The perfect addition to any Jeep JL rear bumper! Rustys Rear Fascia Kit for the Jeep JL

  Рет қаралды 15,226

JL LIFE OFFROAD

JL LIFE OFFROAD

Күн бұрын

Пікірлер: 175
@mikehoffman3690
@mikehoffman3690 4 жыл бұрын
Love the true to life videos. Installs never go as easy as you plan.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Lol not all the time 😂 just glad it looks normal 😂😂😂🙌🙌
@jpslayer2016
@jpslayer2016 4 жыл бұрын
I used to do some automotive paint work and I was told by the expert that primer will hold moisture so it’s a good to paint over the primer with a layer of top layer paint. It might not be important but just a little tip. Love watching you’re videos even though I don’t own a Jeep haha.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
I definitely appreciate the advise... I decided on primer for a few reasons.. one... I used it to cover tht damaged section... Thts been covered for about 2 years now... and u occasionally see an old ride Thts just primed... and Thts the color they run... I figured I was being smart 😂😂😂 well... lucky use.. dry weather... I’ll cover it next time I pull the cover off... thank you for watching man! We need to get u a 4x4 so u can come wheel with us
@jpslayer2016
@jpslayer2016 4 жыл бұрын
@@JLLIFEOFFROAD I have a 1991 square body Chevy suburban with 3in lift and 33in tires. I know it wouldn't be a match up the jeeps but it would be fun to join maybe in the future. Thanks bro
@danielmelton5573
@danielmelton5573 4 жыл бұрын
Thanks to videos like yours in was able to avoid body damage to my JL tub. I ripped the stock bumpers off immediately. I'm running the Rusty's corners but I didn't install the middle. Installed a frame cover instead. It came out great. Keep the awsome videos coming.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
I’m glad to hear it! Which stubby rear u running??
@danielmelton5573
@danielmelton5573 4 жыл бұрын
@@JLLIFEOFFROAD I'm running the DV8 frame cover. I stripped the finish and had it powder coated satin black to match
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Nice... 🙌 should hold up much better!
4 жыл бұрын
Maybe I'm wrong but that corner cover looks like a great mud catch making it a nice place to form rust.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Possible... where I live.. moisture is uncommon... and it seems easy enough to pull of to wash up the once a year mudding trip I make..
@michaelhalstead64
@michaelhalstead64 4 жыл бұрын
I love the look of these. Much more finished. But in a wet, salty, winter environment, I'm too worried about moisture getting trapped behind there and rusting out my tub eventually.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Tht totally makes sense.. I mean... u could always use nutserts for all the holes and routinely take it off and check it... we are lucky to live in a dry climate... rust is never our first thought... for something to rot with rust here takes a long time of neglect.
@michaelhalstead64
@michaelhalstead64 4 жыл бұрын
JL LIFE OFFROAD Mo! You’re a genius. Haha. I literally never considered taking it off. Depending on the bumper I do, that might not be a horrible idea.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Michael Halstead hahahah oh yea.. removing the bumper 😂😂😂😂 never mind... touch work for me
@c130aviator
@c130aviator 4 жыл бұрын
Waving back at the kids at 25:00 my kids love my Jeep vids and work too.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
The lol they always tryna play it off cool ..... 😂😂😂
@jrs2930
@jrs2930 4 жыл бұрын
4.5" angle grinder with flap disc will take out the bench grinder and belt sander. I use flap disc for everything now. Good video!
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
That is actually smart, Unnecessary wasted space now. Appreciate you watching brother!
@ironbearjku2233
@ironbearjku2233 4 жыл бұрын
Must be nice having sunny warm days, VA weather sucks! Well have 1 beautiful day and about 5 rainy days until the next nice day lol I'm glad you made a video on the fascia I'm thinking about running it on the JK since I'm bumper less now and may frame chop in the future
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
To be fair... nice weather in NM... typically involves windy ass days. I hate the wind... ruins so much... not fun to be in... impossible to film in... I figure this is cheap insurance to keep the integrity of the pinch seam... and it looks good... could always strip and color watch it also...
@ironbearjku2233
@ironbearjku2233 4 жыл бұрын
@@JLLIFEOFFROAD lol I'll take those windy days just to see the sun, it's usually windy here too from the ocean
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Gio Lucero except out here... wheeling on windy days is like getting sand blasted 😂😂
@ironbearjku2233
@ironbearjku2233 4 жыл бұрын
@@JLLIFEOFFROAD hahaha true true
@brandonrichards9773
@brandonrichards9773 4 жыл бұрын
I had the same issue you had with Misty’s that the center section was a bit too tight. Over all I’m 100% happy with the product because after all what aftermarket install doesn’t require a little modification
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Crazy how hers was to tight and mine was way loose... I wish my jeep wasn’t so damaged... would give me a better idea if it was true.. that al tubs weren’t created equal lol
@gregy3660
@gregy3660 4 жыл бұрын
great video thought i was the only one who had issues with items not fitting correctly on my vehicles .
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
They don’t always go as smoothly as one would hope... but 🤷‍♂️ I’m glad to see everyone supporting it thou. I almost decided to not even do the install on this
@aaronjoyner602
@aaronjoyner602 4 жыл бұрын
thanks , any install video shows real world, thumbs up in my book
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Glad u could respect it.. appreciate ur support brother!!!! 🙌🙌
@jeffrypresutti3139
@jeffrypresutti3139 4 жыл бұрын
Not all tubs equal. LOL. Looks great.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Thanks brother, we are both happy with this... looks great.. serves a purpose... and can literally work with any rear bumper change 🙌🙌
@snowmeowoutdoors802
@snowmeowoutdoors802 4 жыл бұрын
Primer doesn't stop rust for very long. You need to put paint over top of the primer or it will rust through the primer.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Thanks for the tip... guess I’ll be adding some more touch up in the future. Didn’t think it was gonna be a problem... my previous body damage was primer (almost 2 years) And seeing other rides primed as the paint job.. but appreciate the feedback.. I’ll slap some black on it next time I pull it off
@603jeeper7
@603jeeper7 4 жыл бұрын
@@JLLIFEOFFROAD primer will actually suck in water and make it rust from the inside. Because primer in designed to suck in pant to make it bond.
@chefdanielb
@chefdanielb 4 жыл бұрын
Nice, should avoid potential pinch seem damage. I didn't even know this product was on the market. Will pick one up when I get new bumpers
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Glad I could show it to you! It’s definitely cheap insurance... can’t go wrong with it! 🙌🙌
@TheVtecdelsol
@TheVtecdelsol 4 жыл бұрын
Good job on the mod with modifications to make it work
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Lol I was to deep Into it to just stop 😂😂😂😂🙌
@JLURBilletSilverMetallic
@JLURBilletSilverMetallic 4 жыл бұрын
Great video Bro , it makes Bromance look refined and polished:) I love the tape in the deep socket idea ... It has saved me a little bit of sanity in the past...lol
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
It’s all about making tht illusion 🙌😂 Nothing more frustrating then tryna reach a nut or bolt somewhere ur hand dont fix... always so close, but never quite able to get it on... in... 😖 #ragemomemts
@MP-dg8ew
@MP-dg8ew 4 жыл бұрын
Great video.. just goes to show not every install is painless. I’m running Rustys tire Carrier on my JL. That product is a beast! Plus “I wanna be insta famous” so I can show off my favorite JL Life sticker 🤙🏻
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Rusty makes a good tire carrier... definitely not the beefiest one thou 😉😂 but it’s been holding up great on Mistys Jeep! Appreciate you watching friend! Good luck in the giveaway! 😬😂🙌
@jameshowey9958
@jameshowey9958 4 жыл бұрын
Was looking for something just like this, I was thinking I was going to have to get something made and here comes this video. Thanks mine is in order 🙇🏼
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Glad to hear I could show u! 😂🙌
@ScottsOutWest
@ScottsOutWest 4 жыл бұрын
Another great video! Good job!
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Thank you sir! I appreciate you watching!!!
@ScottsOutWest
@ScottsOutWest 4 жыл бұрын
You should have joined us in Maob this weekend. The weather is perfect and the trails aren’t very crowded.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
U out with all the peeps??
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
I got stuck having to train a newbie this weekend
@ScottsOutWest
@ScottsOutWest 4 жыл бұрын
JL LIFE OFFROAD yeah, I’m the guy whos dog shit in the Jeep. She’s not enjoying the off roading as much as she used to.
@timfirnkes4811
@timfirnkes4811 3 жыл бұрын
I have been looking at installing the Rusty's rear Fascia on my JL and have been watching videos on the installs, but I can't seem to find a review of how it holds up after the fact. Mo, can you share any information on how well it holds up after being drug off rocks or drops? Thank you in advance and keep up the great work!
@JLLIFEOFFROAD
@JLLIFEOFFROAD 3 жыл бұрын
Would make a great follow up video.. but the short answer.. it’s been holding up great...
@ironhide200
@ironhide200 4 жыл бұрын
You might want to think about painting over that primer. I’ve had issues before of rattle can primer soaking up water and causing rust.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Really??? Lol Thts no good 😂😂😂😂 did it come throu the primer?? Or was it under??
@yipeeiaye
@yipeeiaye 4 жыл бұрын
LOL "Watch me try to correct my F up" Fantastic line
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Lmao! We had success! 🙌😂😂 Thanks for tuning in again!
@joshuakazfields4374
@joshuakazfields4374 4 жыл бұрын
Cool but man Little Rock’s sand and water is gonna get trapped in there over time. I think putting a few drain holes right where the body line is would be a good idea.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Definitely something someone could easily add... I’m not to concerned about rust... we live in a dry climate... I’ll pull it off at some point just to keep an eye on it... but it takes serious neglect to let things get rust rotted down here.
@kevinellis5327
@kevinellis5327 4 жыл бұрын
I can’t remember what one but I had an issue with a nutsert or two as well !!! I think it is good when you have to improvise a bit ... that is good stuff !!!
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Improvise or die! Or something like that 🙌😂 thanks for tuning in brother!!
@glendavis1234
@glendavis1234 4 жыл бұрын
Nice! I have the JK version and like it a lot with my bumper delete.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Awesome! It looks clean! Definitely made the tub look worlds better!! Appreciate you watching!!
@Bluelightbandit
@Bluelightbandit 4 жыл бұрын
Cool addition! Since you don't have a die grinder, when you go to HF to get your new jack stands, you should pick up a 4 1/2" flap disc for your angle grinder. I've done a lot of metal work and a flap disc does wonders. I made a video not too long ago where I showed off some interior handrails that I made for my parents. I used a flap wheel to blend the welds in to the parent metal, turned out really nice. They usually carry 35 grit up to 120. I usually get 40, 60 and 120. 09:08 Reminds me of some old snatch that was permanently burned in to my brain a long time ago while on a call. It was one of those nights where everything was going to hell and then I got to see that crap to top it all off. Ahhh memories....😳☹😖🤯🙈 I sent ya an email there, Captain Morgan.
@Bluelightbandit
@Bluelightbandit 4 жыл бұрын
P.S. I thought that I would look at your channel swag that you have a link for in the description but the link doesn't work. It says the site can't be reached. Just thought I'd let ya know.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Well... I’m guessing jack stands are gonna be hard to find at Hf for a hot minute... people are gonna be flooding in to replace em... manager told me the same.. “good luck finding a new set any time soon” so I went to auto zone and paid an extra $20 for a set of duralast... I’m always under the jeep on my weekend... I needed a set.. I use flap wheels when I’m working on metal... I just didn’t really feel it was needed for this project lol... but guess I could have done some over kill 😂😂😂
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Lol u talking about tht damn dead cat? Lol I hate the qind
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
I’m tryna figure out the deal on the link... my internet is not acting very good at the moment
@timwatkins3828
@timwatkins3828 4 жыл бұрын
I may be a 12 year old mentally, but 18:43 allowing your part to wobble around, for when you shove it up there.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
To bad misty was inside working 👎😂
@Venom-kq5xz
@Venom-kq5xz 4 жыл бұрын
Band saw on my wish list😉 other than a grinder
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Ports band saws cut like butter... PLASMA CUTTERS cut even better!!! 😂😂😂 definitely more to go wrong with those thou...
@moohuhahaaa
@moohuhahaaa 4 жыл бұрын
This is likely the reason for the gap in the back (on the right side): 19:06
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Unlikely... the tub as already dented from tht dv8 bumper I had on previously...
@curtismacardy8213
@curtismacardy8213 4 жыл бұрын
Thanks for the video. Good to see how you over come issues, teachable moments. Also wondering the manufacturer of your rear control arm/shock skid plates. I'm looking for some for my JK.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
I thought about scraping the video due to all the issues I ran into... but thought... probably better it did... makes the install unique... and helps when others run into similar issues So my shock skids... they are rock hard 4x4... they seem to be holding up well... fitment is strange, but it fits.... Iv strongly been considering making new brackets to weld onto the axle out of 1/4 inch steel. This 1/8 stuff don’t cut it.
@curtismacardy8213
@curtismacardy8213 4 жыл бұрын
@@JLLIFEOFFROAD Or, you could just weld 1/8 on top of the exposed surfaces. Just a thought.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Curtis MacArdy one of the things running in my head... we will see where it goes... just my mounts are getting TRASHED every time I go out 😂
@ati573
@ati573 4 жыл бұрын
Simple and much nicer
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Couldn’t agree more, looks great, functional , and cheap insurance on tht corner.
@ati573
@ati573 4 жыл бұрын
@@JLLIFEOFFROAD truthful, this part should come factory on all Rubicon models and an option on the other models. . I haven't had this problem on mine. My road armor bumper seems to be doing the trick for me.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Lol road armor??? Brrruh... u need OFFROAD armor 😂😂🙌🙌🙌
@ati573
@ati573 4 жыл бұрын
@@JLLIFEOFFROAD there products have kept my jl from getting any body damage.
@ShockWaveOffroad
@ShockWaveOffroad 4 жыл бұрын
Nothing goes smoothly around here, LOL! Always hafta make some sort of adjustment or modifications. Love the look. Always hated how those corners were exposed. Great vid, bro!!👍🏻👊🏻🤘🏻
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Thanks bud! It definitely cleaned up the look 10 fold... cheap insurance for sure... 🙌🙌🙌
@c130aviator
@c130aviator 4 жыл бұрын
You are the realist, my friend. Lets quit our Jobs and open a shop.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Lmao, damn Id be taking a cut 😂😂😂
@c130aviator
@c130aviator 4 жыл бұрын
@@JLLIFEOFFROAD Pay cut? What do you do now? Baller!
@fretless05
@fretless05 4 жыл бұрын
Great video, issues and all; we all have them in whatever we do. Looks like good protection on the corners of the body, but is there really any need for the center section? It's not tied to the corners, so probably doesn't provide any support, and it looks like that part of the body is pretty well protected by the bumper.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Correct.. the middle piece I feel is more for aesthetics for the part compared to being useful. I agree I felt like uploading the video in all its messy glory would still be beneficial to someone down the road experiencing the same issue as I did.. least I can provide some feedback to them how I solved it... 🙌
@LarryRichelli
@LarryRichelli 3 жыл бұрын
@@JLLIFEOFFROAD They should sell just the corners without the center for less money!
@JLLIFEOFFROAD
@JLLIFEOFFROAD 3 жыл бұрын
Send em an email, they may make the exception 🤷‍♂️
@maxwelding4828
@maxwelding4828 4 жыл бұрын
Maybe you could have hammered out the dent on the driver’s side so that the nursert fit correctly?
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Not a lot of room to pound the back side with a hammer in that spot..
@maxwelding4828
@maxwelding4828 4 жыл бұрын
JL LIFE OFFROAD if you were able to get a socket back there, you could have used, maybe a metal rod, pipe, or maybe some wood, to get to the dent? Just an idea to get it to fit a little better.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
More so swinging the hammer up there would of been a head ache.. But I agree.. could of helped.. but this piece is not coming off... I’m good with it 😂 honestly I hadn’t thought about the nutsert in the dent... until I drilled it...
@chaostravel7169
@chaostravel7169 4 жыл бұрын
Primer absorbs moister.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Appreciate the feedback brother... I’ll hit it with some color when I pull it off in the future.
@TheVtecdelsol
@TheVtecdelsol 4 жыл бұрын
Bro making a video sure is hard work it’s like triple the mod time haha 😂
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Accurate.. but we love doing it 🙌🙌🙌
@thezmanz28
@thezmanz28 4 жыл бұрын
If Rusty's would have drilled their holes like 1/16th an inch lower, it would have made it easier to put the nuts and bolts in it. Terry Zman
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Agreed.... according to rustys... the rear seam... is not consistent which is what the problem in designing it...
@mynewhandle
@mynewhandle 3 жыл бұрын
Thanks. My concern would be if I actually come down on the Fascia, It will not give and cause body damage up higher? Have you hit them yet coming down of any rocks/ledges? if so how well did everything hold up?
@JLLIFEOFFROAD
@JLLIFEOFFROAD 3 жыл бұрын
I have, but Thts not to say it wouldn’t… my experience with it so far has been positive… but I would encourage you to get a full size bumper if you worry it won’t give you the protection u the expect.
@chuckisbusy
@chuckisbusy 4 жыл бұрын
You don’t have a die grinder I assume... would have taken a sec to make a quick deburr of the sheet metal whole.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
No sir, always a million tools I need... tht is one Thts been on the list
@chuckisbusy
@chuckisbusy 4 жыл бұрын
JL LIFE OFFROAD I’m in the process of getting a die grinder too, and a rivet nut tool. It was still a great video. Never saw this part before, didn’t know it existed.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Well I’m glad u enjoyed it... now tht my jacks were recalled this week... that’s high on my priority list lol
@chuckisbusy
@chuckisbusy 4 жыл бұрын
JL LIFE OFFROAD those gray Pittsburgh stands. That’s crazy, I lucked out and got the red 6 tons. Missed a bullet. Thanks again!
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Ahhaha yea.. those ones... mine were within the recall... I’m assuming HF gonna be our of jacks for a hot minute.... I’ll likely find something else.... I kinda need a set 😂
@isaacsaiz6934
@isaacsaiz6934 4 жыл бұрын
Great video, you almost make these installs look so easy. Lol
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
With the right attitude, most jobs are pretty simple. The more u work on ur jeep the easier all of it gets! PLUS if u ever break on a trail u have some ability fixing urself.. offroad recovery’s are $$$$$
@brandondubisky4740
@brandondubisky4740 4 жыл бұрын
How do the Milestar tires compare to the MTR/K? I had the Goodyear on my JK and leaning towards them again on my JLU.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
kzbin.info/www/bejne/fnLOgWuvg7Ghq7M Iv got about 6k on my mtr’s... still very happy with em. Louder then the pats but performs much better... Pats are mediocre best.... and they seem to gotten to big for their own britches.... they have increased on price like crazy.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Also wife’s jeep has about 10 on hers a d they have still been wearing great and climbing the hard things
@guyrinkevich1147
@guyrinkevich1147 3 жыл бұрын
So which bumper you eventually using for your rig? is it the rusty's or the cavfab? and do you recommend the cavfab ? will it protect from bottom hits?
@JLLIFEOFFROAD
@JLLIFEOFFROAD 3 жыл бұрын
Cavfab… the rusty piece is designed to work behind whatever bumper U want to use to prevent u necessary damage to the tub of the jeep
@guyrinkevich1147
@guyrinkevich1147 3 жыл бұрын
@@JLLIFEOFFROAD Cool, love your content btw :-), so the cavfab mid width doesn't flex into the body during hits? will check their site and order it.
@chrisparsons7036
@chrisparsons7036 4 жыл бұрын
What bumper is that on Misty’s Jeep?
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
It’s the cavfab micro rear stubby. Found the link for you. www.cavfab.com/CavFab-JL-JLU-Micro-Rear-Bumper_p_259.html
@chrisparsons7036
@chrisparsons7036 4 жыл бұрын
Cool, thanks! Any mods needed to work with the Rusty’s cover?
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
No sir, just bolts right over
@yogi5835
@yogi5835 4 жыл бұрын
Nice job, looks great! Good white board explain. Mo video was perfect. Oh yea, I know you didn't say it here but "I wanna be Insta-Famous" Love Ya, keep them coming
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Thanks brother! Glad u enjoyed and glad to hear I didn’t just start causing confusion! 😂😂😂 🙌 rock on!!!
@keithalbrecht6535
@keithalbrecht6535 4 жыл бұрын
Help I just bought metalcloak lift 3.5 and installed service traction control light is on
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Is ur steering wheel centered? Or grossly off?
@keithalbrecht6535
@keithalbrecht6535 4 жыл бұрын
JL LIFE OFFROAD grossly off
@keithalbrecht6535
@keithalbrecht6535 4 жыл бұрын
The service stability control lite is on
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Found ur problem 😉 So u lifted the jeep alot without adjusting the drag link...so what u need to do is extend the drag link to get ur steering wheel close to straight... tht will fix ur problem. Will take a few drives to clear the code thou
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
U know how to adjust ur drag link??
@capitansangre
@capitansangre 4 жыл бұрын
Hey, one of your JLs isn’t a rubicon right? You are running 37 on it, what did you do to beef up the axle if anything? Keep up the good work
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Yes, the billet silver one is a sport.. currently on 37s... We have regeared it to 4.56... recently added chromoly shafts... would like to truss it before we swap it... 😂🙌 thanks for always tuning in brother!
@capitansangre
@capitansangre 4 жыл бұрын
JL LIFE OFFROAD right on, thanks for the info, I’m running 33’s now and I thought the best I could do was 35’s. I’ll look into getting the gears and upgraded shafts so I can get to a 37 instead.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Lol I’ll be clear here... I don’t suggest 37s on sport axles unless ur willing to break parts. But it really boils down to the way YOU wheel. 🙌
@capitansangre
@capitansangre 4 жыл бұрын
JL LIFE OFFROAD cool, I’ll look for some rubicon acles
@capitansangre
@capitansangre 4 жыл бұрын
Axles
@timwatkins3828
@timwatkins3828 4 жыл бұрын
This is more like how my upgrades go. Glad you didn't "edit" it and make it look easy.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Glad u enjoy and respect the struggle 😂🙌 thank you for watching!!
@jasondevereaux3369
@jasondevereaux3369 4 жыл бұрын
Perfect instal??? Is there such a thing? Lol. Maybe if you drop of at a shop and pick up later and drive away. REAL install Mo. Good stuff 👍👍 took a while to get this done?? Went thru 2 sets of tires!??
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Lmao... so we had planned on releasing the rear truss video this week... but the new tires were in it 😂😂 I’ll film the cider this weekend thou
@jasondevereaux3369
@jasondevereaux3369 4 жыл бұрын
@@JLLIFEOFFROAD so you were in a huge hurry to get those new shoes on! Lol. Ya..I would b too
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
JL's Jk I mean... over these pats man...
@TheVtecdelsol
@TheVtecdelsol 4 жыл бұрын
Yes eyes protection haha 😂
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
U taught me better habits bro
@stevenchris3526
@stevenchris3526 3 жыл бұрын
Found it
@JLLIFEOFFROAD
@JLLIFEOFFROAD 3 жыл бұрын
My man!
@TheVtecdelsol
@TheVtecdelsol 4 жыл бұрын
You should invent nut sert for sideway angle 😝
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
I’d just star welding at that point 😂😂😂😂
@highwaykev4903
@highwaykev4903 4 жыл бұрын
You know the job gonna be fun and interesting when there is cussing involved lol. Hell bro you did good it ain't gotta be perfect if it fits it fits sometimes modifying can be fun. If you had a slide hammer you have put a bolt thru the hole and made a bracket to bolt to the back hook the slide hammer to the bolt and slap it a couple of times lol. Then try again and mount it then slap the jeep on the butt and say your welcome lmao
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Slide hammer is on the list of tools I want 🙌😂 glad to hear u enjoyed the video and my mess of an install! 😂🙌🙌
@highwaykev4903
@highwaykev4903 4 жыл бұрын
@@JLLIFEOFFROAD gotta have fun with it hell my JK got flat black and Silver in some areas. All done with rattle cans too idc the jeep gonna get love marks over time.
@Strizzle81
@Strizzle81 4 жыл бұрын
Doesn't look worth it...dont like how you have to drill and it creates a place for dirt and moisture to get trapped behind it against the body causing early rust.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
I hear what u are saying, but if it’s between that... and rock/ bumper caused body damage... I’ll take the lesser of them evils 😂 thank you for watching!!
@Strizzle81
@Strizzle81 4 жыл бұрын
@@JLLIFEOFFROAD Your Cavfab bumper and tire will protect the small side body area not covered by the bumper. Highly unlikely that you hit that area on a rock.
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
U know I thought the same thing.... Iv actually already hit it on a rock 😂
@Strizzle81
@Strizzle81 4 жыл бұрын
@@JLLIFEOFFROAD Interesting...you must not be messing around.🥳
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
I was shocked myself... as u hear me mention... I have zero concerns hitting tht corner (filmed a few weeks ago) if u watched the 5k video. U see there is legit rock scrapes on it now 😂😂 what the hell!
@TheVtecdelsol
@TheVtecdelsol 4 жыл бұрын
Ouch! Just cut that whole thing off haha
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Lol I don’t think that would be a good thing
@TheVtecdelsol
@TheVtecdelsol 4 жыл бұрын
Hahaha too happy with the tool didn’t record
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
U should see me with the plasma cutter
@boldrbangr9834
@boldrbangr9834 4 жыл бұрын
👍
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
🙌 thanks for watching brother!!
@TheVtecdelsol
@TheVtecdelsol 4 жыл бұрын
You sure spent many many many hrs on your JL
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
I wouldn’t have it any other way.... plus... if I didn’t... less content!
@phillyb4588
@phillyb4588 4 жыл бұрын
Fingers dude -reckless
@JLLIFEOFFROAD
@JLLIFEOFFROAD 4 жыл бұрын
Lol u should see me offroad 😉
Dirt Daily. Removing the Rear Bumper from a Jeep JL.
9:06
4xFredWilliams
Рет қаралды 18 М.
Beat Ronaldo, Win $1,000,000
22:45
MrBeast
Рет қаралды 143 МЛН
A Better Way to Waterproof Fabric
28:50
NightHawkInLight
Рет қаралды 1,8 МЛН
JL Skid Plate Comparison... Rusty's Offroad & Metalcloak - Part 1
15:54
AllPro Auto & Offroad
Рет қаралды 9 М.
15 Things You’ll REGRET Not Having on Your Jeep Wrangler
13:42
TrailRecon
Рет қаралды 200 М.
The BEST Front & Rear Bumpers for the Jeep Wrangler JL in 2023
12:04
DIRT ROAD CRED
Рет қаралды 25 М.
Moab Wheeling! Poison Spyder and Golden Spike
44:01
JL LIFE OFFROAD
Рет қаралды 2 М.
How to Choose Your Axle Gear Ratio
19:15
BleepinJeep
Рет қаралды 1,6 МЛН