The PERFECT SKX

Dan takes his Hobbyist SKX007 build and uses the Crown, Bracelet and NH36 from it to MOD an SKX171 into what he calls: THE PERFECT SKX. The Mod is supposed to improve on the SKX while retaining that SKX overall look and style.
This video is a longer, less cut down, build log of the whole process. Including the mishaps, problems and fixes.
-----------------------------------------
You can do this full build without having to buy a SKX171 with the parts linked below:
Links to parts:
NH36 (AliExpress) Select "black NH36 3.8 O'clock:
➤ www.aliexpress.com/item/10050...
SKX171 Dial (OEM):
➤ tokeilab.com/products/oem-dia...
SKX007 hands (OEM):
➤ tokeilab.com/collections/oem-...
Chapter Ring (Generic SKX007):
➤ www.ebay.co.uk/itm/234810691946 (Black Stripes)
Double Dome Sapphire Crystal:
➤ www.seikomods.com/shop/ct099/
SKX007 Coin Edge Bezel (Polished):
➤ www.seikomods.com/shop/ct202/
Affiliate links:
NH36 Movement (Green 3.8 O'Clock):
➤ www.namokimods.com/collection...
Has options for 3H or 4H and I believe the 4H is for 3.8 O'clock cases like the SKX007.
MM Style Ceramic Bezel insert (Black)
➤ www.namokimods.com/collection...
SKX007 Case:
➤ www.namokimods.com/en-gb/coll...
(There are a selection of casebacks from NamokiMods for the SKX007 case)
SKX007 Jubilee Bracelet:
➤ www.namokimods.com/en-gb/coll...
SKX007 Signed S Crown (coin edge):
➤ www.namokimods.com/collection...
SKX007 Coin Edge Bezel (Polished):
➤ www.namokimods.com/collection...
NamokiMods have all the parts to do a full build, support the Channel by using this link when you buy anything:
www.namokimods.com/?ref=itsan...
Use Code: ITSANOTHERWATCH5 to get 5% off orders over SGD40/£23/$30
( code excludes complete watches, Bergeon tools, and movements)
-------------------------------
------------------------------------------
MUSIC (In order of appearance)
Music by Joystock - www.joystock.org
➤ Lofi Chillout Hip Hop Beat - Joystock
Music from the KZbin Audio Library:
➤ Knowpe - Noir Et Blanc Vie
➤ Believer - Silent Partner
➤ So Long Analog - Noir Et Blanc Vie
THANK YOU FOR WATCHING!

[@ItsAnotherWatch]

There were some Markings on the underside of the OEM case back. Probably indicating who serviced the watch and when. But I couldn't make sense of them.

[@0_Ka-Bar_0]

Dude, please...I've been asking everywhere...Can I use IPA 99% instead if One Dip

[@ItsAnotherWatch]

@@0_Ka-Bar_0 I don't have any experience with One Dip myself so I don't really know. But whatever your wanting to use IPA on, I did find this topic discussing the use of IPA. www.watchuseek.com/threads/your-experience-rinsing-hairsprings-and-pallet-forks-with-isopropyl-alcohol.5427330/

[@0_Ka-Bar_0]

@@ItsAnotherWatch tnx mate

[@0_Ka-Bar_0]

@@ItsAnotherWatch I'm just entering in all this watch repair hobby and I bought old seagull movement for practise. I find that link useful because if IPA CONTACT that's made for delicate motherboards and such can't do much harm to pallet fork. And buying all these tools I just can't give 50 euros for 50 ml of One Dip this month...Imma just gonna wing it...tnx again

[@ItsAnotherWatch]

@@0_Ka-Bar_0 no problem, glad I could help in some way. I hope it goes well for you!

[@buttersneko5184]

Your channel is one reason I started watch modding. I have made a few of the same mistakes and learned how to fix or get around the problems by re-watching your videos. Thanks for all your efforts, it is much appreciated.

[@Perpetuum_1502]

I do have the same 171 watch and I'm looking to mod it. What an inspiration this video was! I've enjoyed it so much. The pure joy of doing it transcended beyond the screen! Excellent! I totally agree that really is THE PERFECT SKX! Kudos for this👏

[@migfed]

I will never get tired to state this is by far my favourite watch channel. The fact the video frequency is not so high makes it even worthier.

[@tarasmathers7423]

It's a "labor of love." Nothing feels quite as fulfilling, as something you've put your hands to, and pained over it's construction, and development. You're very meticulous, in nature. A quality needed for projects like these. It also requires a high level of patience, as you know. Something I'm lacking in greatly. I've been working with my hands for most of my life, and I've no where near the patience required to perform such a task. I admire your work, and the level of skill, and self control it takes to achieve it. Looking forward to the next one......

[@KayakCampingOffGrid]

Great build and fun watching the progress of this timepiece! The amazing photography of the finished build is really first rate, and a joy to see the intricate details and viewpoints/perspectives inside the landscape of the watch. The shots and video show how deep and complex the architecture is of the insides under the glass! I think lots of the time I see the case and bracelet as forming the overall LOOK of a watch, with the hands. These tend to dominate the feel of most watches... but the tiny details inside the glass show how the camera sees so much more detail and allows a new perspective on this landscape.

[@serdalkaptan]

This SKX really looks splendid! You did a marvelous job. Thank you for sharing.

[@cedricvanoverstraten3326]

Great video, so good to see how you're happy at the end. You learned the hard way, these matte dial are really fragile. That's why I bought a new SKX171 dial and put it inside a brand new skx007. Also, you're gaining dexterity and skills, keep the good work 👍

[@DialsandCrowns]

Love the finished product and your videos are incredibly helpful!! Keep it up!!

[@NW-lj6oo]

Really nice work as always, and your videos have been a great help to me on my watch building journey.

[@charliepugh9436]

I really enjoyed your video.. I've always wanted to mod a watch but I thought it would be over my head. After watching you, I think I could give a go. I love SKX. I have the 007, 009 and the orange 011. that I purchase about 10 years ago. Your mod is absolutely perfect. Best to you.....

[@chrispurzer9461]

I may have commented already, but rediscovering this today I felt obliged to state, again, enjoy your work!

[@stevelaferney3579]

Congratulations on a well designed watch. You took items not normally found together and made them work great. A one of a kind. Ugh!! Now I want/ need one. Two actually as I want to leave the rotating number ring off one of them and have the other complete with the total dive look. Aah! Love yours! Enjoy it lots. You deserve it. Thanks for all the fun and info.

[@chasekemp4982]

I was back and forth on the coin edge bezel but you have now convinced me to go with it. I will be using the original 007 dial and a deep sea style sloped black bezel but everything else will be the same.❤

[@davemck1887]

Good eye. To run with an idea that only your mind can see and to achieve your goal is so pleasing. I love the result, much prefer your version. Well done mate.👏

[@julianmoriati4682]

Nice job! I did almost the same build, but I used the lumed bezel insert you had on the 007. The 171 is the perfect SKX indeed once it have a coin edge bezel. Enjoy it!

[@MCHJ]

Great mod also the way the dial looks at 43:23 from the reflection of the trees! I'd love that.

[@shox75]

Great work! Your SKX is almost identical to mine now, except for the bezel (I have the deep sea bezel). Previously had the identical coin edge to yours. I actually love both looks.

[@petermulhall2564]

another brilliant video,congrats,love your channel,hope it continues to grow..

[@edmccracken7378]

love the passion and the videos / i now started modding myself / also the end shot with the tree reflection in the dial would make a kinda cool real dial

[@usgravyseal6274]

Nice job 👍 the starting skx was absolutely amazing for me 👌

[@globaljet8420]

Great video. Namoki can thank you for the order I just placed. Same bezel, crystal, and ceramic insert on the way!

[@ianmarshall3633]

Great mod brother, and a great video. Well done 👍

[@smflyboy]

This is genius! Well done!

[@seanblake7339]

I'm currently attempting exactly the same SKX171 NH36 Black Bezel build. Taking it slowly and making mistakes but having fun

[@davebowman1982]

Great video as always. Of course I'm now itching to build another watch but waiting on the shipping from China - takes forever!

[@hamradioshack9066]

Great video and great work

[@BobbyG3752]

That turned out great I was originally against breaking down the original but I like the discolored Lume or indices. I wish I had the talent to mod . Every diver should have coin edge bezel!!

[@Aukov2]

Oh man you are going to make me buy parts and build one skx for my self now..since buying a "new" one is ridiculous.. but yeah..good job. looks amazing. enjoy it m8!

[@CACOPHONIE]

Finally it got da look❣️

[@drews4685]

Nice job and video again 👍

[@erickcastillo6427]

Súper hermoso reloj, no se puede dejar de ver!🤜🤛🤘

[@martinlong8739]

Love the watch, your enthusiasm and you showing where things didn’t go quite right. A couple of observations was the Philips head screw possible used by someone who lost the original? Also when grinding down the lugs maybe remove the case back and mask up with tape as that lovely back was awfully close to the grinding wheel. Great video. Thanks 😊

[@askeladd9591]

Man and his troubled hobby shud be the name of this video :D

[@FSMJr]

Amazing work. ❤️ Looks like a Squale diver.

[@rbmwiv]

Here’s a tip for installing bezel tape. Remove the center and leave the ring attached to the square its in a remove one side with it flat on a table and you get perfect application every time. Or if the outside is missing leave the middle and use the same technique. Works great.

[@mstrwul1]

You've came a long way since the first time I saw you. 👍

[@lucciovd]

Empecé hace unos dias por el camino de los MOD's; este es de lejos el canal mas completo en el tema,felicitaciones.

[@pw10a2sal]

Well done !

[@lewdwig]

The perfect SKX is ANY SKX.

[@alfiebm]

My unmodified/unaltered skx007 with it's non hacking and non handwinding with the scratched up glass and and beatup bezel insert is definitely not perfect.

[@virketalpatel]

Does my ssk 5kx gmt count?

[@AJK967]

@@virketalpatelthat is what I am wearing ….

[@marcdwanyne233]

Got my first skx a week ago 😊✌🏻

[@Tom_H327]

This channel is awesome. 😎

[@koncomartalegawa]

Cheers from Indonesia! I still have my 5yo SKX007 w/ Jubilee still virgin. My hands is itchy to mod it using double domed, white chapter ring and slated green ceramic to make a Starbucks theme.

[@ronp4529]

That really is the perfect skx 👍👍

[@davidrankine4662]

Great video thanks

[@override39]

Good job my friend

[@EmilianoGuevara]

Nice to see you made the same mistakes I made :) great channel!

[@ElectricShadowsZone]

I had an unmodified and unmolested SKX007K which had circular scuffs on the dial. I think they were made in the factory in Malaysia.

[@mobile_matt]

Your right, Jubilee ❤️

[@robertwaffel8248]

It is a nice build. BUT I actually came to terms with the 171 and build an SKX with this awesome metal bezel, a top hat crystal and a dial from an srp turtle (no metal frames around the indices). I think the 171 bezel is actually the best part of that watch - not the dial (just my opinion). Keep up the great work on this channel!

[@stever7097]

I like them both before the changes.

[@dduran375]

Oh man, the long lost Franco brother

[@feojija2313]

Hi just curious, you liked the double domed more than the flat?

[@claudio6032]

Awesome Build! great Video! Were did you get the German DayDate Plates? 20:33 ...oh I see...you couldn't use them at the end... Great Watch Mod!!

[@chefbgordon8892]

I just ordered my first seiko and I’m already thinking of swapping the crystal to sapphire. I don’t even have the watch yet lol

[@moneysaversilver]

When you polish something do a figure eight, trust me I have lapped many aircraft, small parts. It's the proper technique. And doesn't leave any directional marks

[@joshuabriggs7114]

Nice!

[@wesleyfranken]

Is there any way I can buy this watch assembled by you? It looks awesome!

[@l9onid]

hello, what bracelet do you use?

[@jussipseppala]

Totally see your point. :)

[@martinsandstrom]

Fair play that you're into watches, and I do like watches a lot too. But man, I just gotta say that you could probably talk about anything and I'd enjoy listening to it. You're very articulated, no fillers, and your personality shines. There's got to be some background or cross-pollination with another part of your life more than a niche KZbin channel, or are you simply a natural talent?

[@ItsAnotherWatch]

Thanks very much! I'm really glad that you think so! To answer your question I don't really know. I suppose I could attribute it to having done voice acting in the past, and being able to talk somewhat eloquently in spite of any incompetence I may display, or the fact that I had a Gaming channel in the past where I did long commentaries, and got better at it over time. But honestly, I'd say its probably because there is a LOT of content out there that is simply scripted and red from a teleprompter and I didn't want to do that. I wanted my videos to feel more natural, although it does result in more rambling and repeating myself, I think it has a much more personable flow to it where the viewer feels like they're being talked to rather than read to. So rather than scripting my videos, at most I remember points about what I'm discussing and speak off the cuff instead. That being said, I've had thoughts of scripting my videos for better consistency and structure, prevention of repetition and therefor making everything shorter. But rather than reading it directly, I would record a reading of it, and then listen to it while recording the on-camera stuff, and echo it more naturally while simultaneously listening since I am able to do that to a degree. But I haven't tried it yet.

[@martinsandstrom]

@@ItsAnotherWatch I say keep doing what you're doing, whatever feels good to you. It's very good as it is, for this type of content at least.

[@thenotanclan]

It’s nice to see enthusiasm for the SKX is still alive and well - resto mods are a cool way to keep these watches alive and current - however, imho there’s only one ‘perfect’ SKX - an unmolested, all original J model complete with all its inherent flaws and charm

[@shallowtrapper9873]

I’m about to buy a new one, im really going overpay for it but oh well. I really want one and I’m not looking for mod or something used. But to your comment, what really is the difference between the j and the k?? I have seen videos saying there is really no difference except for the 21 jewels and made in japan letters on the dial

[@thenotanclan]

@@shallowtrapper9873 all true buddy - but the J model is the one enthusiasts favour - it’s more sought after

[@shallowtrapper9873]

@@thenotanclan oh I see, man you got me thinking now, but man the prices are high as it is on the k model. The J is almost 200 more on creation watches

[@thenotanclan]

@@shallowtrapper9873 I know pal - at the end of the day why are you buying a SKX? Mainly for heritage and provenance? If so the J model is the logical choice - if you’re buying to wear and enjoy the K model is ideal - either way you’ll still have a SKX - if you’re buying to modify then buy a pre owned example

[@detnit4503]

Hello, good job! ⌚ Do you (or someone else) have an idea where I can get a NH36 with a "german" day wheel? Best regards from Germany!

[@thesecondvariety2981]

Ive been thinking about this but seiko needs to come out with a prospex skx

[@stevedixon9409]

Do not worry,I also look at my watch not just to tell time,and yes it's a Seiko diver.😊

[@louiesmooth6761]

Great videos. Inspired me to do my first SKX mod a few weeks ago!... What other watch brands/models are good as mod bases? I've got the bug now but I feel a bit limited to SKXs.

[@ItsAnotherWatch]

Anything that uses an NH35/NH36 etc. The heimdallr homages, the pagani design watches, San martin and so on. There are also a bunch of parts on AliExpress for ETA movements. If you can find a movement and parts around it, chances are you can find cases that fit to do a full build. Not to mention there are a bunch of different case designs of other SEIKO's that are made to fit SKX parts so you can make an SKX without it looking like an skx at all.

[@understandingtruth10]

Mine looks just like yours Nice

[@FT4Freedom]

Cool man. I just want to buy it.

[@80sVHS]

You should put this vintage "tire" rubber strap on your steeldive Willard , will be even closer to the original

[@moboei]

Nice

[@IceDree]

Neat!

[@marshalbass7098]

Any reason you used the case from the 171? Is it different from the other case?

[@ItsAnotherWatch]

I only used it because its OEM. Functionally its the same as the other case. I just like the idea of using OEM parts when I can.

[@cavedweller8814]

Can i buy an heimdallr from aliexpress and modify to look exactly like this?

[@ItsAnotherWatch]

Yeah you can get it pretty close to this, A dial and hand swap will get the inside looking close (although you'd need to get black calendar plates for the movement too since the heimdallrs come with white calendar discs) and swapping the bezel insert would make it look very close to this. An SKX171 dial with some aftermarket SKX007 hands from somewhere like namoki mods or crystal times (for lume to closely match the dial) will work out great. And heck if you're ok with the stock font of the SKX bezel, the default one the heimdallr comes with would look just fine. I mention this because the heimdallr's (at least the one i got over a year ago) had a different bezel retention method which was difficult to put back on, which would make changing the bezel insert a real pain.

[@72duvla]

I wrote to you in comments on your another video and you were so kind and helped me a lot! I bought Namoki MM case and put my SKX171 dial together with a 4r36 movement and MM hands, and have to tell you, it is a beauty! If there is a way, would love to send you some photos :) I have a problem finding a perfect bezel insert :( That Namoki MM you use in this video looks stunning, but I still have a problem with protruding pip, if only someone would make it like Seiko does, mounted from behind...That is why I would still rather use a insert without a pip, just a triangle. Can you please tell me which lumed ceramic insert you took off in this video, DLW, Namoki...? I like it a lot, but it seems a little greenish in the daylight not clear white loke new one. Not many shops sell these now, LCBI ceramic inserts used to be amazing, but they sell only sapphire inserts now

[@ItsAnotherWatch]

Sure thing! This is the fully lumed SKX style insert I didn't use: www.aliexpress.com/item/1005002243300540.html I have 2 of them, they appear white all the time but have a great C3 green glow in the dark. I can highly recommend these. As you saw in the video, the print is nice and sharp too.

[@72duvla]

@@ItsAnotherWatch Thank you so much!! So, you say, it is not night and day worse than Namoki, as far as polished finish is concerned?

[@ItsAnotherWatch]

@@72duvla The polish and finish is on par with the best of all the other bezel inserts i've had.

[@72duvla]

@@ItsAnotherWatch Great! Thanks again!!!

[@RM-el3gw]

great job, very nice results. Only bad thing about this hobby is how stupidly expensive everything is.

[@ericcccccable]

The more I see the results of MOD, the more I tell myself that the big brands and their teams of designers are much more gifted than us at creating original watches, with a balanced and coherent style. I would therefore limit myself to repairing my watches myself, while remaining within my area of expertise, but I am not going to embark on more or less doubtful modifications...

[@ericcccccable]

Index finger a little too small for my taste for a diver. The dial resembles that of the Seiko 5 "dressKX".

[@richreynoldsCIT]

It’s great you left in the flaws…cheers And wear a hair net around fast torqy rotating tools

[@Sleeplesshandsome]

U are funny 😂 well nice job it looks cool

[@joewilliams6170]

Ha! I'm such an idiot!... here I've been a big fan of your videos but every time "I'll clean it with some IPA" I would think to myself, "Surely he's not rubbing beer all over his watch dial..." I guess IPA makes way ore sense as Isopropyl Alcohol. Keep up the great videos man!

[@kabralbrasil]

Can you guys help me to find the exactly parts used on this watch. I would love one identical.

[@ItsAnotherWatch]

I've updated the video description for you to include links to parts to do a scratch build of this watch, the only differences would be the OEM caseback and the namoki logo on the jubilee bracelet (but that could be replaced with a blank clasp). I would have linked the bracelet that I used, but it was an eBay listing which has since been removed. Extra things like Gaskets, the bezel click ring and such arent linked there, but they're available on the namokimods website also if you want to grab everything in one place. The only difference with the NamokiMods NH36 is that it comes with black calendar plates with a Red Sunday, compared to the one from AliExpress that i got that is all white print. I hope this helps.

[@kabralbrasil]

@@ItsAnotherWatch thanks a lot man! Appreciate! All the best!

[@ItsAnotherWatch]

@@kabralbrasil I've updated the description again to include the chapter ring, as NamokiMods doesn't seem to have the standard SKX007 style one in their store.

[@pedromsricarte]

Do you sell these mods?? Your work is fantastic!

[@ItsAnotherWatch]

Thanks very much! I don't sell my mods yet, I just make them for my personal collection. I may do so in the future if I can improve my skills and ensure they are put together just right (especially when it comes to aligning the hands with the date change). But currently I have trouble getting the OEM dials that I want, and for higher demand styles I'd want to use OEM dials.

[@marshalbass7098]

​@ItsAnotherWatch if I bought all the parts would you be interested in putting it together? I just dont have the tools.

[@jerichowatches1]

I've got an Spx007k with a jubilee bracelet the only thing is the divers 200m is in yellow not orange the jeweller that sold me it said it was ex window display and there is 5 variations in colour depending on were and when it was made he did offer to change it for one with the orange DIVER'S 200m but I didn't take him up on it I have seen one with yellow writing being sold on crono24 please can you give me your thoughts on this anyone pls🙏

[@ItsAnotherWatch]

I think if the one you have isn't doing it for you, and you'd rather swap it for one of the others, if it's not too much trouble, I'd take them up on the offer to switch it. It would be unfortunate if you ended up with a watch you didn't like. So if you prefer the orange DIVER's 200, go for the swap.

[@jerichowatches1]

@@ItsAnotherWatch Thanks for your advice I'm just sticking with it.I do like it I've seen other's with the divers 200 writing in yellow.Its just I'm no expert and seeing others different made me dought if it was ligit.Im to scared to even take the bk off.🧐

[@dado380]

Any Seiko diehard is my kind of guy!!

[@user-yc1wi9de3t]

My dady bought one #nkuwan and he loves it. It had been there for over 10 years when he went out with it.

[@PLBW81]

Do you sell your mods ?

[@ItsAnotherWatch]

Not currently, I may do so in the future if I can improve my skills and ensure they are put together just right (especially when it comes to aligning the hands with the date change). But currently I have trouble getting the OEM dials that I want, and for higher demand styles I'd want to use OEM dials.

[@seanhughes9577]

Would look better with an oyster bracelet I think.

[@seikoskx]

What missing the J😢

[@wokitlikeyoutalkit5619]

Hey mate, what would you charge to assemble a custom skx for me? I can send all the parts to you then you just ship the watch to me. Cheers 😉

[@timcavoi]

I wish I could buy this watch lol…

[@radonsmith4386]

So he now has an Srpd 55 with a jubilee 😂

[@leeharris5135]

The crown guard wouldn’t dig in if you wore your watch further up your arm. Each to their own but I don’t get why people wear their watch so far down their wrist? Watches weren’t designed to be worn like that.

[@marcinkarczewski1793]

Perfect SKX ...is SKX 399!

[@stevanpavic]

They are last chance to own Seiko pro spec diver watch, there will be no more affordable watches like SKX.

[@tomhill4003]

This is a cool mod and all, but I can't get over how people who aren't "divers" are so bent on the diver bezel. Seikos are fine watches for sure, but it would be nice to see watches built for non-divers. The overwhelming majority of people who wear mechanical watches have no need to know how much oxygen they have left. This whole diver watch thing seems like a lot of matcho BS to me. Why not just build a classy mod and leave it at that?

[@andychrystal690]

I use mine like a kitchen timer

[@tomhill4003]

Perhaps Seiko should come out with a kitchen timer dive model. I would definitely use it!@@andychrystal690

[@xxbaldycoupxx]

Less waffle, more action ffs, I'm growing a beard here! 😴😴😴😴