THE NICEST PART WE EVER BOUGHT AND ITS FOR THE FIRST GEN CUMMINS!!!!

[@_greg_a]

Thanks everyone for 70k!!!

[@hemihayden]

GREG_ALBERALLA no Greg thanks for the great entertainment

[@rickygonzales4523]

Greg a will be at 100k+ by the end of the year for sure great videos keep up the hard work bro...👏👏👏👏👏👏👏👏👏👏🖒🖒🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

[@redneckbig11]

Greg A thank you for all the awesome content and taking time out of your day to make these videos your trucks are super awesome and the wrenchworkz products are super awesome as well I'll watch your videos all the way to the end lol

[@timarnold4901]

GREG_ALBERALLA no boost is spending waayyy too much time with 'ol Bernadette.

[@sevenduecec1036]

You deserve it, and more.

[@Gemidrift]

I want to see Greg at 100k within 2 months tops . Make it happen people

[@sandman-gl2kg]

Gemidrift Greg A deserves a lot more than that though

[@Blyndsyde8]

Congratulation Greg on 70k!. The first gen is looking good 👍

[@bryanb7918]

If you pull out the front seal on the ve pump, clean it all up, and install a new seal with red thread locker around the outside, then you should be good for 20psi. Im running an electric lift pump for a vp44 pump truck on mine

[@randalsteubing9499]

Have you looked into a M&H timing spacer? It was one of the best things I did for my 1st gen engine. Could peg pyro before and now won't go over 1300

[@levijackson3797]

You dont need to apologise as much Gregg. We all have alone time garage rage. You almost seem like a paid actor considering how cool you stay. My garage sounds like a domestic disturbance 80% of the time. Congrats on 70k!!

[@TheBCSledder]

Levi Jackson haha I hear ya there

[@levijackson3797]

Where you at in BC man?

[@TheBCSledder]

Levi Jackson Northeast BC about 4 hrs north of Prince George. Where are you from?

[@levijackson3797]

I live on Vancouver Island but I work in northern bc and alberta. Just got home from Fort St John actually. Fires were nasty in your area this summer fuck around.

[@TheBCSledder]

Levi Jackson Fort st john is exactly where I'm from actually haha fires weren't bad for us this year, although last year we had some bad ones.

[@redneckbig11]

Awesome awesome video Greg A yeah 13 psi is all you want on it at idle and I think the pressure goes to 10 at open throttle

[@RobertKohut]

Nice! Love the roll pan! Looks like the headlights work great!

[@kentpellerin36]

I like the look of the non paint job but all black that 1st gen would be so much nicer.

[@jessenp20162725]

Congratulations on 70k!!!!!!!!!!!!

[@chettudy455]

I think the first gen should make a quick trip to mexico before the event and forces

[@brandonalsleben9756]

Congrats Greg on 70k!! Hard work!!

[@illmk6525]

Awesome channel , ever since you got the first gen made me start looking for one !

[@rustyduplechian1456]

Your channel is great and no need to apologize!! Keep up the great work!!

[@tomdebaise353]

Love your first gen bruh. The hood even creeks like my first gen when you open it.

[@wesleytruax2469]

can't get enough of this channel wish there was enough content for 24 hours a day i would never sleep!

[@shonnbeierle3370]

No worries Greg. Still like watching your videos. For me it don't have to be to detailed.

[@TheRejectful]

Love watching the videos every day and seeing the subscriber count slowly creep up there. Greg is making a name for himself!

[@pistalpete6053]

Hey just wanted to tell you. I had no idea Who you were Until @youtube callout. It really sucked to see The triple Turbo blow up. But anyway I've watched every day since Love the content love the trucks. Hope to see the 1st Gen At the next call out.

[@smcox1991]

Dang it I was hoping to see the forces on the first gen.

[@forzainformer]

same! hey man i see your truck run through my feed all the time still, its lookin' great smcox1991

[@smcox1991]

forza informer thanks!

[@BIGbrown4620]

I’m looking to install a lift pump and sump on my first gen. You’re videos are very helpful. I’m curious on what fittings you used on the ve pump. Do you happen to have any part number for them fittings?

[@randytrevor3935]

Don't be so hard on your self man , your doing a great job !

[@bigtrev6754]

15 psi i ran on mine and it blew the afc o ring in the bore had to completely take apart pump top i would run 10 to 12 as with the air dogg she isnt gonna budge it will hold steady with mechanical i could drag it from 15 to 6 psi with her floored good luck

[@justinevomail]

Why don't you use carriage bolts to hold the intercooler in rather than all the spacers on the overflow tank? Look a lot cleaner.

[@raquskane4002]

im not a fan of chrome or dodge for that matter but i love the look of the front of the truck wish the back matched

[@MrVolfgar]

you're doin' a good job, so don't worry about it.

[@jacobroswell8731]

Loving the fit of my wrenchworkz hat great quality

[@sevenduecec1036]

Can't wait to see some work being done to the 05, triple turbsky.

[@FORD4LIFE73]

Greg congrats on the youtube callout #2 cant wait to see the 1st gen does

[@thomashixson8572]

Nice roll pan looks great

[@Thesongstaysthesame]

Wrench works insert for the tailgate?!

[@hotwaterhd6260]

Loving the first gen vids!

[@tannermorton4406]

70k already growing fast man love the vids

[@ShawnJS]

Street speed invited you to call out#2 Just check out guitarmageddonzl1 for the video

[@hermangarcia1267]

Keep up the good videos your videos make me want to work on my first gen, were could I order that roll ban looks good

[@Dhane-0]

Roll pan looks sweeeeeet!

[@johndameron682]

I have a question we have a shop and a lot of the time the floor is dirty and a creeper gets hung up a lot but I saw that you were using a creeper on your stone driveway my question is dose that creeper work good on that stone if so where can I get one ?

[@chukkaskate]

beautiful!

[@skating4ad]

70k!

[@macontrack499]

Just changed the oil and fuel filters on the truck. Might be headed up to E-Town tomorrow. Going to have the new style stickers there???

[@georgehinrichs4881]

Greg a was invited to the next KZbin call out!!!

[@johnJones_]

Beautiful

[@Thatduramaxguy]

Are you gonna put the forces on the first gen

[@youtubegarden4735]

That sending unit looks the same as my 95 Dodge B1500 van!

[@loganvpacountryboy4866]

Will you paint the pap scrap truck eventually?

[@vasiliydron]

Logan PAKuntry he said no like ten times already lol

[@jonahduncan2391]

Do you plan on painting that first gen .would love to see it get done

[@Bigtim-tg6tq]

Love the videos man n ur trucks r awesome keep up with the good work

[@austindecker1419]

You forgot the forces

[@yungsavage8961]

I I paused the video and I even screenshotted it for proof and I'm going to take a guess on what your doing and my guess is you're putting the rear roll pan on.

[@anthonygomez7984]

Please paint the first gen. It's coming together so good!

[@Ketchup-ke5yl]

Anthony Gomez no it looks so gud rn

[@bengatie8616]

Anthony Gomez he needs to paint it

[@TheBoerneSkater]

I wish you could run the 05 at the event :/

[@lukeearnhardt9360]

Love the channel keep up the great work

[@TheKiefferman1224]

Do you have a part number for the gas sending unit you used? Where did you get it from? (LMC)?

[@clayfist4033]

Where is your fan in your electric fan for the radiator to keep it cool

[@davesisco4637]

OMG 😲 . Forget the cosmetic stuff and get that baby running !!!!!

[@GRVDGRLIFE4]

Your 1st gen dodge sound sweet

[@brockmatlock390]

Greg a im coming from Oklahoma hope to meet you!

[@chuckdilley6209]

The air tool sound clip to cover cuss word. Hahahahaha

[@CreamyArrowGarage]

You Welcome:) but without the chanel being so awsome there wouldn't be 70k. So keep it up :D I'm just starting my diesel adventure with my W124:) Turbo is there I just need the fuel:) Best regards and have a Awsome event Tomorrow:)

[@bloodypandas6652]

I love your work. I love watching you. You make my days. I'm going to miss you when I'm at basic training. I'm going to have a lot of watching to do.

[@davidben76]

Hey Greg love the vids. I have a 03 cummins 6-speed, and i have been looking high and low for a shift knob for it. I want a 70's era pistol grip for my truck, any ideas or help would be much appreciated. Thank you

[@transamfan81]

davidben76 did you look on the Hurst site? last time I checked they still sold them.

[@davidkeyser2419]

20psi will blow the front seal out been running my pump at 15psi for months with no problems.

[@lilmiket28]

we love u too bro!!!

[@brandondresbach4023]

Hey Greg, how much boost does No Boost make? I've watched every video since you started. Please comment back. Love your channel

[@rylanburson9912]

Love your videos

[@haydynjohnson2988]

Hey Greg what size are your tires on the first gen??

[@jeremyjenkins2088]

keep up the videos love the content

[@josephumsted1723]

When he painted it he could have made it look like it was aged. My cousin always does that when we get a old car.

[@jordanbarakat7288]

Mine makes 15 psi with stock lift pump

[@Slednex700]

You should race the tow pig against DFRs and Steeetspeed717s duramaxes

[@TheBCSledder]

Slednex700 Greg would slap the shit out of both of them

[@heavychevy162]

Man no night time driving footage with the new led's? Roll pan looks sick though

[@r0llinsmoke655]

Greg you need some led strip lights in the garage.

[@johnthompson5204]

Those 3rd gens scream!!!

[@bryanmunoz3460]

Are u going to Octoberfest// street speed 717

[@johnJones_]

that's all that matters

[@hdgaming-iv5ju]

I'm going

[@alpinesky8640]

Is the rear still welded?

[@willbram8284]

Where did u buy that back bumper?

[@timstrobel089]

I don't know about everybody else but for some reason some day I feel the 1st gen gets blacked out. even though he says no paint

[@jackramon9334]

Roll cage and racing seats would be mint

[@coltenthies9483]

Do you put a air filter on it

[@jeffkleemeyer4620]

👍👍

[@richardhaines888]

Take both scrap trucks to the callout

[@expro2039]

Greg I think u need an air filter on the 1g 😬😬😂

[@fishnasty2.028]

Greg, transplant the forces onto the first gen?

[@fishnasty2.028]

Nevermind, haha.

[@madrad3]

Murder out the first gen like the other trucks

[@hudsoncollins3487]

Put the tow rigs wheels on the first gen for this event

[@BandPGarage]

Took off Friday for the Greg A video 🤷🏾‍♂️

[@racecraftperformance2855]

Volume UP!!!

[@TheodoreRoosevelt3]

greg a is over here like "yeah i lift... fuel tanks"

[@matthewbeer4061]

Notification squad!!!

[@paulhansen9626]

Smash that like button like the hulk!!

[@mitchelsalas2499]

Air dogs always very fast man ive never had a problem with them its like they point a gun to there employees heads and is like get that shit out there lmao cause there just so fast but there awesome

[@kotysisson3889]

Roll pan

[@incompletehunter]

Literally called the sump being loose. Shit happens.

[@Frangulate]

incompletehunter did you comment saying that? I think I remember seeing it lmao

[@youtubegarden4735]

Maybe you should take it to Andy so all you have to do is pick it up before the event that way you can just make videos of you talking while you drive around.

[@TheBCSledder]

KZbin Garden Nice reference to fuckboy

[@kevinz763]

Try rockauto.com

[@Novalbz]

Air dog needs to sponsor you holy shit and stop apologizing for everything

[@hammerbiohazard521]

Come on Greg we understand crunch time and even though we love the face time just put the cam on and sent it....... u can always do an intro n wrap up n just work away ....

[@Jdoustou15]

Please treat that frame with something