The Ultimate HOBBYWING ESC Tuning Guide - for no prep drag racing and on road / off road use.

Welcome to RC Street Wars, where speed meets precision! Today, we're thrilled to present "The Very Best HOBBYWING ESC Tuning Guide," a comprehensive and exciting journey into the world of electronic speed control tuning.
🔥 This guide is a game-changer for all RC enthusiasts, from the adrenaline-packed No Prep Drag Racing to the dynamic twists and turns of on and off-road racing. Thanks to our incredible partners, Exotek Racing and Hobbywing Technologies, we've got insider tips and expert techniques to supercharge your ESC performance.
🏁 What's Inside:
Deep Dive into HOBBYWING ESCs: Uncover the secrets of these powerhouse controllers.
Custom Tuning for No Prep Drag Racing: Get that explosive start and unbeatable straight-line speed.
On-road Racing Tactics: Precision tuning for handling those tight corners and high-speed stretches.
Off-road Mastery: Adapt your ESC for rugged terrains and unpredictable conditions.
Exclusive Insights from Exotek Racing & Hobbywing Technologies: Learn from the best in the business.
Step-by-Step Tutorials: Easy-to-follow instructions for both beginners and seasoned racers.
Troubleshooting Tips: Overcome common issues with ease.
🌟 Whether you're looking to gain that competitive edge or simply enhance your RC experience, this guide is your ticket to the next level. Don't forget to like, share, and subscribe for more awesome content from RC Street Wars. Rev up your engines, and let's dive into the world of expert ESC tuning!
🔔 Stay tuned for more updates and don't forget to hit the bell icon to get notified about our latest videos!
💌 Contact us at [e-mail] for personalized advice and join our community of speed enthusiasts!
"Fasten your seatbelts, and welcome to the ultimate RC tuning adventure!" 🏎💨

[@moulip]

Hi I'm not sure there's a more thorough video on the Hobbywing settings out there ! Many thanks for the work

[@RCstreetwars]

Glad you enjoyed it, please ask any questions you might have.

[@cwillis818]

Every time I try to download a file from the ota it freezes at 3%. I can’t figure it out

[@paulstanford3063]

Interesting. Having gone 2.2 with my HW XR10 pro , I've just installed the XR8 pro and I'm hoping it can deliver a lot more amps and get my Losi 22S to a flat 2 on a dry tire . I do like the throttle map using the OTA , similar to my R1 car . Thanks for the info .

[@RCstreetwars]

Hope you’re doing well, ask any questions you might have.

[@paulstanford3063]

@RCstreetwars I do indeed have a question ! I'm running the new large HW drag motor 3662 and I have installed an XR8 pro to run it , I was then told the XR8 pro won't supply turbo or boost timing to this motor ! Is this true ?

[@profix25lo]

on throttle rate: I personally always use 30 and try to reduce the agressivness of the motor with other settings (boost, softening, drive freq, timing). Because you need that quick power response. Throttle rate works with a bit of delay and i hate delay. I want the power when i need it. Especially while beeing in the air. This is true especially for 1/10th carpet/astro racing

[@RCstreetwars]

Awesome information, I definitely see that for 1/10 carpet/astro racing

[@manuel39164]

Asome Video How nows the Esc he run a 4 Pole Motor

[@awastyle9198]

How can i set my hw g2 xr8 pro to reduce the torque of my 1900kv on buggy 1/8? Thanks

[@RCstreetwars]

Use the softening valve and range, increase drive frequency or both

[@awastyle9198]

@@RCstreetwars now I have 30 soft range and 50 value, 20k pwm , throttle rate 15 but at the exit of the corner if i push the accelerator i have too much torque

[@RCstreetwars]

@@awastyle9198 it sounds like you’re just going to have to take all of your torque reduction tools and set them at the points that produce minimum torque and adjust from there. This includes throttle rate control. Make sure you have your smoothing range and smoothing value set to maximum, I do not recommend any more than 24K PWM.

[@awastyle9198]

@@RCstreetwars OK, thanks a lot. you have to adjust the accelerator in every corner to make it accelerate well and not slip. it becomes difficult to be constant on the lap. Throttle curve or speed on radio control can Help?

[@darylleonard8639]

Will the data logger work on an rtr drag slash?

[@RCstreetwars]

Yes, if you have the HOBBYWING Esc and the OTA on your Drag Slash.