The Toothpick

[@dronereviewman9580]

HOLLY MOTHER OF F.P.V.!!!!!!! It flys so goooood!!!! I need one!!! You need to biuld and sell this amazing tiny quad!!! It rips ball's!!!!!!!!!!!!!!!!!! GREAT FLYING 👍😀👍 If not i might need 2 buy all that gear you listed and it will be my 1st build!!!

[@ken-kamm]

Great job, Bob. Honestly I think it’s great that you have a way to make some money from all your efforts at this point. You deserve it. You do a lot of testing and come to a lot of conclusions that other people don’t bother to spend the time to figure out. While, as a mechanical engineer, I sometimes cringe at some of the things you say even though you make it clear you’re just guessing (haha) I still think you have brought a lot of really good insight and knowledge to the FPV community and I hope you continue to do so by continuing to test many different things and many different combinations and figure out what actually works, no hype, and no BS. Kudos.

[@Kabab]

Thank you. I try. I guess. I try not to guess too much :-D

[@tehllama42]

@@Kabab Yup. Keeping stuff in stock is going to be the real struggle.

[@fpfree8821]

kenkamm Agreed. Well said.

[@jeffreyjuliano2835]

I cringe every time someone tells me they are an engineer 😂

[@fpfree8821]

kenkamm kenkamm The penny just dropped. U commented on my comment to konasty the other day, thought hmmm, name seems familiar, but couldn't place it. Just now I agreed to your kabab comment, still didnt make the connection but had the same thought, name seemed familiar again but just couldn't place it. Just went to my YT comments page as I had an unrelated reply from someone else pop up, below that was your comment re konasty, penny dropped, same guy i just agreed with on this vid, you. Ok, just coincidence. BUT that's still not why your name seemed familiar. Well I'll be! Two words . Glyph shark. Bravo sir. BUT...........My brain remembered a name I didn't even realise I knew, from a 5 min vid over a year ago. WOW! I think maybe I have a tumour ;)

[@imkputtz]

You continue to improve this hobby. You're changing everything. Cheaper everything. Easier entry for beginners. Well done again.

[@Eric_from_Toronto]

Plenty of people are going to support your business, keep up the great work. Really helps noobs on budget to have all your testing input and affiliate links to tested components of your builds.

[@mathieuf.2788]

Wow, your philosophy behind this product is inspiring. I'm excited about your website as a resource and store, plus you packed this video with tons of information and awesome flight footage. Flossed more in the last two months than ever before!!!

[@sjcajw7]

It's funny seeing this come full circle. I got obsessed with micros about 2 or 3 years ago. After doing as much research and shopping around as I could, I ended up with some crappy 115mm 1.5mm carbon frame off Banggood, Racerstar 1103 10,000 kv motors, INDIVIDUAL 6a Racerstar ESCS (I don't think 4-in-1 ESCs were around yet), and the 65mmm KK props. BTW it's awesome you include the information about having to drill out your props to fit the 1.5mm shafts. I learned that the hard way after waiting 3 months for everything to arrive from China. I wanted a 2S setup, and bought some cheap 2S 350 mah batteries off Amazon. The AUW was around 70 grams (did not have camera/vtx. It was a LOS quad), and it flew okay. I was a little disappointed. My biggest complaint was the motors.They were cheap, rattly, and the shafts somehow popped through the bottom of the motor after pushing on too many props over the span of a few months. It's cool to see how much better the electronics are now, and I'm excited to try this setup again using "modern" technology....which I'm sure will be outdated in another 6 months :) Thanks for your hard work on the website. Looks great. I think I'm going to do the 1s configuration, mostly because I have a ton of 1s batteries and like the convenience of not having to balance charge haha

[@grahamjw75]

Have gotten into Micros lately and been flying 2inch models, the chunky 3s drop like a rock non floaty kind and this video has me pumped for my first toothpick frame coming in the mail. This is awesome stuff! great information, Thank you!

[@Kabab]

Right. It's nice to see people starting to realize the flying rock analogy.

[@Kabab]

www.KababFPV.com Component list review: goo.gl/KPidL5 Build guide: goo.gl/DQv4j9 KababFPV Facebook group: goo.gl/6XE1JG Frames will start shipping around Jan 30th. All parts of the site are a work in progress and will be updated with more information and details. The Build: Props: goo.gl/YuEogN Motors: Amax 1103 7500kv Camera/Vtx: goo.gl/xD8dQ6 FC/AIO: goo.gl/KeXqNa Frame: kababfpv.com/shop/frames/toot... Battery: Any 1S 450mah whoop battery Charger: goo.gl/mscCjzEquipment I highly recommend: Micro Eagle - goo.gl/or1fS9 Rush Tank Vtx - goo.gl/YMYmya Fantastic solder- amzn.to/2P5QM2W TS100 iron - goo.gl/DqBipa goo.gl/svK6DD amzn.to/2OV5XMh WaFL’s Cap Cap insta-stalker.com/profile/wafl.fpv/ goo.gl/9CZdAs Tips? PayPal: www.paypal.me/kababfpv Bitcoin: 1E4XZXoD4rS6MYWVWuenY7Kw2M1YgyNpoQ Nano: xrb_1188ek5bd7tb9kw67asnp9o65byuoaxbtpxuznx1ribf75x78awywmakj55f ETH: 0xD067F93811f2eC31CB1928901002dfdf9A492EF5 LTC: La2KWYAjp4VT2Lq2M76pbjzXWvRyjpfCtG

[@InvertFPV]

EPIC

[@killacovertops]

I only see 4 items on your site. 3 frames and the camera mount. Didn't you say you will have motors etc or did they sell out already? Or will they be coming soon? I really love the research and development you are doing here and the flight video from this absolutely amazed me. I want this setup so dang bad haha! Whats the STItCH?!

[@Kabab]

@@killacovertops more will come in time

[@damienkrohse3374]

With the Emax frame battery on top. What if you 3d printed the battery holder with a camera mount on top. Combining the bee brain and emax form factors. Would it add too much weight? Are you sold out already?

[@Kabab]

@@damienkrohse3374 yeah I don't think the toilet hawk is that great. Mainly because 1S is just really weak compared to 2S. It's not bad but after flying 2S, if you have any experience at all, you don't want 1S anymore

[@cutthenoisefpv7502]

Snagged a couple 3-hole frames. Looking forward to building! Fun because I already have most of the other parts I need!

[@zippycfpv3619]

I’m definitely ordering one when my auto check deposit hits on Friday!!!! You completely deserve any funds that your designing, research, and testing can bring you! Take care n stay in the air!!! 👍🏼😎

[@DutchRC]

*Complains about dogs..* over here the weather is grim / rainy and cold.. :P Great update sir! I AM interested in this.. Will have a look if I can get some friends together to order a bunch..

[@tylers1219]

can I just say... I think you are one of the best content creators on the internet.** As opposed to many, you are actually good at what you do; you put in the time, the work, and the research to present to your audience some of the most value packed videos around. There is no click bait, no bullshit, just videos that are valuable, and I leave feeling that my time was well spent. And on top of that you are not just putting out videos for the views and the money. You are working with companies, doing that research, and your own development to improve the hobby. You are the epitome of what a community member should be. With all that, I say, thank you. **(I do not know how to put into words; but looking at your content within a content niche, and comparing it to other niches and the content community as a whole, you know?)

[@Kabab]

Thank you. I really really appreciate the kind words. Even when I teach dental classes I don't dumb down any information. I talk to everyone as if I'm teaching myself at my own level. If they don't fully understand it, they will after they hear it a few times. I don't like to waste anyone's time, ever. This is also why I just cannot waste my own time reviewing everything under the sun randomly. I considered it after learning how much some of these other channels make but I already have a job and I'd hate my life if it was only reviewing random items....for China usually. What's really sad is that the 'fake media' stuff ends up getting far more attention. All I need to do is add 'game changer' to every title and my views will probably double :-D.

[@flightevolution8132]

I come back to watch this video once a month - just to marvel at the micro quad renaissance that we've experienced.

[@schnizzzla5407]

I have been watching all your toothpick videos and waiting for it to finally come out, although I already floss every day.

[@d3c0deFPV]

I was building similar things with the QX90 frames a couple years ago, with brushed motors. It was pretty crazy for 2016 on something that size, but even motors rated for 2S didn't last more than a couple hours worth of flight. The performance here with brushless is next level though.

[@MCsCreations]

Absolutely! 😃

[@OlmIsGay]

This thing is fenomenal ! You've been helping me alot whilst getting into this hobby and I will for sure try to build this one once I get better at flying FPV. As always, great video! You are a legend my man!

[@mrmikojo5738]

I'm really wanting one of these. You've really put something together that fits your flight style it's incredible.

[@rsharney1111]

smashed a few quads trying to fly like you. you can really rip dude. i love my 3' 4000kv baby hawk bi blade, they really fit my base criteria. long flight, long range, light weight, quiet, cheaper batteries, hd capability.

[@thetubemeister82]

Looks great. Keen to build one as soon as you have all the parts in stock.

[@caribbeanfpv2560]

I admire what you are doing. Very cool. I prefer ultra lights. Diatone 515 style with 1806 motors and 3S 850 lipos. 8 to 10 min flights. Now using canopy from new Diatone/Tmotors with small Mamba. And 5" biblades

[@Sh4pp0]

YES! I've been waiting patiently! I'll order one as soon as all the components are available on your website. Huge thanks for all the work and effort you've been putting in this project.

[@Tetra84]

your frame showed up in the mail today, looks quality! can't wait for the rest of the parts to show up and get this thing together!

[@Dangeresque14]

I ordered the 3 hole frame. Can't wait to start building and experimenting with parts!

[@JorgeJimenez2020]

Cool, thanks. I'll check out your website and maybe buy one of these toothpick quads and try it out. I'm enjoying my Eachine Trashcan, and hearing you say that this is so much better definitely has piqued my interest

[@simpai1585]

You should show the toothpick to every review Channel to get more traction because this thing has a lot of potential and especially that this whould be a perfect first safe simple quad with excellent performance. Love it. I NEED one :)

[@Kabab]

Yes I stood to make any significant amount of money from advertising or I would but at this point it's just sharing the fun

[@seanmetzger4780]

Glad you finally designed a website bob. We have been freeloading off you for far too long. Can’t wait for my toothpick. So stoked for it.

[@du4-fpv777]

Your flying has become pretty epic! You are sergical with your moves! That toothpick is sick!

[@matthew04101]

I just want to let you know I like the way you do business and appreciate all your hard work. you and your business should be the model for others to follow. I wish you start this a few months back, so I don't have to spend so much time trying to figure stuffs out. I have a few builds over rotorbuilds and i'll try to refer to you and your stuffs where I can, so more people would know.

[@scootroter4859]

Yeah, does everyone in the city have to own a dog? I like them too, but every neighbor next to me, below, across, everyone has a dog in an area with 6-8k sq. ft. Lots! So not much room for them... And most are very big and many have more than one. Sheesh! Lol Been looking forward to this video about the Toothpick! 👍😁

[@astn7278]

Take my damn money bob! Ordering my frame now, can’t wait for the motors and props to be available 👍🏻

[@carlosrossi4336]

Awesome, can't belive the way that little quad fly! Sure I will get one

[@Gosuminer]

It's been a while that something in FPV land made me stare in amazement like the Toothpick does. It looks like crazy fun. Good thing you opened a shop for it so people can stop posting "shut up and take my money!" ;-). Thank you for all your research and sharing your findings. I think this could become the craze of next spring.

[@EvPv]

YESS! Ive been waiting patiently to hear its available,and here we are! I Love watching your videos, its nice to know im not the only person that wants to understand things completely and asks all the questions nobody else seems to. Awesome work mister! Thank You

[@rabidbydesign]

Omg can't wait till everything arrives at my door! Thanks for the frame offering

[@frankbarajas]

Paused your video at 2 minutes in and just ordered the 3 hole ToothPick frame. I didn't want to miss out on this little beast. Can't wait to build it, fly it and probably crash it...a lot! This is awesome!!!

[@splineMerl]

Can't wait to fly like this dude. So smooth....

[@Kabab]

just takes some practice.

[@relentlessburrito]

Nice work! I want one. I want one bad.

[@StacemanFPV]

Going to be watching your site to keep up with this.. Wanting to build a small one, and this looks to really fit the bill.

[@HeadHproductions]

all i can say is thank you, iv been waiting for these toothpick frames to come out. iv jst ordered the hyperlite glide 5. congrats on the website, ill be visiting it alot buddy

[@brokemechanicfpv1420]

Toothpick is here! I hope you have a bunch of them

[@touchthesun2448]

DAMN! on 2s....that's insane. These things are coming out like a machine gun....you and Dangerous Dan are changing my mind about these smaller drones. My current favorite is a 3" Brat. I wanted to build an X-Class drone, but I could build 50-2S drones for the money! Thanks for all the information. I enjoy your reviews

[@mooosestang]

Oh man! Hearing you talk about the motor wires that are enamel coated extensions of the windings brought back so many bad memories. My first quad i built back in 2015 was the rotorx racing atom and i used their 1104 motors which have those same kind of wires. The rotorx racing props always flew nice though. The shafts on those 1104's bent way too easily and at the time the damn motors were as much or more than a 2204!

[@kapnmorganfpv5784]

Been waiting for the toothpick to be available to buy. Wanted to build one since your first video on it.

[@Wandrew6691]

Excited for your website and the products

[@someonespotatohmm9513]

It seems like we have a new class of quad copter, like the tinywhoop but for a similar purpose as 3 inch. The footage looks fantastic (some could confuse it with 5 inch quads) and if its not to expensive (which it looks like it won't be) I might need to keep some money aside to get one. Amazing work you might have created a real gem. edit: pls think about us international ppls. Would hate to not be able to get one or be forced to get a copy due to shipping bs. (I understand it can be an absolute pain though)

[@Terry12345]

Ordered one 3 hole and one 4 hole frame 😉. I have a set of Brotherhobby 0804 10000kv motors for the 1s version and a Mobula7 that will be canabilized for the build. The 2s build consists of only your frame so far. Man I'm excited to see these being offered. Thanks Kabab!

[@ponowai1]

Congrats on getting your site up. I'll pop in now and then. Great job on the tooth pick.

[@inellialp]

Really like these micro stuff you are doing! Never tought they could be so harmless and so ripping... please once you get all the parts in your store make a kit of the toothpick that ships with every part you need to build the toothpick 2s. I dont want to get anything wrong because i can hardly get them :( keep up the progress! Thanks a bunch!!

[@cccagley5276]

Good project and content. I have had very good luck with the iFlight 0804 motors (incl the wires!) On 1s ONLY. You are so right about them being inefficient on 2s. Best of luck. I think these small, efficient setups are cool.

[@b.w.oostdam8875]

Thank you Thank you for al hard work and research! I was still working with brushed to find similar flight performance after many paltforms and power combinations I recently decided to floow you path. Brushless is the only way to go!

[@timbenham516]

Will be ordering as soon as I get paid been waiting for this for a while for something like this

[@ericalauzon1687]

I picked up some Eachine QX90s and QX100s on ebay. I really like these smaller quads. Great flying btw.

[@unnamedchannel1237]

I feel for you man. You live in a beautiful place but if it's not the dogs its the lawn mowers.

[@Swooky]

Hi Kabab, your video's are amazing. You have a very different approach and in-depth view on this hobby which you can't really find in other reviewers. I have a few questions for you if you have some time to answer them for me :) - When are the Gemfan 1.5mm diameter props comming? Drilling out prop holes doesn't sound all that attractive of an option. :/ - When are is the Toothpick frame back instock? How is shipping to europe from your shop? Getting a good Toothpick-ish frame shipped to europe(within reasonable price) is currently quite difficult. - What's your opinion on the power of the TinyHawk? The TinyHawk seems a very fun but slightly underpowered. - Do you have any info on a 2s version of the TinyHawk?

[@michael7370]

I love this project! Great work on this. I've been looking into the exact same idea, these new brushless AIO boards with the receiver integrated have really opened up for ultra light but still punchy 1s quads. I'll be buying a frame or three 100% when they're in stock!

[@ptbuddha]

Hats off for the passionated people. Nice work!

[@andreapizzocaro998]

You're so professional man, one of the best on youtube, you so deserve many many more subs to your channel. Keep it up!

[@scottmarshall6766]

OK, you're going to make me work for it, I've had a cart full at Bangood since the last video waiting for frame and confirmation of what parts work. I really wanted a 200mw camera that works, or a cam and VTX, maybe you've discovered a 200mw combo that looks good and doesn't weigh a ton? This video only makes me want one (at least) of these "Holy Grail" flying machines (Whoop that flies like a 6"). I was hoping I could just gut my Mobula 7 and transplant it onto a Toothpick frame. Looks like it's homework time. This is going to be another project that will no longer be the correct/best setup when the parts finally all get here. If you an get a kit together down the road, I'd expect they will sell quite well. Need to get to work and figure out which frame to order. Thanks for moving forward on this and congrats on getting your own website put together. Looking good!

[@cooktfpv8226]

Just ordered ur frame brother. Looking forward to it. Keep up the awesome work man.

[@enderbean7862]

I'm excited to build this drone! When will the parts be back in stock? Thanks!

[@idrone5218]

However...you are one awesome pilot with these drones! Great channel and information, keep up the good work!

[@hipelyfefpv2820]

Yo that palm tree loop was epic! Nice job!

[@gypsypunkparty]

So I remember that you find the RC range for the crazybee f4 to be very poor, so would you suggest buying the non-receiver version? And I also wonder what you think about the vtx that comes on the Trashcan, I really like the idea of a 23-200mw switchable, and the ufl replaceable antenna.

[@Kabab]

I haven't yet put an external Rx on it but it'll definitely be a whole lot better. The trashcan vtx is good but unnecessary weight. It is very convenient however

[@vansoul2285]

Liked, subscribed and waiting to be able to order the whole set from you! Even though I ordered the trash can last week. Like your content and the focus on those very light

[@obskwadfpv3513]

I see lots of potential on this kind of frames, regarding things like new Canadian laws example, for you going to be stressful deal with logistics, resource parts, misstated orders, bad batches... etc, you named... but we appreciate a lot you strong effort to bring this innovated ideas to us, I just wish you good luck and ask you to never give up, this is future.

[@SmallsFPV]

This is exactly what I've been looking for! Thanks for setting up the website!

[@bragee]

Freakin' stable. Amazing tuning man. 👍👍👍

[@linelinelinelinep440]

purchased on the spot. was waiting for this to drop; totally stoked

[@skatj23]

I'm so glad you have made your own site. You have been the one person I have bee nbn inspired by the most since I have started. I hope 5in, 6in, 7in frames coming to your site as well? I would love to support your designs

[@hsinyen6942]

Dear Kabab, Thanks for the wonderful product. Can you make it easier for us to create two DIY package (frame, motor, fc, esc, camera, vtx, antenna, etc.): one for 1S (primary indoor) and one for 2S (primary outdoor). I'll like to buy both and follow your build and pid tune. Please let us know when and how to place orders. Cheers,

[@Kabab]

in time

[@pdtech4524]

Your drone piloting skills defy physics!! 😁😎👍💥

[@isaacabudleon4573]

Hi Kabab! I've been wanting to buy a micro brushless quad but I would like to know your recomendation, what should I get, a Flying Prius v2 with some 0803 motors or a regular 2" quad with 1103 motors?? Pls awnser 😭♥️ and great video....

[@Kabab]

well this video is all about what i've been working on so this is gonna be the best thing I've come up with.

[@hsinyen6942]

For us to buy whole package from you avoid sourcing, shipping and easy to deal with support. If you can accept pre-order, then it will help to forecast 1st batch inventory + cashflow. Hope you will be successful and continue guide us optimal drone for fun. Cheers,

[@Kabab]

yes, working on it. please feel free to standby while I work...

[@rapped1987]

KababFPV Hey Kabab! Any idea on when the whole package kit will be available to buy? Do you perhaps have a mailing list for it?

[@Kabab]

@@rapped1987 it will be at least a few months before we have all the custom parts even made and in stock enough to have a kit. We are heading there however

[@NicuIrimia]

Awesome flying and video! thank you. Have you tried using the standard wired headphones microphone for these recordings? I think they will cut a lot of background noise. Also I deal with enamel using a lighter. A few seconds on the flame makes wonders.

[@Kabab]

Ah I just got headphones with a mic too. Totally forgot

[@strawhatsam]

How would you characterize the perfance differences between the 1s toothpick vs the Tinyhawk? Is the difference huge? I would think you are getting better flight times, greater speed, better at handling wind, better control feel, and less washout when diving?

[@Kabab]

The difference between the actual original tinyhawk and the toothpick build? It's literally night and day difference. The tinyhawk is a whoop the toothpick is a full-blown racing quad

[@akirahinata9085]

Amazing. Love the toothpicks, I think I gotta have one

[@RobertHoffmann]

Congrats on your new site and store ..you definately deserve to make some money off of all the knowledge you've been sharing. Looking forward to your 2208 motors. Hope you make a 5s version :-)

[@Kabab]

You can run the same one on 5S too 🙌

[@RobertHoffmann]

@@Kabab I was thinking more as far as KV choices go. I know you like 1800KV on your 6s, but on 5s i guess 2000-2200 is probably more appropriate. I just got the hypetrain acros in 2207/2150KV version with 9x4x4 EZO bearings (not tested yet), i've been on emax 2306's for about 18 months now and really like them (rock solid & smooth). But i also like your motor theories and would definitely give a modern 2208 a try :-)

[@CesiumSalami]

HA! So this has now morphed into basically the same specs of a build i have and still fly from 2 YEARS ago. ~68g w/ 450mah 2s KK65 1103 8000kv (however it does have a full range RX and 200mw VTX :: brushes shoulder ::). However - that build required (at the time) a custom frame, a custom camera mount, chasing down the right drill bit and hand drill, soldering each of the tiny NOT 4in1 esc’s, using a battery with a connector no one uses and building a custom parallel board to charge it. It all took forever and was the biggest pain (but was fun). And it was worth it to have something safer for city use and just learning. I also only made it after burning a bunch of 5” quads to the ground and getting frustrated. Would’ve been so awesome if an easy solution like this was available which a huge part of what is so exciting here! So exciting to have safe(r), easy solutions with such performance for beginners or people that don’t want to zip around with a flying chainsaw in public places. Well done! and thanks for passing along heaps heaps and heaps of information. Can’t wait to try those AMAX’s. My OG racerstars sound like i’m dragging a broken grocery cart across a parking lot :)

[@WrongWayFPV]

I’m definitely jumping on this bandwagon!!! Such an awesome idea. I can’t wait to rip this

[@sidewinderam9m]

Looking forward to the expansion of the website. I really don't want to fuss around with trying different components. Just tell me what works best put it on your website and I will buy it.

[@casparharte]

Respect, you did it. I'll be on the website when I get home.

[@dirkpauwels1586]

Hi, I like your whoop build very much, sounds like a lot of fun. small question. On those aio boards the FRsky reciever is build with non-EU. As I live in belgium this not handy. I don't I can change the firmware on it?. Can I use an external xm+ on the craybee AIO? thx

[@Kabab]

Yes they'll take sbus in. Specifically the F4 variant

[@fpvkris6817]

That was beyond ripping, you got the skills ,wow , love you videos, I learn so much, 👍👍👍👍

[@rtsstream]

can i buy a toothpick frame anywhere? i saw you had them not available on your site for some reason but I dont need motors, im going to use 1102 motors off a mobula HD, let me know if you have a frame to sell , thanks

[@Kabab]

They're coming. I'm expecting delivery of a good number next week and then many more the week after

[@TiredFlyerFPV]

Damn. This looks fun. I can’t wait to build mine. Looking to order one soon after I train myself for indoor flying with a Eachine qx65. Unfortunately been a bit busy with building other kwads.

[@fromdarktolight6353]

Omg doc. You actually made a 1s flyin like a true 5 inch! Woooowww!

[@koalaguynerd6031]

Hell yeah I'll be picking one up this week if they don't sell out

[@Rich-TeaFPV]

Amaxinno are a great company, their frames are well priced and excellent quality. And as they're based in Germany delivery to the UK is quck and cheap. Thanks Bob 👍👍👍👍

[@jandomingo9806]

Where can i get thay camera mount? Im in Australia. Seems only newbeedrone sells them. Im only able to use 60mm props because im using mobula7 canopy and beta75x fc. But man i love this thing... defnitely feels close to a 5inch.

[@Kabab]

You're better off finding someone local to print you something.

[@rowanballinger3690]

How long till you start stocking motors camera etc on website? Be good to get everything from on place 😀 I want one now 😍

[@chadpeterson5723]

Great to see someone is trying to help change how it should be done. testing more testing before selling. I'm so sick of the stuff being thrown together with names that say it not even good. I see alot of gps drones that have app that don't work some don't even have the model in the app. Or not manuals. seems like it's more about numbers vs standards or quality workmanship goes out the door when it come to the companies over seas. Just not right wish people would stop buying from tell them to start making working good product. I hope to try yours soon but I think I will wait for the final motors . Can't wait to fly it

[@archer4922]

Very very very cool. I think I’m going to have to build one of these soon. Just had to buy a new used truck so I have to slow down on Fpv stuff now :-( but ima keep my kwadbox sub and that will get me thru. lol. I really can’t belive this small of a quad can move that well. It’s insane. Love it.

[@biggfpv2721]

I'll have one before long once all your stuff comes in on your site love all your stuff it's always been great and just got into whoops so can't wait to build this thing and give it a go

[@deltageek7177]

25.4mm is exactly 1 inch

[@Kabab]

lol, DUH. I'm so dumb....I hate the stupid english system

[@fpfree8821]

Huh? Why are the Chinese using American rulers?

[@TheWizardOfAhhz]

I literally had to scroll down and make sure someone commented this as soon as he said it lol

[@alanjones4747]

PCB measurement are in inches, 0.1 inch was standard hole spacing in PCB layouts of standard components.

[@alpemxyz]

@@alanjones4747 not for many smd parts tho

[@johncarold]

Hi Kabab I have a set of 8mm brushed motors and I had a bat-100 and I need a new Flight controller and esc's all in one. Can you suggest a good F.C and esc's board that can handle the 8mm motors , OSD, Thanks for the info.

[@Kabab]

Brushed you mean? There are tons of brushed FCs. Just choose one that fits whatever frame you're using. They're all about the same.

[@johncarold]

@@Kabab K Thanks I wasn't sure about the wattage on them compared to a 4 mm or if they would just burn them up. Keep them coming.

[@Kabab]

@@johncarold things that small are all pretty similar. They don't really distinguish the power requirements on just 1s

[@markiemark7018]

I think more people should try AMAXinno stuff. They have such quality motors for a low price

[@yannickg6904]

I agree completely. The secret is already out in Europe, from what I heard, it's a really popular brand over there. I have two builds that use the Freestyle 3e frames and I love them, they're essentially baby QAV-Rs for 16usd.

[@markiemark7018]

Yannick G so true! I can‘t wait to get the new 2207.5 Motor. Also their 2305 2550kv is the most powerful 2305 on the market and easily competes with my Other 2306 motors

[@yannickg6904]

@@markiemark7018 I really want to try their 1407s now that they are available again. The 3100kv can spin 4in and 5in props. I was thinking of combining them with the Nano 5e frame for a 5in build under 250g auw.

[@markiemark7018]

Yannick G that‘s a good idea

[@yannickg6904]

@@markiemark7018 The hyperlite motors were once available at 2722kv, but they've been out of stock for ages. There's also the new Hobbywing Xrotor 1408-2400kv that's really interesting. Combined with the Nano 5e frame, I think it would have an amazing power to weigth ratio. Really out of topic for Kabab's video, but I could talk builds all day, lol.

[@icarusix8750]

Thanks for the vid! Have you done wing stuff? Opinions?

[@Kabab]

Unfortunately I live in an area where wing stuff isn't really easy to do. Can't fly wings in cities too easily.

[@icarusix8750]

@@Kabab fair enough, though its a shame.. the micro inav 0804motor wings are worth a look still imo

[@rawpicsfpv3516]

Hey Bob, will the shipping from your website cost about the same and will it take about the same time to ship to germany, compared to for example bangood? I really like what you are doing here. You make it all right! The website is fantastic, the content is awesome, you knowledge and effort you put into this are impressive as well. You deserve every bit atention you get and even more. Thank you!!!

[@Kabab]

Please hold off on ordering from Europe. It's too stupid right now. Working on ot

[@rawpicsfpv3516]

@@Kabab OK, i will. Just really wanna Support you... How will i know that it's not "stupid" anyomore? Don't want to wait tooooo Long (No pressure;) Thx;)

[@FilipRadelic]

@@Kabab ordering anything to Europe from anywhere other than Europe itself is either too expensive or too slow, we're used to that, don't worry too much. But if you really can get us better shipping deals we won't mind :)

[@RcReviewsLt]

Caddix EOS2 has 4:3 version with NTSC and PAL, it works fine, and quality is ok, lens can be swapped.

[@Kabab]

But the jello is still awful

[@ungroundedpilot]

Thanks a lot for all the great videos, I've been watching every one lately! You may have answered this already but I have another micro and am often finding myself stuck in the trees as it's so light. I am considering switching prop direction from inward to the front to outward from the front. Which way do you spin your props, have you found this to be effective and do you have any other tips to minimize tree climbs besides the obvious of not getting into them?

[@Kabab]

unfortunately these micro motors don't have enough power usually to effectively dislodge things from trees. Prop rotation out is just to keep crap off the FPV lens...

[@ungroundedpilot]

@@Kabab This guy seems to think the reverse direction on props makes a big difference in terms of getting stuck in trees: kzbin.info/www/bejne/gnvSm2Cdr8ijp6s I have yet to try it as I'm on travels and my quad needs repair (incidentally from a tree fail) but wanted your opinion. Thanks for replying!