The Plaidessey Takes On Cleetus's 1100Hp F150 Work Truck!

[@ninom1980]

You guys definitely should screw down that neck slicer 9000 to the dash!😂😂😂 hey all the people that got butt hurt by my misspelling here you.go I fixed it!😂😂😂😂

[@kane2103]

The Plaidessey Guillotine

[@dbeerewout]

@@kane2103 Plaidesy*

[@bengelman2600]

lol but it makes a cool lightning bolt sound when it launches!

[@eriklarson9137]

@@dbeerewout I LOVE that you correct someone, and YOU ARE WRONG! That's the greatest! *Read the freeking description. Kyle literally spelled it Plaidessey. My .02 would be to stop correcting people at all.

[@3ToeCo]

@@dbeerewout Plaidussy*

[@allenlem6500]

as a service tech for tesla, at first i was like kyle has gone coco nuts for cutting up a p2. now i cant even be mad at it, i love it!!!!

[@eriklarson9137]

Oof at your original thought. You need to get out more.

[@V35anito]

I think if all the air gaps are taken care of it might help on the time. that might be creating a parachute effect

[@collinlaque964]

the missing window definitely doesn't help

[@dylanholbrook6239]

Kyle got his whole crew with him. Hes unstoppable

[@v65sabreking]

I love how everybody gets along so good.

[@SupremeRuleroftheWorld]

cleetus is a solid dude and everyone is just out to have a good time

[@michelerandall8131]

I just cant help smiling through every Plaidessey video you guys post. Happy to see it run at the track. Awesome build.

[@Monte1970SS]

It still funny to see a van and truck go that fast period. I'm use to big engine muscle cars wheeling for these times, now frigging trucks and vans daily drive it lmao. Us old school muscle cars gotta bump up the game....

[@SirSloop1919]

Improve the aero and it'll pick up MPH for sure! block out all the frunk/grill area, and block off the rear under the hatch

[@AlfaRomeo156SWGTA]

Yes, I was going to post the same. It has so much more potential, and a tiny bit of weight loss will help to. But better aerodynamics is super important at high speeds. Closed front, flat bottom and attention to details. Needs passenger side window first. 145 mph+ and 9.40's for sure.

[@starfox_wr-45e93]

I remember the Trouser rescue mission 🤣🤣 Those tail-lights were meant to be. So good man.

[@stevenzastrow7029]

Brent is such a genuine dude. Dude makes me laugh so hard I legit get teary eyed 🤣

[@critical]

Craaazy how it was faster without the launch thing and it even looked like you let off at the end of that run.. love the van!!

[@Yaboiporkchop]

Thanks for all the context Kyle, just for your safety you should probably get rid of that helmet, it’s technically not safe since it’s been in an “accident”

[@scootersfrog]

nah

[@michaelferik8060]

To say that van is a sleeper is the understatement of the year.

[@kyleshultis4246]

Always fun to see Brent all excited. Such a good dude.

[@popwarhomie]

RIP Trouser. Congrats on the win Kyle even though I love that F150 lol.

[@outsider7654]

3D printing your own plastic parts can save you time and money, also you would be able to make your own custom parts.

[@tc4539]

that thing fully charged in peak performance will run low 9s ALL DAY!! WOWWWWWW, incredible! can’t wait to see where you take it in the future.

[@906MediaProductions]

0:05 the helmet lifting up and over the rear seat hump from G force alone is insane. Edit: lmao now I see they talked about that later.

[@N-Krazy1976]

Kyle rocking the Dang Sauce! 🤣

[@chriskron2512]

2 words to summarize everything in this video... BAD ASS!!!! But let me explain, Jamie busting out of the 8's = Bad ass! Brent just being Brent = Bad Ass!, Cleet getting crushed for the 2nd time in a mini-van = Bad Ass!, Boosted Bois doing kick ass stuff = Bad Ass!! Kyle and Wyatt as team = Bad Ass Plaidessey = BAD ASS!!

[@fastsilverado]

I like Jamie but Brent being so upbeat and happy just seems creepy.

[@loganb5657]

Cleetus will never trust mini vans after this 😂

[@MikeB1972]

The race between the Rowdessey and Leroy is where I found the Boosted Boiz all those years ago. Great to see Cleetus and the Boiz both killin' it after all these years!

[@fullclip009]

Dam Kyle you spoiled Jamie's 7 second pass for me ! Lol

[@andyguest6543]

You need to take that back to the wind tunnel, see where all the air is going like into the cab and lifting that guillotine, it would be cool to see the big aero issues fixed to squeeze a little more out of it. Great job guys!

[@evannolan9031]

A better way to do the taillights would've been a trailer light module. On my Model 3 I used one from a company called Tekonsha, it converts PWM to analog. If you ever wanted to go back to the old lights keep it in mind!

[@hkeg80]

You need to put in a sound system and external speakers to make fake burnout noises when lining up and getting ready for a pull.

[@goosenotmaverick1156]

Just a sound clip of the rowdessy or MR2 burnouts 😂😂 I'm love it

[@timsmallsreed1349]

It's like an episode of This vs That. Except they are closely matched.

[@jesseshort8]

Brent's face when he punched it had me cracking up.

[@burgessschnitzius4987]

I had to watch your version first and you did not disappoint. Always a good day when you and Cleetus are going at it. BTW the reverse lights show just like brake lights with the current set up but no big deal.

[@caturlifelive]

watching it in the morning during breakfast... awesome as usual..

[@witext]

If you guys can patch her up so that the big metal plate stops lifting and give her nice paint job, she’ll be the coolest minivan your side the Atlantic

[@jeorgefranco25]

Congrats Jamie and PFI !!!!

[@CerebralAilment]

9.6 @ 139 thats insane!

[@donalddarbonne779]

Instant smile from Brent. That's performance.

[@BorisZX6R]

Do you think having a window in the right passenger door would make a difference, and how much ?!

[@hi_tech_reptiles]

Im gonna have to go watch youre old vids, didnt know you had a pet snake! Haha, love it. Ive got some boas and pythons myself. And leopard geckos. I dont have a problem tho i dunno what youre talking about 😮 Great vid, the Plaidessey is awesome!

[@JonnyWho]

I found you guys from racing Cleetus in the Rowdyssey. This was such a good matchup.

[@jerbrony]

I’m so happy for Jamie he went from the badluck neon to a fast ass Honda 😅

[@JosephJonesboy88]

Jamie LETS FREAKING GO BROTHER, a 7 second fwd car is a serious accomplishment and he has worked his ass off to get that fast congrats buddy! And Kyle you really need to reach out to Elon Musk and get him to build a man van because I know every dad in my life would kill to have a van that can run 9’s all day

[@PLEASEMAKEANOTEOFIT]

As you start getting offers for your 1000 horsepower electric minivan conversions my suggestion to make them look really cool... is to pick up on that black on Silver Motif that you have with your original vehicle and compose a Audi R8 style stainless steel rhomboid side panel or black side panel against the silver to give it that German car look (!) I think it would look fantastic cuz it needs to look more wolf and less sheep! Sleepers rule!

[@GaZaai]

You should speak to Ingenext and see if they can tune the Plaidessey. There Model S Plaid hits 216mph

[@austin.england]

I really like that we can tell that your reactions and emotions are legit. Unlike a couple of other popular KZbinrs that I really like watching, they always seem to forget to take their ADHD medication… Anyways, awesome job on the Plaidessey! I'm predicting that we end up seeing some crazy fast soccer-mom Tesla vans in the future.

[@busarob1969]

Hey Kylie, maybe block up the air vents for the mini van radiator, stop that air getting into the front and then into the van, also can’t help think what’s going on with the hole in the inside back of the van, maybe if you can improve the area drag of that van, it may do a 9.2 ?

[@chrismclag2258]

Just finished cleetus video but had to come see if you had yours up yet. To see that minivan do that effortlessly against a truck that is modded and on tyres and screaming is crazy.

[@ike8236]

You need a fill panel for the rear of the van, extend the skid plate from the tesla to the rear bumber, thats got to be creating a lot of drag.

[@jimmynickels6248]

Fun video! I watch both channels separately and didn’t expect to see a combo like this. Great job.

[@AndrewTSq]

haha that race against the F150 was nuts. 2 cars that should not do 9 runs on the strip :D :D

[@kick_then_shift]

It's only a 10th or 2 off, but the van still needs a cage and proper safety equipment and alot or panels made so the wind isn't blowing right inside that cab.

[@bubbabrown6917]

The look on Brent’s face is absolutely priceless

[@simplycruising687]

Kyle can you take this to some cash days 😂😂 it would be hilarious

[@jessemorgan3409]

You should take it back to the wind tunnel and find out where yer grabbing air on the front and start plating/paneling off those are. 0.2 off your pb could be in drag loss.

[@Danger-Dave]

Plaidessey needs a slick paint job and some front end aero to eek out a few more tenths.....but then it wouldn't be such a believable sleeper.

[@jackkrupka3024]

Cleetus just can't handle them odysseys' man! Definitely his kryptonite!😂

[@mamaleighcase1569]

Wow Kyle!!! You created a monster 👾!!! You amaze me with Your skills and knowledge!!! I been watching you and the Boosted Boi'z for 5 years now. You are an amazing bunch of guys!!! Aloha from Hawai'i and Mama Leigh ❤❤❤❤

[@kenpolloperez18lyf]

When kyle said “ Excuses “ it got me 🤣

[@bowtieenthusiast6672]

all that air flowing into the cabin gotta be slowing it down a ton! if you guys block off some of the holes in the grill and front end i bet it would pick up some mph

[@MrTugone69]

Brent is such a channel slot, love his work ethics 🤙🤙

[@onelowvdub]

for the hatch light you just need some 12v fees 12 from the Tesla into the body harness on the Odyssey

[@dannygamble7033]

Dude loving brent in the starlet

[@joelblair8339]

Whoop, that made the whole build worth it.

[@wrxburton]

Just one piece clear wrap the front so it looks stock but covers the air gaps and holes

[@1960ken144]

absolutely love seeing you and brent together !!!

[@joerunge3915]

probably would go faster with a passenger window. Would be cool to do little things to the van in the wind tunnel.

[@jason454ss]

Now that's it's been tested just needs all those little things finished up. Take your time and make it right.

[@coop632]

Not sure if the Tesla uses any sort of radiator but. You might be able to just block all the air flowing in the front grill. To help with the dash panel and more screws lol

[@francowalters3958]

Kyle’s gone from cooking meal to cooking tail lights 🤣

[@HighDefBNG]

I remember Trowser getting fished out lol. Man time flies. Well done Jamie! OMG I didn't realise your lid fell out of the wheel well!

[@farmerkevin]

Boosted Boiz FTW! Nice. That Civic exhaust is super sexy. Keep them coming.

[@upurkilt7246]

That little starlet gt looks exactly like the one i had😢. The mini van is fleet af kyle nice job you guys done👍

[@mgsalsa3928]

Would putting in a solid grill cut down on some of the air drag?

[@ratmanmurray7137]

Never be late for soccer practice in that minivan haha Greetings from Down Under

[@gabrielcollazo6835]

Need to build a plate behind the grill. That grill pushing into the dash plate n cabin is basically a giant parachute

[@dionbrown5200]

Gotta respect Wyatt for being out there. Sounds sick as. Or had to many twisted teas

[@a1cwingo]

Okay... just made an order. Let's get some entries baby!!!! Dream car right here.... .

[@michaelmcclure3043]

Loved Brent's face. Dropped the video same time as Garrett

[@Diegoabad37]

You should do it on a 2003 Honda accord with the Tesla swap 🔥

[@mbee1337]

I'm not into civics, but that exhaust is a reason for buying the car, just to mount this beauty 😂

[@DaleBladez]

Idk if it’s because it’s a van but it does not look like 140+ going through the traps but the proof is in the pudding haha.

[@itzdart]

You should’ve fully charged it or over 90% cause when it’s under 90% the actual peek hp /torque is less and it much slower around 70%

[@HoldenBurke]

Banger after banger after banger... you really don't stop!!

[@txddyfarquh69]

Cleetus about to come bacc with his work truck powered by a Plaid setup😅😅😅

[@lukejohnson7282]

Put a piece of sheet metal painted black behind the grill where the radiator would be so that air isn’t pushing through the engine and cabin and it all goes over the hood.

[@chrisoh6627]

Great seeing you beat cleetus!!! You can tell he is extremely competitive!!

[@royhenson3379]

Almost perfect for a 9.50 drag & drive event Van.

[@Derelictos]

Glad to see that you’re keeping the cat. Can’t stand the smell of incomplete combustion

[@praiseemo8733]

Bret: "You actually have to be cautious caue thats alot" Floors it again xD

[@douglasmcdowall5006]

I love Brent, he's just a big kid. lol

[@mikehoncho5469]

Congratulations Jamie!

[@eel1331]

If you cover the airflow vents from the back of the bumper and screw down that plate on the dash i bet the back half would be a lot better

[@patrickstrom314]

Be cool to see some street racing in Mexico with both vans

[@keithlaub7964]

If that aluminum sheet comes undone your really going to wish you put more screws in it

[@budddove6480]

Kyle you're a lucky guy bro. When I lost my pet snake in a mini van, my son was born 9 months later.

[@tonycoffee7335]

Cleetus didnt loose to just a minivan, he lost an electric minivan.

[@PSwayBeats]

You should really put some more supports for the Odyssey body sounds like a tin can rattling around

[@LieutenantDanVic]

Shout out to the goonsquad dang sauce on that stove 😂😂😂 @4:13

[@SpencerFPV95]

Kyle homie you HAVE to clean your oven door glass LOL

[@dylanmcruse]

Need to roll up that passenger window for the next drag run.

[@UCCLdIk6R5ECGtaGm7oqO-TQ]

I wonder if Electric Garage would be up for making a race pack battery for it.

[@Just_a_random_birb]

it will be very expensive!

[@24_7gamingwithfriends7]

I still think the aero on the plaidessey should be properly done (fill in the grille fill in all holes in the floor or put a smooth underside in) I would also think a grippier tire could help all of that together would definitely add to the gap on cleetus

[@wr3ckt4ngl3]

Brent makes any video 1000x better