Weak 4th gear, seems like a known issue on the forums. They tend to break when people turn up the boost and produce higher torque. The fact that the L15 makes a ton of low end torque exacerbates this problem. HPD makes beefed up gears that solve the issue though.
@SniPR252 жыл бұрын
Beefing the 10th gen when upgrading a turbo for reliability when trying to reach the 300+/- hp mark
@yovanymarin36612 жыл бұрын
Type-R?
@ricanjones2 жыл бұрын
Head lift
@MayhemCanuck Жыл бұрын
The fact you started with " when you start to modify " is the best part. As a Honda Tech I have a 18 Si and drive it hard, all the points you brought up are spot on. These cars are so fun to drive stock but when you do add power you have to support it with upgraded parts, you could also add switching to Head studs instead of the stock hardware for a better clamping force when pushing more boost. Some people think these things are like the old days where you can just start cranking it up, nope, you got to be careful. .
@turdferguson74382 жыл бұрын
Weak clutch: sadly, the only solution is to get a better one Oil dilution: happens to every DI gasoline car. Drive the car further and let it warm up, short drives where the engine doesn't fully get up to temp will exacerbate this tendency. Carbon buildup: again, let the engine get up to operating temps and floor it regularly. According to VW, Subaru, BMW among other forums, carbon buildup isn't as big of an issue if the car's driven hard even semi regularly. The Honda 6 speeds also have an issue with weak gears (moreso 4th gear), and HPD makes a beefed up gearset for higher power applications.
@jewberg77292 жыл бұрын
Would adjusting the spark plug gap size to ignite at sooner intervals help with the oil dilluution ?
@jesspeachie2 жыл бұрын
Floor it regularly to help with carbon build up? Say no more!🤣
@turdferguson74382 жыл бұрын
@@jewberg7729 no, the combustion cycle has nothing to do with oil dilution. It's everything to do with fuel condensing on the cylinder walls when it isn't at operating temperature, hence why cars with the L15 turbos that get driven very short distances have this issue.
@turdferguson74382 жыл бұрын
@@jesspeachie yes, you want the valves to get hot enough to burn away that carbon. Mazda actually did a study on this and designed the coolant passages in their Skyactiv cylinder heads to not be as close to the intake valves so that they get hot enough to help negate carbon buildup.
@jamesmedina2062 Жыл бұрын
@@turdferguson7438 the intake valves ARE the valves that get carboned up
@benitoloco899 Жыл бұрын
I think the oil pump gear is the most overlooked upgrade in the 10th gen Civic. MAPerformance is spot on about the stock one breaking.
@jasonlecreux1175 Жыл бұрын
Th only thing I would like to add on are fuel injectors and head studs stretching (head gaskets) are prone to be problems on the L15s
@whispr6331 Жыл бұрын
Update as of now. I have a 2017 civic si coupe with 69k (nice) miles on it. Ive kept constant check on my oil status by giving the dip stick a whiff everytime I check it just to make sure the gas smell isnt too strong. I get my oil changed every 3k miles or so to feel better about it. Oil changes are pretty cheap anyway so it would benefit to treat the engine to fresh oil as often as possible. Since it seems the fuel blowby issue is most common when the engine is cold, as of july last year I have started using at least 5w-20 in the engine to try to protect those cold starts since fuel can thin the oil out overtime. The car itself has been driven pretty dang hard throughout its life. It was tuned running Hondatas 9+ ots tune since as early as 8k miles. The clutch died at 15k. And has been thru 3 sets of tires already. The car has long since been put on a more powerful tune and improved with several bolt ons. Before I hit 60k i felt like the cars fuel economy was suffering so I changed the spark plugs at 60k miles and was shocked to notice my fuel economy return. Up to 43 mpg on my longest trips. The car has no odd smells or noises or any sign of leaks or odd behavior. I have also hit several deer in this car and suffered only from body damages. Car still drives like it was born yesterday. Heres to the next 70k miles 🍸 Meant to add that yes the car has been tuned the whole time running up to 25lbs of boost with full throttle shifting enabled for the last 30k miles with no hiccups, no cooling issues and no knocks.
@TrickyRedkey7 ай бұрын
They are the most reliable turbo car on the market rn
@papacrypto65566 ай бұрын
lol several deer 🦌
@0xC47P1C36 ай бұрын
Stock turbo with 25 lbs boost tune?
@WhatChuSay2 жыл бұрын
MAP performance thank you for this video. I’ve been taking my 10th gen in for about 2months now. I’ve been having a loss in power through 1-2 a lil off the start in 3 as well. I’m like wth can it be, I’m noob, so imma check my spark and if there’s excess carbon it’s prob time for carbon build up maintenance, I hope that’s my problem! Thanks MAP we love 10th gen videos
@yksanta89972 жыл бұрын
Tuned and Just hit 30k miles on my SI and I love it
@malakius2 жыл бұрын
Nearly 18 thousand miles with my 18 Civic SI, no issues, aside from some weak AC. Looks like I'll need some recharge of the AC unit. Easy enough. No carbon build-up, always take long drives enough to warm up the engine, wait a little bit to cool off the turbo after driving, always doing the required maintenance. Car is good.
@maperformance2 жыл бұрын
Keep taking care of it and it will take care of you!
@MrHappy672 жыл бұрын
This Civic generation is known to have failing AC condensers. Luckily, there's a Honda service bulletin for it so definitely bring it up when you take it to the dealer. Shouldn't have to pay a cent. I've had to replace the condenser on my 17 si 3 times already.
@TingtaTongg2 жыл бұрын
My 18 SI had weak AC as well. No leak detected, after bringing it in the 4th time for a recharge they found leaking at the compressor. Wanted to charge me for the repair ~2k but ended up getting it covered. The service bulletin doesn't cover the compressor unfortunately
@dominicjeanb2063 Жыл бұрын
Nice but 18k miles is nothing, still brand new essentially
@salmonhead57 Жыл бұрын
If you have not received the letter, the A/C system is now warranted for 10 years.
@vermontvermont9292 Жыл бұрын
I've been using crc intake valve cleaner since new. I use it right before an oil change. I also change the oil every 3500 miles. Not sure how much it matters on the L15B7 but a catch can might help? Also make sure folks are keeping an eye on their pcv valve too.
@jeelu87 Жыл бұрын
I have a 2019 si in red and I love my car . I can’t wait to finish paying it off in a few years so I can start upgrading it
@doubletee43912 жыл бұрын
helpful video thank you. You were a little vague though. Like what service interval should plugs be replaced at? When you say over spinning the factory turbo you don't mention what boost pressure you are talking. the its tunes range from 20 to 29 psi from what i've seen. How much is too much? What exactly was teh fix the honda does to address oil dilution?
@hdxvortex56712 жыл бұрын
+8 is typically the pushing point, anything over +6 long term is going to hurt it
@genenie59812 жыл бұрын
There are plenty out there with over 200k miles. I don't think oil dilution or carbon buildup are a problem with this engine.
@litovvhghh Жыл бұрын
It happened to my 18 sport at 85k
@jamesmedina2062 Жыл бұрын
@@litovvhghh which one??
@adammccollom1371Ай бұрын
I got over 300,000km I don't know what ppl do .. its a 1.5L like it's peppy but it's no rocket 😂 yall buy this commuters vehicle and drive the piss out em and cry when it breaks 😢😅
@robertwynn9169 ай бұрын
Does this break down apply for the 11’gen si as well?
@gettingfitat50152 жыл бұрын
MAN I wish I could find someone local to Littleton, Colorado that actually KNOWS these cars like you guys!! SOOO friggin hard to find good help these days! 😉😉
@jamesmedina2062 Жыл бұрын
Edge Autosports is right in your area. Don't know them?? They on Iliff I think.
@rmartinjr83 Жыл бұрын
Thanks for info i just bought a 2021 honda civic sport hatchback i was looking mod it
@RodofAllTrades Жыл бұрын
If it's cheap and fast, chances are - it's not reliable. I have learned THE HARD WAY. Head gasket, ARP studs, front mount intercooler, clutch, and now injectors due to random misfires on 1 and 3. If I have one more MAJOR problem, my Si will be going BYE BYE. "Not a good way to spend $10,000". I should have gotten a Type R and went with a higher monthly payment....
@shuko40452 ай бұрын
How’s the si?
@flash_61062 жыл бұрын
Your saying the passenger side of my motor is knocking because honda flawless design getting gas in my oil.. would a catch can help that last longer ?
@jbong652 Жыл бұрын
60k miles on my 2020 fc1, I had the phearable 1.5/1.5r tune and intake since 2k miles on the stock clutch with no slippage to this day. We'll see if it still holds with a downpipe/intercooler. Honda should've just put the type-r clutch in this car from the factory.
@MiloStinks Жыл бұрын
Did you start slipping? I’m at the same mileage and stock clutch. Just ordered a Ktuner.
@Eugen-E2 жыл бұрын
What would be the max reliable crank HP for the stock turbo?
Not so much a maintenance issue but its worth mentioning that if you add power to these engines, you really should consider aftermarket head studs and head gasket.
@bolivarnunes2 жыл бұрын
What chemical would you use to run through the intake for the carbon build up?
@kylegentles22702 жыл бұрын
I would like to know too
@maperformance2 жыл бұрын
www.bgprod.com/catalog/gasoline-fuel-system/bg-gdi-intake-valve-cleaner/ This is what our guys recommend!
@OnlyAngel-ek6zy2 жыл бұрын
@@maperformance really? Our sales rep at work for bg says not to use it on turbocharged cars
@austinvelarde2205 Жыл бұрын
Salute! Now i can do maintenance on my si by myself 🫡
@joseescobar1772 жыл бұрын
Did you guys do one for the Subaru FA20DIT yet? Would like to hear your input on your wrx build and such.
@maperformance2 жыл бұрын
We have not done one yet, it's definitely on the list though!
@chrisg5352 Жыл бұрын
Thank you for the tips!! I’m subscribed!
@Grappler1302 жыл бұрын
Any word on those fueling system upgrades you guys had hinted at a while back?
@sussolus2 жыл бұрын
More tangents about being plugged up with carbon please
@hussali88382 жыл бұрын
2017 si sedan 120,000kms other than my injectors shit the bed she has been solid
@orcahang212 жыл бұрын
Great Vlog What is max / safe PSI boost for a stock L15b7 please ?
@dslynx2 жыл бұрын
Right! High boost pressures? What does that mean? 19.5? 21.5? 23? more? I'm not looking to drag race or anything, but if I get a ktuner and bump it up to 19.5 regular and 23 in sport, is that high?
@totljag12 жыл бұрын
For the oil dilution how often do u recommend oil changes to be on the safe side ? Every 2 k miles ?
@hyper85452 жыл бұрын
3k
@RMG7912 жыл бұрын
5k
@ROBMACDUI2 жыл бұрын
I think it really depends on your situation. If you normally drive 20-50 miles every time, you could likely stick with the guess-o-meter on the dash, but if your drives are very short then you risk dealing with fuel dilution and I would recommend 3-6k between changes.
@estebanmarquez29962 жыл бұрын
My friend is a Honda mechanic and he recommends to change it once it gets to 50% life
@OnlyAngel-ek6zy2 жыл бұрын
I Daily drive mine about 60 miles a day and I do it every 3k or till it gets to 70%.
@anthonyandrade28565 ай бұрын
My 19 Si ive had alot of problems with overboost and i actually had my first misfire the other day original spark plus 76k miles ez change. but with the overboost all ive done to my car intake and intercooler. i have it flash tunes but its the stock tune flash with just the rev hang tuned off. why am i getting overboost code? Also how many miles do you think this carbon build up will actually start to take a noticable effect on the engine. 10th over 11th biased opinion haha awesome video
@PLAYER4REAL2162 жыл бұрын
What is the best brand aftermarket motor mount
@bryantarroyo777911 ай бұрын
Whats the recommended gap on the spark plugs for a stock 2.0na on the 11th gen sedan
@joeburgess24642 жыл бұрын
Keepin' my FC Stock, making the EK a drag racer
@ap95792 жыл бұрын
Thoughts about the stock intercooler ?
@TheAutoDistrict2 жыл бұрын
if its anything like the 11th gen, its complete shit lmfao. highly recommend upgrading it.
@MrHappy672 жыл бұрын
@@TheAutoDistrict yeah the 10th gen intercooler heatsoaks pretty easily. Definitely needs an upgrade if you're going to be pushing the car.
@xo_dre072812 күн бұрын
Where is the oil pump located?
@vicp87722 жыл бұрын
My ac stopped cooling, Honda fixed it, no questions asked on their dime. 19 6sp sp touring here.
@NikolaTeslaEE11 ай бұрын
I just bought a used 2020 Honda Civic Si as a daily driver. No plans to mod or tune at this point. Anything I have to worry about now or in the future since I’m not adding power?
@luis6772011 ай бұрын
Would the same si performance clutch fit the 10thgen 1.5T accord ?
@brandonrivera56862 жыл бұрын
YOU GUYS ARE AWSOME
@Pika_Gabe8 ай бұрын
I used to have a mk6 gti so seeing the carbon build up was like seeing a familiar friend 🤣
@brayansoto41702 жыл бұрын
Thanks man’s 🙏🏼🙏🏼🙏🏼
@alwaysanovice2 жыл бұрын
For those of us, like your Mum, who own an exl and have some cash, what would you recommend for performance upgrades under $3000.00 as a kit? I'm 56 and in my first modern honda , 2018 exl civic. I have stepped out if my 420hp 2002 silverado. Throttle response is a safety feature in my book. And I miss it! 3 grand....what parts? I am all ears fellas!
@maperformance2 жыл бұрын
Give us a call at 1-888-627-3736 and we would be happy to find some modifications within your budget!
@boblast85062 жыл бұрын
Buy an si. For 3K if you trade it in you can probably get one. Big big difference overall
@dat3rdsideboy3862 жыл бұрын
@@boblast8506 I’m with you can’t wait till my si is paid off I’m going for type r
@FouledAnchor172 жыл бұрын
I was with y'all until ya said 11th Gen is better looking than Gen X. Lol! Great video guys!
@partypooper69822 жыл бұрын
Totally agree!!! I see the 11th gen beside me on a stop light and never have a felt more proud of me switching to the 10th instead of waiting for that VW looking car hahaha
@partypooper69822 жыл бұрын
I mean it’s beautiful don’t get me wrong and it’ll definitely have it’s market, but seriously every time I see one from behind I can’t tell if it’s actually a civic or not until I can read the logo, you can spot a 10th gen from a mile away and I like that about my car
@DB-mq4so2 жыл бұрын
@@partypooper6982 Because 10th gen has all those random plastic vent looking things slapped on the back that look like Ebay aftermarket parts.
@partypooper69822 жыл бұрын
@@DB-mq4so ahahaha okay they are not THAT bad, hater🤣. But no it’s the whole style of the back end, in either sedan or hatch, and obviously the taillights are a major giveaway that that’s a 10th gen civic in front of you:)
@ayyooojett23532 жыл бұрын
Y’all ain’t Bafoons man y’all gods to me 😭
@maperformance2 жыл бұрын
Thank you for your support!
@gr63952 жыл бұрын
Talk about suspension upgrades. Which suspension mods are best and at what cost.
@Tac_34032 жыл бұрын
tires, brakes, lowering springs/coilovers, beefy rear sway bar, front strut tower brace, probably in exactly that order is the best for these cars.
@ethanvance96852 жыл бұрын
When will the 10th Gen Civic Si Big turbo kit coming out or is it coming out? I Remember you guys saying it will be out soon 2 yeqrs ago and we'll it isn't out
@MnHondaSi2 жыл бұрын
How do we clean in carbon buildup?
@kenneth2405 Жыл бұрын
Do you think a thicker oil could help with the dilution problem? I heard that this is more common in cold areas and the dilution lower in tropical zones.
@maperformance Жыл бұрын
Correct, that is a common fix for parts of the world that are hotter than others. Here in MN most "higher" HP builds run thicker oil in the summer and thinner in the winter (if they're driving in the winter).
@kenneth2405 Жыл бұрын
@@maperformance thanks for the reply, good to know 👍🏽 I hope to buy a Si 10th Gen sometime and I would like to take it close to 240hp, is that possible with the OEM turbo?
@gotdammit Жыл бұрын
@@kenneth2405 Yes with an OTS tune alone, you're up to like... 220.
@CapitolTubeArmory2 жыл бұрын
Any plans to do one of these vids for the Q60?
@maperformance2 жыл бұрын
There's a possibility! We have tons of content in the mix.
@FlyingGentile2 жыл бұрын
2:59 reason why I went for a 20 corolla manny.
@Val_tini. Жыл бұрын
My 2017 EX-T w. 102k miles has only 25mpg… is that normal? Changed spark plugs & cleaned MAF sensor w. no progress.
@jacobfontain9924 Жыл бұрын
nice build but that alu weld straight off the turbo needs to go, ill pay you to it at this point.
@BT-OneOnly2 жыл бұрын
Thank you.
@joshua1608 Жыл бұрын
Don't forget PCV valve
@Monarky7772 жыл бұрын
Question... I have a mom's EXL and got a valve that got stuck clean it with some c foam got it working again but now I'm burning oil? Any ideas?
@Monarky7772 жыл бұрын
It's a 2016
@Monarky7772 жыл бұрын
Another question spraying a cleaner should it be sprayed right at the air filter past the air flow sensor. I talked with a Honda mechanic he said that's a long ways from the valves. Only place I have ever done it.
@markr.1984 Жыл бұрын
So you forgot about 1.5Ts blowing tons of head gaskets? Especially when run hi-performance. I drive a stock car, no goodies and drive it like a granny most of the time to get high MPG, and I had a blown head gasket. Mine is a 2018 EX-T sedan with 6 sp. manual.
@godemperormeow8591 Жыл бұрын
From what I've seen, cheap head bolts. The fix? Aftermarket head bolts.
@Dendrolab2 жыл бұрын
When do we get to see the update on the GR86 turbo?
@maperformance2 жыл бұрын
Tuning is the holdup at the moment! Someone has to crack the ECU.
@junesondrab3833 Жыл бұрын
What can be done about the excess carbon?
@maperformance Жыл бұрын
Like mentioned at time signature 4:13 you can walnut blast and throw in some additives!
@luissuntay8822 Жыл бұрын
Say! What about 1.5 turbo 2019 !
@Boatfisherz12 жыл бұрын
Just test drove a used 2018 Si with 61k miles. It didn't look like it was abused, BUT the exhaust was black indicating it was burning oil. I also smelled the oil and it smelled like gasoline, indicating it has the dilution issue. Again, this car was 100% stock, so Honda lost some of it's quality going with a small 1.5l non vtec turbo engine....and that makes me sad. Still, was a fun test drive, but I passed right when I saw the issues.
@wildez0072 жыл бұрын
Nice Prius V 👌
@ziggyz8345 Жыл бұрын
I hate how trash the oem clutch is, I mean you make a sports car that's boosted you'd could at least expect a clutch disk that can hold more than stock power levels, it's impossible to find anyone who does aftermarket clutches and I do understand the reasoning for that
@Sgtvalentini8 ай бұрын
11gen exhaust looks better in the back definitely
@austinwolfe23732 жыл бұрын
It bugs me there is literally no info like this on the 10th gen 1.5t accord or aftermarket clutch options available as well
@Candybuiltsi2 жыл бұрын
No point in modding it. Si 10th gen 1.5’s have forged internal from factory and are still weak. All other l15s are built with weaker internals
@boblast85062 жыл бұрын
What the other commentator said. The L15B7 in the si are really the only strong power and modifiable version. I would say intake+ lower boost tune maybe exhaust if you want it. That’s as far as you’ll get but will still be peppy and fun
@dslynx2 жыл бұрын
I don't think you guys could be any less specific. Air intake and a tune.. uuhh.. what kind of tune? High boost pressures? What's high? 19.5? 23? more?
@totljag12 жыл бұрын
Will running Lucas gas additive help with carbon build up or running 93 octane shell gasoline ?
@ROBMACDUI2 жыл бұрын
Since the fuel never hits the intake valves I don’t think any additive would help. The traditional mod that attempts to reduce carbon build up is a catch can. Other than that, you can simply wait till you start having a rough idle, then have them cleaned using a media blaster. Most dealerships can perform this.
@harryl82342 жыл бұрын
@@ROBMACDUI Catch can doesn't do shit. Have a Mishmoto catch can on my 2018 si for over a year and not 1 drop of diluted oil was found in the can.
@alexandernelson477 Жыл бұрын
Can you do the integra next 🥰
@N64Guy Жыл бұрын
HOLY SHITTT WATCH OUT FOR THE CAR BACKING UP BEHIND YOU, y’all ALL ALMOST GOT RUNNNN OVERRRRR!!!!!!
@amplifiedrecoil96392 жыл бұрын
10th gen >
@ROBMACDUI2 жыл бұрын
No way, 11th gen gets vtech on the exhaust valves and a twin scroll turbo, along with various type R parts such as the shifter and some suspension components. Only benefit to the 10th gen is you get heated seats, adaptive suspension, and way more storage compartments.
@DB-mq4so2 жыл бұрын
@@ROBMACDUI 11th gets rev match as well. 11th gen is missing all the fake plastic vent crap as well.
@LynnDisclose2 жыл бұрын
I have seen ex civics hatchback 10th gen beat 10gen civic SI,
@brolyassasin83542 жыл бұрын
Sometimes is not the car but the driver fact
@ShooterMcNut2 жыл бұрын
10th>11th. 11th only comes in a sedan.
@jamesmedina2062 Жыл бұрын
11th gen does not come in hatchback? REALLY?
@alexandernelson477 Жыл бұрын
Which is why I got the integra 🥰
@dw.203 Жыл бұрын
Yes it does?
@dw.203 Жыл бұрын
@@jamesmedina2062yes it does it’s only the type r that’s a hatchback
@dw.203 Жыл бұрын
No the touring does too
@rebeljones3931 Жыл бұрын
Cover the 11th gen SI
@dannydrexx2 жыл бұрын
what’s a safe amount of boost pressure on the Si? Because as of right now, I have a 2018 Si coupe and the mods that I have is a Ktuner pushing 21.5 psi with 22 psi at peak, MAPerformance Catted DP, Injen short ram intake, and MAPerformance exhaust. I was told pushing 22 psi is a bit too much on the stock turbo but I’ve also heard that 22 psi on the stock turbo isn’t that much but I don’t know which is the truth and what to believe so what’s a safe and reliable psi range to run? Someone help please
@maperformance2 жыл бұрын
21-22 psi is about as much as you would want to push the stock turbo. We have seen up to 25-27 psi, but the life of the turbo is not long!
@codcoller123456782 жыл бұрын
But when are we gonna get better injectors for these cars 😪
@isaiahwyd12 жыл бұрын
when are we going to get 11th gen videos
@maperformance2 жыл бұрын
As soon as we get our hands on one!
@DB-mq4so2 жыл бұрын
@@maperformance Have you gotten one yet?!
@sonofulti18592 жыл бұрын
The rear end of the new civic looks just like a 10th gen Accord.
@estebanmarquez29962 жыл бұрын
Has anyone experienced having issues with the shim plate on the drivers side warping and hitting against the rotor? Makes the most annoying screeching noise when making a left turn 😡 had my boy who's a Honda mechanic fix it for me like 5 times already. Ended up buying new ones and the issue came right back lol.
@OnlyAngel-ek6zy2 жыл бұрын
I think I know what your talking about I thought it was cv axles. when ever I do a full u turn I hear it
@estebanmarquez29962 жыл бұрын
@@OnlyAngel-ek6zy I thought it was the break pads at first but it ended up being that. My friend did his thing and it hasn't bent back ever since. Honda knows it's a known issue from 18 to 20 but have no fix for it yet 🙃
@britobrian7142 жыл бұрын
Yes I’ve had this issue as well. Just have to keep replacing it or Mod it somehow.
@MrHappy672 жыл бұрын
I just keep pushing it back in with a flathead screwdriver when it begins to squeak. Usually goes away for a few hundred miles.
@orcahang212 жыл бұрын
Good 👍 ASS job, keep it up PLEASE.. ✌.
@insanegixxerdude486 Жыл бұрын
Or just move at a more robust platform like a vw gti 😎
@beargang88532 жыл бұрын
The 1.5l sucks why I bought a k20c2 with 6 speed you can swap the k20c1 head and hood to go but the 1.5 you have to swap all internals to make it reliable with power
@ROBMACDUI2 жыл бұрын
Depends on what you are shooting for. Under 300hp and you’ll have no major issues minus swapping head bolts which can be done without removing the head. The K20 would require quite a bit more money to hit 250-280 than the 10th gen. Of course, the k20 would be able to get to higher numbers without replacing the bottom end but at that point I would think simply buying a more powerful factory vehicle makes a bit more financial sense.
@beargang88532 жыл бұрын
@@ROBMACDUI you are talking about the k20A im talking about k20c bro before you cooment you should read the k20c2 can handle 500hp np also the k20a can also sound like you never worked on a honda before the l15 cant handle 300+ because the crank brakes
@beargang88532 жыл бұрын
@@ROBMACDUI before you try to comment something again here some things about a k20c they have bigger sleeves better stock crank and Pistons they can handle alot of power and been proven check out the 400Hp 2017 civic on stock the guy just added a turbo k20a been proven it can hold more then 500HP stock but the k20c is better with power and more reilable the L15 is horable and brakes at 300HP
@ROBMACDUI2 жыл бұрын
@@beargang8853 Geez man relax. I’m not questioning the ability to hold more power but for those that don’t feel like spending thousands on mods you can add 80hp and over 100lb ft of torque reliably with nothing more than a $500 tune. For most people that’s more than enough and makes the most sense given you can have a pretty potent sport compact on the cheap without destroying its resale value by throwing a bunch of aftermarket parts on it and ruining its daily driving comfort. If aiming for big hp numbers then Why even bother with a fwd car. You’ll never be able to put down much more than that without upsetting the chassis and ruining its handling which is the strong point of these cars.
@beargang88532 жыл бұрын
@@ROBMACDUI naw you were saying how you know it cant hold power you got called out now. trying to say something else like i said don't comment if you don't know Honda Engines are the cheapest $ to power with Reliability anyway don't comment again till you work on one of these or have a question
@raymondreiff81702 жыл бұрын
So in other words Buy a Normal Civic Sedan like my wife did a 2020 Sport Sedan with the K20C2 engine and 6 speed manual No carbon or Fuel dilution with this Car, Because it doesn't have GDI or a Turbo charger it simply doesn't NEED it if you Want a dependable car for getting to work 🤓.
@raymondreiff81702 жыл бұрын
Yes I like good information like this video provides 👍🤑.
@turdferguson74382 жыл бұрын
The K20C2 is DI...
@boblast85062 жыл бұрын
Yes that’s the more reliable thing to do. However modifying you wouldn’t get 1/10 as far with the k20c2.
@raymondreiff81702 жыл бұрын
@@boblast8506 I didn't buy this to modify it, It's built for Great fuel mileage and reliability, Driving it Conservativly setting Cruise at 62 mph has shown to do 45 MPG, If you stomp on the Gas all the time You'll be lucky to get 34 mpg using 87 octane gasoline, If I wanted a faster Civic I would buy the Type R.
@thebumpban49592 жыл бұрын
T lx type S content
@maperformance2 жыл бұрын
Unfortunately, we no longer have ours!
@thebumpban49592 жыл бұрын
Does that mean no aftermarket support?
@ZakDavis2 жыл бұрын
11th gen is def where it’s at
@FU-Utube2 жыл бұрын
Bruh what. It's the same platform other than the clutch and a static suspension.
@sonofulti18592 жыл бұрын
It's literally a 10th gen Accord with a painted grille to match the body color
@DB-mq4so2 жыл бұрын
@@sonofulti1859 It "literally" is not an Accord, but a improved version of the 10th gen Civic
@shanepytko1342 Жыл бұрын
I wouldn’t listen to any advice from someone running supertech oil.
@thomasflii2 жыл бұрын
first lets goo
@maperformance2 жыл бұрын
And for that, a high five. 👋
@gigi94672 жыл бұрын
Geez dont why i feel like this is going to be one of the worse engines honda has made..
@TheLeebo132 жыл бұрын
1.5 10th gen worst motor ever made this is why i bought a k20c still not the great but can be fixed