I love when companies market to "metal heads" "This pedal is called The unicorn stomper. It's settings are Stabbed in the neck with a rust screwdriver, it goes from 1 tetanus to 10 death from infection. Then we have bludgeoned with a cat, this goes from 1 fractured skull to 10 total decapitation." Awesome video, That fuzz pedal you made sounds fantastic.
@Layka-be3bz Жыл бұрын
I’ve been using guitar pedals for decades and this is the first time I really understood what was going on. Using a sine wave with the oscilloscope was perfect. I came here expecting no a few tips for using guitar pedals with synths, but you provided that, plus the best explanation of these pedals I have ever seen.
@JorbLovesGear Жыл бұрын
High praise, cheers 🙏🙏
@NunyaB1s2 жыл бұрын
@15:00 I don't really care that you got lost here. It's soooooo awesome to hear someone else just play around.
@JorbLovesGear2 жыл бұрын
Cheers, normally I cut them because they don't sound that good. Lol, but when I find a good riff it gets to live on.
@CasfraTTMАй бұрын
@@JorbLovesGear A bit late on the vid but the full jam sounded straight out from some paul birken track :p just loved it !
@coolguy27832 жыл бұрын
14:46 sounded so damn awesome, that kick drum was sick
@JorbLovesGear2 жыл бұрын
Cheers, normally I cut out the clips where I go on for too long. lol
@wilsonjaksetic60092 жыл бұрын
I was literally just on a pedal/synth video binge, thank you so much for extending it with what I’m sure is awesome content. Keep up the great work man!!!
@JorbLovesGear2 жыл бұрын
Cheers thanks! I really love this series, pedals are so exciting for me
@syntheffects Жыл бұрын
Synths and distortions work wonderfully together. I try to try out as many pairings as I can on my channel but some like the OCD and D+ are just unbeatable classics.
@DrClocktopus12 жыл бұрын
A Moog grandmother (or presumably other monosynth) into an ultra fuzz is one of the sweetest sounds
@LeonTodd2 жыл бұрын
Big Muff on synth - what a legend!
@JorbLovesGear2 жыл бұрын
😅Get loud or go home, what can I say.
@briannolan2 жыл бұрын
Kudos on the teaching chops Jorb! I've watched a lot of guitar gear videos, but I think this is the first time that I have properly *understood* the soft clipping / hard clipping differentiation.
@JorbLovesGear2 жыл бұрын
🙏🙏 That's really high praise, thanks. I'm proud of it!
@positivepig11 ай бұрын
the fact that you brought up slingshot dakota = instant subscribe!
@JorbLovesGear11 ай бұрын
ayyy cheers, hell yeah
@huntergalloway39442 жыл бұрын
Big MUFFFFFFFFFF! It’s always a challenge to use with stereo synths. Great work!
@JorbLovesGear2 жыл бұрын
I have written down an advanced signal routing episode, but I need to come up with more good topics for it...but stuff like that is 100% in the cards
@Ve55el2 жыл бұрын
Thank you for the Slingshot Dakota suggestion! That band is amazeballs! ...and your channel content is amazing too!
@JorbLovesGear2 жыл бұрын
Ahh hell yeah, cheers
@jakeage3024 Жыл бұрын
Slingshot Dakota rules! I first saw them in a backyard in Gainesville, Florida on a Sunday morning.
@stopmikeandjim31962 жыл бұрын
This is so useful. I'm a guitarist with an electrical engineering background who is just getting into synths. I can't thank you enough for putting up the oscilloscope while you explained everything. Subscribing
@JorbLovesGear2 жыл бұрын
Ahhh perfect, happy to help!
@loissio4812 жыл бұрын
As a guitar/bass player that got interested on synths and producing recently I really loved this video and the ideas that you gave me to try out new things on gear I already have. Saudos e unha aperta dende Vigo, Galicia!
@JorbLovesGear2 жыл бұрын
Cheers, nice to hear that. A tale as old as time, the guitar to synth pipeline is real. Lol. Hello from Iowa, the sunny midwest US.
@theinnermostsanctum2 жыл бұрын
This is my jam. I was just wondering if i needed s Fuzz and Overdrive to go with my Heavy Distortion for my synth. This answered that...beautifully. Thanks.
@HOLLASOUNDS2 жыл бұрын
I have a Flanger pedal to use on sythersizors but I dont have the wire.
@JorbLovesGear2 жыл бұрын
Cheers, glad it was useful!
@misha_myk5 ай бұрын
That was an absolutely amazing video. Basically, it summed up and concluded all of my thoughts on different kinds of drive pedals and their usage, sound, and character in a quite universal demo with a pure sine wave
@dijjidog2 жыл бұрын
Great video, love to see the lead 2 out again
@JorbLovesGear2 жыл бұрын
Oh yeah, it was a perfect fit, clean and stable
@STMRecords18 ай бұрын
Great series of videos, love how you break this all down.
@JorbLovesGear8 ай бұрын
cheers, thanks for that
@orka2682 жыл бұрын
Drive My Pedal - 2022 Oscar Nominee
@JoeMcGuire2 жыл бұрын
Great video! So happy to see you have a Patreon going now! From my own experience, the green russian has better performance on the lower registers though I don't have one of the big box muff versions to test against, and the Boss DS-1 is the best thing ever on the OG DrumBrute.
@JorbLovesGear2 жыл бұрын
Cheers, appreciate hearing that. It is a weird step! You're right, the bass big muff is just the green russian, I should've mentioned. SO many little differences!
@jramosmusic2 жыл бұрын
I have my coffee ready for this one. Loving this videos.
@JorbLovesGear2 жыл бұрын
Buckle up, its dense. Lol
@sashajedinac93912 жыл бұрын
Super useful video. Thank you so much for making this.
@JorbLovesGear2 жыл бұрын
🙏🙏 Cheers, thank you. The series has been some of my favorite videos to work on, I love pedals so much
@theartofcarny2 жыл бұрын
Very happy I found this channel!
@JorbLovesGear2 жыл бұрын
Cheers, I'm glad you found it too! lol
@chikoavena34072 жыл бұрын
Your blues driver pedal is so clean haha, I've seen beated up ones quite alot lately
@JorbLovesGear2 жыл бұрын
I need to toss it around with some rocks a bit
@daneguitarist12 жыл бұрын
Jorb you gotta join this collab project, basically an ambient collab album with a bunch of synthers
@JorbLovesGear2 жыл бұрын
Email me about it!
@billtrieshmann5979 Жыл бұрын
A great drive pedal for electronic music is the Boss Bass Overdrive ODB-3. It can do low, mid and high gain sounds while including separate eq control for high/low freq while also incorporating a blend control. Sounds exquisite on synths, drums and whatever else you can think of. Typically about $50 used
@leftovernoise9 ай бұрын
Actually that's a really good fuckin call. Getting one asap.
@chefhumpty61268 ай бұрын
Man I have one and why the hell have I not used it in synths (I’m a bassist)
@snrrlax6 ай бұрын
I'm appreciating these videos. I use a ton of vst synths and am jumping into my first hardware synth (Modal Cobalt 5S) and also play bass. Digging this series to see what I can try to make use of from what I might already have.
@shpongled5872 жыл бұрын
Reasonable amounts of the right kind of distortion can add proper harmonics to a lot of sounds indeed.
@martimdesouzajunior75852 жыл бұрын
Nice jam starting at 1345. Crazy cool sounds!
@JorbLovesGear2 жыл бұрын
🙏🙏🙏
@gamepad3173 Жыл бұрын
This would be a great way to test pedals while building a pedal board.
@Rollur12342 жыл бұрын
I didn't mute the fx knob on the fx pedal return channel. That did the trick. However there is clipping on certain level on the main out. Thanks for the show! Greetings
@emmettthenry2 жыл бұрын
The overdriven piano sound instantly reminded me of Benevento/Russo Duo’s “Play Pause Stop” album. Totally forgot about it for years. Thanks.
@Death_By_Media2 жыл бұрын
A little art patch bay and two used Zoom MS50g’s for less than a $100 was one of the smartest purchases I feel I’ve ever made in music gear and my synths seam just as happy about it . Otherwise my now old PodFarm 2.5 plug-in gets the job done , but I wouldn’t say no to a well priced Geiger Counter .
@JorbLovesGear2 жыл бұрын
I'm trying to snatch one of the ms70CDR's for an episode on multi effects, I think
@Death_By_Media2 жыл бұрын
@@JorbLovesGear You should it’s a great “ poor man’s “ H9 . Btw coincidence I was literally just watching your monologue video and commenting when you commented on this one lol
@michaelhoman77482 жыл бұрын
Ames Iowa represent!
@isaac.anthony5 ай бұрын
I bought the Elektron Drive pedal on sale for $99. i wish i bought 2 for that price. Multiple good algo with eq and gain stage, so good!
@mrblablablabla Жыл бұрын
Great video, I love the visual translation with the oscillator! However, I’d add the caveat to be careful with running line level into drives, especially fuzzes with sensitive transistors. You could actually damage a pedal by running too strong a signal into it.
@iancain66472 жыл бұрын
Bro there has to be a synth dictionary. I love learning these words you use!
@JorbLovesGear2 жыл бұрын
🙏🙏 I'm breaking the useless adjective mold, only accurate descriptors around here.
@SacSynths_Jack_Z2 жыл бұрын
Really enjoying this series! I think the technical explanations with the oscilloscope visual is super helpful. Did you film the pedal build?
@JorbLovesGear2 жыл бұрын
Thanks Jack! Not really, I move around so much when I do repairs or builds, between tasks & around the house that its such a pain to keep track of when I'm recording or not, if things are in focus etc. Plus, me digging through a bin of resistors for something close enough to work isn't really worth sharing...lol!
@lfoflow2 жыл бұрын
Love the ss/bs mini! Use it on bass and synth all the time
@JorbLovesGear2 жыл бұрын
Really rips with bass, what a great pedal
@davidhrivnak2 жыл бұрын
This is such a great demonstration and explanation! Bright blue LEDs like the one on that DOD are so outrageous, and I'm glad you slapped some tape on it. A trick I use to get bright LEDs under control is putting a drop of Elmer's wood glue on it, letting it dry, and then putting another drop on if it needs it. It works like a charm, and you can easily and cleanly peel the glue off with tweezers if you decide you don't like it. :-)
@scramblesthedeathdealer Жыл бұрын
I want my gear lit up like an airport.
@sideburnsmcawesome2 жыл бұрын
Shout out to @Slingshot Dakota! Doing the Valley proud!
@JorbLovesGear2 жыл бұрын
Rad band
@semyonboyk02 жыл бұрын
What a beautiful synth nerd
@JorbLovesGear2 жыл бұрын
Bruh 😅🙏
@REFabbro2 жыл бұрын
thanks for the great content
@JorbLovesGear2 жыл бұрын
Happy to do it, I really am enjoying this series
@SixteenVoice2 жыл бұрын
A couple of times I caught myself singing "bravissimo, hip hip hooray". Not sure if that was a coincidence 😏
@JorbLovesGear2 жыл бұрын
Must have been! Lol
@ciatangallaghe2485 Жыл бұрын
That oscillocope is dead handy.
@JorbLovesGear Жыл бұрын
Changed my shit honestly
@AT-eh2eo2 жыл бұрын
Spitty was a very good word
@JorbLovesGear2 жыл бұрын
🙏🙏Only good descriptors around here, what can I say
@jackodonnell34632 жыл бұрын
Love this, thank you
@lamapotato2 жыл бұрын
I'd love a video on drum distortion with pedals 🙏🙏🙏
@JorbLovesGear2 жыл бұрын
a drum machine special is in the backlog for the pedal guide!
@lamapotato2 жыл бұрын
@@JorbLovesGear I've looked all over KZbin and it's hard to find good videos on it. Elektron's analog heat sounds promising to me because it doesn't ruin the low end.
@davidgoode74162 жыл бұрын
Awesome!
@josephwright59219 ай бұрын
I am still waiting for anyone to post a video showing the VOX VALVE ENERGY pedal series on a synth.
@luserdroog Жыл бұрын
I've heard it said that overdrive is just a form of compression. So you could consider a compressor to be an even-lighter overdrive.
@mchamerhead Жыл бұрын
super
@shermanchow42642 жыл бұрын
Good stuff. I don't think there are many videos that show the combination of the bd-2 and synths. I may have to pick one or two up. Speaking of which, when using drive pedals do you find it unnecessary to go stereo? Or do you have one channel going into one drive pedal and another channel going into a different drive pedal? Just asking because stereo drives are few on the market.
@JorbLovesGear2 жыл бұрын
No joke, I've considered modding two blues drivers into one box to use as a stereo pedal. I actually had written in the outline to bring up the EHX operation overlord, as a stereo drive pedal but didnt really rely on the outline much for this one. Because you're right, there aren't many. Eventually I plan on doing an advanced signal routing episode, with dry blends, effects sends, and other things to get around combining signals like that
@shermanchow42642 жыл бұрын
@@JorbLovesGear I haven't experimented enough, but at some high level of drive my ears can't hear much distinction with stereo modulation added to the signal. I may have to try a wet/dry rig, but maybe that's thinking too much like a guitarist?
@Chris-vr8cd2 жыл бұрын
you could use this for LFOs too
@Anamnesia2 жыл бұрын
You mentioned *_Soft Clipping_* & attempted to give a demonstration of what it is, but maybe it's just me, but that's not my understanding. Perhaps I heard "soft clipping" & you were demonstrating something else??? My understanding of Soft Clipping is; As the Input Gain approaches the maximum input value, instead of allowing the waveform to produce a Square Wave (or at least square wave transients), the *_Soft Clipping_* feature _rolls over_ those Square Waves, so they become "Less Sharp" and "More Curved". My understanding is that; 'Soft Clipping' is more akin to a Compressor/Limiter, than it is to do with an Overdrive/Distortion Pedal...
@JorbLovesGear2 жыл бұрын
I'm not really following your initial understanding, but let me try and get there. My example around 6 minutes was with a sine wave, as it gets pushed past the headroom of the blues driver, a soft clipping pedal, it changes into something different, less smooth, and more distorted. Were I to do that same thing with a square wave, it would also distort at any levels beyond the headroom, & it wouldn't necessarily be a clean, all right-angles square anymore, it may become asymmetrical, etc but would certainly distort. All that to say, the connection to compressors is a little bit tricky, headroom has some different context. Compressors (generally) aren't designed to distort your signal when you go past the headroom, they just bring your level back down. That may color the sound, depending on the circuit, but the intention isn't to clip. If course, some compressors can be driven to distort, but in talking about broad, how these effects work, it's not quite soft clipping, because the signal isn't quite distorting.
@Anamnesia2 жыл бұрын
@@JorbLovesGear Seeing as your video speaks to the process of altering sound, then I shouldn't have attempted to challenge your description on a subject I know very little about. However, in my defence; there appears to be *_two_* definitions for the term, "Soft Clipping" - there's yours as it relates to signal modifiers (to add harmonics) & there's a second which relates to protection circuits in Amplifiers. It's this second example which I'm more familiar with. If you search KZbin for, "NAD 3130 soft clipping on the scope", it gives an example of the Compressor/Limiter type of "Soft Clipping" which was my understanding of the term (as it relates to Amplifiers). Again, apologies for my misunderstanding.
@portcorner_noise Жыл бұрын
I really love your content mate, well done! One question for you... I am getting some pedals from a friend who's selling a load and want to insert them in my signal flow. I have a minilogue xd, an audio interface and Ableton... I produce ambient music, no guitars, no vocals... if I want to use the pedals as inserts and be able to effect my master bus do I need a reamp box like the Radial extc? many thanks!
@JorbLovesGear Жыл бұрын
You don't *need* a reamp box, but it will make for a cleaner / less jank set up. I hardly know anything about working with a daw though, depending on your hardware you've got options
@portcorner_noise Жыл бұрын
@@JorbLovesGear what do you mean the ramp will make for a cleaner/less jank setup?
@JorbLovesGear Жыл бұрын
@@portcorner_noise just aux send out, into a pedal then pedal out into the interface, level matching could be a pain, getting noise or hum where you don't want it is possible... A lot of it depends on your specific gear
@portcorner_noise Жыл бұрын
@@JorbLovesGear sure, understood! thanks a lot.
@TaranGray5 ай бұрын
what's that oscilloscope meter you have? it's awesome
@tracyharms35484 күн бұрын
I made such newbie mistakes as I got into synth gear. After buying my first boutique analog synth I bought a boutique fuzz pedal to enhance it. Far too expensive, far too many features, and I didn’t understand the importance of either impedance or envelope. So underwhelming, I sent it to the manufacturer to see if it was working properly!
@lee_at_sea2 жыл бұрын
FuzzFaces need a "pickup simulator" transformer to behave properly with high-impedence devices. Drop one before it in a setup like this and it comes alive with 10x the dynamic range.
@kujumz806 Жыл бұрын
got an example? id take a link. thanks in advance
@RegebroRepairs2 жыл бұрын
That is NOT the shape I expected, as they talk about clipping, and that blues driver is not clipping... it's doing something else.
@JorbLovesGear2 жыл бұрын
Soft clipping, indeed
@RaquelFoster Жыл бұрын
The results would be dramatically different on lower frequencies. Think of what the pedal is doing. If you drive the whole spectrum hard it will eventually just be white noise unless you're carving out a more narrow band for the effect. And white noise kills the bass. That's all about human hearing and the difference between white noise and pink noise. The more noisy a bass synth gets the more it needs that low-pass filter. That's why the filter is the most important part of a bass synth. The more you distort a synth the more resonance you need on the filter to keep it from effectively amplifying the high frequencies. Point being, if you look at the spectrum you'll see that a lot of pedals kill the bass. Tube Screamers kill the bass. A Boss SD-1 is like a dirtier tube screamer, and being dirtier makes it kill even more of the bass. The EarthQuaker Plumes sounds better than most tube screamer clones on synths because they kept it from killing as much bass. But it's not as much fun cuz it's cleaner. A lot of fuzz pedals are really good on bass guitar or on a 303 because they have more legit tone control. Most Big Muffs will give you more of a heavy Cliff Burton bass sound. I mean a Morley will give you the actual Cliff Burton sound LOL. But the reason Cliff Burton's bass sounded so heavy was because he was basically treating his bass guitar like you treat a 303 - driving it really hard then using the Morley as a low-pass filter. I'm just saying that most of these circuits are designed for mid/upper guitar frequencies, and there aren't many people talking about what they do in the lower ranges. Most of them kill the sub-bass no matter how much you try to boost it with the tone control. But then there are pedals like the Boss OS-2 which sound amazing on a bass synth and actually make the bass thicker.
@Rollur12342 жыл бұрын
Thanks for covering the light on the gunslinger. It hit my eyes bad. I am still recovering. I will get through it though. I am wondering to where you route your pedals. To a mixer or some other preamp? When I route a pedal similar to the one you use in the video into a mixer it generates a feedback at a certain level. Is that level a setting you have to remember combining two elements to avoid feedbacking? Or am I getting feedback because I monitor both the source and the fx return in my mixer? Thanks. Great shows!
@JorbLovesGear2 жыл бұрын
Synth > Pedals > Mixer, into one channel. using it on an insert or something could lead to feedback.
@Rollur12342 жыл бұрын
@@JorbLovesGear i am getting a multieffect. Some cheap Korg AX300g. I just love to run sounds through these hardware effects. Even wav samples in the daw. So many variables. I come by some feedbacks as you mentioned but if I mute the monitor in the daw mixer I can get by without feedback there. Also my souncard is a Digitakt so when I mute the sample monitor there I can avoid feedback. I really want a new mixer. Just line mixer. Not much need of preamps with the synthesizer setups.
@aptudo2 жыл бұрын
Synths through drive cause bigtime beating/pulsing. It often sounds more like a telephone "dial tone" and less like, say, a driven guitar. Sometimes that's cool, but I'm always a bit disappointed that the effect isn't smoother and less digital sounding.
@hnryjmes2 жыл бұрын
if you run an FM E. Piano sound through a drive pedal can it do a "bark" sound with high velocity like a Rhodes does? unfortunately I don't have any pedals anymore to check!
@JorbLovesGear2 жыл бұрын
Certainly, with a dynamic patch, you can get some of the same feel of running an electric piano into an amp, breaking up on the hard hits. But, just because I'm geeky about it, and depending on what you're describing, that sort of really hard tine hit might be covered by a deep FM patch, or not covered in just a drive pedal.
@HOLLASOUNDS2 жыл бұрын
Drastically different sound if you play cords vs single notes. I have got a few Pedals to use with My sythersizors but I dont have the correct adaptors.
@JorbLovesGear2 жыл бұрын
Can be helped with a compressor, keeping the levels more stable, less dynamic.
@Yosser702 жыл бұрын
What about bass pedals? I’d assume they’d work well with drum machine’s and bass tones.
@JorbLovesGear2 жыл бұрын
Absolutely. Often bass specific pedals just have a different eq response or dry blend controls, they're great choices
@christiananderson7710 Жыл бұрын
Hey there, would you suggest an Empress Reverb or a Strymon Big Sky for use with Nord Lead 2x and Moog Grandmother? I don't plan on using the pedal for guitar. And I really don't like Spring reverb either. I also thought about a Mercury 7. But I really need guidance.
@christiananderson7710 Жыл бұрын
Or even an Eventide Space, lol
@JorbLovesGear Жыл бұрын
either would be excellent, but empress is a lot simpler to use, if you ask me. I have a full video on it.
@seanporter28292 жыл бұрын
random question: what kind of glasses are those? i like em
@JorbLovesGear2 жыл бұрын
Eyebuydirect! Model is St Michael
@JohnnyTakeAll Жыл бұрын
What oscilloscope do you use?
@MrMarcLaflamme2 жыл бұрын
have you heard the Plasma Drive on a synth yet? Sooo much dirt!
@JorbLovesGear2 жыл бұрын
Oh yeah, super sick. And the eurorack module even! So dope./
@joydrive_2 жыл бұрын
What synth is this?
@JorbLovesGear2 жыл бұрын
Nord lead 2! I mention it in the beginning I think
@percussionboy43572 жыл бұрын
I know you didn’t make this video to cause me to buy a Blues Driver, but … well…
@JorbLovesGear2 жыл бұрын
Lmao, thats the only reason I did it. I want a stereo BD2, just for synths
@asdfjkl2274 ай бұрын
How long are you going to ramble before you start the video?
@JorbLovesGear4 ай бұрын
There's chapters, skip ahead
@triplebeam232 жыл бұрын
i have a question soo im in the market for guitar effect pedals to run my software synths through .. ive never been a huge fan of hard overdrive and heavy distortion sounds .. but i love saturation.. i know weird right? but ive been specifically looking at chase bliss audio vinyl warped.. im definitely going to be picking up that unit when im not so poor.. but im wondering have you had any experience with these types of units? and or know of a cheaper alternatives that are just as good.. the thing sounds amazing but $350 .. god thats gonna hurt for something so specific.
@stoatystoat1742 жыл бұрын
🥁🎸🎹🤗
@hdjsos2 жыл бұрын
Jorb have you ever considered doing OnlyFans?
@coolguy27832 жыл бұрын
OnlySynths when
@JorbLovesGear2 жыл бұрын
Who said I wasn't there already? Have you looked?
@HOLLASOUNDS2 жыл бұрын
@@JorbLovesGear Long hair fetish is big on there lol.
@jonathanmcgregor62972 жыл бұрын
"baseless guitar man adjectives" 😂
@JorbLovesGear2 жыл бұрын
😅😅 not a dig, good folks are out there. Only, there are some wack adjectives floating around guitar-pedal discourse. lol
@jonathanmcgregor62972 жыл бұрын
@@JorbLovesGear Oh it was received in that spirit, don't worry!
@mhmrules2 ай бұрын
Man, I should just get an Arp 2600 and a Blues Driver and just set that up at a rave and watch what happens.
@JorbLovesGear2 ай бұрын
people would love it
@JosephElsherbini2 жыл бұрын
Did you catch Crumb's KEXP performance? I feel like their gear sensibilities and yours are very similar.
@JorbLovesGear2 жыл бұрын
I haven't but its on the list now!
@strykermoonfall2220 Жыл бұрын
You kick ass.
@zublits2 жыл бұрын
I love your playful and explorative vibe. Music is fun! I think we've all been guilty of taking it a little bit too seriously. Good stuff.
@JorbLovesGear2 жыл бұрын
Cheers, thank you!
@Maxi32425 ай бұрын
did you use a noise gate here? my blues driver is bascally unusable for high gain or high level settings... it has such a high noise floor :(
@HOLLASOUNDS2 жыл бұрын
14:10 Wow instant hard Techno.
@JorbLovesGear2 жыл бұрын
It really did work. lol
@decker58012 жыл бұрын
slingshot dakota rocks and they're the nicest people ever :')
@sandwich-breath2 жыл бұрын
Jorb, what are you using for the oscilloscope image? Thanks in advance!
@JorbLovesGear2 жыл бұрын
A hardware oscilloscope! B&K 1530.
@PorchBass2 жыл бұрын
A nice reminder that volume modulation can sound great and affect timbre . All too easy to forget in an overcompressed world.
@JorbLovesGear2 жыл бұрын
Indeed, just a little movement goes so far
@SomeOne-pd6vm2 жыл бұрын
volume modulation into distortion can sound great as well, since it'll affect how much your signal is clipping.