The ONLY TAPE METHOD tutorial you need!!!

Рет қаралды 17,798

Күн бұрын

Join me on my Perler Pokémon journey! I plan on making all the Pokémon including from Pokémon Scarlet and Violet!!
Best tape method tutorial you need! In this video I’ll show you how to do the tape method without going too much into detail. Check out my other tutorials for more in-depth information! Doing the tape method will help make consistently better Pokémon perlers. Yes, it takes longer but it’s worth it for a better end result. Considering how long they take, DONT CUT CORNERS! Follow my account for more Pokémon perler bead content.
#pokemon #pokemonperler #perlerbeads #perlerbead #perler #perlers #timelapse #perlerdex #hamabeads #hamabeads #artkalbeads #pokemonwall #beadwork #beadsprites #beadsprite
If you like perlers and want to know where to get them check out my Etsy:
www.etsy.com/s...
Also follow my socials! I have videos there not posted here.
www.facebook.c...
/ beadamonpixels
/ beadamonpix. .

Пікірлер: 53

@devynnpaige5481 11 ай бұрын

I wish I knew about the tape method when I used perler beads as a kid, because even though the peg boards I had didn’t become warped, the pegs did become melted, especially when I tried making little picture frames with them, although it’s not very surprising now that it was the pegs that didn’t get covered with the beads that got melted down, as a kid couldn’t figure out y (Although that was back when they were called Melti beads, & now they r called Perler, it’s amazing how companies tend to change names of products to make it come across as a fresh new idea, I mean take a look at Silly bands they r currently being called crazy bands, which unless u grew up using them, u r not gonna notice those little tidbit 😂) Sorry I don’t mean to ramble on with this comment, I’ll stop now 😂

@BooTomatoTomato Жыл бұрын

That's the best water bottle ❤ Also, this channel is getting my husband back into doing Perler projects. 😊

@beadamonpixels Жыл бұрын

yesssssss! Tell him welcome back for me :D

@amberlobmeyer3805 Жыл бұрын

Dude i love Darkrai he is one of my favorites

@coolkitty1229 Жыл бұрын

I appreciate you. Here from you fb reels

@beadamonpixels Жыл бұрын

Thank you for following here too!

@neoxflame8706 5 ай бұрын

Can you show us how to melt like you do and get the results like you do like in depth

@SteveO3030 Жыл бұрын

Looks like all those wrinkles in that used sheet of parchment paper transferred into the melted perler

@FuryousD 9 ай бұрын

U can get rid of that by ironing the paper b4 ironing the perler, the iron will iron those wrinkles out of the paper.

@keithbowman7650 Жыл бұрын

When you flip it over, could you leave it on the pegboard and then lift the pegboard off of the perler? That would provide stability for the bigger pieces.

@dwtunchained217 6 ай бұрын

Poking holes is a matter of preference. It is absolutely not necessary.

@beadamonpixels 6 ай бұрын

To make them the way I do it is.

@jameshearn3453 Жыл бұрын

What program do you use too get your measurements? Also do you have any tips on dealing with tape resido after you trying too pull the tape off the beads? Loving the content, keep it up ❤️

@beadamonpixels Жыл бұрын

All the pokemon i make are the in game sprites, so 1 pixel is 1 bead. If i had to guess you are using masking tape. Try using Painters tape. It has similar sticky power but doesnt leave any residue. Thankfully the beads are resistant so you can use something like goo gone to clean them off. Thank you for the comment!

@kush4826 Жыл бұрын

@@beadamonpixels what website would u use to find the sprites?

@beadamonpixels Жыл бұрын

@@kush4826 Spriters resource and pokemon database are great places.

@kush4826 Жыл бұрын

@@beadamonpixelsty

@Sparklpire Жыл бұрын

Why do you tape and remove them from the peg boards before ironing them? I recall when I did these back when I was a child they would be ironed right ok th e boards…?

@user-uy2hr1mo5y Жыл бұрын

what's the reason for the holes? I use this method all the time I just don't know the reason still haha

@beadamonpixels Жыл бұрын

I gotchu kzbin.info/www/bejne/mny3mYRorphlY6csi=kEjwt5B6CQmEb3Xs

@FuryousD 9 ай бұрын

Stops the beads from exploding, which is what I assume the video in that link explains, I can't click it from my phone.

@MackAttack2415 6 ай бұрын

this means it ends up mirrored, what if i didn’t want it like that?

@Katieanabelle 11 ай бұрын

Is it ok if you instantly iron it with parchment tape

@FuryousD 9 ай бұрын

That exists?, if it does im sure it would work, why not do a small scale test and find out if it does like I have been doing with different methods since I started doing perler art recently.

@GaryKertopermono Жыл бұрын

But why did you place the books on top of it? It already was pretty cool.

@FuryousD 9 ай бұрын

To stop the design from curling/bowing in the center, the books help weigh it down so it stays flat until it's completely cooled down.

@GaryKertopermono 9 ай бұрын

@@FuryousDIt was a joke, as the design is cool.

@FuryousD 9 ай бұрын

joke or not i answered the question that was put b4 me.@@GaryKertopermono

@andreania 8 ай бұрын

Does it need to be a special tape? or can I use a painting one

@ifrogyort Ай бұрын

why do you poke holes?

@Wantar 9 ай бұрын

Wait, so if you do it like this, you don't need to melt the other side?

@beadamonpixels 9 ай бұрын

Nope. I fully melt one side to get a very strong connection between the beads. I like this way because they can bend in half and not break

@Wantar 9 ай бұрын

@@beadamonpixels Oooooh, right, bending actually makes it stronger. Yeah, you're right. Thank you for the tip. :)

@donnietell0 10 ай бұрын

wait, so what happens to the tape when you iron it? it melts into it?

@FuryousD 9 ай бұрын

No, the tape doesn't melt to the perlers, u peel it off once the back side has melted together, then u can flip it over and do the front side if u want both sides ironed.

@donnietell0 8 ай бұрын

@@FuryousD thank you

@Chaos-creations Жыл бұрын

WHY DO YOU NEVER MELT BOTH SIDES with pearler your supposed to melt both sides

@beadamonpixels Жыл бұрын

Nah it’s art. I could not melt them at all and that would be ok.

@Chaos-creations Жыл бұрын

@@beadamonpixels fair enough you gave an actual response i just wanted do know why you don’t

@FuryousD 9 ай бұрын

@mylittlepantings8660 because it looks better that way imho, u can melt both sides flat, 1 side flat and slightly melt the other side to keep the bead look, both sides slightly to keep the bead look on both sides or like in the video just iron one side and leave the other side unmelted, this makes them more flexible so u can bend them without breaking them too easily. It's personal opinion on what the artist likes best really.