The Night Ended HORRIBLY For My 2024 Mustang GT...

[@squig_ls]

That snap at the end of last vid was gut-wrenching. Interested to see what happened. Hopefully nothing too bad!

[@DerekBaranProductions]

Crazy right hahaha

[@Pr0digy47]

I love when he actually does some kinda racing. These are his best videos. But I know the track isn’t for everyone. It can be super annoying sitting around waiting for hours to just get 2 runs. That’s why everyone goes to the street. But congratulations on the new set up.

[@VOLCE187]

Biggest Mistakes people make is never upgrading the driveline when making big power. Big Motor. Top loader. Bendover. Its all over. Lol

[@DerekBaranProductions]

Bahahaha

[@Clutch_Kick187]

First its axles, then d-shaft, and hopefully it don't take out the tail shaft of the trans, then diff, then trans starts slipping after about 20-30passes.. These cars are perfect at 10.5 to 10.8... Any more, and you need to spend another $10k..

[@The_Mustang_Den]

I have a 2023 Mach 1 6M in Fighter Jet Grey and just picked up my 2024 Dark Horse; 6M in Grabber Blue. So excited to get my Whipple installed … hoping to not break too many axles. Went through a few with my 03 Cobra with Whipple and Later Hellion Turbo. This video giving me flashbacks 😂. Thanks for the great content.

[@L42776]

That’s a crazy combo

[@DerekBaranProductions]

So sick dude!!!

[@TJP5.0]

Thanks for keeping us updated about the order payments, the clarity went above and beyond expectation. Many people in the same position would have kept quiet and delayed shipping the orders with no info.

[@teddydavid2816]

Axle snappa merch coming soon

[@DerekBaranProductions]

🤣🤣🤣

[@teddydavid2816]

😁​@@DerekBaranProductions

[@emitchell5169]

Please I would buy it

[@wolfreyracing6258]

Im the guy who was driving the blue s10 you raced at 0:38

[@DerekBaranProductions]

Awesome ride man!

[@wolfreyracing6258]

@DerekBaranProductions thank you! Might see yall out there next time

[@michaeldials9291]

I have the stock axles from my 2021 Mach 1. I have the Ford Performance axles installed. I don’t use the stock axles at all and they are pretty new. Just have a couple thousand miles at most on them. I don’t have any ship boxes. I can sell them.

[@AdamSchoenstein]

love the content as always !

[@micro1603]

Great work guys,no pain no gain onto the 9s!❤

[@calebbutcher5396]

Is your 10R80 a little rough when cold? Because mine is its a 24 GT as well, also do you let the 10R80 get to any certain temp before using paddles?

[@DerekBaranProductions]

ASS when cold and yes 100%

[@colinmeeks1054]

I have to give credit where it is due. I wasn’t crazy about Apex at first, but it has grown on me. Congrats on the 10.0 pass!

[@DerekBaranProductions]

Thanks G!

[@antoniofaulkner6892]

You are doing the form a solid. By it breaking. Someone has to show the weak points unfortunately it cost the person time who first experiences it and saves everyone else the guessing.

[@Tubelly]

You seriously can't be mad about it breaking, like you said that's part of having a drag car which is arguably the hardest thing you can put your car through

[@backwoods5oh]

Glad to get the car up and running again. Just remember no more digs until you get some thick boy axles! 😅

[@DerekBaranProductions]

Yesssir thanks!

[@Iroc4U]

Derek nice surprise 10.05 for the first run. Enjoyed watching that run. You will I know for sure bounce back.

[@billlear5607]

Watching you drive that go cart. Had me thinking, did he get mushrooms on the That pizza. Lol

[@DerekBaranProductions]

🤣🤣🤣🤣🤣🤣🤣🤣🤣

[@SuperDutyCustoms]

Just for your safety anything faster than 11.50 you need a SFI fire jacket, can’t believe tech let you run without one.

[@DerekBaranProductions]

Yeah ima get one

[@christenn32]

My man was going for 9s on stock axles. You should know those axles only had 1 10 flat run in them.😂 Side note: brotha, you need to do more drag racing. You have a knack for it. You really got after it with the Mach 1 a few months ago, and now this 10 flat.

[@DerekBaranProductions]

Imagine 🤣🤣🤣

[@kevinbrown259]

I am glad you have another ride.

[@supersportlt1]

Crazy seeing the Camaro ZL1 drive to the track run 9’s then drive home 😂😂😂

[@DerekBaranProductions]

45k car vs 75k car lol

[@DerekBaranProductions]

Thank you guys *SO MUCH* for Buying an Apex Shirt! *LESS THAN 100 LEFT!!* www.dbpsquad.shop *My 2024 Mustang GT Almost Went 9s!!* kzbin.info/www/bejne/lZSbha2Nrb5kr7M Be sure to tap in *FRIDAY 8PM EST* for Another Video and Get your Vortex Air Compressor here!! shorturl.at/xYHTF

[@johndecoster9509]

Man, them go carts are fast bro!!!

[@DerekBaranProductions]

SCREAM!

[@johntomasek5868]

You gotta get f250 platty with a trailer!! Perfect set up!

[@Coyote9smilespergallon]

Damn that's why I haven't been to a prep surface, but my boy! You pegged the 8k rpm for a minute lol, my car has accidentally hit that 8k a couple times

[@jamesburton1741]

Good to know there is a safety to limit the rpms at 8k when something fails.

[@Coyote9smilespergallon]

Got my Whipple shirt!! I only missed one in the collection so far

[@brett11H]

Onto better days for Apex... She screams though!

[@DerekBaranProductions]

YES

[@DarkHorseMalik]

Just purchased my Dark Horse last week & waiting for it to be delivered later this week what SC do you recommend Whipple or Roush?

[@DerekBaranProductions]

Get the Stage 2 Lethal Whipple and use my code “DBPSQUAD” to save around $1,000! Youll love it

[@Awkwamanwitdastang]

Dawg, you need a stop the hop kit with some billet vertical links on your mustang for the drag strip to help take the axle problem away

[@marcasswellbmd6922]

The first Real Mods I am planning on is the half shafts and a 1 piece drive shaft soon.. I have the Manual and I'm starting to get sick of listening to the stock drive shaft clunking.. Anyway thank God your boy had a half shaft for you..

[@Spyke_5.0]

You can make it bigger, stronger, and faster lololol. Keep it up!! I need to order me another sweatshirt 😎

[@DerekBaranProductions]

Oh yes!

[@2003cobramustang]

I got the notification. Bummer when i was watching Monday when it broke i thought it was the driveshaft.

[@DerekBaranProductions]

Thank god that held up!!!

[@hectorvillanuevacrespo1744]

There goes the warranty 😂

[@thescramble4309]

Derek you gotta swap a CVT in there ! Indestructible As the Camaro runs 9’s and drives home . Glad you left that in there

[@cyclonekevin6199]

Good looking out Brandon, it’s time for a truck and trailer.

[@vip3r421]

Anyone what type of hood the red mustang has at 0:38

[@christopherpickens1478]

You're making big power now, power breaks chit time to upgrade the rear end now sir

[@DerekBaranProductions]

Faccccts

[@kingtee94]

One of the best things you can do when it comes to drag racing is to get a truck and trailer setup!

[@stephenomallie1659]

Bro..sorry that happened. You and Jake pulling a "Brandon" then gocarts...epic

[@KJ_S]

RIP 1STOCK😢😢😢😢we lost a legend

[@DerekBaranProductions]

So sad fr :/

[@sachamaurice275]

what happened to getting that trailer? I just wanted to know. I hope it's all good.

[@DerekBaranProductions]

Its just in limbo rn because i have to figure out a rig to tow with

[@s650_Juan]

Question so when you get headers do catless waste more fuel that catted headers or are they the same?

[@TheLoneWolf_andCoyote]

Triple AAA plus membership $125.00 annually 4 tows a year 1 up to 200 miles 3 up to 100 miles. i've had it over 25 years never leave home without Triple AAA.

[@nicholashall8498]

Great content

[@DerekBaranProductions]

Thanks buddy!

[@kingdogerino9212]

Love seeing the content unfortunate what happened though

[@DerekBaranProductions]

We will hit the track better than ever next time!

[@kingdogerino9212]

@ I’ll put my prediction of 9.7 next time with the new tune!

[@Json.-]

I had a feeling it would happen when I saw you squat and move out like that, yea, at first I thought the trans broke, but an axle is better, race car stuff

[@VentiTimes]

Apart from the axles, APEX did really well

[@kennethsaunders7108]

yeah but 10.05!!! And ya kinda knew right? Now ya can replace em with good ones and get that 9!!!!

[@DerekBaranProductions]

FACTS!

[@marcasswellbmd6922]

Thats what Whipples do on sticky tracks.. Good thing you have a lift at home and the energy to do the work.. He was going to have to do half shafts anyway but I know this isn't how he wanted this to go..

[@53bread]

U gotta get big blue and the trailer ready

[@davidgoesbowling8959]

That kart track looked like tons of fun! Where is that at?

[@SLIXK_M4]

Fire Derek !

[@thegangsterofpool]

When I watched Stang mode put the Whipple in his dark horse the shop upgraded his axles and drive shaft. Even before the dyno it looked like such a necessity for that power increase. I’m under the impression that the quality of the parts from GT to DH is noticeably different, as well they should be. Even the door/trunk hinges are different. I think in order to be not only safe but have that car confidence u gotta replace every performance part w a racing option. Be safe out there brother.

[@Gdp1678]

@@thegangsterofpool I have a s550 GT, aluminator short block, Whipple on E85, headers, drag radials, etc etc. makes 850whp. Stock axles, stock DS, no breaks or issues. I don’t race it on a sticky track either, cause the same thing would happen to me as it did Derek. Street use, roll racing they will be fine. If doing any dig racing have to modulate it and not give it everything on the launch. Eventually I’ll get them….. already have a good chunk of the suspension done. Most boosted mustangs you see don’t have axles and everything done, unless they’re meant to be more than an occasional track car.

[@ATHFTHEONE]

This hurt to watch. Feel your pain. My GTI is in the shop after an accident.

[@DerekBaranProductions]

Oh man! Hope youre alright man!

[@ATHFTHEONE]

@DerekBaranProductions No injuries. Branch on the road, dodged most of it, but ran over some. I over corrected and ate the curb into a right turn, plowed over a shrub, amd went back onto the road. Luckily I was only about 2 miles away from home.

[@scjdiving7067]

Why foot breaking? Doesn’t car have line lock for burn out and launch control?

[@joeykemeny6085]

apex needs some suspension for sure would help a lot. Also I miss the zr1 :(

[@DerekBaranProductions]

Faccccts and ZR1 hits the race track friday!

[@chrisdosa]

Yo bro do you still have you cold air intake setup?

[@RockX_Chris]

At the end of the vid you guys sound just like Brandon, talking about eating again 😂

[@andrewmullikin1011]

I put a whipple on my 2019 and it went to complete crap those cars aren’t meant to be whippled unless you change literally everything in it sadly😭

[@Lord.Crawford]

That's me upgrading my axles

[@davable2505]

Most new axles come with a new axle nut. BTW

[@Marie.S550]

Finally got my first shirt 🔥

[@DerekBaranProductions]

MY GUY!

[@L42776]

To be fair I’ve seen videos of ppl breaking those na I’m suprised it lasted those first few digs

[@DerekBaranProductions]

Righhhht haha

[@SVT_Beck]

Time for a truck and trailer!!! 😂

[@juangutierrez5705]

Interested in the drag pack

[@DerekBaranProductions]

Tires, where you located?

[@juangutierrez5705]

@ Durham N.C

[@juangutierrez5705]

@@DerekBaranProductions I also dmd you on insta.. but anyways I’m in Durham n.c

[@vudabr]

Hello, has any contact of feral industries ? made a order from front lip for s650 about3 months, and nothing to ship, no email response nothing...!

[@XFSAngelOfDeath]

Poor apex. Will come back stronger 💪 🏎💨💨💨💨

[@timgenz2849]

DB, let’s see here Jersey Mikes and Hunt Bros if my math adds up equals 👉 Barrel 😂

[@DerekBaranProductions]

Bhahaha

[@davidgoesbowling8959]

Sounds like an expensive repair. Adding a whipple without reinforcing rear end is never a good idea. That's a lot of torque!

[@landonsparks5632]

I didn’t see that coming

[@DerekBaranProductions]

🔥🔥🔥

[@lancescott7620]

Why did you stop and get air in your tires when you just advertised that inflator?! Lol

[@DerekBaranProductions]

I didnt have it on me 🤣

[@lancescott7620]

@ lol

[@HEAVY_IS_THE_METAL]

Driveshaft!! Tires very sticky & torque is doing work!!

[@DerekBaranProductions]

Yesss

[@HEAVY_IS_THE_METAL]

@@DerekBaranProductions Upgrade the driveshaft if it's broken. I did that with my supercharged-8, every time i broke something, i just upgraded it 😆👍

[@bagaming9]

Hopefully it's nothing too bad.-Brandon

[@DerekBaranProductions]

🙏🏼🙏🏼🙏🏼

[@seanmccarthy6992]

I think you snapped a axel or something the way you didn’t leave the second run the car just didn’t like it or maybe you snapped a drive shaft maybe

[@DerekBaranProductions]

👀👀

[@1The7DOdouble3BS]

Damn bro are you going to endorse every air compressor out there?!?!? I’ve seen quite a few air compressors come through your garage

[@DerekBaranProductions]

Yes bruh thats money 🤣🤣🤣

[@1The7DOdouble3BS]

You’ll have no trunk space left to carry them all 😂

[@1The7DOdouble3BS]

I got trunk space if there’s to many floating around your garage homie 🤙🏼🤙🏼🤙🏼

[@ricshuttleworth1609]

Yeah, that snap clunk at the line made me look away from the screen.

[@fsub9834]

Derek man, having a pretty much guaranteed 9 second car PLEASE put a roll bar in and some safety equipment. 9 seconds is a fast freakin car where stuff can go wrong fast. Just want to see some more safety in the world of fast cars man.

[@pattypat-me1sq]

Supporting mods..

[@ReyzGamingChannel]

Yo here we go!

[@DerekBaranProductions]

🙏🏼🙏🏼🙏🏼

[@alexmorales5550]

It happens in drag racing every drag cars has mechanical failures or they crash in The dragstrip

[@DerekBaranProductions]

Yesssssir this is true!

[@dillmss]

how much for the wheels

[@ReyzGamingChannel]

Hey derek just letting you know you might want to take the video down and reupload it an hour later or so the video did not push to sub boxes.

[@DerekBaranProductions]

Hmm really???

[@ReyzGamingChannel]

@@DerekBaranProductions yea video didn't not push to my sub box nor did i even get a notification youtube has had problems all day for youtubers not pushing their content out.

[@Fingamyaz]

​@@DerekBaranProductions i got the notification.

[@swizzy6010]

I got notified too

[@michaelhoneycutt1837]

I got the notification

[@GusArizona22]

is a 2018 GT 50k miles a solid car to pickup in 2024?

[@YoungBoiThrOweD93]

Did you already announce who won the raffle of the kdm car

[@Mrbugsgg]

Time for a single cab build 🙏

[@DerekBaranProductions]

Dudeee one day!!!!

[@Sn5.0ced]

Truck and trailer asap

[@DrSuS80]

Might be a stupid question but what happened to your grandpa’s Blue truck you had? Thought you were gonna use that to tow your cars around.

[@DerekBaranProductions]

Actually picking it up tomorrow!!!

[@DrSuS80]

@ right on what happen to it?

[@albertogarcia6348]

What happened with the 2014 mustang who won it nobody has said anything about it or was it a scam

[@tahoe6182]

Did the trans go out i just started watching the video

[@zacharygiffin6246]

Next time, you're gonna race the car tow it to the track cause you never know what will happen and if you break at least, you have a way home, if you tow it to the track instead of driving it

[@VermillionRacing]

At least it wasnt the driveshaft, a exploding driveshaft can and will absolutely total your car

[@superfuture2290]

Congratulations on the other hand🎉😂

[@Clutch_Kick187]

Not only 8k twice in the burnout.. drills 8k and holds it there with no load on the motor.. I don't see a single way possible that your chains or phasers aren't damaged.. Good damn thing the OPG & CS didn't let go.. Man you gotta be a bit more diligent with the rpm bro.. Trust me, I have destroyed 1 gen2 and 1gen3 yotes.. They aren't indestructible like everyone seems to think..

[@DerekBaranProductions]

Dawg, i had no control over the rev limited when it snapped. My foot was off the gas the car tweaked out. I didnt just “hold” it there for fun haha

[@danielpizano8049]

Any update on the winner of the Shelby gt500 ?

[@yourfellowgamer7060]

Snap crackle pop

[@DerekBaranProductions]

Yessir haha

[@ethankaters1969]

so did you just call a random tow company to come get it? or did the track have a person for that maybe?

[@lancescott7620]

What happened to your other buddy you just brought in to work with you full time? Haven’t seen him in a minute.

[@DerekBaranProductions]

Jordans around! Unfortunately the fulltime thing didnt get to work out like we hoped 😭

[@Matt_S550]

Gotta get me a t shirt 👀

[@DerekBaranProductions]

Thank you buddy!