The RC car EVERYBODY NEEDS!! HBX 16889a PRO

HBX 16889a PRO (one battery): www.banggood.c...
HBX 16889a Pro (2 batteries): www.banggood.c...
HBX 16889 (Brushless Motor-Not PRO version): www.banggood.c...
HBX 16889 (brushed motor): amzn.to/3i3CH72
Ovonic 2200 MAH 2S battery: amzn.to/3J9eB6L
Drywall tape/shoe goo video: • CHEAP RC CAR - UPGRADE...
This PRO version is a big improvement over the original 16889a. Having much more to offer for not much more money and being able to handle the abuse as the original. A slight odd thing that it cannot do, that the original can, has me a bit confused!!

[@leviroberts]

Thank you. My son loved this truck for his birthday. Bought it based off this video and we could not be happier. Only problem is I might need one for myself too.

[@DerbyCityRC]

Haha! Ya it’s addicting. Glad I could help! 😃

[@enricomiceli5517]

I got it today, deassembled and reassembled completely to put some oil in the diff and some grease, the car is very tough, good assembled and fun to play with!

[@DerbyCityRC]

Good job! And yes it’s a beast for such a small package!

[@cjg28]

Great video as always! I took your advice and ordered one. It just arrived from Hong Kong to the UK, took about 2 weeks! 🙌

[@DerbyCityRC]

Nice!! Hope you love it! It’s a good one!!

[@snapdiscgolf]

The 16899a brushless has a 2435 brushless motor, 3900KV. The 16899a Pro has a 2840 brushless 3500KV motor. So, while it is bigger, the Pro motor is not quite as fast, but has more torque. That's why it doesn't do backflips. However, it should handle larger tires better.

[@DerbyCityRC]

It does handle bigger tires better for sure. 👍👍

[@NoName-sx5fl]

For flips, you have to change the tire rotation speed to cause it to flip. If the bigger motor does not allow you to flip, I am guessing your wheels are already spinning at max speed before getting airborn. This might be because you have more power and the wheels start to spin out on the ramp before you get off the ground. Maybe try letting off the throttle once the tires are on the ramp, then hit the throttle once in the air. Alternatively, more traction on the ramp may fix the problem. It makes sense that a stronger motor would spin at max speed without being off the ground, because it is not bogged down by the little rc car.

[@DerbyCityRC]

Absolutely correct 😃👍

[@Hungrybird474]

Hardened metal gears is a big plus . I think they probably use d2 tool steel . It’s not a chippy steel when hardened and pretty available . They use it in a lot of knives . It’s a tool steel with high chromium content so it’s almost stainless at 12cr

[@DerbyCityRC]

Good info!

[@farmoboy83]

A more than proved formula. Will test my brushed version today in rain. If it survives it will definetly be the toughest and cheapest rc I've ever had!

[@DerbyCityRC]

That’s awesome! Let me know how it does!

[@farmoboy83]

@@DerbyCityRC passed with flying colors. Wet sand, puddles, wet tarmac and wet grass. The only thing is that on wet smooth tarmac is hard to find traction sometimes and mine is the brushed one with 390 motor. With brushless it probably is useless on full throttle on this conditions. Now it's time after dinner to clean it and dry with air drier. Also, a little bit of oil on bearings and a final spray of silicone as usual. Great car. Recommended for anyone experienced or not.

[@DerbyCityRC]

Great!! Yup! As I mentioned on the video, it’s a car for anyone! You’re doing it right by keeping it dry and oiling the bearings!

[@jameswisecarver]

That was heck of a whip onto the ramp it came in sideways I didnt think you had a chance but it landed that double perfectly

[@DerbyCityRC]

Thanks dude! That one, believe it or not, was my 5 year old. He has landed some amazing tricks with that truck!!

[@matthutch5919]

You sir are 1 of the coolest KZbinr out there. 💯 ❤️ the way you hand it over to your children to, let it rip. I've just brought myself a 16889a pro & my girlfriend 16889a. Don't diss me on that she is only new to the r.c world. ❤️ your review ❤️ seeing your kids rip it up, crash, nail it. R.C together stay together

[@DerbyCityRC]

Thanks man! Glad you feel that way. Yes super fun trucks. Can’t go wrong with any of them!

[@Eddiematias3131]

Hey bud I just started doing research on RC cars. From the results you were the most helpful. Thank you for the help. The link to the HBX 16889A Pro you posted is to a website I have never purchased before. Is that’s where you get all your inventory from? Looking forward for your response. Respectfully, Eddie.

[@DerbyCityRC]

Glad you found the videos helpful! I don’t get all my cars from Banggood, but quite a few of them. It’s a legit and popular website for these budget style cars. They do also accept PayPal. Here is an option that should be exactly the same, however I’ve heard by one person that theirs didn’t come with oil on the shocks. amzn.to/3NF1Zsn Thanks!

[@nicholasbevars8243]

Great video like always! I just got mine two weeks ago and agree on the battery life not being great. I'm going to give the ovonics a try, thanks for the suggestion

[@DerbyCityRC]

Thanks! Absolutely! It’s a great battery! Just make sure you get some battery straps with it. Amazon has some of those as well.

[@user-fd3we4cj6t]

Thank you for giving me the tip to buy this 168889A pro! Bought it for my kid and he is very happy with it. Had to wait long time for shipping unfortunatly but it's here. Want to buy some spare parts to make sure we don't have to wait so long again. Any tips on what to get for spares? What are the weak points? Thanks!

[@mikeashton2628]

Hey bud, hope the move has been smooth and family are well! Request: how's about a video of a body change/swap on one of these setups?!? I have a VW Beetle shell that is a touch too small but I think with some trimming will look sweeeeet! Or is it easier to just find a slightly smaller setup? Gotta say, I am a huge fan of this little beast's durability! Thanks again! Hope to see the new crib soon!

[@DerbyCityRC]

Thanks! We’re in the new place finally just basically walking through piles of boxes! Managed to get our TVs set up of course though! 🤣 I do plan on putting that mad beetle body on something. Would look good on this one I agree!! I’ll see if I can work that on on something here soon 👍👍 I’ll certainly be showing my new RC space once it’s in progress 😃 Thanks!

[@philiplibby4464]

Jeez that thing screems!

[@DerbyCityRC]

Yes!!! A screamer indeed!! I enjoy my HBX 2995 even more! Such a beast!! Thanks for watching!

[@bradsrcsmore3848]

Amazing truck! Fun video! I will never regret buying mine!!!! Put some heat shrink over the shaft pins so they dont pop out 😉 love it!!!!!

[@DerbyCityRC]

Thanks!!! Yes you told me to do the heat shrink and I forgot!! I will do that 😃😃👍

[@bradsrcsmore3848]

@@DerbyCityRC I pretty much do that to all my CVDs now 😁

[@DerbyCityRC]

Very solid advice!! 😎

[@waynewhisenant8725]

As always you have great reviews! I just scored one of those new today for $27.99 at an Amazon overstock store.

[@DerbyCityRC]

Thanks!! Oh dang man! Obviously that’s an awesome price!! So cool!

[@nativeson3233]

Got one of these coming Jan 4 from Amazon... Caught a DEAL! $80 TOTAL for the hbx 16889a pro. 1st rc truck I've had since I was probably 12...Im 36 😅

[@DerbyCityRC]

That’s a great deal!! Ya I just got back into the hobby in 2020. Had a couple toys when I was younger and I’m 34 lol!!!! So fun!! Plenty of people twice our age are into this 😀

[@nativeson3233]

@@DerbyCityRC I can dig it bro. I want to correct myself tho, I had purchased the base model, not the "a pro". Switched it tho, $159 but so what. I just ordered the HYPER Go H16BM Brushless 3S as well... The 2 seem to be the best 1:16 under $300 that can easily compete with cars 2x the price.

[@DerbyCityRC]

I agree they’re the 2 best 1/16s!

[@AndrewBurrowsCinematics]

I've just ordered one of these, it looks so much fun.

[@DerbyCityRC]

Awesome! They definitely are!!

[@anisghil]

Hello, what is the length of the schocks please? Does a 80mm shocks will fit ? Thank you

[@DerbyCityRC]

80 would be too long. I believe these are 65mm hole-to-hole

[@randyremus6348]

Get the lc racing monster truck tires they’re perfect size and it will back flip no problem and also do wheelies in reverse. I think the 2995 stock wheels on it are to big and they just make it a wheelie machine I think on carpet it might do a standing backflip with 2995 tires.

[@DerbyCityRC]

Thanks, that’s a good option! I don’t like the stock 2995 tires at all anyway. I’m gonna go overkill on the tires first like I showed in the video, then probably get those MTs or something similar. 👍👍 Thanks for watching!!

[@danarbogast3508]

The. Bigger motor version might have more torque but but less kv. More Wheel speed might be why the the small motor one does back flips. Test out their top speeds.

[@DerbyCityRC]

I agree this is probably the reason. I will be testing both top speeds very soon 👍👍

[@danarbogast3508]

Put them on carpet and see which one will do a standing back flip. Probably just the pro version is my guess

[@DerbyCityRC]

I’ll give that a try!

[@richiebledsoe1006]

I bought the reamer for the body holes works great on shoegoo and fiber'

[@DerbyCityRC]

Yes I ending up getting one lol, just didn’t have it for this. This body is still going 3 clips strong though!! Lol

[@iainlangley]

You really beat the snot out of that! Nice vid.

[@DerbyCityRC]

Thanks!! She took it very well!! Appreciate that very much.

[@rckiduk9439]

Nice jumps guys that’s one tough little truck 👍

[@DerbyCityRC]

Thanks my man!! Yes it sure is👍👍

[@desarioe]

Your bashing of this rc just made me buy it.

[@DerbyCityRC]

Awesome!! I think you’ll love it!

[@BradleyWilliamHughes]

Have you tried the 1/10 arrma granite voltage with a spektrum lipo upgrade? Can find the truck for $60 and the battery for $40. No mods required designed for this It will crush that hbx. Try it

[@DerbyCityRC]

Just got a new Arrma, but not the granite. I’ll look into that one. Thanks

[@michaelfitzgerald5272]

Derby City have you tried the bandit brushless vxl and brush they're both two wheel drive but they're awesome check them out make sure you have a wheelie bar on them they both have good speeds one's got 35 mph with a stock gear and then it has a high gear on it then the bandit VXL it's got the 75 mph gears check them out so you can do a post on them they do great and jumps and high speeds you and your kids I get a kick out of it great fan

[@DerbyCityRC]

Awesome, I’ll look into those. They sound pretty sweet. Thanks!!

[@shanec8224]

Having a hard time deciding between this 16889a Pro or the 18859a ... thoughts? Mainly gonna be driving in my backyard on short grass...

[@DerbyCityRC]

The pro is a much better car. I have to try really hard to break it, but I’ve broken the 18859a a couple times now. Plus the pro is more powerful with bigger wheels and will go through short grass with no problem at all. Definitely the best choice in my opinion.

[@shanec8224]

@@DerbyCityRC awesome! Thanks for the quick reply!!

[@DerbyCityRC]

You’re welcome!

[@sandiwiezycki2224]

That's a very strong-ass car for what you put it through

[@DerbyCityRC]

Hi Sandi!! I agree! She took a beating!! 🤣

[@sandiwiezycki2224]

@@DerbyCityRC she took a beating but kept on ripping, that's one tough little car, speaking of cars how many RCs do you have because I saw an awful lot of remotes.

[@DerbyCityRC]

Yup! I believe we have 12 😃🤣. More coming in the future!

[@sandiwiezycki2224]

@@DerbyCityRC my neighbor has just as many RC's as you maybe more but that's not a bad thing it just makes it harder to choose which one to run

[@DerbyCityRC]

I know!! My choice is usually easy cuz most of them are broken on any given day 🤣🤣

[@pootergriffin300]

awesome lil truck, thinking of getting a longer lasting battery though

[@DerbyCityRC]

Ya I usually use a bigger one and just strap it to the chassis brace. But yes, amazing truck!

[@darkki94]

The amount of abuse this can take is absurd .

[@DerbyCityRC]

I agree! Have you seen the video from before this one? The HBX 2995 can take just as much and it’s a larger scale! Amazing trucks!!

[@chrisyoung7988]

I’m just getting into the hobby with my daughter and son. We have a 124019 brushless and an infraction mega waiting for the brushless setup. They want to start a KZbin channel. Any advice on content creation. I love your videos. And figured I’d ask for advice. Camera, gps, and ramps. Anything helps brother keep it coming.

[@DerbyCityRC]

Hey that’s awesome! KZbin is a lot of work, so just make sure they have fun with it! Here is the gps I use: amzn.to/3xMv0dd It’s the only one I’ve got so I can’t really compare it. I’m sure a more expensive one would be much better. Here is a video to my ramp build from almost 2 years ago and they’re still holding on! kzbin.info/www/bejne/iZ_cooykiMhratE I actually record and edit EVERYTHING on my iPhone. I use a free editing app called InShot. And I pay a monthly ($7?) subscription for music at uppbeat.io But they also have a free version. Once the video is uploaded to YT, I use my laptop to add end screens and cards. Great hobby and I have a lot of fun with KZbin!!! Hope that all helps!! 👍👍

[@badtolz2122]

I got the 2995 a month or so ago. Love it. I think I'm grabbing this for my 8yr old for 100 bucks. GoolRC has it for 20? Less.... is it essentially the same car? It's not the Pro version. That big of a difference? Extra 50 bucksish worth? Thanks.

[@DerbyCityRC]

The pro version is definitely worth it! But yes GoolRC is the same

[@FeralRC]

Get that thing wings for how far it flies!

[@DerbyCityRC]

She does fly!!! Doesn’t beat that 2995 though!!

[@Funcentric]

Subscribed. I like your fast pace to the point approach. Good footage too.

[@DerbyCityRC]

Thanks! I like that too, and I make videos I enjoy. Thanks so much!

[@teehud313]

Welp.......it sure can take a beating!!!!

[@DerbyCityRC]

Oh ya! And it’s been through much more since I made this video lol

[@teehud313]

@@DerbyCityRC good to know!!!!!!

[@michaelstrafford6645]

The battery you use Ovonic 2200 MAH 2S battery does it fit the HBX 16889a PRO battery connecter without having to resolder anything and will the supplied battery charger work with the Ovonic 2200 MAH 2S battery and also how long Velcro battery strap do i need to buy ? thanks

[@DerbyCityRC]

Yes that battery is a deans connector and fits the hbx connector but doesn’t fit all the way down in the tray. I don’t remember for sure what size strap I used but I have a few different sizes I keep from 200mm to 300mm. Yes the stock charger will charge that battery.

[@Van_City]

Great power, sure held up good to the beating you put it through 👍💥

[@DerbyCityRC]

Definitely has power and certainly took abuse rather well!! 👊🤘😎😎

[@dereksreviews-collectables7185]

How do u charge it out the box without making it melt or over heat,as this happened with my first different car.I just plugged into wall by memory and didn’t have a special charger

[@DerbyCityRC]

I guess I don’t know what you mean. It comes with a USB charger you just need to plug it into a usb to wall adapter. Don’t ever use a charger nor intended for lipo batteries.

[@nicolatesla2315]

Your videos are awesome. Your Awesome.

[@DerbyCityRC]

Thanks so much!

[@joshhindle8946]

Wicked mine with the 2440(4600kv) all stock insides. and 2445 5400 kV all metal are insane ... The 5400 kV needs 60 amp ESC which should be great. Bro the 2440 4600 is great for this car. This is so sick to see the abuse they'll take. Sickkkk.

[@DerbyCityRC]

Thanks man! Yes it’s awesome how strong these little beasts are! Glad you enjoyed!!

[@polishguywithhardtospellna8227]

Gotta say, your kids have highly trained shin bones! 😅😂🤣

[@DerbyCityRC]

🤣🤣definitely!

[@richiesavino9653]

Is the drivetrain on yours noisey when your on the throttle while airborne? Mine was out of the box I greased the diffs and checked the mesh in all gears but the noise persists. Love the channel top notch content and editing!🤙🤙

[@DerbyCityRC]

They’re all Slightly noises as metal gears just make noise naturally. So it’s hard to say, just check for any visible issues and keep rolling. Or you could always reach out to hbx if you think there’s a warranty issue.

[@ferdinandmaier1070]

Today i tried a 3s lipo for the first time. And together with bigger wheels it flips like crazy. Have you recognized any issue with 3s in the meantime?

[@DerbyCityRC]

I’ve ran my 16890 on 3s a few times. Similar car. Slightly smaller motor but same esc. It will run on 3s, I believe I got 37mph. Motor gets real hot and also sometimes applies the brakes on its own, oddly enough, but otherwise it’s been fine so far. I will be running a 3s on my 16889a pro soon!

[@DerbyCityRC]

That’s interesting. I haven’t tried 3s yet on the pro. You would think the bigger motor would help!

[@DerbyCityRC]

Weird! Well thanks! Glad you like the videos!!

[@joshuamei7465]

Impressive durability from that thing! What do you think of the Wltoys 124016/7 v2 compared to this HBX? Which one is more durable?

[@DerbyCityRC]

I don’t have either of those WL toys, but from the 144001 and 144010 that I have, plus what I’ve heard about, HBX is far superior in durability! So far, HBX are probably the most durable cars I have.

[@zizouchannelis]

This one compared to the latest and new Hyper go Mjx 16208 and 16207, which one you think is tougher and better bang for the money? Because both are same price? Keep up the good work dude! Your videos are awesome!

[@DerbyCityRC]

Thanks!!! I actually have the 16208 on the way so I should know pretty soon! I chose that over the 16207 because it is set up for bashing with a higher ground clearance and beefy bumpers, but man is that 16207 a sweet looking buggy!

[@zizouchannelis]

@@DerbyCityRC Thank you for the reply, i was asking your advice in which one you think is a good choice now in 2022 between the 16208 and the Hbx 16889a Pro in this video? Which one is more durable and different types of batteries more compatible? And as you said I'm not a big fun of buggy 16207 I tried it and it was completely uncontrollable it's like somehow overpowered. Looking forward to your answer. Thank you.

[@Orionman8]

When I will give it for my son. Is it possible to limit the speed? 50 km/h is to much.

[@peteralbury7724]

Wanting to get into this hobby and I have the stupid newbe question. I already decided on this car . My question is . How many of these exact cars would be able to run at the same time ?

[@DerbyCityRC]

Great choice. I don’t believe there is a limit. But I’ve never tried. 2-3 at the very least shouldn’t be a problem. Each controller binds to whichever car is turned on, so you just turn one car on, then a remote, then the next car and next remote. One set of car/remote at a time.

[@peteralbury7724]

Was hoping that I could run 8 to 10 at a time

[@DerbyCityRC]

Upon a quick google search. I’m seeing somewhere between 6-10 as the limit for 2.4 ghz, which all the controllers I’ve ever seen are.

[@peteralbury7724]

Great video by the way. Thanks you so much for your quick and honest reply s

[@DerbyCityRC]

Thanks!! And you’re very welcome!

[@williamperri3437]

I returned the non pro version last week because it had lag... Got a full refund even after running it but I took it apart 3 or 4 times and couldn't get rid of the lag.... And I swear I saw the pro version for 127.00 from Amazon NOT Bangood (what's up with the name) and I knew I should have ordered it cuz now it's 137.00 to 160.00. I love it though and actually hope that the metal drivetrain is as good as the plastic because for something that light we might not need metal... Love that thing

[@williamperri3437]

And in your link the one with one battery is like $34 less than 2 batteries. The one for $113 definitely has the transmitter, right? I loved the Brushed actually and the older body. The horrible springy shocks even looked kind of funny and entertaining to watch!

[@DerbyCityRC]

I agree the springiness is fun to watch 🤣🤣. Ya that $113.99 shows that it includes everything. Just one battery. It’s a flash sale so once they run out, the sale is off. That’s even cheaper than I got it for. I believe I paid $117. I don’t get discounts or anything, either. Maybe one day!

[@williamperri3437]

@@DerbyCityRC do you think it'll get to me if I order from banggood before the earliest Posted date? I've heard people say that! And I don't want to wait 3 weeks to a month 😂 only thing good about that is you'll forget it's coming and then look outside and have an RC... otherwise it's torture even in my 40s! 😂

[@DerbyCityRC]

Lol ya it sucks waiting so long. Hard to say. When I ordered it, they were o of stock so it took about 2 months to get Mine. With them currently in stock, you should probably order lol. I think these cars are usually quicker. Many times they say 1 week delivery but I would still expect 2 weeks.

[@williamperri3437]

@@DerbyCityRC I guess I'll order it tonight and spend a little bit more money! The thing is if I do order now you never know they could be on backorder until summer and my God I love these things!

[@jaydelacruz1099]

I'm purchasing this car based on your recommendation.😁 Just want to know if the ESC has low battery charge protection? Thanks

[@DerbyCityRC]

Awesome! Yes it does 👍👍

[@owen8538]

Try get adapters an fit 1 8 scale wheels lets see how it performs come on do it be the proper over sized tyre fitter

[@DerbyCityRC]

Haha! I’ve got videos with 1/10 wheels on it and it’s awesome!! Surely you’ve seen those come on!!! 🤣🤣

[@owen8538]

​@DerbyCityRC Yeah come on let's go big 🤣🤣

[@DerbyCityRC]

🤣🤣

[@owen8538]

@@DerbyCityRC I fitted another bumper 2 back as wheelie bar comes with it an I have ordered front bumper from China plus sand wheels come on let s go big .I once was rc Champion of malta

[@tyrellcorp2118]

In a previous video you mentioned you’ve never broken a plastic driveshaft. So is there any benefit to the metal ones? If not, they’re a downgrade. Thanks for the vids, I’ve been considering a budget jumper and you have the best vids to see how they hold up and perform in the air.

[@DerbyCityRC]

Thanks man! True I have not actually broken a plastic shaft, but what has happened quite a bit is the screw that holds the wheel onto the plastic shafts breaks off inside the plastic. You can’t use standard wheel nuts on them either so fitting larger tires doesn’t work out well. If you plan on keeping the stock tires, the plastic is definitely not a bad option, but eventually one of those screws may still break.👍👍

[@tyrellcorp2118]

@@DerbyCityRC thanks for the info. I am planning on bigger tires, so I’ll also go with the metal driveshafts.

[@DerbyCityRC]

What do you have? Standard 16889a? What tires you plan on using?

[@tyrellcorp2118]

@@DerbyCityRC Don’t have a 16889. Still evaluating which smaller scale to get. I want a durable jumper that’s balanced in the air for stunts/backflips. WL Toys 14402 and LC Racing EMB-MT are other contenders.

[@DerbyCityRC]

@@tyrellcorp2118 awesome! Working on a 16889a vs 901a video now. 901a is a 12th scale so a bit bigger

[@travisedwards6837]

You can slap a 2000 man battery it need a little finagleing bit it works last forever.

[@DerbyCityRC]

That’s basically what I do. Lol send it!

[@usethatflame]

Hey mate just wondering if you had a recommendation on some better shocks especially for the rear cheers

[@islandrc-duke1972]

cool rc and great bashing brother

[@DerbyCityRC]

Thanks my friend!!

[@islandrc-duke1972]

@@DerbyCityRC 😁👍

[@robertnorris8367]

What battery life do you get from the pro? I’m considering this truck as my first hobby level rc car. Still a good truck to get into the hobby heading into 2024?

[@DerbyCityRC]

It’s actually pretty good even with the little battery. It’s atleast 15 minutes. This depends on what you want. There’s this one here which to me is more fun, plus bigger. Still extremely durable, though because it’s bigger it’s not quite as durable as the pro. kzbin.info/www/bejne/b57Il2Wsj7Fgm7ssi=Gy2NIIs0eeTkYe5M

[@DerbyCityRC]

There is also a newer version of the pro, which is 3s capable so more speed and power. That video I’m actually hoping to have out tomorrow. It’s this one: amzn.to/46FOaQU

[@FishHardGetLucky]

Does the aftermarket battery connect right to the car? Or do you have to modify the connectors? Just want to make sure I can charge the afternoon batteries with the stock charger and the aftermarket batteries hook up to the car. Link to the battery strap please. Thanks

[@DerbyCityRC]

Yes that battery will connect without mods, just won’t fit in the tray. I usually strap it to the top of the chassis brace with these straps here: amzn.to/3tPp4RO

[@FishHardGetLucky]

@@DerbyCityRC is the GoolRC 16889A on Amazon the same exact RC in your video?

[@DerbyCityRC]

@FishHardGetLucky yes it is!

[@owen8538]

Venom make the best battery for these 2400mah and it fits in

[@DerbyCityRC]

Good to know man, thanks!!

[@subrosanj1748]

What oil weight in the shocks have you found to be the best? I don't quite beat as hard as this but I feel like the suspension is a bit soft still.

[@DerbyCityRC]

So far, I have found that I like 80 weight. That is with larger tires, but I still think 80 would do good on stock tires 👍

[@RinkaiKouen]

I wonder how would you compare this is to the classic wltoys 12428... it's more of a "crawler-like basher". Similar speed and durability to the HBXs...

[@DerbyCityRC]

Unfortunately I’ve never driven one of those, but from my experience and from what I’ve heard others say, as far as durability goes, this one can’t be beat!

[@rs7781]

Greasy vid man. Looks a lot of fun. What shock oil do use on you HBX cars? Thinking of changing it on my 901a

[@DerbyCityRC]

Thanks! I actually haven’t tested yet. I believe I’m going to start with 50 weight for the 1/16 scale cars like this Pro. The 901a could probably use heavier, but that’s if you jump them like I do.

[@rs7781]

I already put some meats on for wheels because I cracked the original hubs at a skate park. 🤣 Any particular shock oil you recommend?

[@DerbyCityRC]

Nice! Not necessarily. I haven’t used it brought I have a preference. I got losi from Amazon but haven’t really been gotten to use it yet. amzn.to/3IknDwB

[@FishHardGetLucky]

Whats a good fitting aftermarket metal gear waterproof servo for this monster truck? Thanks so much!

[@DerbyCityRC]

Unfortunately I don’t know. I haven’t upgraded one yet lol

[@OliFPV]

This car is bulletproof ☝️😱💥💚 awesome fun and i got the clone from germany 🤣 Reely Ravage and i also converted it now in brushless, FPV and light all over the place 🍀 have to test it tomorrow 🤙 lg

[@DerbyCityRC]

Awesome! There are lots of clones of this car!! Glad you enjoyed, thanks for watching!

[@ToryandMatt]

Great content you provide here. Thanks. I bought some replacement lights for my pro version. I noticed you can add more lights to it. Where should I mount the second type as a modification or maybe even a third set of lights. They connect like Xmas lights do. I would send you a pic but don’t know how to do it on here. Might be a good video idea. Thanks.

[@DerbyCityRC]

Thanks!! That’s a cool idea! And something I may do eventually! Ontop of the roof or in the rear would be good places!

[@ToryandMatt]

@@DerbyCityRC Thanks. I’d love to do a bunch of under car lights. But don’t want to damage the carriage or weaken it.

[@DerbyCityRC]

@ToryandMatt ya would be best to use double stick tape for that

[@ferdinandmaier1070]

Hi Evan! Do you know where to get the input gear for the differential, because it brakes a lot. The spare part kit includes all differential gears. But i always need only the tiny input gear...

[@DerbyCityRC]

I replied to your other comment about it. Still odd as I don’t recall over breaking an input pinion on these lol!

[@CurtyWurty96]

Hey do you have a place you prefer buying from for spare parts like shocks?

[@ferdinandmaier1070]

Is it for sure that it can handle 3S? And is there such a little 3S battery with T-plug that fits in perfectly?

[@DerbyCityRC]

Yes. I have used 3s with my 16890, which uses the same esc. Only ran for maybe 10 minutes so I can’t speak to long term durability with it. The 3s battery I have does not fit in the tray. I have to strap it like I did the larger 2s in this video.

[@BangForYourBuckRc]

Man First jump with it and Mighty Max sends it! 🤩👍🏻 Wonder when we’ll see micro Max at the wheel! This HBX PRO is Legit! 😂😝 Micro Max sucker of thumbs and guardian of ramps! You guys crack me up! 💥👊🏼😊😝

[@DerbyCityRC]

Lol ya he is getting good! The jumps aren’t necessarily in order in the video, but he landed some great tricks!! I tried to get little Sammie to control a toy grade RC and he’s just not there yet. Hopefully soon! Definitely a fun car, but I certainly like the upgraded 2995 the most still!😱🤘🤘😎👍

[@_BigLife_]

That is insane. I have had some high dollar R/Cs that would not hold up to that kind of abuse. Can you find hop up parts for it?

[@DerbyCityRC]

I agree! I haven’t looked too much into hop ups, but I don’t think there’s much of that stuff available yet. Of course plenty of larger tires that fit them nicely, but this car basically is the hopped up version over the original.

[@FishHardGetLucky]

Have you had to change the servo on this rc? Mine isn’t tracking straight. If i turn right the front wheels stay right. Turn left.. Wheels stay left. If you have changed the servo.. Which one did you go with? Thanks

[@user-li5qx9nx6j]

We just bought one of these, and it has a similar issue. The wheels don't come all the way back to center when you let go of the steering control. Its really hard to drive straight because of this...

[@DerbyCityRC]

@user-li5qx9nx6j interesting. I would check for anything casing it to bind, like if the really small screws on the steering linkage are too tight. Otherwise you can reach out to the seller or manufacturer for a warranty claim.

[@DerbyCityRC]

I have not yet changed the servo, but I plan to on mine. Hoping to order one shortly and want to make sure it works well and even fits right.

[@ferdinandmaier1070]

Please check out, if it can backflip with bigger wheels or is it necessery to use 3s?

[@DerbyCityRC]

I’ll be doing larger wheels on 2s and 3s in the near future. I’m confident it will be able To backflip, I just wonder if it will have cogging issues or not. If so, the hbx 903 wheels or LC MT wheels are perfect for it 👍

[@user-zr1qd2tu8d]

You have a great KZbin page with very helpful videos. I’m interested in buying my kids and myself the HBX 16889a pro RC truck. The only version they sell on Amazon is made by Goolrc. Can you confirm they are the same truck? I’m buying your recommended ovonic 2200 batteries and will get around to putting in the 80 weight oil. All good tips.

[@DerbyCityRC]

Thanks! Correct yes this one right here is the version with just one battery since you’re also getting the Ovonic. Looks like there’s also an Amazon coupon there. amzn.to/3D8M1Ri Keep in mind that Ovonic doesn’t fit quite perfectly, but it’s still a great battery even though this video is pretty old. No failures yet!

[@user-zr1qd2tu8d]

You are the man Evan. Thanks again. I’m also building your ramps.

[@DerbyCityRC]

Awesome!! Hope you like them!

[@RaiderGriffin]

i love mine so mucch

[@DerbyCityRC]

It’s worthy of the love!

[@philiplibby4464]

Idt the front wheels left the ground 😂

[@DerbyCityRC]

🤣😂

[@lancebettisfishing]

Please help! need to buy one for my sons. 5 & 7 which do i get? and do i go brushed or brushless?

[@DerbyCityRC]

I’d go brushless every time. It’s a bit faster but you can turn the speed down on the remote until they get the hang of it. Brushless is also less likely to overheat. 👍👍

[@ryanlansigan3285]

Would you recommend 16889a Pro or the 903a that would sometimes drive on grass? Thanks!

[@DerbyCityRC]

For the grass, the 903a would probably be better since it is heavier and has bigger wheels. I have a similar car and it’s not quite as durable as the 16889a pro, but if you’re not doing crazy stuff like I do, I think it will be a great option for you!

[@kgreen175]

Just ordered this for my son, where can I get an assortment of spare parts in case something breaks?

[@DerbyCityRC]

Awesome! So there are some parts on Amazon and Banggood, but if you can’t find them there, you can also get them from pxtoysrc.com or Haiboxing-hobby.com

[@kgreen175]

@@DerbyCityRC I guess as long as it says 16889 in the description it should fit?

[@DerbyCityRC]

@kgreen175 if you got the pro version, you want it to say 16889a pro. Some of the parts are the same, but not the drivetrain or electronics.

[@philiprccars4340]

HBX 16889A Pro woes and Misery. Hallo Everyone, after A LOT of checking I finally managed to figure out why the rear drivetrain of my Brand New HBX 16889A Pro is so noisy and why the car kept veering off to the left or right regardless of how I tried to trim the steering. I do not know why it is but on this specific HBX 16889A Pro there is ZERO free movement of the dogbones inside the drive cups at the rear if the camber of the car is set up correctly so that the tyres will not wear out on the outside only. The dogbones are jammed so tightly into the cups that there is no freedom of movement inside the cup. This of course makes a loud noise so that the car sounds like a mini Nitro car instead of an electric one. I still need to figure out how to drill the drive cups out so that the dogbones can move and that the car will be controllable. Anyhow there it is why my particular HBX 16889A Pro is doing this, there is NO free play in the sideshaft setup of this HBX 16889A Pro. I even tried putting in new dogbones and drive cups but it is still doing the same, so my assessment of either the swing arms being too short or the wheel bearing hubs being manufactured incorrectly might be an accurate conclusion on why this is the problem. I trust that this information will be helpful to everyone who is struggling with the same type of issue on their HBX 16889A Pro.

[@owen8538]

To what voltage do you charge battery on these cut off an 2996a please

[@11teoy11]

I newbie please advise me. I get one and want to filled oil shock weight grease or oil for dif. for bash like you. Thank you

[@DerbyCityRC]

I use 100 wt fluid in the shocks and like it. I have not done anything to the diffs 👍

[@Kidgoku-px1zx]

Hey bud , hows the Amazon battery holding up?

[@thedeeptone1986]

Haven't had the problem of a pin coming out yet but seen a few people mention ita happened to them. What pins do I need to get incase it happens to my sons?

[@DerbyCityRC]

So typically those pins are 2mm thick by 10mm long and easy to find on Amazon and in other RC spare parts kits. But I’m pretty sure I remember this one uses a 1.5mm x 10mm which is tougher to find. I’ve ordered stock rod like this and just cut to length myself.amzn.to/41DVN9t Of course you can also just replace the whole axle : amzn.to/3ZofrUX

[@thedeeptone1986]

@@DerbyCityRC cheers for the info I think I might do the same as you and buy a length to cut down👍

[@DerbyCityRC]

It works well!!

[@beanuno4581]

What other battery do you recommend? The Ovonic 2S Lipo is sold out everywhere I look.

[@DerbyCityRC]

That stinks. These here have worked well for me too. amzn.to/3NmtXH6

[@beanuno4581]

@@DerbyCityRC thanks I really appreciate your response!

[@DerbyCityRC]

You’re welcome!

[@SGTSLACKASS]

I need the brushless motor and esc upgrade for mine I have the brushed version. It does surprisingly good but I need more speed. Having some trouble finding it.

[@DerbyCityRC]

Check Haiboxing-hobby.com and send them an email if the motor and esc are not listed 👍👍

[@oldskoolhunting]

Great video Ive just hit sub 👍😊 I’ve got the 16889a and the gps says 23mph…. What speed do you think the pro does?

[@DerbyCityRC]

Thanks!! Hard to say. Speed wise, I don’t think it’s much faster, but it has more power. I’ll be testing the speeds on them soon👍👍

[@oldskoolhunting]

@@DerbyCityRC I’ll stay tuned!! 😊👍

[@DerbyCityRC]

Awesome, thanks!!

[@Axeman31]

Hi there! Is this 3s battery ready straight from the box without changing any parts? Thank u!

[@DerbyCityRC]

Some people say yes, but I get erratic performance when I try a 3s usually. Works ok sometimes though.

[@Axeman31]

@@DerbyCityRC thank u for the reply. What 3s battery did u try?

[@oskartubekp]

It is possible that this car has problems with the cups and bearings that have a lot of clearance

[@DerbyCityRC]

I have not had issues with that yet that I recall. We are tough on this thing!

[@oskartubekp]

@@DerbyCityRC My problem is that when I hold the car with my hand and give the gas the rear wheels shake in a bestial way, I have checked everything and nothing, even the bone escapes and falls. I think it's from the cups or that the bone is short, but of course the car is new.

[@DerbyCityRC]

@oskartubekp that’s very odd and hard to know for sure. I’d reach o it to hbx via Facebook or email

[@ferdinandmaier1070]

Hi Mate! My truck (pro version) has a problem. When i turn the steering wheel half a millimeter to the left, the servo is shaking with high frequency. Which part do you think causes the problem, the radio, the esc or the servo itself?

[@DerbyCityRC]

Try reversing the steering direction with the switch on the radio, and see if turning the steering wheel in the same direction causes the shaking, or if it does it when you turn the steering to the right instead.

[@ferdinandmaier1070]

@@DerbyCityRC At the first time i tried this the shaking was after turning into the other direction. But in the meantime it is gone. But when i steer slowly (both directions) there is a strange noise (clicking/cracking) at some angles. When steering fast, everything is ok.

[@DerbyCityRC]

If the steering shake changed to the other direction, my first guess is it’s not the radio. Probably either the esc or servo. Also for the cracking sound, make sure the little black screws on the steering arm are not too tight.

[@ferdinandmaier1070]

@@DerbyCityRC Thanks

[@DerbyCityRC]

@@ferdinandmaier1070 you’re welcome!

[@sooolion9820]

Question on remotes, if we have two of these running together or at the same time, will there be any issue on controlling either of the cars? Thanks!

[@DerbyCityRC]

Nope each remote will bind specifically to one car. Just do one car with remote before doing the next car.

[@sooolion9820]

@@DerbyCityRC thanks again

[@DerbyCityRC]

You’re welcome!!

[@ferdinandmaier1070]

Hi Evan! The rear upper suspension arm has a lot of play at the upper screw. I was looking for aluminium arms. All are available except the rear upper ones. Neighter in Aluminium nor in plastik. Do you know where to get rear upper suspension arms?

[@DerbyCityRC]

I had that problem too actually. The official website is www.Haiboxing-hobby.com. If it’s not listed on there, hit the contact button and they’ll help you out. Hopefully they’re available to buy still. I know they have the rear upper arms for the 16890, but those are not as good.

[@ferdinandmaier1070]

@@DerbyCityRC Could you send me the link with the 16890-part?

[@DerbyCityRC]

rchobbies.org/HBX-RC/HBX-16890-M16009-Rear-Upper-Links-Steering-Links-Servo-Link-21560.html

[@ferdinandmaier1070]

@@DerbyCityRC Thanks. Bit this looks really different.

[@DerbyCityRC]

That’s true. It’s a very basic charger

[@Deimos000]

The ECU does accept 3S... so you know :-)

[@DerbyCityRC]

Are you hinting that you want to see that? 🤣 Don’t worry it’s gonna happen!

[@PlenumGaming]

Would you recommend having a stock of any parts in particular for these trucks?

[@DerbyCityRC]

I always recommend that. Lol An extra shock or two, Bumper and wheelie bar, 1.5mm x 10 mm axle pins And 2mm x 10mm wheel pins. Wheel hexes. That may be it. You might break more things but probably not very commonly

[@PlenumGaming]

@@DerbyCityRC Thanks! Been enjoying watching you guys jump your trucks / your editing style :)

[@DerbyCityRC]

Thanks! Really really appreciate it! 😃

[@PlenumGaming]

@@DerbyCityRC Already lost a pin! As a temp fix I cut a thick paperclip to length. Not a bad option honestly. Do you know if you can adjust the speed of reverse in these trucks? Wayyy too fast by default and adjusting the controller only adjusts the forward speed.

[@DerbyCityRC]

Ya I’ve used cut body clips as temporary pins before. I don’t believe you can program those ESCs unfortunately.

[@pootergriffin300]

definitely gonna look for a better battery and a strap

[@DerbyCityRC]

Ya I can’t remember what size, but just measure around your battery and BAM!

[@pootergriffin300]

@@DerbyCityRC thx dude

[@DerbyCityRC]

You bet!

[@Axeman31]

Got this rc for just a couple of days. Then the steering just fucked up. It wont turn either left or right. It all started during the pairing of the transmitter and the rc then i accidentally pressed the throttle. What should i do? Please help a newbie here. Thanks!

[@DerbyCityRC]

That’s interesting. Pulling the throttle during pairing shouldn’t affect the steering. Unplug battery and turn off transmitter then try again, which I’m sure you’ve already done. Make sure everything is plugged in. If the steering servo came unplugged from the receiver, be sure it’s plugged in the right way as it can plug in backwards and won’t work. Otherwise it may be a defect and they’ll likely take care of it for you. Hope that helps!

[@Axeman31]

@@DerbyCityRC thanks mate for always answering! Really appreciate it! Well ive tried all of those but the the steering wheel is still not turning. Should i just replace the servo with a new one?

[@DerbyCityRC]

You’re welcome. Well hard to say if it’s the servo. Could always be a fault in the transmitter or the receiver as well. Servo is probably the most likely and is cheap though.

[@Axeman31]

@@DerbyCityRC the throttle is fine. Rc is still running its just the wheels not turning at all

[@DerbyCityRC]

Ya could still be the steering circuit in another component like the transmitter or reciever though. L really hard to know as I’ve never had any electrical failures on these cars at all lol

[@kuyajayyoutubechannel5389]

Is brush good or brushless hbx when it comes to prices?

[@DerbyCityRC]

Brushless is almost always the way to go, unless you planned on putting your own motor system in it.

[@user-sw8lb9et5b]

Question, where do you get your parts for this car ?

[@DerbyCityRC]

Some are on Amazon, some on Banggood, and the rest of Haiboxing-hobby.com

[@user-sw8lb9et5b]

Awsome, thank you

[@travisedwards6837]

16889 just gave up on me got the pro comming.

[@DerbyCityRC]

Nice! Hard to beat the pro!

[@DannyBlocher]

Does that ovonic battery fit in the 2995?

[@DerbyCityRC]

Yes but you have to squeeze it, which I prefer not to do. This one here fits much better, you just need an adapter from xt60 to deans. amzn.to/3OTLOXU

[@owen8538]

What run time 1a battery give that comes with it

[@DerbyCityRC]

Wanna say it was around 15 minutes

[@sekefy1]

Can you please advise specs of the motor on this one?

[@DerbyCityRC]

I believe it is a 2845 3800kv. Slightly larger than the non-pro versions

[@sekefy1]

@@DerbyCityRC Does this motor come with the same ESC or larger?

[@DerbyCityRC]

Same one. 25amp