The Portable Bluetooth Stereo Speaker How to Open and How to Increase Battery Life

Here you can see the products which i used in this video
AliExpress s.click.aliexpr...
See my blog for products which I used in this video:diy-tipstricks...
In this video I will show you how to open and how to increse the autonomy and capacity of the batery from the portable bluetuth speaker.
Battery Capacity:it is 520mAh and I will increase it at 4400mAh
I used Li-ion battery cells from a laptop battery
Thank you for Watching . And do not forget, Like and Subscribe
Due to factors beyond the control of DIY Tips&Tricks, it can not guarantee against unauthorized modifications of this information or improper use of this information. DIY Tips&Tricks assumes no liability for property damage or damage incurred as a result of any of the information contained in this video. DIY Tips&Tricks recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of DIY Tips&Tricks, no information contained in this video will create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from the improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not DIY Tips&Tricks.

[@CMCdiy]

Another interesting video: Bring to LIFE or REVIVE Unusable BOX SPEAKER ,, CT14,, kzbin.info/www/bejne/eWXPY3yMd8d8m9E

[@hotdog.gaming2420]

DIY Tips&Tricks jh

[@HamZa-nz6he]

Thank you, now my speaker looks like a bomb.

[@b5234t5]

This is so useful. I have a speaker that looks like one in the video. So it isn’t difficult to follow the instruction given.

[@rogersbonettmb]

Thanks for this video. I'm just wondering how to do a li ion battery pack with negative, positive and data cable as well. My Sony XB30 bluetooth speaker has 3 connectors on the battery port. What happens if I make the battery pack without that third port?

[@advvaibhavvashisht9399]

I removed the charging protection board from the battery and put the battery directly to plus and minus, wires, it there something I should worry about or take care of?

[@sun7975]

hi,i have one of this speaker, and i can not find the company name or model number things like that, can you tell me some info about this speaker. hope you will see this comment. thank you

[@CMCdiy]

I don't have the company name either. but what do you want to know about this speaker? It's small, has a 3w speaker and sounds pretty good

[@sun7975]

Luk DIY i want to know this speaker info. Cause i have same one i don't use at all try sell it. So i need know all the info like model number this item name (example iPhone 10 model ××××××)so i can tell them what's about this. If you know some info Please Let me know thanks

[@leandrox1]

hello...good video...thats my question...I have a blue piston bluetooth speaker...similar to this device...work fine...but,my blue piston have just one speaker...I open it and I noted just two audio cables to the speaker...(not three as in one stereo device)...and you in your video said that this device is "stereo" (6:50 min) my question is...there is a way that my blue piston become STEREO???...or the input signal is already in mono???...I would like to make my bluetooth speaker stereo with sum another speaker...

[@doodsilog]

Thank you sir for this video. I tried to swap batteries and nearly fried my bluetooth speaker board. I almost bought some small modules but this saved me a dollar.

[@smartyshobu]

I have similar speaker. But not making any noise like blutooth activated and mot able to detect in phone as well.. Guide me to fix it. Or provide a solution to it pls

[@youtuberc1398]

Is it safe to use two 18650 35A 3600mAh.? Please reply.. Thanks

[@mhanel30]

KZbinr C dont use highdrain battery. Just a normal laptop battery is enough.

[@youtuberc1398]

@@mhanel30 but i already installed ncr18650b battery,3400 mAh is it ok sir. But it works, i don't know when it comes to charge.

[@leandrox1]

hello...good video...thats my question...I have a blue piston bluetooth speaker...similar to this device...work fine...but,my blue piston have just one speaker...I open it and I noted just two audio cables to the speaker...(not three as in one stereo device)...and you in your video said that this device is "stereo" (6:50 min) my question is...there is a way that my blue piston become STEREO???...or the input signal is already in mono???...I would like to make my bluetooth speaker stereo with sum another speaker...

[@samsmithbr]

Did you ever open the Taotronics Pulse X TT - SK10 ?? If so,, could you please send me the link to the video, Thanks!

[@ashwinikumarbehera6563]

Can I connect 4 or 6 batteries with it ? Will it do any harm to the circuit board ?

[@Satya_Prasad.]

It's noo problem u can try again!!!

[@zoytiv]

hei man..i have a threr btteries how do i convert that three into one..my battery has no silver copper like ur batteries..tnx for help

[@CMCdiy]

hi. You buy a battery holder, and you will use them like the batteries on the TV remote control

[@raj68k]

I have the same exact speaker but my Volume Control can only decrease but not increase can you help me with that issue

[@coskunkocagoz792]

I have a weird question...is there a way to change the announcement sounds of the device? Mine speaks with a weird accent while turning on, turning off and between the modes.

[@sanjuktaadhikari1203]

You've to change the IC of the speaker. So the sound will upgrade and TALKBACK feature will be changed.....

[@vishtomar]

I love this video and I would certainly like to know how to go about it, I am having right now an artis speaker which is having a battery capacity to last for like 5 hours but it is not lasting more than two and a half so I want to change its battery so as to get the better output in terms of. But don't think that I am not an expert and I would really like to know how can I do it and which battery shall I buy to enhance the better life of my bluetooth speaker it is a 20 watt speaker and I will be looking forward for your reply thank you.

[@aarriikknn33ll]

just make sure that tye type of bzttery is the same, and tye voltage that the battery puts out is alwo the same. So if you would have a 3.7v lithium battery, using a new lithium 3.7v will work too,

[@100roberthenry]

cool, what is actually on the charge protection board?....

[@CMCdiy]

correct, protection PCB board for Lithium

[@100roberthenry]

@@CMCdiy cheers , but what components are they diodes?...

[@zyviazg]

What apps u use to add the generated sound to this?

[@Justin-yr6qv]

I had this same speaker..and it was the best, strong and played loud and the bass from it was good

[@infinitemoviecollections6403]

Iven been doing that to replace broken batteries of mini bluetooth speaker. but I can't to do it the right way.

[@CMCdiy]

it is not very difficult. you have to follow the steps

[@thabokhumalo1082]

Wow this is a good idea even the people can use your ideas to upgrade the batterys for the Bluetooth speaker and can Last longer when you play music on the Bluetooth speaker but l want to Let you know also l have a idea when you posting a video about a Bluetooth speaker l have a questions about what will happen when you try to upgrade your Bluetooth speaker with higher voltage only using a battery what will happen when you connect them battery to the motherboard in a higher voltage what will happen?

[@barolihousebsr3137]

sir i also have the same company speaker but when ever i start it its blue light just glow for 2 seconds then it's voice start cracking then it's off . plz tell me what to do it's new

[@CMCdiy]

Hi These are symptoms of a discharged battery. Try to load it and then test it again. If it does not work, it means the battery is dead.

[@flowswiftkey9287]

@@CMCdiy вы супер молодцы

[@genius8245]

Battery is dead. This can work with conected charger.

[@adnanfahad]

I have 4.5 bettery in speaker so how should i replace to lethen iron bettery help plz

[@adnanfahad]

U can contact me on [e-mail]

[@genius8245]

I have the same device but battery doesn't last long, i must connect charger to hear music. Where can i find battery for this device !

[@CMCdiy]

hi, Genius you can use a phone battery to fit into the device, you can also attach a power bank

[@genius8245]

@@CMCdiy Thanks, it was helpful for me.

[@diyshow888]

I have the same speaker too, but not works, I guess it's the issue of battery

[@isabelaako6215]

Hey dude can u add PAM8403 with potentiometer to add volume to the bluetooth speaker

[@arupchatto]

Sir, please tell me if I put two 18650 in parallel connection, will it do any harm to the speaker? Will it increase the run time?

[@CMCdiy]

Yes my friend Arup, will not be any harm to the speaker and will increase the time!

[@jucam]

Hello, I have a ridiculous question, When i turn on the speaker, the speaker plays a annoying intro sound, i made a research and i can't find enough data to delate the intro sound, if you know something it will be awesome for me. I know the problem is on the PCB but not sure where.

[@limeeirfan6896]

Does it sound "The Bluethooth dhevise is reedy to per"?

[@a.rsaiyed4397]

Can u show a full tutorial on how to open the top also with the speaker

[@mrhkexperiment]

love it

[@roubaabdulsater9321]

hii how can turn it ??on my phone

[@АлександрАнатольевич-щ3ю]

Топорная работа но по уму ! Спасибо !

[@Fernando-mf2ph]

does it work without the battery?

[@getin6]

Hi there how do I connect to Bluetooth to my phone lost the instruction manual

[@karolyvarga8872]

Switch bluetooth on on your phone.Switch device on.Its name will appear in bl.menu.Click on it and wait until it connects.Done.

[@alexgloba9.90]

Hi fellow, what about power Bank?

[@priteshbarolia7881]

What is the name of this speaker??

[@sanju_mudhiraj9919]

Super dued👍👍👊👊

[@gulamansary614]

Thanks bro...All is well but I am confused about the two batteries positive and negative position... how you have joined... Please show clearly to better understand

[@aderfigueroa]

Gulam Ansary he said its the same voltage 3.5 but more capacity, it will last double the time.

[@rajendraks593]

He added two batteries in parallel. Means positive to positive connection and negative to negative connection together. Then taking output from there. My confusion here is what will be the actual voltage in this case because two batteries are in parallel.

[@kushalbhaskar4401]

@@rajendraks593 As the batteries are in parallel the voltage will remain same as one previously was, that is 3.7 volt, but the ampere will be doubled.... Say if one battery is 2200 mah, then now it will be 4400 mah.... Voltage of a Li-Ion battery is 3.7, not 3.5.... Charging voltage 4.2, and maximum discharge voltage 2.7 volt....

[@bunsunardin9290]

Can you do it with CAS?

[@MrTauron77]

You could have extended your bluetooth loudspeaker to a bluetooth adapter with the same diameter PVC tube and you could use at least four Li-ion batteries.

[@bunsunardin9290]

can you use a cellphone battery?

[@johnysilver1853]

How do disassemble upper part and remove speaker?

[@CMCdiy]

This speaker is glued with special adhesive

[@johnysilver1853]

@@CMCdiy yes I opened it pryed mesh on one side with small flat screw drive, glue very strong need sharp knife to cut it and open it

[@km.productions]

Excellent project my friend!!! What kind a tape use for sealing at the end??

[@sovikadhya9713]

Kon sa brand ha yeh Bluetooth speaker....mujhe kharid na ha

[@My2690]

Varni ka ata he same

[@thabokhumalo1082]

If you want to take me idea you must start with smaller to bigger Bluetooth speaker to find out which can handle the voltage?

[@EdgardoDC]

Do you know how to open the inside of it? I want to use the driver it comes with and add a second one and create a custom box for them with the same sound card.

[@sanaappuhami]

Bro I update my bluetooth speaker not charging how to fix

[@ultimateriderutkarsh7705]

Can we use 3.7 v 4 batteries to run big speakers

[@jzbreezio]

I was writing down notes on paper, until i read the comments and simply just used a power bank. Wallah! Thanks guys

[@sahalytackurr8463]

Can I use six volt battery

[@CMCdiy]

No, maximum 4.2v and only li-ion

[@RajuKumar-ku5ub]

Nice

[@stelilusca]

You can use a cell phone battery From old nokia for example and perhaps will fit inside and have better capacity. or make a new bigger cover

[@rosariosandate8713]

how is that?

[@syehfg172]

Can i use battrerybfor vaping?

[@loveyourfreetimenow3270]

good video!

[@CMCdiy]

Thanks!

[@marjvlog28]

How to charge why only redlight to charge

[@christianruss5012]

Muy parecido a lo que le se agregar 2 baterías más y aislamiento con cinta negra por falta de espacio en el interior del equipo.

[@amitj7373]

It's became more portable if you use mobile battery which is of 3k to 4k mah. You can also put that inside the body.

[@christianatienza3527]

Good intention. But in reality you just hook it up with a power bank.

[@leiladekwatro3147]

Imean yeah it DID increase battery life tho

[@Mark_Sixpho]

how to know if it is full charge

[@robertoconceicao3333]

Thanks for the video I wrote myself

[@singhsingh9885]

Hwo to make price of bluthut spker

[@Basu01125]

Super talented bro 😎

[@CMCdiy]

Thank you bro,😉

[@alessandromichieli1064]

Why not using a Power Bank? 🤔

[@ricardovictorio4808]

Alex Michi h

[@amitj7373]

Then it's not portable anymore, you've to carry power bank with it.

[@wenkysoul6091]

Bluetooth specker and power bank connect to specker. Verry esy no hazel hejej

[@Bro12351]

Ya that is a grate idea

[@ultimateriderutkarsh7705]

Bro it support 3.7v not 5v 😎😎

[@Y2Kvids]

Don't take this to airport.

[@rexinoff1810]

Why??

[@reymarkcamangyan8474]

@@rexinoff1810 because security personnel would think it's a bomb, that's why.

[@rexinoff1810]

@@reymarkcamangyan8474 thanks

[@mevlutdoganay8591]

I bought a bluetooth speaker, and with only 19 Turkish lira, I developed it very cheaply. I'm Turkish 🇹🇷🇹🇷🇹🇷🇹🇷🇹🇷🇹🇷

[@vladimirship70]

Только заряжаться теперь это будет целую вечность. Зарядный модеуль можно было использовать отдельно...

[@doughy67]

All very good but it looks terrible

[@lord_tarush]

Gary Rivett no you cover with some color paper

[@joesinister2199]

Good luck getting that on a plane 🤣

[@torukojinnn6331]

🤣🤣

[@nikolaos9906]

Hello and how can I charge the batteries?

[@CMCdiy]

Normal. How to load it before. With the usb cable

[@1234mattyman]

NIKOLAOS BOURTZOS just use a mini USB cable and charge like normal the 🔊 has and on board charger so it's all good

[@IrfanAnsari-fw9ke]

Bhai bettry kitna ka milega

[@tapok_na_vpiske]

Надо было понижающий модуль и машинный аккамулятор на термосопли прихуячить

[@licex5143]

Шоб 10 лет без остоновки играла

[@user-bf2jv8nf4p]

@@licex5143 а потом ещё и правнукам осталась

[@My2690]

I have same speaker but I used samsung guru small mobile battery which is easily fit inside

[@vinovk6483]

How to open TDK TREK MINI BLUETOOTH WIRELESS SPEAKER ?

[@raycastillo5843]

Where can I check the volts of my battery. It says only 2400 mAH.

[@darkcrox]

multimeter

[@KaNe_1771]

thenks

[@oskarpolanski3152]

*-you have the same voice as pink sheep......-*

[@gabrielvieira6529]

Oskar Polański true

[@edifierbass7821]

Looks obvious , make some good housing for the battery to make it presentable

[@ДедМартыненко]

И какой тогда смысл от миниатюрной колонки ? Тогда от трактора аккумулятор и вуаля вечная колонка !

[@vladimir-dxdx7653]

А что ты предлагаешь. Один парень с похожей колонкой писал, что от Нокиа 600 mAh не влазят. Подделку акумулятора снял и подделку на али купил. Не выбрасывать же, а так поставил на стол и слушаешь. Акумуляторы от ноутбука долго пашут.

[@salimKhan-fi2ti]

Charging about as 10 minute battery hot. And not full charge. And speker on playing 10... 20 minuts battery low

[@PhaQ2]

Stereo requires 2 speakers. There is nothing stereo about this.

[@JDhvactech]

Pha Q incorrect stereo requires two channels not two speakers

[@yudaseptiawan1094]

@@JDhvactech But 1 channel needs 1 speaker. It means 2 channels = 2 speakers. So yes, stereo requires 2 speakers.

[@JDhvactech]

@@yudaseptiawan1094 A single stereo speaker plays both left and right channels from one speaker using one woofer and two seperate tweeters, so you still need to wire two sets of speaker cables (left and right!) but you'll connect it to one physical speaker unit.

[@yudaseptiawan1094]

@@JDhvactech I didn't say about speaker unit. I said about speaker itself. You said that the speaker unit contains 2 tweeters & 1 subwoofer, it has 3 speakers in it. So yeah, it can be stereo. Because it contains more than 2 speakers.

[@JDhvactech]

@@yudaseptiawan1094 can contain, and since different frequenies can be crossed over in one speaker you can have stero in one speaker, the channels being high med lo

[@Polo2driver]

Powerbank ?!

[@Qui-9]

That's silly, why not just either physically attach the power bank to it, or better, build both into a small enclosure?

[@ramchandragawas3082]

GOOD

[@CMCdiy]

Thank you Ramchandra

[@fahad_ibrah1m89]

Would u show how to open speaker part?

[@princerana1332]

The sound will increase by changing battery

[@mr.ibrahimmughal8275]

nice

[@dulcedalagonan3648]

In minecraft that voice sound like pinksheep

[@mraxy8975]

I did this on my speaker

[@bastiatintheandes4958]

Do you REALLY need to add that noise as a background for your video?

[@fodordavid7272]

Stereo with 1 speaker?

[@envyone7]

perhaps you don't know about portability,you have have made portable as "BULKY".thanks

[@rustywrench500]

Perhaps you don't know how to talk English properly 😂 and if you couldn't do this by yourself then you were already and idiot.

[@elibert1668]

Good intentions but, too many effort... Maybe i used power bank with high mAh ,,

[@leonardobuitrago1342]

Queda mui bueno asi

[@mr.electronicsdevicevlog9333]

He is using robot voice 🤖🤣🤣

[@nandatadas5468]

Background music name??

[@krystofpojer2670]

The speaker is not stereo because it dont have two speakers left and right channel

[@kushalbhaskar4401]

Instead of doing all this thing, you should hookup the Bluetooth speaker with a power bank....

[@okeania6529]

that is not stereo stereo as 2 speakers!

[@steniolimaa]

👏👏👏👏👏

[@hussainsaddam5390]

Bhai mere Bluetooth speaker ka output short ho gya tha T&G ka uske bad dono spekar band ho gye Baki connectivity chalu hai kaise resolve karu problem ko

[@xavierlongoria4562]

add a loud 20" speaker