The Ultimate 2007-2018 Jeep Wrangler Radio Upgrade - Using Heigh10 With Carplay And Android Auto

Learn to remove the dash and install a new radio display in any Jeep Wrangler JK (2007-2018). Like this install? What do you think of the 10-inch screen in the Wrangler? Have any questions for our Install Experts? Let us know if you have any questions in the comments below! The Jeep Wrangler radio kit linked below.
*UPDATE*
Depending on the harness version, the Speed Sense wire may be blue or pink, and the Reverse wire may be green with a white stripe or purple. Please refer to the product installation manual for details.
🕰 Powering Options Timestamps
Step 1: Disassembly - 1:02
Step 2: Wiring - 4:20
Step 3: Radio Assembly - 11:02
Step 4: Dash Kit Assembly - 13:15
Step 5: USB Port Install - 13:42
Step 6: Replace HVAC - 15:35
Step 7: Mount GPS Antenna - 16:22
Step 8: Installation - 17:35
Step 9: Reassembly - 19:58
Products Used:
Jeep Wrangler JK (2007-2018) Complete Stereo Replacement Kit (Jeep Wrangler Radio Upgrade)
Learn More: bit.ly/3Oj039m
Who is Stinger Off-Road? We ARE the Jeep & Truck audio experts. With over 30 years in the industry, we are the must-stop destination to learn everything there is to know about fitting vehicles with the latest and greatest audio electronics. Whether you’re a novice or an expert, we help you update your vehicle with the best gear in the business. 🤘
Follow us around!
Website: bit.ly/3qyw9AF
Instagram: / stinger_offroad
Facebook: / stinger.offroad.electr...
Follow us for more videos!

[@StingerOffRoad]

Shop here: stingeroffroad.com/products/jeep-wrangler-jk-2010-radio-kit?KZbin&Organic+Video&Jeep

[@k20turbokid65]

The Stinger Heigh10 is such a wonderful head unit. It's equipped with so many useful features. Fantastic sound quality and excellent picture quality as well 👌

[@eskecc]

Thank goodness for this video, I had a wiring problem, but thanks to this video I was able to correct it, thanks again

[@StingerOffRoad]

Glad it helped

[@tellyjones2434]

@@StingerOffRoadQuestion…what’s the pink parking wire for ? I had something similar installed years ago the installer told me don’t use that feature because it won’t allow us to use the KZbin or Netflix feature unless the jeep parked. So is that the same thing?

[@StingerOffRoad]

@@tellyjones2434 For all technical questions, please contact our technical support department at 1-800-477-2267 EXT: 3333

[@ducatirottie]

Dude.....YOU ROCK!!!💪🏽👍🏾🙏🏽👌🏾

[@joshuachisley6444]

Great easy instructions. Couldn’t mess it up if you tried!!

[@815s_Decal_Dude]

Great video! The HEIGH10 definitely brings the lame JK dash to life!

[@BlackFlagAdventure]

Just installed on my JLU we love it!

[@gnanamanihooyman3069]

Got installed last week! Looks great and works well!

[@the-bu3lb]

What about the. Glare ? I drive with my top off 98% of the time. What about glare dirt dust ? Is it slow responsive fast. What did you find works well and lacks in other areas ?

[@Ahunter21]

Love these products!

[@justa.jeepin4376]

That screen tho 😍 it’s a must for my jeep!

[@themcdermottfamilyfarmdesi5879]

Great tutorial on this radio

[@krazykroenke]

Love this!!

[@chriswhite4596]

Nice job Kyle

[@KingElvisPresley1]

I need to buy one!

[@joseprin3804]

I have not a jeep or radio but I like the video lol so nice

[@saimnadeem7507]

Perfect instructions

[@BigM22]

Its a pity they are not available in the UK , Great video

[@StingerOffRoad]

I was told that customers in the UK can order this kit on websites like eBay. Since eBay has fulfillment processes, they can ship internationally. It may take a bit, but from what I hear, you can get this across the pond, if you really fancy one. Cheers and thanks for the support!

[@4x4-experts]

would be a great thing if you will choose the axxes chto10 adapter to remain the factory fading system. With the pacmodule the fader isnt working anymore. The Radio would be great but only with an native android system on it.

[@user-bl5gq5pq2b]

Need to get one

[@keithfiola674]

Stinger does it again

[@joes_jeep]

Sweet upgrade for these dashes that are pretty lame when stock.

[@jonathanbaugher6051]

If that played dvds it be awesome

[@cmusic16]

hey buddy love the video can you let me know where you got that cutter crimper tool looks a lot better quality than mine

[@Opeokaythen]

Channellock Crimper. channellock.com/product/909/

[@mackdaddy1968]

Good video, some close ups of the wiring would make it easier. The harness that mine came with didn’t match on a couple. Thought I had bought one that was plug and play…. Works but didn’t realize it doesn’t have a camera either. Mine came with a rubber accordion neck sleeve that is just odd. Will enjoy it once I get it set up fully. Right now the carplay (main reason for getting it) ain’t working…. Vide was very helpful but I really should have just ponied up for the fully ready to go one.

[@maggiepup3377]

I have the Alpine i209. And this has a much better display. I also have the Alpine rear brake light with back up campers. Terrible display. Love the light. And additional back up light. This would have been a much better purchase.

[@kertiszman]

I have a 10’ seicane stereo that I installed on my 2013 Jeep Wrangler. It hasn’t work that great for me and customer service is next to impossible. I would like to try your stereo out. Looks like a cleaner design.

[@StingerOffRoad]

Sorry to hear about your other system. You can learn more about this exact kit we used in this install here! www.amazon.com/Stinger-2011-2018-Replacement-Touchscreen-Navigation/dp/B084KVNHC5/

[@lukedietrich5441]

Stinger Electronics Is everything shown in this video included in the Amazon kit?

[@StingerOffRoad]

@@lukedietrich5441 we don't include butt connectors as most have their own preference for making wiring connections -- everything else in the video is included in our Amazon kit! Please note we recommend solder to make wiring connections if you have the means, but we used butt connectors in this video to show ease-of-use.

[@virgilsmith5792]

@@StingerOffRoad I searched for this item as described on amazon on your website and it says it's for 2007-2010?

[@virgilsmith5792]

trying to see the difference in this and RB10JK11B..amazon says both fit the 2014 jk

[@rudypau]

Hi thank you for this informative video. My 2013 wrangler has Factory amplified sound system. When connecting the wires like you mention can I still use the fader and the subW?

[@StingerOffRoad]

All speakers, Including the subwoofer will continue to play, however you will not be able to fade the system or control the level of the subwoofer. The only radio that can do that is the factory radio.

[@leandroleiva1345]

thank you for the video, I noticed that you used a PAC radio interface is that the Rp4-ch11?

[@StingerOffRoad]

Yes, Leandro that is the RP4-CH11 wire harness. PAC is our sister company.

[@Tdaddy4T]

Would love to try it out. But out of stock forever

[@josepeinado9469]

hello. I really liked your video, thanks for sharing. I have a 2010 Jeep Wrangler unlimited sport. I don't have power windows. I want to know if the model you installed in the video fits my jeep? And if you can share me the model of the stereo. Thank you

[@StingerOffRoad]

The radio kit does not replace the entire front dash panel, it uses the existing one. So this kit will absolutely work in your Wrangler, even without factory power windows.

[@ghostsniper6713]

Since jeeps arent known for their road manners, how well does the screen hold up since it sticks out and isn't flush up against the dash? Does it wiggle around with bumps or is it always firm in place? Im interested in this, but do worry that going off road will weaken or loosen it.

[@StingerOffRoad]

The mounting bracket is sturdy. We have not had issues with the screen becoming loose in the Jeeps, even in off road situations.

[@jillmb2020]

What’s the difference between UN1810 model and the RB10jk11k? What mode are you wiring in this video?

[@csteffen63]

I had a couple questions, I may just call in tomorrow. I just purchased this from an authorized retailer. It did not come with the usb cords and adapter to replace the cigarette lighter. Not sure if this is an add on. The second question is the installation adapter they sent was ch1a-rsx. I’m assuming that’s correct, however the radio harness indicates the parking switch is a positive input while the radio interface indicates a negative parking output. Will this need a relay?

[@StingerOffRoad]

Hi Carrie, Go ahead and give us a call at 727-732-3114. We are here M-F 9am-5pm EST.

[@abbasfahmy1899]

This is is antiquated already ... and the wiring should already come ready to plug and play It's cumbersome compared to many very good aftermarket android head units.

[@ryry8533]

Is the radio easy to remove? I don't want to get this radio and have someone steal it because they can just pop out the radio when I take the doors off my jeep.

[@mircostocker6016]

thanks a lot! How do I know if my 2012 JK Rubi has a factory amplified sound system?

[@StingerOffRoad]

When you look at your vehicles harness you will only see 2 sets of speaker lines in the amplified system and 4 sets of speaker lines in the non-amplified. You can also look under the driver side dash next to the steering column and see if the amp is there.

[@kas5gd]

Can you go over the amplified wiring again? Like which wires do i need to connect?

[@StingerOffRoad]

The factory amplifier only accepts two channels of audio input (left and right). Connect the front outputs (white and white/black; gray and gray/black) of the aftermarket radio to the rear inputs (green and green/black; purple and purple/black) of the vehicle connector. This will allow navigation voice prompts and Bluetooth calls to be heard. The rear speaker outputs of the aftermarket radio are not used.

[@bmenecola7]

Looking at this unit for a 2016 Jeep Wrangler Unlimited with the Alpine sound package and its sub. Will this unit interface with the factory system, amplifier and subwoofer correctly? Many of the Asian units like the Desaita etc. seem to have issues where you lose fade control and other factory control. This could be a viable alternative to the Alpine Restyle if it functions correctly. Also how is VIM handled as I would hate to have to jam a lockpick unit etc. inside the tight space along with all the wiring from this unit. Thanks in advance.

[@StingerOffRoad]

This unit should work perfectly in your Wrangler! But if you have more specific questions, our Tech Experts can definitely answer all of your questions and concern. You can reach them here stingerelectronics.com/pages/contact-us

[@slesko13]

Purchased the Heigh10 w/out flush mount last month. Have the wire colors changed since this video was produced? Also some of my blue wires have metal attachments not shown here, and the wire colors I have aren't following the instructions given. Is there an updated install video?

[@StingerOffRoad]

There has been an update in the colors to this wiring harness. Please give our Tech Support Team a call at 727-732-3114 M-F 9am-5pm while we work on updating the info in the video.

[@barryvasquez]

Hey bro I just got the stinger its dope but you kinda went a different route . It would have been nice and time consuming if you broke down the wires . Like you dodmt mention the GPS wiring harness . I know it comes with a wiring diagram but still confusing. You applied the apple play but what about the android users for 1g I think you could have gone over that . One more. If a jeep does not come equipped with a the alpine sub kit what happens to the rest of us ? And if you dont connect the 2 USBs ports is that bad or os it optional? Please explain . Thanks bro

[@StingerOffRoad]

Thanks for the shout out! We think it's dope too :-) The USB ports are to retain the use of the original Jeep USB ports. If you do not use them, the original USB ports will not work. when you use the supplied USB cables, you can use the original ports for Android Auto, CarPlay, and music playback over USB (thumbdrive). The kit is compatible with Amplified and NON-Amplified jeep systems. You simply connect our plug in connector into our module in the correct port, They are labeled amplified, and non amplified. So we are good to go with any Jeep factory stereo setup. Sorry the GPS info wasn't clear. The GPS antenna does have a single blue plug in connector that plugs directly into the back of the control module or "brain".

[@fowerTwo]

When you turn on the veicle and put the rear gear how long it takes until it shows the rear camera on the display?

[@StingerOffRoad]

Hi Marco, It's a pretty quick process once the unit sees power on the reverse input it will switch over to the camera view.

[@ayoolujobi7466]

Please can you confirm if the back up camera has parking guidelines. I never get to see it in any of the videos

[@StingerOffRoad]

We offer cameras both with parking lines and without. We also have cameras with the dynamic (moving) parking lines. Check out the full lineup available from our sister company echomaster.com/

[@jessicamaccarone2322]

Looked at your website to get this but cant where could i buy this for my jeep☺️

[@StingerOffRoad]

We are currently selling them on a couple channels! We are available on Amazon but you can buy today from our partners at CarTeck Now! cartecknow.com/products/jeep-wrangler-jk-2011-2018-stereo-replacement-system-10-inch-touchscreen-radio-with-android-auto-apple-carplay-bluetooth-gps-navigation-dual-usb-ports-includes-dash-kit-interface

[@cleosara1420]

Is the screen water proof

[@johnhollis2565]

How well does this radio hold up to rain? Being in a Jeep radio is exposed to rain.

[@prioritizeyourpriorities3447]

Great question

[@de_41]

I currently have a pioneer 4200 nex I was hoping to replace with this Heigh10. My 4200 displays tpms info, when doors open, etc? Will the Heigh10 also do this? What is the limit for usb drives? I read somewhere 64GB. That seems low. When android phone is plugged in and using Apple Music, etc. does the display show the Artsit/song/etc? My pioneer does not.

[@StingerOffRoad]

Our JK kit does not feature any kind of gauges, the USB is limited to 64g and when using Android Auto you will get album information from your Apple music.

[@Jorge_moya]

Are you guys making one for the FJ Cruiser?

[@StingerOffRoad]

Not as of right now, but this could be installed in the FJ Cruiser. Give Tech Support a call and they can let you know what parts would be required for your vehicle. 727-732-3114 M-F 9am-5pm EST.

[@SartainSports]

Does this radio have an IP classification? Is the display screen easily removable, for when you have the doors off and top off?

[@StingerOffRoad]

Our unit does not have an IP rating. You can remove the screen if you were out with the top off.

[@deputydog35]

Can you play KZbin on this radio?? I can’t seem to figure it out. Plus my OS looks different than users... Does this unit allow KZbin play?

[@StingerOffRoad]

Hi there, you may need to update the radio firmware. You can do that by visiting here and clicking on the Firmware tab: stingerelectronics.com/products/heigh10. Regarding KZbin and video play, your radio has an HDMI port (HDMI cable sold separately). However, please check your local laws -- it is dangerous, and in most states illegal to watch video from the front seat of a moving vehicle.

[@sheepdawg23wm]

What cameras are needed for this head unit? Want to make sure I buy the right stuff.

[@StingerOffRoad]

The Heigh10 will take any cameras with a standard RCA connection. Check out our line up on our sister site echomaster.com/

[@erikfelix8874]

What about the microphone? Does it connect to the oem mic already in the Jeep?

[@StingerOffRoad]

The HEIGH10 display has a built-in microphone, and the kit includes an optional external microphone that you can mount higher up, on the A-pilar, or by the sun visor. Unfortunately all microphones have different specifications, and the original Jeep microphone is not the best configuration for our multimedia unit. This is why we provide a built-in mic, and an optional external. You can always connect the external mic, and swap between the two in the HEIGH10 menu, to see which gives you the best performance.

[@peter__p_a_n2563]

@Stinger Off-road two questions, does it support dab+ and do you ship to europe? Thanks

[@StingerOffRoad]

Unfortunately, it's a no on both of those.

[@malidaowd]

Can I connect an adaptor to read data from the car such as tire pressure or car error messages? thanks

[@StingerOffRoad]

Hello Mohamed, Currently the Heigh10 does not support that feature.

[@delaceybrown9538]

@8:19 in video you say “and on this other harness, where the camera inputs are, the speed wire is blue” Looks like you have the 10 pin harness in hand, which does NOT have a blue wire. There is a pink one that says “speed sensor” and has a plug on the end Also only has inputs for camera 2,3&4....is that pink wire the one I need to connect to the RP4-CH11 purple and white wire (VSS)?

[@delaceybrown9538]

Nevermind I found a video by Stinger Off-road that said what to do...

[@javierleon1844]

Can you send me the video

[@Summer4110]

Could an absolute beginner do this step by step video? Or is it best to find someone who can?

[@StingerOffRoad]

The connections in this kit are plug and play, so an absolute beginner could make them. The trickiest part is taking apart the jeep dash panels, without causing damage. The proper tools and techniques help avoid damage. Fitting the wiring into the dash is a bit snug, since the jeep does not have a lot of extra room behind it's original thin radio. But, by following the steps in the video people have been successful in installing this product themselves. There are a lot of professional installation shops out there, if you feel uncomfortable doing what is shown in the video.

[@shaynelhta]

I just installed the height 10 in my jk. Problem is that when I answer a call on Bluetooth or Android play, there is no sound through the jeep speakers. The Bluetooth plays music just fine, or radio. But no sound through speakers on a call. The people on the other end can hear me just fine. I switched internal/external mics, volumes, nothing gives...alot of money for the most important feature to not work. I'm very frustrated.

[@StingerOffRoad]

This is typically a symptom of having the factory amplifier and having it wired as though it is not amplified. Follow these wiring instructions: " Vehicles with a factory amplifier: The factory amplifier only accepts two channels of audio input (left and right). Connect the front outputs of the aftermarket radio to the rear inputs of the vehicle connector. This will allow navigation voice prompts and Bluetooth calls to be heard. The rear speaker outputs of the aftermarket radio are not used. Fading is not supported in this application. The factory amplifier’s fading is controlled by data communication from the factory radio. Neither the aftermarket radio or the RP interface have the ability to control the amplifier’s fader." If you have any questions you can reach us at 727-732-3114 M-F 9am - 7pm EST.

[@D3adaim84]

Does this have Rca ports so I can connect an after market amp to it so I can run subwoofers?

[@StingerOffRoad]

Yes, our Heigh10 has 3 sets of RCA outputs as well as a Toslink output.

[@abreeding06]

What is the difference between STH10JK and Heigh10 as it pertains to the Jeep Wrangler JK?

[@StingerOffRoad]

Hi Anthony, The STH10JK is the complete kit. It includes the Heigh10 infotainment system, the wire harness, antenna adapter and dash kit required to complete the installation.

[@the-bu3lb]

How much space is behind that screen ? Most of us Jeep owners that use our Jeep’s don’t have the roof on or doors so I’m gonna assume this isn’t water proof like alpine what do we have as owners of your radio to protect us from dust dirt light rain etc ?

[@StingerOffRoad]

The depth is adjustable so you can have right up against the dash or further out. The unit is not waterproof though.

[@drrckhamilton]

I am wondering if this unit requires that a bypass be used in order to access all of the available functionalities? Please help. Thanks

[@StingerOffRoad]

Hi Derrick, are you referring to the e-brake connection? That connection is provided in the wire harness and the unit does require the brake to be on to access certain features.

[@drrckhamilton]

@@StingerOffRoad Yes, thanks

[@stevengnasar2526]

Hey I’m having problems connecting the backup cam to the unit, and when it connects it says no signal but still goes into the camera tab when not in reverse. Does the fact it’s a stick shift affect the unit

[@toiletpapertheif7640]

Yes, the stick shift adds a completely new step to the process, you’ll need to search up another video for the wiring.

[@StingerOffRoad]

There can be some instances where the module doesn't produce the reverse signal on the manual transmission. You can contact Tech Support at 727-592-5991.

[@cowill8674]

Great info, Where can I order that USB port from

[@StingerOffRoad]

The part number is SSUSB2. Any local PAC Audio dealer should be able to order you one, or you could search online for a retailer that could ship you one. Hope this helps

[@jayrich7168]

Do i need a amplifier bypass to install subs and amp if i already have alpine factory amp

[@StingerOffRoad]

You will not need to bypass the factory Alpine system to add a subwoofer amplifier.

[@haroldjaochico7580]

Did you have any leftover cables that are not connected after wiring everything? Please help.

[@StingerOffRoad]

Hey Harold! Let me have you connect with our technical support team. Give them a call Monday-Friday 9AM - 8PM Eastern. They will be more than happy to help!

[@ryangajdos3580]

Anyone experiencing feedback/static on the other end when talking on the phone both through Apple CarPlay and the Stinger Bluetooth? Could this be a wiring issue?

[@StingerOffRoad]

Have you tired unpairing your phone and reconnecting it? Our Tech Support is available at 727-732-3114 to do troubleshooting.

[@chriswhite4596]

You didn’t Mention the BLUETOOTH Microphone

[@atruerock8020]

why does this kit work for 2007-2018 but other screen kits only work from 2011-2018? also.. some 2018's are JL so make sure people know if they have the jk or jl before ordering a head unit for a jk

[@StingerOffRoad]

The dash for the 2011-18 JK is different than the 2007-10 JK, which is why the RB10JK11B flush mount option will only work for the 2011-18 JK

[@itsawonderfulreallife6947]

can you access apple car play and your phone via BT or do your phone need to be plug into the USB cord? local stereo guy said that that it has to be plugged in but that seams weird...thanks in advance for the reply

[@israelolivas6970]

I would say 95% of Apple Carplay/ Android Auto stereos need to be wired. The remaining 5% that are actually wireless are really new in the market but need some sort of network support built into the car. But yeah, unfortunately that is how things are at the moment. I'm sure that more wireless stereos that support ACP/AA will be coming out in the near future.

[@StingerOffRoad]

Connecting into the USB port is required for CarPlay and Android Auto with the Stinger HEIGH10. It does not support wireless CarPlay and Android Auto. It does however support Bluetooth calling and audio streaming. So you can enjoy hands free calls and listen to your phone's music through your jeep's sound system, without being physically plugged into the USB port.

[@codilankford6173]

You get better sound quality with wired car play and charging.

[@PK-mi8lc]

Anyone else having issues with heated seats after install, possible grounding issue maybe?

[@StingerOffRoad]

Hi Paul, We haven't had issues with the heated seats after installing the HEIGH10 but please give our Tech Support a call at 727-592-5991 M-F, 9am-8pm EST and we can troubleshoot with you to figure out what is going on.

[@kenpappas9520]

Got anything to replace the 2024 with their new 12 inch display?

[@StingerOffRoad]

Nothing for the 2024 models yet.

[@johnstevensiv2063]

will this still fit if I have a vector off-road bar on my dash?

[@StingerOffRoad]

It really depends on how you have your Vector bar setup. The bar itself is fine because it comes to the edge of your dash and Heigh10 sits in front of the dash. However, depending on what you have on the bar you may need to make some adjustments so everything fits.

[@viviana3242]

do i need to connect the USB cable to apple car play directly to the back of the stereo with the dual USB port ?

[@StingerOffRoad]

Hi Julianna, the dual USB port will plug into the back of the Heigh10. Your standard iPhone cable will plug into the dual port.

[@viviana3242]

@@StingerOffRoad for carplay to work it needs to be connected with the USB cord correct?

[@coltenbrumfield481]

I have a 15 sport without a screen. Will this fit into my unit?

[@briannaritchie8506]

Yes it will fit I had the basic radio in my 15 wrangler unlimited sport. I love my heigh10 radio. It's a little bigger then I expected but its ok

[@StingerOffRoad]

Yes, absolutely!

[@randytellez7]

What if your jeep already has xm how do you plug

[@StingerOffRoad]

You will just need to purchase a PAC SAT-01 adapter to sync your factory XM antenna, or you can purchase the new SiriusXM SXV300 tuner for SiriusXM directly. If you use the SiriusXM tuner, you do not need to install the new antenna that comes with it, just have to install the adapter of the SXV300 to your factory antenna.

[@Oogcvtpoo]

Hi this come with the 4 cameras connectors or I have to get it separately?

[@StingerOffRoad]

You can connect 4 cameras to the Heigh10, no extra connectors needed!

[@caudi2377]

Do you have to connect the rear camera or will it auto detect?

[@StingerOffRoad]

The cameras we have on the website are all wired cameras and would require running the wiring through the Jeep and connecting it to the Heigh10.

[@malidaowd]

can I install an additional application(s) or software? thanks

[@StingerOffRoad]

Hello Mohamed, You are not able to load your own applications or software on this radio.

[@javierleon1844]

Steering wheel controls not working

[@tonys1006]

Does the kit come with a backup camera or is that sold sep?

[@StingerOffRoad]

The camera is sold separately. You can find it here stingeroffroad.com/collections/shop-by-jeep-model/products/spare-tire-backup-camera-for-wrangler-jk-2007-2018

[@eatsleepcarsrepeat4958]

What happens if you do not connect the speed sensor and parking brake wire?

[@StingerOffRoad]

The brake wire tells the unit when it is safe to view videos, without that connection you will not see anything on the screen from a video source. The speed sense wire can be used to trigger a front camera.

[@eatsleepcarsrepeat4958]

@@StingerOffRoad Thank you for clarifying that!. So if the brake wire was connected to something that had constant power it would think that it was parked all the time?

[@victorramos6088]

Will you be making one for 2007-2010 Jeep Jk’s?

[@StingerOffRoad]

Here is the setup we have for the JK stingeroffroad.com/collections/jeep/products/sth10jk

[@StingerOffRoad]

This kit actually covers the 2007-2012 check out our video for that install kzbin.info/www/bejne/qmbZdJyciamdlas

[@briannaritchie8506]

What about the navigation? I have the radio but what card do I need for it?

[@StingerOffRoad]

Hi Brianna, you'll need an iGo Navigation card specific for the Stinger radios. You can view the information here: stingerelectronics.com/products/igo-navigation-add-on-for-elev8-heigh10. You can purchase it at an authorized Stinger dealer, or contact us at [e-mail]. 😀

[@Sheepshit]

So can you not access your phones navigation through it?

[@alejandrobreton6491]

But then you need an interface to keep the wheel controllers?

[@StingerOffRoad]

This kit will retain your steering wheel controls.

[@350girlz]

@@StingerOffRoad Including the uconnect & phone buttons?

[@chrisgriggs8038]

What about a 2008 wrangler? The dash is quite a bit different

[@StingerOffRoad]

The link below shows the installation in a 2007-2010 JK. Hope this helps kzbin.info/www/bejne/qmbZdJyciamdlas

[@dustinnunley8802]

So is this radio waterproof for people who like to offroad? Would like it but not worth it if it's gonna break when I go offroad

[@StingerOffRoad]

It is not waterproof/IP rated, and should be treated like any other electronics installed in a vehicle.

[@dustinnunley8802]

@@StingerOffRoad ok thank you

[@jakefee9838]

Alright... Super frustrated here. I've spent all day scouring the internet trying to find the answer to my question. On Jeep JK's with the factory sub in the back, once installing a new head-unit with separate sub controls AND an entirely new sub/S(IN ADDITION) to the factory one, will I be able to adjust the factory sub's level on it's own? Or will it only adjust with the door speaker adjustments like factory? So after you installed this unit, could you adjust the factory sub separately? Or only generically..?

[@StingerOffRoad]

Unfortunately, there is no way to adjust the factory subwoofer level independently. There is no separate subwoofer level control capability in the factory amplifier.

[@jakefee9838]

@@StingerOffRoad That's pretty much what I figured. I just don't know why it was so hard to find out 100% for sure. Everything I've seen doesn't even mention it..

[@jakefee9838]

@@StingerOffRoad Thank you very much for the quick reply.

[@StingerOffRoad]

Happy to help

[@Sheepshit]

Do you keep your steering wheel controls with this?

[@StingerOffRoad]

Yes, our kit retains your steering wheel controls.

[@CookingWithOli]

What other integration kits are available for use with this stinger unit?

[@StingerOffRoad]

Our Heigh10 can be mounted in a wide variety vehicles. Give our Tech Support a call at 727-732-3114 M-F and we can see what options are available for your vehicle.

[@CookingWithOli]

@@StingerOffRoad thanks for letting me know

[@lizette8627]

They installed mine at best buy but they didn’t add the USB

[@Opeokaythen]

Did they know you wanted that done?

[@rakanbilbeisi5255]

I don't know why this video has cables manual connection green with white, while another video this manual wiring not required !!

[@StingerOffRoad]

The radio replacement package featured in this video is for the 2007-10 Wrangler JK models, and the parts included for these vehicles are not prewired like the harness for the 2011-18 JK models is. They are 2 different radio replacement packages for different years/applications.

[@Furrazii]

I got a 2 door 2013 wrangler but afraid I'll mess up the wires.

[@StingerOffRoad]

If you are not comfortable with the wiring portion of this install check our newest kit which features a plug and play harness: kzbin.info/www/bejne/aYHUdIagnZ6dd9E

[@Furrazii]

@@StingerOffRoad thanks. I'll definitely get this! It's alot easier

[@thekidjb1101]

Can this run a back up camera

[@StingerOffRoad]

Yes, it can actually display up to 4 cameras.

[@Shervinsworld]

Would this work for. 2003 wrangler ?

[@StingerOffRoad]

Unfortunately, we do not have a vehicle specific radio replacement package for those year Wranglers. However, you can visit a local Stinger dealer and have them pair the HEIGH10 UN1810 radio that is included with this kit, with the correct vehicle specific installation parts needed to install it in yours. The dealer locator is linked for you below. stingerelectronics.com/pages/store-locator

[@karmichael5427]

So can I access Google maps without a phone contacted to this system?

[@StingerOffRoad]

You will need to be plugged into the USB in order to use your Google maps.

[@barryvasquez]

And another one sorry It comes with a rubber sleeve is that optional ?

[@StingerOffRoad]

Barry, Yes the "rubber sleeve" is an accordian boot, it's designed to hide the two cables that connect the display to the "brain" of the HEIGH10. It it completely optional.

[@barryvasquez]

@@StingerOffRoad I have one complaint so far . I installed it been a ok tj it a few days . Everytime my phone gets synced with ot bluetooth wise the music starts and stops every 5 seconds you continually have to press play then all of a sudden it goes away can you please help

[@barryvasquez]

@@StingerOffRoad Thank you sir really appreciate your help I'm sorry if I came off as rude . I love my stinger its dope been getting alot of people who havent heard of that brand and they like it alot ! Thank you

[@beaulong3270]

Will this work for the 2021 Jeep Wrangler?

[@StingerOffRoad]

This kit is for the JK Wranglers, check out our JL Wrangler kit here stingeroffroad.com/collections/shop-by-jeep-model/products/rb10jw18b

[@kevinmedina7787]

Does this connect with the steering wheel?

[@StingerOffRoad]

Yes, it retains the factory steering wheel controls.

[@briannaritchie8506]

For the siriusxm what cord/antenna do I need for that?

[@StingerOffRoad]

This kit from SiriusXM has exactly what you need 👍 shop.siriusxm.com/siriusxm-sxv300-connect-vehicle-tuner.html

[@randytellez7]

What if your jeep already has the factory xm box?

[@briannaritchie8506]

@@randytellez7 I already had the factory siriusxm radio in my jeep. But when I bought this radio I had to buy the antenna and tuner. It's the one they posted works great!

[@mr.greenz6559]

Is it like a phone someone could use KZbin or apps on it?

[@StingerOffRoad]

You cannot add additional apps to the unit itself. You can use the Apps available through CarPlay or Android Auto. You can mirror a phone through the HDMI port from your phone when the vehicle isn't in motion for something like KZbin.

[@mr.greenz6559]

@@StingerOffRoad that sounds like a good deal. Can't wait to have one

[@seanhayden7151]

What do I need for satellite radio

[@StingerOffRoad]

Hello Sean, You will need the SiriusXM SXV300V1 tuner.