The Secret Nobody Shares and Few Know about Penetrating Fluid

[@seejanedrill]

Your dream home is just a masterclass away! Register for my free masterclass and learn how I can help you create your dream home sjdmasterclass.com

[@chauntikleer]

One additional tip: a lot of inexpensive oil cans use a lid gasket that dissolves in acetone. Either find one with a cork gasket or make your own from a sheet of cork. And if you use a brush instead, use natural bristles - synthetic might dissolve as well. Learned this one the hard way. Love your channel!

[@toddforney5198]

I've been DYI'ing for 30+ years. Leah always kicks it up a notch.

[@ScorpionRegent]

Yeah, she makes the world a better place.

[@richardhall6762]

Dear Leah, I’ve been a carpenter for 35 years + and I’ve learned so much from you. You are a pure, sure enough treasure! Heck, I just love to watch you even when I probably know what you’re talking about!

[@Kleis1]

Leah, i would appreciate comments or instructions on how to dispose of solvents appropriately. Part of using any tool is understanding how to use them and dispose of them safely. It is important to keep our projects environmentally responsible. Thanks for all you do. You rock!

[@stephenshelton4267]

I agree with others who say that you need your own TV show.

[@TechTimeWithEric]

Honestly, she has more freedom here. She can give whatever tip of the day she wants, not have some producer calling the shots.

[@paulpham9216]

The penetration fluid cartel would take her out, it better to keep this underground and spread it word by mouth, (A) you look like a genius , (B)You can send your neighbours to her videos not drawing too much attention to the penetrating fluid cartel with the slow subscription to her channel (C) what happens in fight club, stays in fight club….or this channel

[@fringestream990]

TV? Where all good content goes to die...

[@cujoedaman]

@@TechTimeWithEric I was thinking the same thing. They'd hack everything up, overwrite some script and take all the life out of whatever she does. Then she'd have to be pushing sponsors and everything else.

[@javierrosa6317]

@@cujoedaman I agree can you imagine that comprehensive video on carpenter’s pencils that SeeJaneDrill created being put on TV?

[@rickdaystar477]

I want to say rescuing old hand tools like pliars and diagonal cutters has benefits. The old hand tools I found are superior quality. Quite a bit of new stuff is as you might expect Chinese knockoffs. Save the old tools!

[@seejanedrill]

You're so right!

[@LN997-i8x]

These days nearly all my tools are old used ones for that reason. Occasionally I grab something new out of expediency and almost always regret it. Low end, high end, it's all just junk now.

[@marcnaidu5804]

@@seejanedrill Hi Jane, can we use synthetic ATF? I can’t seems to find the traditional atf. What’s the reason it has to be traditional atf and what is traditional atf anyway?

[@kungfutzu3779]

@@marcnaidu5804 i assume "traditional" is made out of petroleum

[@marcnaidu5804]

@@kungfutzu3779 ok thanks. But why must it be traditional for it to work properly?

[@handymanhoney-do6881]

That’s my go-to penetrating fluid for auto repair. One safety note--eye protection. I got a drop in my eye once. No permanent damage but I had a blur and irritation for a couple of days.

[@bob.walker351]

and maybe gloves too...

[@handymanhoney-do6881]

@@bob.walker351 acetone dissolves latex and plastic almost immediately. That’s why she puts the solution in an oil can. I’ve not found it irritating to bare skin in modest amounts--like an afternoon of driveway auto repair.

[@davidmoran4471]

@@bob.walker351 acetone is what is used in fingernail polish remover, it isn't that harsh. Nothing like the old bulk carb cleaner.

[@winifredryan8223]

The infamous keep away from kids and pets. No complaints on it being useful, just I know I have a pup that’s into everything unless he’s in his cage and then he still finds things! Good working everybody.

[@justcommenting4981]

@@handymanhoney-do6881 Noted. Thank you.

[@GordonDunbar]

As a conservationist and teacher, small tips like these can make a world of difference when shared with and practiced by many others. I share all of your videos with my family, friends and students, after all, knowledge is power. Thanks Leah, you're the best!

[@billweb]

I learned this about 20 years ago from a friend who is a diesel mechanic. I've taken apart farm machinery that decorated my property, some as old as 100 years, and this has never failed to loosen rusted parts, even thickly encrusted unrecognizable fasteners. Glad you've shared this. It will make a lot of DIYers' projects less frustrating.

[@Warrior-In-the-Garden]

You my friend are amazing! When working on projects and getting frustrated, I hear your voice in my head saying "You CAN do this". So grateful.

[@MyThirdUserAccount]

Always so helpful, professional, and friendly! Love your content, Leah

[@dallasdynasty0077]

I wish all my teachers were like her. So intelligent ,clear and calm.

[@ot9180]

No question one of the most useful DIY channels in zhe Galaxy.

[@jimb9369]

Love you Sister. Always teaching us to do better. If only the world was full of people like you.

[@shayp2815]

I've attempted many DIY projects and had mixed results. Actually, I made things worse many times. I'm so glad I came across this channel. Leah is like your favorite teacher when you were in school. Thank you for sharing your knowledge and expertise.

[@edwardanthony195]

Years ago, I watched my Dad use this on the piston tops of a seized 4 cylinder tractor motor. It blew everyone's mind that he put in the mixture, and the next day the motor turned by hand, and 6 hours later, it was running on it's own! THIS WORKS!👍👍👍

[@lindacarlson8886]

Coupling your knowledge with your delivery -- WOW. Each video is *golden.*

[@evelynmontez3565]

When you look into the camera we all are treated to your kindness. Thank you.

[@peterjamesnorcross]

Leah, You're videos are the most consistently helpful of any youtuber I'm subscribed to, and it's not even close. Thanks for doing what you do!

[@michaelochoa9282]

Just when I thought I knew a lot I find your channel and I am so amazed at what I’ve learned in just a few videos thinking, how has none of the old timers showed me this?!?! Much appreciated

[@lechatbotte.]

I use PB blaster. I love your common sense and you can do it helps. Wisdom is a much needed commodity these days.

[@eth6706]

You explain everything better than anyone I've ever seen before. Keep it up! You can do this!

[@georgeb.wolffsohn30]

My dad ( an aircraft mechanic from WW2 onward) always insisted that you tap it a fair few times to get some vibrations assisting the penetrating fluid . It always worked for him.

[@denisef1153]

I love this channel. Leah’s voice is so calming to the soul as you learn and it’s full of encouragement!! I get frazzled sometimes with DIY. Thanks Leah

[@christywerpy437]

I work in a small town hardware store in west central MN. I'll pass on your wisdom to our customers. So glad I found your channel. So informative and commonsensical! 💪👍

[@useruser400]

So like Starbuck?

[@patriciaitalia]

Pass it on, but make sure you stock acetone and ATF! You don't want to go out of business!

[@hannahjames3180]

You tell those fellas to give a good old tug on that tool!

[@johnburrows1179]

Wow. I’ve been a contractor for over 30 years. And every time I watch I learn something. Is she a great teacher or what? Her demeanor is fantastic. Thank you

[@BYOTools]

I had no idea! Love this tips Leah. Thanks so much.

[@seejanedrill]

Hey Brent...cya next week😎

[@rodshop5897]

@Click Bait Well, I've been working on old cars and machines for over 40 years now, and while I agree that the fluids do not dissolve rust (who claimed it does?) I will say that they do indeed allow parts to move easier. Does that qualify for your million dollars? I could sure use that money.

[@jamesmcinnis208]

"This tips"? It does?

[@rodshop5897]

@Click Bait I don't think that the claim of dissolving rust is inherent, and no one here has made that claim. I understand it to be the oxidation which causes the surface of the metal to move away from the substrate thereby causing contact between surfaces which are supposed to move past one another. That being the case, a lubricant applied between the surfaces would lower the force required to move the surfaces past one another. I've seen studies showing that the application of penetrating fluids have lowered the torque required to remove bolts after oxidation. Like this video: kzbin.info/www/bejne/roaooJVopKZ-jNU. Application of penetrating fluids lowered torque load over dry by measurable amounts.

[@Sandra-kv4mi]

Greatly appreciated information

[@mtcnaz]

20 years as a pro in the business and this channel still teaches me stuff constantly

[@rkeller1ify]

As a gunsmith, this solution is known as “Ed’s Red.” Works every time. I have a pipe full of it that I suspend parts in that need to be genially conserved. it will remove any bluing and it is seriously degrading to wood. But for seized steel parts or bolts it is fantastic.

[@evelynmontez3565]

You have no idea how you've helped me. EVERYTHING I need to do I hear your voice "You can DO THIS!" Normally I start saying "I can't do this" but that phrase is now history. Thank you, Leah.😍

[@rusmaster200]

who knew! Leah, you need your own TV show! EVERY video teaches me something.

[@debhalverson3956]

I prefer our Leah on KZbin, just because I'm afraid having a television (network) show would reduce her freedom. I simply don't want to see yet another "script for the show" show with this diamond of knowledge, so well and wonderfully explained. Dare I say, I don't want Leah to be diluted?

[@rusmaster200]

@@debhalverson3956 you have one hell of a point there.

[@debhalverson3956]

@@rusmaster200 Thank you. I was concerned I would be a bit too "out there" with my concerns.

[@ScorpionRegent]

@@debhalverson3956 No, your points are solid. Here Leah is her own person. Once you sell out, you don't have control. Felicia Day proved you can be successful on your own terms if you work like the devil, never give up and sweat the details. From what I can tell Leah is doing the same thing. That is the subtle hidden lesson in her channel.

[@richardhall6762]

Absolutely!

[@TheBHoky]

Thank you Leah. I have been a machinist starting in 1987. and this ls a Life changer. I use my skills to repair Farm equipment in my community and after trying this all I can say is WOW. It has saved me from drilling out many bolts and that means more profit on my side jobs.

[@bocan3189]

Hi Leah, What a great tip, I'm making my own from now on. Also, I could listen to you for hours, I love your tone Ma'am, you can soothe all my DIY mistakes, "learning events" away. Keep up the great work.

[@debhalverson3956]

I hope it's ok if I steal your "learning events" phrase! How apt, but still fine for general audiences!

[@lunchbox9864]

This continues to be one of the most helpful channels on all of YT.

[@karen-gq4zd]

I have a pair that's seized, now I can fix them. Loving your vids, thank you!

[@stevensmith2228]

Great tip. Works amazing. I have tried just about every penetrating oil on the market when I was in the automotive industry. This is better than all of them. Period.

[@LA6NPA]

This is awesome! Just keep it away from certain plastics, like acrylics! The acetone just eats through it! Metal cup is wise. Also, this is super flammable, akin to napalm or a molotov cocktai, so no smoking or open flames!

[@shericreates]

Good to know. I inherited buckets and boxes of tools! Probably 4 generations worth. First I was going to do was clean them up. This will greatly help. Thank you!

[@walterbordett2023]

Vibration and percussion (hammer taps) aid the penetration of the magic elixir. Patience is a virtue here. Long soaking and repeated vibration may bring success when one quick application does not work.

[@seejanedrill]

For what?

[@walterbordett2023]

@@seejanedrill Sorry I was unclear. I meant that often penetrating fluid takes a while to work its way into the corrosion freezing the parts in place. Classic example is a nut corroded in place on a rusty bolt. Time, repeated application of fluid and tapping or vibration can result in eventual success removing the nut, where a quick squirt of fluid does not help.

[@garryt6356]

Every video, Every time I realize why Leah is the best on KZbin for DIY information and tips! Thanks Leah!

[@ramblin660]

Thank you for the video! There's actually been times I've made a 30 mile round trip into town to get penetrating oil, when I had ATF and Acetone sitting on the shelf in my garage.

[@ScorpionRegent]

The more painful the learning experience the more likely the lesson will take.

[@FALCON-nb8nq]

Why I am not surprised that this video was going to be very useful information, as usual. All your video presentations are awesome. Not only because of the information provided but because of the way you present it.

[@deliveryguy7402]

Leah, you are awesome! I'm so glad you're back with more tips and tricks, like this one. My boss is forever getting me to buy that commercial pen fluid, but now I'm gonna keep this stuff around the shop. Thanks again!

[@KarkofNorheim]

I've been trying to figure out who you remind me of, and I think I've finally realized, you are like the "Mr. Rogers" of DIY. Well spoken, calm, and reassuring. "You've got this, believe in yourself."

[@gr8ride411]

Love your channel Leah. You instill confidence and skill in anyone who watches and listens. Thank you!!!👍🏽

[@JjJj-bq7le]

you are one of the most under estimated channels around you always teach old dogs like me a new trick or two

[@FishOnIsMyHandle]

Great tip, it absolutely does works. Last winter, this was the ONLY thing which worked for me on a seized bearing/hub

[@seejanedrill]

Yep! The stuff is MAGIC!

[@robertholden8956]

What a superstar this lady is. Should be on mainstream TV.

[@mikes4357]

My father gave me a pair of pliers that look exactly like those 35 years ago when I was moving out of the house part of my starter tool kit they were old when he gave them to me, it’s stamped on the side made in west Germany in addition to them being sentimental they are literally the best Quality pliers I own including some new knipex.

[@jdbacon1366]

Best DIY channel on the internet.

[@useruser400]

Great tip! Looks like a much cheaper option than the commercial products. But it would have been nice to see a scientific side-by-side comparison with several different solvent options. Maybe the Project Farm channel can set that up. Your channel is AWESOME. I have learned so many great skills from you!

[@sirtarin]

Project Farm has done two or three videos comparing penetrating fluids, including this mixture (I actually requested that he do this mixture). If I recall correctly, this helps some, but there are several penetrating fluids that do work better. But they certainly aren't cheaper. :)

[@kishka7]

Thanks Lea! I've been a handyman for thirty years (former mechanical engineer) - great new piece of info! I will definitely try it!

[@toddweller]

What an awesome tip! I would say the acetone will evaporate over time so store it in an airtight container.

[@Maxid1]

And mix very small use purpose amounts.

[@jamesmocharski4803]

You, my dear Leah, are a national treasure! Keep doing what you do!

[@Anonymous-it5jw]

Thanks for the tips about its effectiveness. giving it time to work, and about using non-synthetic ATF. Sometimes its best to keep the mixture in a sealed glass jar until you need to load up the oil can - Acetone will evaporate pretty quickly from unsealed containers. Keep the tips coming, Leah. You have a lot of practical advice to share with your viewers.

[@ttttenney]

Leah, you are absolutely one of my favorite KZbinrs. Thanks, for all the great videos!

[@catwoman662]

Luv u Jane. You tips have made my landlord life soooo much easier! Hugs.

[@yomama9191]

When I first seen your video on a tick stick a while ago I wanted to dismiss you bc I thought, "what does she know?" I later found myself asking "what do I even know?" And remembered that anyone can be a teacher as long as you are a good pupil. Now, I know what i know, and I know there's things I don't know. Ms. Jane, thank you for indirectly teaching me about my own bias and filling me, and others, in on what we may not know yet.

[@TheIAmOmegaRed]

You always have the best tricks. Thanks so much for all your great videos!

[@ratdog3055]

First video from Leah that I can say "Yea, I do this"! Thanks Leah. A lot of times I will put a badly rusted tool in a pan and cover it. let it sit for a few hours and never had it not work yet!

[@Michael-Makes-Stuff]

Awesome video, Leah! 😍 You should change the name of your channel to “See Jane Blow Your Mind.” 🤯 Your content is the BEST! Greetings to you from my 8-year-old daughter and me in Minnesota. 👋🏼

[@seejanedrill]

Say hi to your daughter for me.

[@georgeb.wolffsohn30]

@@seejanedrill I'll bet she has her own tools.

[@abrumarci]

Hi, Leah! I wish all youtubers and vloggers out there were just as clear and fun to follow as you are. I just learned something new. Thank you!

[@Goodsnout]

I'm skeptical. I am aware that ATF and acetone is a well known and widely touted homemade penetrating oil but the two definitely aren't miscible. Even with violent shaking they separate almost instantly. I decided there must be a better formula. What I came up with is 50% ATF and 50% charcoal lighter fluid. What's in charcoal lighter fluid you may ask? Well it's 3/4th descented kerosene and 1/4th petroleum naphtha (white gas). The two fluids mix well and stay mixed. This has worked better for me than ATF and acetone with no need to shake.

[@fastbusiness]

Thanks for that. I use the ATF and acetone and it works well, but has the problem you mention. Also, if it is stored in container that isn't tightly sealed, it evaporates and you are left with only ATF. I'm going to try the mix you showed here. Now if I could just find a pump oil can that works right and won't leak.

[@sandstorm6605]

Couldn’t you just add dish soap to the original recipe to act as an emulsifier?

[@sandstorm6605]

@@fastbusiness That’s true. I don’t think it will either. Unfortunately I don’t have the ingredients handy or I’d give it a go. All if it, her recipe and the above, is always good stuff to know. As they say, “The more you know, the less you need.” Thank you for the reply.

[@sandstorm6605]

@@fastbusiness Very interesting! Thanks for sharing your findings.

[@fastbusiness]

@@sandstorm6605 The 50/50 ATF and charcoal lighter fluid mixes the best so far. There is no visible separation since I mixed it 12 hours ago. I'm going to start using this mix and eliminate the acetone. Variations of this mixture is used to create a firearms cleaning solvent/lube called "Ed's Red" that I have used for years and works well. The original mixture was: Kerosene, Mineral Spirits, ATF, Acetone (equal parts). There is a variation used for gun lube consisting of Mobil 1 Oil, Kerosene, ATF that works well.

[@davidsawyer1599]

Great info. Pro Tip. When purchasing new pliers or cutters that are not. Are not the slip joint type. Soak in water over night. ????? The next day remove the tool and vigorously work them open and closed. All the while wiping away the rust. Then apply Leah's concoction and again work vigorously. The tool will now move freely and the new tool stiffness will be gone.

[@aevans3977]

I absolutely love you Leah - you're amazing!

[@kb9drh]

Nice job! I've been using this for years in the shop and it works very well. One suggestion be careful with bare hands with the transmission fluid. Just use rubber gloves or clean the handles off before you use the tool. Great video! Thanks

[@excavatoree]

I did the same thing with an expensive pair of crimping pliers that were "locked up" tight. I didn't even use any acetone, I just used transmission fluid and they freed right up. (It probably would have been quicker with some acetone to let it penetrate faster)

[@ciphercode2298]

An old mechanic I knew as a child ( almost 50 years ago) was working on an old truck with a seized motor. Itd sat for years in a field. He opened the hood and poured atf fluid down the carburetor and it sat for a couple days. He then hand cranked it several times. It was then able to crank on it's own. After it ran for a couple of minutes he added a quart of kerosene and let it run for a while. He then changed the oil and gave it a tuneup. It was as good as new and ran for many more years.

[@michaelpaquette]

This was an awesome episode. Jane really tries hard to bring this channel great value. Non wonder you have so many subscribers. My neighbour just showed this to me recently and it worked like charm on a really stubborn choke lever on my dirt bike that was stuck closed.

[@ScorpionRegent]

Michael Paquette - TPHS class of 80?

[@Mdub_actual]

You feel like family, in the way you share knowledge and describe things. I love this channel! Thank you!

[@NickVenture1]

Thank you. Must use this next time.

[@micperez819]

Leah is awesome. Her voice is so pleasant to listen to

[@javiergalvan242]

Great tip Leah, that never crossed my mind! Great video, remain blessed and keep those awesome video's coming! 💯👍☝🙏

[@Seriouslydave]

I also save my old motor oil for this reason. And at the end of the mowing season i paint some on the mower deck to stop it rusting, or old deisel.

[@GoodlyEarth]

I had no idea you could make your own. Thank you Leah for the amazing tip!

[@seejanedrill]

Howdy Mitch

[@heliarche]

This is indeed an old mechanic/farmers remedy for frozen/rusted things and it works as good if not better than anything else on the market and SO much cheaper! I used this on a 1949 Ford Flathead V-8. I made a gallon or so and applied it every day for a few weeks. This thing was nothing but rust. You'll still need patience, especially in my case. It's not magic but I got all the cylinder head bolts and intake manifold bolts out of the engine. On these engines, a lot of people snap bolts and have to go to a machine shop or they try drill out the bolts and snap drill bits. Once you break off a drill bit, you're done for. This absolutely works great, it's very inexpensive. Just remember with your fasteners to be very patient. Once you get it to crack a tiny bit, go back and forth back and forth, back and forth. It's going to take you a while but it's a lot faster than snapping bolts off in an engine block or cylinder head. If you can, apply it a few days before you have to actually do the work. It's cheap enough that you can slobber it all over the place. Just try to keep it away from seals or other plastic and hoses that you want to keep. The acetone might attack such things as radiator hoses and seals, rubber mounts and plastic. Use discretion but this stuff is good!

[@ginaalwaysavip1177]

Your awesome I never heard of this! Thanks so much for sharing with us all!

[@langstrum2421]

Hi Leah. You have no idea how important you are to me. I always watch your videos even though I don't understand everything you say... but I'm learning a lot of English with you. Thanks for all the tricks you show us. Take care of yourself. Greetings from Murcia, Spain

[@JM-vj7we]

Thanks….. will try it! I have a faucet I just can’t screw off completely. Thank You ❤️

[@jakesarms8996]

I made this brew and it worked ! I had several pairs of wire cutters , plyers and even garden shears that are now working perfectly.

[@hermitgirlwanders9162]

Thanks for the confidence building!

[@jasondandria1979]

I could listen to her all day

[@suzisaintjames]

Fun fact: acetone dissolves plastic, so don't use a plastic jar to mix up your solution or you'll have a big mess to clean up! 💖🌞🌵😷 P.s. there's acetone in some fingernail polish removers, but there are some acetone-free polish removers too. So read your labels.

[@pamelah6431]

My acetone nailpolish remover is in the plastic container they all come in. For like 10 years. 🤔

[@suzisaintjames]

@@pamelah6431, you're right! My bottle is so old it doesn't have a recycling code on it! But it does say harmful to plastics. And my dad used to solvent weld plexiglass together with acetone. So I'm guessing not all plastics are alike. Kinda like gasoline cans are made of plastic, but don't try putting gasoline in a plastic milk jug. 💖🌞🌵😷

[@pamelah6431]

@@suzisaintjames interesting. Thanks.

[@luistrevino6229]

Hi Leah !!! Because of you and your channel, I have accomplished so many things. Thank you for sharing your knowledge, tips, and wisdom. Love and peace from Texas

[@BronzedTube]

Always love your videos and great news, my wife always has lots of acetone for removing stuff off her finger nails. Cool tip, I can't wait to try it. I may actually go and buy or acquire seized tools to try it on for fun.

[@debhalverson3956]

Half the fun of old tools is getting them working again. More fun than one person should have alone!

[@corvideclectica6931]

As often as not here's a perfect video about a week prior to my needs. It's almost as if Leah has a copy of my to-do list .....you don't have a copy of my list, do you? Seriously; four days before I needed this tip and here it is. Thank you again.

[@SnakeAndTurtleQigong]

The Bob Ross of DIY, with much cooler hair! 💙🔨👍🏻

[@sirmi9868]

No one,i mean no one hasa more cooler hair than bob even tho i love Leah

[@danielhunter5]

Hi Leah, I had occasion to try out this concoction on a seized collet on a router bit. I sprayed it liberally onto the collet and 1/4" shank of the bit. I left it overnight and returned to it the next morning. The collet came off of the shank with very little mechanical help. This works well. I have since passed on this information to others. Thank you!

[@LightBeing369]

I'm a new subscriber and I really enjoy your informative videos. Thanks for sharing these useful tips😊

[@kutzbill]

My Uncle was a Blacksmith. He would have people that would bring rusted tools to him, and he would heat them up on the forge, to just below tempering temperature and put them down in an old barrel of Graphite grease. It was messy, but it always worked. Smiles!

[@loripatterson7882]

Great to see You again!!

[@franchise15104]

Safety first. Wear rubber gloves so your skin doesn’t absorb the chemicals. Thanks Leah I’ve learned so much from you. Looking forward to seeing your videos

[@kman-mi7su]

Well, I just learned something new, I have acetone and transmission fluid at home. I will mix this up and use it in the future. I've been getting ripped off all these years! LOL! Also, if you have an abundance of unused transmission fluid leftover from fluid changes and you own a diesel pickup, SOME trucks can actually burn it. It is good for the cleaning the fuel injectors and pump. I run it periodically as a mix with the diesel fuel in the tank of my 1988 Ford F250 and it does a better job than the shelf products.

[@seejanedrill]

Thanks for sharing that info

[@JPGtampa]

Check for metal shavings and contaminants tho. You don’t want those going into your injectors…but hopefully your fuel filter would catch it.

[@kman-mi7su]

@@JPGtampa Use NEW transmission fluid. I never put used stuff in it.

[@JPGtampa]

@@kman-mi7su Ok, good! At first, I read your comment as "an abundance of used transmission fluid"... You had me worried 😅

[@MrBilld75]

This is exactly what that expensive penetrating fluid "Kroil" actually is, ATF or hydraulic fluid and a solvent in a spray can and it's the best there is in terms of penetrating oil. But you can easily make this exact same DIY version yourself. In head to head showdowns, the two winners are always Kroil and ATF and Acetone mix and if the homemade ATF and Acetone are not included, then Kroil always wins. So even the pro penetrating oil companies know this works. I use it all the time now, because it is superior to any penetrating oil on the market and so, so cheap to make. Just be aware that once the two separate, the acetone will evaporate off if it sits a while and you'll have to add more acetone to the mix. So only make as much as you need for any application.

[@squirrelcovers6340]

Been using this since I was a teenager. My mechanic told me about it. Quite a money saver.

[@andoniades]

Thanks for the vid! Back in the Navy, we couldn't use penetrating fluid on board. One trick we used was to try to tighten the bolt a bit more. Counterintuitive. ...but it served to free up the seized threads. Then, loosen using steady pressure. It takes practice, but once you get a "feel" for it, it works in most cases. This technique is good if your in a bind with no fluid.

[@ItsAsparageese]

This is brilliant, I'm kinda amazed I'd never thought to try it. Thanks for this!

[@404notfound.....]

I still employ that technique from time to time! 👍

[@arnokilianski7889]

Ever try using diesel fuel?

[@TonyaO2L]

It works. Wiggle it!

[@andoniades]

@@arnokilianski7889 I have. Using a little diesel is an old-school legit technique too

[@denisem5437]

Leah, I can always find the perfect home video in your collection. Thank you for being so informative. Love love this video as I do all of them.

[@404notfound.....]

I'm willing to bet this is acetone and transmission fluid but here in the industrial shop we use kroil. it breaks apart everything. Good video Leah

[@squirrelcovers6340]

Check out comparison videos on Project Farm. Kroll is the most expensive and the absolute LAST in effectiveness and rust inhibition.

[@404notfound.....]

@@squirrelcovers6340 What is Kroll?

[@cdsmit27]

@@404notfound..... its called Kroil. It's a brand of penatrant oils.

[@404notfound.....]

@@cdsmit27 I know how to spell kroil, I'm pretty sure you're referring to squirrel covers post. lol

[@daveb9211]

I just tried this on rusty exhaust manifold bolts. Worked like a charm! Can't thank you enough!!!

[@judysbakeryandtestkitchen1654]

Great! Many women have acetone - it has its nail polish remover! Sure don’t have that other stuff for the automatic transmission.

[@ItsAsparageese]

Nail polish remover usually has a fairly low amount of acetone in it, plus I wouldn't want to mess around with other ingredients that could potentially react in unexpected ways with the other ingredients. I'd recommend just picking up a can of the pure stuff! It's quite cheap and very good for all sorts of solvent purposes. I used to clean oil paint brushes with it, left them looking silky clean like new after barely a dip and bit of rubbing!

[@judysbakeryandtestkitchen1654]

@@ItsAsparageese Thank you ever so much