforms as not one stable has all the stallions 😉 Thanks for commenting amigo 👍

[@maarton]

@@blowfeld38 didn’t think it was unsafe or anything. I’m sure you know what you’re doing. I think the manufacturers need some regulations on their ass like with the phone manufacturers having to go all USB-C.

[@blowfeld38]

@@maarton check the CAS battery platform. Mafell, Metabo and many others, Collomix, Rothenberger I think, they all share the same battery platform, it is wonderful and Mafell are the gods of power tools 👌

[@ourfarmportugal]

Champion

[@blowfeld38]

The wonder horse?

[@andreasschneider92]

18:02 is funny :D

[@bearders22]

Moonlighting on another channel Nick?

[@blowfeld38]

Yes! I do love tools so it made sense to do this channel too 😄

[@bearders22]

@@blowfeld38 It found me, I suspect this was due to the You Tube Algorithms?

[@blowfeld38]

@@bearders22 I hope so 🙏 I need subscription here, it's really hard work and I've put in so much love here

[@bearders22]

@@blowfeld38 well, here one more 😎

[@blowfeld38]

@@bearders22 muito obrigado amigo

[@B15SDMDESIGNS]

Imagine having to carry around all them different chargers and batteries

[@blowfeld38]

I want the best kit in every field so for me it's necessary. Everything has its place and I've not really noticed to be honest. Thanks for commenting and supporting our channel 👌

[@B15SDMDESIGNS]

@@blowfeld38 I get what you mean, that's the price you have to pay when you want the best of the best. If I had all those chargers I'd build a special crate that houses them all at the same time. Almost like a charging crate if that makes sense.

[@blowfeld38]

@@B15SDMDESIGNS great idea 💡 👍

[@shcutter]

Nice one amigo, WTF was the cat all about? 🥴 When are you back in paradise?

[@blowfeld38]

31st. With your hat ❤💚💛

[@blowfeld38]

The cat climbed the birds nest to eat the birds then realised he had bitten off more than he could chew. It tickled me to see the consequence of greed 🤣

[@shcutter]

@@blowfeld38 Nice one, are you retiring or doing work over here?

[@blowfeld38]

@@shcutter I'll tell you when I see you brother x x

[@shcutter]

@@blowfeld38 Good man yer self 🥰

[@ruthconstantino6861]

😾 "I meant to do that."

[@blowfeld38]

😉

[@magixsparx]

Bom dia!

[@blowfeld38]

Boa noite amigo ❤💚💛

[@tonymoloney3223]

Not really! there no better than any other make on the market! If you think they are then it's because you have more money than sense! Check out Peter millards review !

[@tuuune101]

Tony Moloney you’re talking baloney!