The NEW Powertec Leg Press - The BEST Compact Leg Press Just Got Better

[@HomeGymHacksandReviews]

Powertec Leg Press: powertec.com/products/powertec-leg-press?ref=HGHR

[@Bro-siah]

Your genuine enthusiasm is contagious.

[@HomeGymHacksandReviews]

Thanks so much. It is truly genuine and I’m glad my enthusiasm for the brand is obvious.

[@gabriellaskey6798]

I'm a simple man I see new HGHR video, I watch and thumbs up 👍🏼

[@HomeGymHacksandReviews]

That’s what I’m talking about!

[@TheCarterHomeGym]

Another piece added to the collection! You pretty much have a Powertec showroom at this point! Well done review buddy.

[@HomeGymHacksandReviews]

Thank you, Carter. lol! I’ve thought that too.

[@adamjames3665]

Great review as always! I’ve had this on my wishlist since 2020 and this gives me more reason to pull the trigger. I love the changes and the ROM this has.

[@HomeGymHacksandReviews]

Thank you. If / when you get it, please let me know what you think.

[@jbsbayarea1]

dam you always convince me. I had my thoughts on another unit, but you made me think about something I haven't thought of. Keep up the good work man, been watching since I started my home gym journey.

[@HomeGymHacksandReviews]

@@jbsbayarea1 thanks so much. Since this video, I secured a squat wedge to the platform and put the Powertec Ab Mat behind my lower back. As a result, even with my back issues, I no longer need to lay the back pad all the way back. For me, the machine is better than ever. I have a couple KZbin Shorts showing what I’m talking about.

[@phatshah7377]

Ive got the old one, still great quality. Nice to see powertec continuing to improve on their products.

[@HomeGymHacksandReviews]

Very good to hear and I agree.

[@MajorTendonitis]

Liked and subscribed. Thank you for this review. I was going to buy a dual purpose machine , but they’re not great at either . I hear a lot about knee issues with hack squats , so maybe I’m not missing out . I’m 63 and my knees are not great from years of dirt biking , so I believe this machine may be a good investment.

[@HomeGymHacksandReviews]

@@MajorTendonitis thank you. I’m definitely not a fan of hack squats; they used to always hurt my knees and lower back…and I think I mentioned in this video, my initial lower back injury was on a hack squat. Since this video, I added a squat wedge to the platform and I put the Powertec Ab Mat behind my lower back. As a result, I no longer need to remove the back pad adjustment tube and I like this machine now more than ever after my modifications. Some of my recent videos show what I’m talking about. If you get it, please let me know what you think.

[@MajorTendonitis]

@@HomeGymHacksandReviews I’ll definitely be getting it as I don’t see a lot of other options . I’m just lucky that the new design came out and they addressed that loading issue. The only thing I would change is I’d make the foot plate angle adjustable ,but you can’t have everything

[@tribaltek]

This solves all my gripes with my ‘19 version. Won’t be selling to replace, but great changes for those who are buying a new one. Also, I agree with you that the compact leg sled slightly edges out the leg press.

[@HomeGymHacksandReviews]

As my title suggests, I think the old Powertec Leg Press is the best in its class. Now, with the updates; it’s head and shoulders above its competitors. Interesting to hear about the Compact Leg Sled. I thought I was one of the only people to think that. Appreciate your insight.

[@thomaspham-qf4ry]

@@HomeGymHacksandReviews why won’t you replace it with the new one do you like old one better ?

[@Azviman03]

knowing this might be a bit outside your market, but would like to see your review of the york sts 35 degree leg press.

[@HomeGymHacksandReviews]

If I have the opportunity, I might give it a try. Thanks so much.

[@manuelsamberger9438]

Already got the powertec compact leg sled and absolutely love it. But still enjoy to see you testing their new stuff. Keep up the good work 👍🏻🫶🏻

[@HomeGymHacksandReviews]

Great to hear you’re happy with the Compact Leg Sled. I really appreciate it.

[@NoEgoPhysique]

The 5º incremental seat angle adjustments are impressive for something at this price point. Great video, thx.

[@HomeGymHacksandReviews]

Thank you. I agree.

[@stormlord3309]

Great update . Did consider purchasing this a few years ago but quite happy with my pendulum and belt squat now . Good to see powertec updating the equipment. Wonder what will be next . Keep up the great content HGHR .

[@HomeGymHacksandReviews]

Thank you, SL. I’m not sure what’s next, but I’m looking forward to it. Good to hear you’re happy with those two pieces.

[@blazefury8336]

It definitely looks like an improvement on the previous model. I have the previous model and mine has started to grind a bit with heavier weights. I've been using your Angles 90 hack you had in a previous video and it helps a lot with being able to hold myself in place. I find I can't reach the handles without holding a crunch. I wish they would have made the bottom safety adjustable. I like to go deep, but find I don't really have a usable safety when I do. I keep thinking about selling mine and buying a pendulum squat.

[@HomeGymHacksandReviews]

Have you tried spraying the guide rods with dry silicone spray? And / or just making sure all the bolts are tight?

[@arov235]

Great video as always!! I have terrible ankle dorsiflexion as well. Trying to work on it daily though.

[@HomeGymHacksandReviews]

Thank you. I had a whole section in this video about the “Sissy Leg Press,” where I position my feet low on the platform and allow my heels to come up. It’s a very good exercise. Ultimately, I just left out that portion of the video so the review wouldn’t be over 15 minutes.

[@RastaMan3000]

I purchased the lat-pull-down machine and unfortunately was missing 2 boxes of the weighted plates/stickers for it also the "powertec" sign was missing the screw adapters all on one column so It's not secured down properly and finally a plastic piece from the knee adjustment part was broken....parts come in this Saturday , hoping everything is there and I can use my new machine. The packaging was top notch I will say with no sign of damage to the boxes with wrap all around securing the boxes but maybe powertec could use a better quality control check before parts going out. This machine is very nice when setup and takes very little space, I put weight on the weight horns to give it a try and was impressed with how the machine felt. Eager to get the rest of my weights in !

[@HomeGymHacksandReviews]

I’m sorry to hear about that mishap and normally I don’t hear things like you experienced. I hope everything is taken care of and I hope the lat pulldown works really well for you.

[@RastaMan3000]

⁠@@HomeGymHacksandReviewsI am happy to report powertec has sent me my missing weight plates as well as a whole new beam with screw adapters in place AND the small plastic piece that was broken (machine doesn't even need it honestly). They even sent me two versions of it ! ...and extra plate stickers. This was my first purchase of powertec and certainly not my last. Mistakes happen. Powertec did not hesitate to help me !

[@HomeGymHacksandReviews]

@@RastaMan3000 that is great to hear. I was thinking about your situation this morning and planned on messaging you to see if everything was taken care of. I appreciate the update.

[@AliciaNicole19]

Does it hit calves really well? Def a priority when I buy

[@HomeGymHacksandReviews]

@@AliciaNicole19 it is great for calves.

[@louisdek2416]

Thank you for this review, I hope that Powertec will quickly update their pec fly attachment to give it a good resistance curve that is almost perfect because in my opinion it is the product that needs an update quickly

[@HomeGymHacksandReviews]

Thank you. Have you seen my updated review for the pec fly? I changed the handles’ configuration (very easy to do) and added functional trainer handles and / or Ab Straps and the resistance profile is amazing. In fact, I liked my modification so much, I sold my Titan Pec Fly / Rear Delt Machine.

[@louisdek2416]

@@HomeGymHacksandReviews yes I saw it I remember the hack, if powertec does not update their pec fly in these cases I would buy it anyway and I would use your hack

[@HomeGymHacksandReviews]

@@louisdek2416 I couldn’t be happier with it.

[@jamesjacob6841]

Thanks for a great video! answered all the questions i had

[@HomeGymHacksandReviews]

@@jamesjacob6841 thanks so much! I used this machine this morning. Since this video, I added the Powertec Ab Mat behind my lower back and put a squat wedge on the platform; as a result, I no longer need to hack the back pad. One of my recent KZbin Shorts shows these modifications in action.

[@jrddoty]

Great review! If you had limited space and could only pick one, would you take the Powertec Leg Press or Rogue Belt Squat?

[@HomeGymHacksandReviews]

Thank you. I would take the Rhino due to increased versatility, but it’s an extra $1k.

[@stevenbean09]

I watch all of your videos and excited to start investing in the powertec eco system. I keep going back and forth between this press and their angled leg sled, now that you have used both extensively, if you could only choose one, which would it be? Updated press or updated sled?

[@HomeGymHacksandReviews]

@@stevenbean09 it’s really a tough call for me now that I’ve put a squat wedge on the platform of the Leg Press (shown in my most recent video). If you’re really strong, the LP is probably a better option. If you have any lower back issues, go with the Sled. Luckily, they’re both made with the same level of quality.

[@stevenbean09]

@@HomeGymHacksandReviews I went to my local fitness store and tried them both and I absolutely loved how the leg felt compared to the press. I could get deeper without feeling like the weight was slamming into my guts or feeling it in my back. My ONLY reservation now is the scraping nose as you glide up and down. Is it a problem for you? And trick to get around this? Not sure if this is something to care about or if it can lead to future wear and tear with consistent use.

[@HomeGymHacksandReviews]

@ very good to hear. The scraping only occurred with the old sled. The new one is good. I have an updated review for the new model and you’ll be able to hear (or really not hear) how quiet it is.

[@karat99-y6i]

Will you review ritfit’s 2-In-1 Leg & Hack Machine?

[@HomeGymHacksandReviews]

RitFit contacted me and asked me to, but I politely declined for the time being. I feel like too many people have reviewed that piece of equipment and I’m not sure how much extra value I can bring above what’s already been presented.

[@MedStopPharmacy]

Great review, i was debating between a straight leg press machine and a combo one with a Hack squat and this video helped answer the dilemma i am having. In your opinion do you pretty much hit all the leg muscles with this straight leg press that its unnecessary for any potential benefit from a Hack squat combo machine?

[@HomeGymHacksandReviews]

@@MedStopPharmacy thank you. The advantage to one of the combo machines is increased variety; although, some of them lack a full ROM and the footplates are too small for a variety of foot positions. Luckily, with the Powertec LP and Sled, the footplates are huge. The Hack and LP will both hit your quads, but I just don’t like hack squats (personal preference), I do really like the Sled however.

[@Torben118]

Very good summary for this fantastic product. Your Daisy Chain Hack is also brilliant! Best wishes from Germany, Torben

[@HomeGymHacksandReviews]

Thanks so much.

[@Torben118]

@@HomeGymHacksandReviews Very helpful insights. I like your passion for the Company. We have the competitor ATX here in Germany, but I will chose Powertec, especially with their Leg Press Attachment for the Workbench, which is very interesting and important for me. Won’t forget your code btw….

[@HomeGymHacksandReviews]

@@Torben118 thanks so much. I am really passionate about Powertec…I know how effective, durable, and versatile their equipment is. Unfortunately, my code only works in the US.

[@Torben118]

@@HomeGymHacksandReviews Ah, OK. Yes, they have a real good reputation. Can’t even imagine going back to commercial Gyms. That was one positive development from the Lockdowns for me, switching to Outdoor and Homeworkouts….

[@HomeGymHacksandReviews]

@@Torben118 the Y is the closest gym to me and I’d much rather lift in my garage. I have a Golds about 25 minutes away, but no desire to ever step foot in a commercial gym again (unless on vacation).

[@Jaymann420]

I just wanna buy a leg press that has the foot pad angle that is similar to the arsenal leg press. One that allows full range of motion without over stretching your ankles.

[@HomeGymHacksandReviews]

@@Jaymann420 I recently attached a squat wedge to the Leg Press plate and it is phenomenal. I also added the Powertec Ab Mat behind my lower back. With the combination of those two things, I no longer need to lay the back pad all the way back. I have a couple recent KZbin Shorts showing what I’m talking about.

[@scorer3418]

Man i wish you could get your hands on an atx levergym for a review!

[@HomeGymHacksandReviews]

I’ve talked to ATX. It looks like they are getting closer to making their equipment available in the US.

[@Marine531]

Great review and informative as always. I wonder if Powertec would throw their hat in the ring into making a hack/leg press combo (space saving). I currently own the body solid, which is great on space but want a smoother upgrade. Powertec’s combo would certainly be better than Titan and would be interesting how it compared to forceUSA and body craft. Any discussions on your end about Powertec making a hack/press combo?

[@HomeGymHacksandReviews]

Thank you so much. I don’t know of anything like that in the works, but I’m not privy to products in early development.

[@erickurth3654]

It seems like the best hack squat machines are about 30 degrees (e.g. Atlantis Strength) Most leg press machines are 45 degrees. Maybe that’s why Powertec went with two machines - their compact leg press is 30 degrees.

[@babygiantbarbell1014]

Looks good, HGHR! I just went the ForceUSA route (wanted hack squat also), but this model looks great!

[@HomeGymHacksandReviews]

Thank you, BGB. I hope you like that as much as I like this.

[@eddiesaenz4123]

Hey brotha, love your content!! I too have a multipress bench, but havent been able to use it yet due to having surgery on a torn pec tendon.. one question, are you able to do squats on the multipress? Maybe bench squats if you move the bench all the way back at a decline? 🤷‍♂️ let me know if youve tried that or if its possible, thanks 👍

[@HomeGymHacksandReviews]

Thank you. It really doesn’t work well. The lever arms’ attachment site is too low and the bench gets in the way. I hope your pec heals quickly.

[@eddiesaenz4123]

@HomeGymHacksandReviews I appreciate the reply!! And I kinda figured that, but was a bit hopeful lol.. thank you, little time in a sling and then rehab begins 👍💪 keep doing what your doing buddy!! You've got a strong community and following

[@HomeGymHacksandReviews]

@@eddiesaenz4123 appreciate that very much.

[@marywalton293]

Nice upgrades to an already great piece of equipment!

[@HomeGymHacksandReviews]

Very true. They knocked it out of the park.

[@thebodybeatdownDiTi]

looks good. I will say since the 90s ive always wanted a hack press/leg press combo. BUT as you know i bought the Titan compact hack press a couple years ago. I liked it "ok"..My issue with those machines is the angle is just to relaxed. Id rather it be more 45 degree or close to it OR even a bit more. The new leg press looks great. Glad they fixed a couple of the issues. I dont see me ever buying another dedicated press or hack machine. BUT never say never lol.. Have a good day HGHR..

[@HomeGymHacksandReviews]

Thank you, BBD. This would be a great way to complement your heavy squatting 🤓

[@twistedbarbell3950]

Well thought out and thorough as always!

[@HomeGymHacksandReviews]

Thank you, TB!

[@briand5047]

Looks great. Other reviews of other brands of home leg press and leg press/hack combos have been underwhelming.

[@HomeGymHacksandReviews]

Thank you, Brian.

[@danm4874]

Glad to see they updated the machine but I’m disappointed that they didn’t seem to do anything about the range of motion. I had one of these and returned it because the ROM was subpar. I don’t know why they are still welding the bottom stops onto the catch bar. They should allow you to set the depth of the press all the way to the bottom if you’d like. Unfortunately, it’s just not worth the money if you have to use yoga pads to get deep enough.

[@HomeGymHacksandReviews]

It might go lower than the previous models. If you look at the section where I show the different carriage settings, my knees are pressed into my chest.

[@thomaspham-qf4ry]

Does this new one offer more rom ?

[@HomeGymHacksandReviews]

@@thomaspham-qf4ry if you go to the 6:27 point of this video, you can see the lowest depth the carriage travels. It feels like it goes lower than the previous model, but as you can see, I physically couldn’t perform any deeper of a leg press or my thighs would be going through my chest.

[@thomaspham-qf4ry]

I’m cutting the stopper at the bottom when I’m buying it why don’t you just do that ?

[@johnpain8380]

Nice review as always buddy. So the big question as I see it, is... what are you getting for the extra money from the new leg press over the new leg press attachment? Not having tried either of the new machines, I am assuming we have a greater weight loading potential from the dedicated machine over the attachment? Or do you think the way the attachment takes less weight to really load the quads, the new 400lb capacity is also enough for most people not to be able to max out with reps? One example to put what I am talking about is... I can just about max out a 138kg (300lb) stack on a hammer strength leg extension at the gym (on a so called 1:1 ratio), yet on my body solid G6B at home I can only manage 120lbs (on a 1:2 ratio) under the same HIT conditions. The Leg ex. Powertec attachment is also nice for both exercises, but easy to max out on the 90-100kg (200lb) weight loaded post. To note..The G6B is a fantastic and convenient cable leg ex that does take a 10mm gym pin well enough. All things considered and to confirm my question, If both Powertec Leg press machines here in question cannot be easily maxed out, what are you getting for spending the extra investment in the leg press machine over the attachment? Or is it a case that the attachment is easier to max out?

[@HomeGymHacksandReviews]

Hey. Thank you. Convenience is one of the big differences. While I have two attachment tubes (one on the Multipress and one on the FID Bench), most people likely only have one attachment tube. So, there will be the need to connect and disconnect LPA if using any of the other attachments or if someone is using the FID Bench for dumbbells and barbell work. Also, LPA is more of a horizontal press while LP is a true 45 degree leg press with a 1,000 pound max weight capacity. I can max out LPA for a rep or two, but 600 pounds is likely as heavy as I’ll need to go on the LP. Also, I’ve seen some people who have only enough space for the Multisystem in a spare room in their house and the LPA is the only additional leg machine they have room for.

[@johnpain8380]

@@HomeGymHacksandReviews Thanks for clearing that up HGHR! I agree about the multi system. I have mine in the center of the room, and although I can plug in and use all other attachments in to the multi press part of the multi system, I could not quite get the LP attachment to stretch out fully without hitting the wall. Luckily like you I also have the FID bench from the lever gym. I agree that having a second plug in for the Powertec attachments opens up a lot more options if or when needed. As a side note, the plug in part on the Lat/ab station on the multi system is set higher and tends to fit the preacher and leg ex. in particular to a better height, in my opinion. I would love to see you review the multi system one day if ever you do logistically get the chance to set one up in your gym, as you are the man who would surely come up with some great hack as per always. Thanks again for taking the time to answer my question about the leg press as I was curious. Cheers.

[@HomeGymHacksandReviews]

@@johnpain8380 sounds like you have an awesome set up. I’m sure at some point I’ll give the Multisystem a review. Anytime. Thanks so much.

[@johnpain8380]

@@HomeGymHacksandReviews Thanks man. Your gym also Is awesome. Yes I have a full commercial half rack and G6B, but as such no space for a smith machine or dedicated leg press. But I like you i have my personal first choices in the current set up, having to give way to the other pieces only out of necessity. I am very grateful to be so fortunate to have the space for such a home gym, as this has not always been the case for me. To read that you may one day review the multi system is fantastic news to me, as I know you would probably find a bunch of self made improvements for the system! I think the lat station on the whole is under reviewed and under rated despite the handles being only so so. Cobra grips or shortened length angles 90's are my remedy for that. Center bar is better as standard in my opinion. I can only hope you do one cover the system one day mate.

[@HomeGymHacksandReviews]

@@johnpain8380 the lat station is the area I’m most interested in trying because the pressing station and leg station are basically the same as the Multipress and Leversquat.

[@Blitz88ITA]

After only one day from powertec announcement 🔥🔥🔥

[@HomeGymHacksandReviews]

Perfect timing! 🤓

[@LukesGarageGym]

Light years better than mine lol they know how to make good equipment

[@HomeGymHacksandReviews]

It’s very well made and some serious thought went into this design. You’re right, Powertec has awesome equipment and it’s only getting better.

[@Azviman03]

look like a nice update. unfortunately the range of motion this allows is too limited. the safety stop is set too high and is not adjustable

[@HomeGymHacksandReviews]

Did you see the section where I showed the range of motion for each setting? My knees are in my chest and this was with the back pad in the most declined position. The ROM is extremely good on this machine.

[@Azviman03]

@@HomeGymHacksandReviews I did. while this range of motion might be acceptable for most, it is not enough for me. watching the rest of the video when you're using it, I can see the safety stop coming into contact with some of your movements. especially the further you lay the back pad down.

[@HomeGymHacksandReviews]

@@Azviman03 that’s after I removed the back pad tube and laid the back pad horizontal because of my lower back issues. If I may ask, how tall are you?

[@thomaspham-qf4ry]

The machines looks smaller which is a good thing with the less 2 upright does it feel smaller to you?

[@HomeGymHacksandReviews]

The footprint is almost identical to the previous model.

[@thomaspham-qf4ry]

@@HomeGymHacksandReviews look up INVICTUS ADJUSTABLE LEG PRESS bolt fitness you are going to laugh it’s the exact copy of the powerteclegpress before this one

[@thomaspham-qf4ry]

@@HomeGymHacksandReviews I wish I can use both of them with super heavyweight next to eachother so I can which one feels more stable

[@HomeGymHacksandReviews]

@@thomaspham-qf4ry this machine has 5 points of contact and the last one had four. I don’t notice a difference.

[@thomaspham-qf4ry]

I’m planning to use this leg press with no shoes in the video at around 8 where you are pressing at the curvy part do you think if I use no shoes it will feel uncomfortable ?

[@HomeGymHacksandReviews]

I haven’t tried the exercise shoeless so I can’t be certain. I’ll try to remember to give it a go the next time I use it and reply to you.

[@Blitz88ITA]

imho if they make the footplate adjustable in different angles, they will achieve the definitive model.

[@HomeGymHacksandReviews]

That would be cool but it would require a complete redesign of the machine because the lower and upper weight horns are connected to the footplate. The Compact Leg Sled offers that feature but I’ve always used the closet platform setting…even on the first model I had.

[@DeepVoicedOne]

I wonder if Powertec would sell the new angled footplate individually for the owners of the previous model leg press that want it and if it's compatible with the previous one?

[@HomeGymHacksandReviews]

I am not sure. It may be worth sending an email and asking.

[@Markinator83]

the sled looks the same, I think it is compatible. I Would email and ask.

[@thomaspham-qf4ry]

I emailed them and they say that they are interchange kits $60 they told me email powertec or call them in the morning that’s what I did

[@thomaspham-qf4ry]

They are interchangeable I’m ordering the diamond plate already

[@DeepVoicedOne]

@@thomaspham-qf4ry Nice, thanks for inquiring about it and rightfully so that they do allow it to retrofit improvements for previous model buyers.

[@timk8258]

Can you load 45’s on the bottom weight horns and go to the full depth of the machine, or will they hit the floor?

[@HomeGymHacksandReviews]

@@timk8258 Tim, I just went and double checked because I typically don’t load those posts, but I bottomed out the machine and 45s on the lower posts do not hit the floor.

[@timk8258]

@@HomeGymHacksandReviews Thanks man, appreciate it!

[@ascendedkoi]

Going to forsure get one this black friday.

[@HomeGymHacksandReviews]

I hope you like it as much as I do.

[@thomaspham-qf4ry]

How does the powered leg sled feel does it feel like a mini hack squat to you ? I have bad knees

[@HomeGymHacksandReviews]

I like it better than a hack squat machine because there is no spinal loading. I think it’s very knee-friendly. I have a review for the new Compact Leg Sled if you haven’t seen it.

[@thomaspham-qf4ry]

Okay I just bought the new leg press the old one has the 2 extra leg platform this one doesn’t does the old feel a lil more solid with the extra 2 leg on the back ?

[@HomeGymHacksandReviews]

@@thomaspham-qf4ry I don’t notice a difference in stability. Please let me know what you think when you get it assembled and have had a chance to use it.

[@Theking196]

What does it measure in width and length minus the seat? Trying to see if I can fit it in my space but getting different numbers for dimensions when I look online. Since you also have the leverage squat machine, how does it compare? Which do you think will be better for overall leg and glutes development? May only be able to fit the leverage in my space so wondering if I would miss out by not getting the leg press.

[@HomeGymHacksandReviews]

@@Theking196 I like the Leg Press better because I don’t need to worry about my lower back, but both are great for leg development. I am not home to double check the measurement without the back pad, but during the specs portion of this video, I mention the machine’s dimensions.

[@Theking196]

@@HomeGymHacksandReviewsthanks for the reply. Do you think they’re equally good for glutes? And overall mass on legs? I don’t have any back issues but that may be a factor down the road when stacking more weights

[@HomeGymHacksandReviews]

@@Theking196 I think so. Foot position will largely determine how much your glutes get involved.

[@thomaspham-qf4ry]

I got a question the older one before this one the handles are kinda hard to reach for me is this new updated version are the handles closer or no?

[@HomeGymHacksandReviews]

Totally different handles on this model which are very easy to reach. At some point in this video, I mention that issue with the older model and I show how I hacked the older model to improve the grip position. Also, during the machine updates portion of this video, I show the new and improved handles and talk about their dimensions.

[@thomaspham-qf4ry]

@@HomeGymHacksandReviews my sister is 5ft 4 you think it’s still easy for her to reach

[@HomeGymHacksandReviews]

@@thomaspham-qf4ry I think on the lower setting she will be fine but I can’t guarantee it. Around the 6 minute mark, I show all of the settings which may give you an idea how well it will fit her.

[@thomaspham-qf4ry]

Is this more compact the Titan fitness leg press hack squat ?

[@HomeGymHacksandReviews]

Yes. It isn’t as long or as wide as the Titan.

[@thomaspham-qf4ry]

@@HomeGymHacksandReviews does it have a bigger foot plate or diamond plate then titan?

[@HomeGymHacksandReviews]

@@thomaspham-qf4ry both have diamond footplate, but Powertec’s is much bigger.

[@thomaspham-qf4ry]

An yo even out your feet at the curvy top part ?

[@thomaspham-qf4ry]

Hii please help me get this answer I was wondering if I buy the new one and if I buy the old one can I use the new one and switch the new diamond plate for the old one so I have the new version but I only keep the old flat diamond ? Can I do that since you have both do you know if I can do that

[@HomeGymHacksandReviews]

I am sorry. I don’t know for certain. I will say, I like this plate better than the old one. Also, for quads, a lower foot placement is better, which is the foot placement I predominantly use on this machine. However, I find the highest foot placement on the new platform with the tip of my shoe pushing against the lip a better leg press than a high foot placement on the old platform. Powertec may be able to answer your question with certainty, but I honestly think the new plate is better.

[@thomaspham-qf4ry]

@@HomeGymHacksandReviews the old one my feet when I leg press at the bottom it doesn’t stay flat the new will be the same ?

[@HomeGymHacksandReviews]

@@thomaspham-qf4ry yes. It sounds like your dorsiflexion needs work (as does mine). When I take my feet slightly below the bend in the platform, my heels stay planted pretty well.

[@thomaspham-qf4ry]

Can you do me a favor can you leg press it at the curvy top part like you did around 8 but do it with no shoes and tell me if it doesn’t feel comfortable

[@HomeGymHacksandReviews]

I tried it today with (4) 45s and it didn’t hurt. The diamond plate is noticeable, but by no means is it painful.

[@thomaspham-qf4ry]

@@HomeGymHacksandReviews I have no clue why they added that new lip part I hate it

[@HomeGymHacksandReviews]

@@thomaspham-qf4ry I think it’s an improvement.

[@rexpeckinpaugh4307]

What is the maximum hieght of someone who would use the compact leg sled?

[@HomeGymHacksandReviews]

I am not entirely sure. Powertec regularly features an athlete who is 6’3” using their equipment. For me, I am on the middle safety and I am 5’9” The safety that’s higher than the one I use should easily accommodate someone who is taller than 6’

[@stuartcoster]

I have one and I am 6ft3 and there plenty of space left on the range of movement for me. This is the best leg machine I have for sure. I can easily do calf raises on the calf block and still not hit the limiter.

[@HomeGymHacksandReviews]

@@stuartcoster thanks for providing that feedback.

[@bobbyhunt3009]

The Powertec is the Best Leg Press machine within this price range and it is the best value of all Leg Press machines. You are the King of hacks, you do love your hacks Surprised me to know you like the Leg Press when it has been noted by Scientists and everyone how bad they are for lower backs, to the point where most Bodybuilders even Mentzer said they are a terrible machine to use.

[@HomeGymHacksandReviews]

Good to hear you say that BH. With my hack, I am willing to guarantee it’s lower back friendly. If not, I’d be in a world of hurt because my back is very sensitive.

[@thomaspham-qf4ry]

I don’t get why they curved the top on the new one ??

[@HomeGymHacksandReviews]

I cover that portion of the platform at 8:12

[@madmartigan3921]

If I could only get 1 machine, press or sled?

[@HomeGymHacksandReviews]

For most people, I recommend the Leg Press because of its higher weight capacity, but I like the Sled better. Close to the end of the video, I address this topic in more depth.

[@madmartigan3921]

@@HomeGymHacksandReviews thanks

[@thomaspham-qf4ry]

Hi I just got done assembling the machine out the safety stop with the rubber only one side touched the rubber the other side doesn’t does yours have that problem

[@HomeGymHacksandReviews]

No. It sounds like something is not assembled correctly or tightened all the way.

[@thomaspham-qf4ry]

@@HomeGymHacksandReviews how tight did you tighten screws ?

[@HomeGymHacksandReviews]

@@thomaspham-qf4ry tight, but not as hard as I possibly could. When most people have issues assembling the leg press, it’s because the top horizontal bar is not completely tight. Also, as I mentioned in this video, make sure the Powertec sticker on the back vertical bar is facing out.

[@thomaspham-qf4ry]

@@HomeGymHacksandReviews did you ever get power tec leg press that some things were a lil uneven ???

[@HomeGymHacksandReviews]

@@thomaspham-qf4ry I’ve had 3 of them and never had an issue. My very first one I thought there was an issue, but it turned out to be an assembly error on the top horizontal bar not being secured into the guide rods and uprights properly. As soon as I tightened the bolts that secure into the guide rods, everything was perfect.

[@TheGhu123]

looks like a toss up between teh sled or the press. I guess it has to come down to the space.

[@HomeGymHacksandReviews]

For most people, I recommend the Leg Press due to its higher weight capacity. I’ve always liked the Sled a little better.

[@TheGhu123]

@@HomeGymHacksandReviews Iam leaning towards the leg sled as it is smaller and the range limiter is good for knee rehab.

[@HomeGymHacksandReviews]

@@TheGhu123 my wife has really taken advantage of the range of motion limiter on the sled while recovering from hip and knee surgery.

[@50CalFitness]

Great review.

[@HomeGymHacksandReviews]

Appreciate it.

[@jacob5978]

The angel is too high. I'd prefer a leg press with guide rods at around 35°

[@HomeGymHacksandReviews]

Sounds like you’d like the Compact Leg Sled better because those guide rods are angled at 30 degrees.

[@jacob5978]

@HomeGymHacksandReviews that basically a hack squat and not got for.my knees because most platforms don't go out for enough. I'll buy a press that's at 30- 35°

[@HomeGymHacksandReviews]

@@jacob5978 my knees and lower back are pretty sensitive. I haven’t had any issues with the compact leg sled. The platform and back of the seat offer quite a few adjustments. It’s definitely a machine to consider if your search comes up short.

[@MetalsForBrunch]

if only the white rollers aren't plastic. 😢

[@HomeGymHacksandReviews]

@@MetalsForBrunch nylon sounds a little better than plastic 😉 they’re tough; the machine has a 1,000 pound max weight capacity and I’ve never heard of the nylon wheels needing to be replaced on the most recent models.

[@BENZK-j9t]

This a paid review?

[@HomeGymHacksandReviews]

No. I’ve never been paid for a review.

[@BENZK-j9t]

@@HomeGymHacksandReviews Cool, was looking at the titan but this looks much better design. and cheaper.

[@HomeGymHacksandReviews]

@ the Titan is a combo machine, but I would take this over the Titan…I think Powertec’s stuff is much better quality.

[@BENZK-j9t]

@@HomeGymHacksandReviews i agree with powertech legs sweep is larger

[@BENZK-j9t]

@@HomeGymHacksandReviews buying the powertech Leg press!

[@leftwinger764]

I absolutely disagree with you when it comes to not being able to train the hamstrings/glutes on a leg press machine. If you widen your feet and place them slightly outwards and very high on the platform (toes may even extend above the platform), you will definitely train your hamstrings and glutes!

[@HomeGymHacksandReviews]

Hey LW! I’m just sharing what the literature shows. There are a lot of people much smarter than me and more versed in biomechanics who support what I shared in this video.

[@leftwinger764]

@@HomeGymHacksandReviews I would almost say so many scientific tests, so many different outcomes. I definitely follow several quality sources, but I also rely on my own experience, which shows a shapely glute and well-developed hamstrings 😂 hence my counter-reaction on this one.

[@HomeGymHacksandReviews]

@@leftwinger764 lol! Nice description of the results you’re seeing. I definitely don’t want to discourage those gains. 🤓

[@leftwinger764]

@@HomeGymHacksandReviews😂

[@nicks5317]

@@leftwinger764Definitely can’t train hamstrings on a leg press. Glutes you can for sure though 🤙🏼