The ULTIMATE NAPA compressor Part 1: Modification

[@theschultz-ster]

Here is the link to the wiring side of things. Check this one out kzbin.info/www/bejne/iH20n6B_aLGrfdU

[@frankfiorenini1282]

Thanks brother! Much appreciated, this is perfect!

[@theschultz-ster]

@@frankfiorenini1282 so glad it helped.

[@sakibafunny4207]

This NAPA Air Compressor is the perfect accessory for 4WDing, maintaining your ride-on mower, boat trailer, camping, motorcycle and plenty more

[@iconplus7205]

Very helpful video. I loved this. I have gathered a lot of knowledge about this compressor. I need more videos like this. Thank you.

[@Fordgroup00]

Right on. One of the cleanest ones I’ve seen so far.

[@theschultz-ster]

Wow, thanks!

[@theschultz-ster]

Check this one out kzbin.info/www/bejne/iH20n6B_aLGrfdU

[@juelsheikh6651]

explaining so beautifully, hopefully, we will benefit from watching this video.

[@mogdhobd]

Awesome Video

[@theschultz-ster]

Thanks for the visit

[@md.imtiazulislamasif809]

Wonderful & amazing video post. The compressor is very powerful & Beneficial. Thanks for sharing this video. ❤❤❤

[@theschultz-ster]

Our pleasure!

[@online771]

Thank you so much for explaining so beautifully

[@theschultz-ster]

My pleasure 😊

[@project_poor_runner]

Hands down the best MaxiTrac mod video I’ve seen. Well done Brother!

[@theschultz-ster]

Thank you for that. I watched a lot of videos before making my own. Glad you liked it! Hope it was helpful with your build.

[@emotionukti4736]

Thank you for explaining so beautifully

[@theschultz-ster]

My pleasure 😊

[@footballshorts2995]

So nice and your video is cool ❤❤ and your video quality ❤❤

[@theschultz-ster]

Thank you so much 😄

[@relaxationandsoothingsound5227]

I have this same compressor. I will be ordering these parts and doing mine like this. Thank you for showing me how to do this!

[@theschultz-ster]

Glad I could help

[@Md.Mijanhosentuhin3012]

Marvels. Wonderfully beautiful in glorious sunshine. Very beautiful video. I want more videos like this.

[@theschultz-ster]

Thank you, I will

[@onlinework3991]

Informative and Halpful video.Thanks for sharing this video.

[@theschultz-ster]

Glad it was helpful!

[@delwarhussain376]

this compressor is really good, and thanks to you for the details

[@theschultz-ster]

You are welcome!

[@mahmudulhassanemon8433]

It’s really absolutely awesome content. I really enjoy it fully. Thanks for sharing

[@theschultz-ster]

Glad you enjoy it!

[@masudahmed9238]

This video is really helpful and important....

[@MicDubb78]

Love these kinda how too videos! Nice job!

[@theschultz-ster]

Glad you enjoyed!

[@Reelpeelingadventures]

That was a awesome invention of the mind

[@Taslimashopna-sg7cw]

Wonderful and helpful video. Good experience dad. Thank you.

[@theschultz-ster]

Our pleasure!

[@Aymanislam1]

Thanks so much for showing me how to do it.

[@theschultz-ster]

You are so welcome!

[@sam41988]

I saw a great video, I learned some good things through your video. Very good video. I want to see more videos like this. I am waiting for the next video.

[@theschultz-ster]

Ok, thank you. Check this one out kzbin.info/www/bejne/iH20n6B_aLGrfdU

[@priyanti_edits]

Good & effective information

[@theschultz-ster]

So nice of you

[@relaxationandsoothingsound5227]

You are very good at your craft!

[@theschultz-ster]

Thank you very much 🙏

[@rajbiswas2009]

Really amazing content ❤❤❤

[@entertainmentofficial9322]

This compressor is powerful. I used this video and making another compressor❤. Thank you so much ❤️

[@theschultz-ster]

You're welcome!

[@Tanvirzyan22]

Very helping video

[@theschultz-ster]

Glad it helped

[@MAJARFAKTS202]

Very nicely shown how to work on it and how to use it

[@theschultz-ster]

Glad it was helpful!

[@MdRubelAhmedSagor-bb4kt]

Very beautiful & helful video❤❤❤

[@theschultz-ster]

Thank you so much 😊

[@yamaha_r159]

Very amazing and very helpfully video

[@theschultz-ster]

Glad it was helpful!

[@injamamulHaque2x]

Thanks for shearing this information...i learn some new thing...😊

[@theschultz-ster]

My pleasure 😊

[@JobWorker-w2m]

Thank you brother for explaining so beautifully, hopefully, we will benefit from watching this video.😍😍🥰🥰

[@theschultz-ster]

So nice of you

[@sirikulislam150]

this is very helpful video thank you for this video ❤❤

[@theschultz-ster]

You're welcome 😊

[@user-Ashik4]

Wonderful and helpful video ❤

[@theschultz-ster]

Glad it was helpful!

[@cr7gam]

❤❤ wow.. So many beautiful video and also important information provided that video.❤❤❤❤ i love that vidoeo❤❤❤❤

[@theschultz-ster]

Thank you so much 😀

[@asadajmery3638]

Wonderful and helpful video

[@theschultz-ster]

Glad you think so!

[@shahingaming8885]

Womderful and helpful video❤

[@theschultz-ster]

Glad it was helpful!

[@MargaretD.Victoria]

very impressive content

[@robiulislamrobuil61]

Wow Really Amazing content

[@theschultz-ster]

I'm glad you like it

[@icony5600]

Amazing vlog video❤❤❤

[@theschultz-ster]

Glad you liked it!!

[@imranHasan-d9i]

this is helpful vide,, beautiful video ❤

[@theschultz-ster]

Glad you think so!

[@benandkristiesmith5545]

Modded mine with a pressure switch and coupler but trying a horizontal mount. The base plate can be moved from the bottom to the back with minor trimming of the bracket. Now I have a flat pump with the coupler and cut off switch facing the top but sideways. Going to try and fab it under the hood of my Bronco. Use the stock base and start from there

[@theschultz-ster]

You should do a video of it! I would love to see all the ideas people come up with these.

[@benandkristiesmith5545]

Not my cup of tea. Try swapping the base plate. Super easy and now not a top heavy beast on uneven ground.

[@mujibur_status_1M]

I really helped this video,, this video is must very helpfully,, Thanks for sharing this video this video i helped for my motorcycle comparesr repair tnq sir❤❤

[@theschultz-ster]

Glad it helped

[@mojartv7924]

Veri nich video good experiences boss thanks

[@theschultz-ster]

So nice of you

[@JoynabbibiShuma-en2ms]

Very helpful vedio

[@theschultz-ster]

Glad it helped

[@MahbubAlom-sw3gh]

Wonderful amazing video... Thakyou bro

[@theschultz-ster]

Glad you liked it

[@DipakBiswas-p3r]

This is amazing video 💗

[@theschultz-ster]

Thank you!!

[@Angelnowrin007]

Wonderful video✅✅✅

[@theschultz-ster]

Many thanks

[@ArafatRahman-j1m]

Very informative video ❤❤❤❤

[@theschultz-ster]

Glad you liked it

[@SabinaKhatun-k2m9j]

This compressor is powerful. I used this video and making another compressor❤. Thank you so much ❤😍🥰

[@theschultz-ster]

Great to hear!

[@softboy-bd]

Nice video❤

[@aharr25]

Very helpful video

[@theschultz-ster]

Glad it was helpful!

[@JumpLun]

Awesome video keep going

[@theschultz-ster]

Thanks! Will do!

[@Mohammadforid507]

Very good video I like this 👍

[@theschultz-ster]

Thanks for the visit

[@mdziaurrahman443]

This is amazing video 🎉

[@theschultz-ster]

Thank you!! 😁

[@arshiislam1234]

Vary helpful video

[@theschultz-ster]

Glad you think so!

[@sujonteamincomebangla6160]

This is amazing content video bro thanks you ❤❤❤❤❤❤

[@theschultz-ster]

My pleasure 😊

[@ryderklein395]

How to use it and how to get it to work and how is explained very nicely the problem is on your side

[@worldbestshortclip23]

I love your content take love from hart brother carry on❤

[@sopnaofficial21]

Ihave this same comprssor. Iwill be orderin these parts and donig mene like this,verry nice vidio..

[@theschultz-ster]

Great 👍

[@Gazi_mh]

relly amazig video video 😊

[@theschultz-ster]

Thank you so much 😀

[@nawabsanwalg7866]

Good

[@theschultz-ster]

Thanks

[@frankfiorenini1282]

Great video, any chance that you can explain exactly where the connections are made, I plan to cut the old panel out but get a little confused with the wiring to the pressure switch and relay. A scribbled diagram would even help, I am a visual learner.

[@theschultz-ster]

I will do a short video on just this topic over the weekend (time permitting) I will include a drawing of the connections. Thank you for watching, glad you enjoyed it. Stay tuned for more.

[@frankfiorenini1282]

Thank you! Best video I have seen with modding these compressors. Waiting for a part 2!!@@theschultz-ster

[@theschultz-ster]

Check this one out kzbin.info/www/bejne/iH20n6B_aLGrfdU

[@B_d.channeln]

Nice

[@theschultz-ster]

Thanks

[@mdsayedkh]

I have this same compreeaor❤

[@salcigar]

The video is great, and you do nice neat work. I couldn't see the detail of the electrical work. I'm afraid I don't know how you wired that relay. Do you have any plans to hard mount it, if so I look forward to that video.

[@theschultz-ster]

images.app.goo.gl/n3kczU2F4grENvyy7 87 and 30 are the Battery and pump connections and 86 and 85 are the trigger wires. One goes to ground and one goes to your switched power. Being DC it doesn't matter what side is what. The relay I used in this video, 87 and 30 are the big 8mm lugs and 86 and 85 look the same just in different locations on the relay and are the smaller connections. I DO plan on mounting it in the Jeep and adding a small air tank under the jeep too. Thank you for watching, glad you enjoyed it and found it helpful

[@salcigar]

@@theschultz-ster Thank you for the reply, I look forward to your next video.

[@theschultz-ster]

Check this one out kzbin.info/www/bejne/iH20n6B_aLGrfdU

[@djrojobbali1246]

Good day ❤

[@theschultz-ster]

You too!

[@Tasfiya482]

Good vedio bro go ahead🥰🥰🥰

[@theschultz-ster]

Thanks 🤗

[@JimHedlund]

Did you tap the airline output to 1/4" NPT or leave it at 1/8"

[@MdAbdulla-lk7hl]

অনেক সুন্দর ❤❤

[@theschultz-ster]

Here is part 3: The install. Go check it out kzbin.info/www/bejne/iIHCqoOFp7qapac

[@laikon2008]

Great video! Got one question. Why blow off valve is needed? To release the air after finish airup? Cant you just turn off the compressor and press the gun to do that?

[@theschultz-ster]

My thought process on this was every component of a big compressor but in the jeep. I will be installing a tank this will feed too. It was also something I had not seen yet done. I know these are cheap and I want to give it every chance at a long life.

[@theschultz-ster]

Thank you for the view!

[@Khrissicks]

Is the blow off valve necessary? I don’t see anyone else adding this.

[@MrRVRclubprez]

At 13:32 and 14:05 it appears you have the read valve plate on your right side reversed and installed wrong by 180 degrees?

[@theschultz-ster]

you are correct sir. I overlooked that when i took the heads off and was checking the unit out. I realized what I had done upon first start up and it was not compressing air. Thank you for the view and the keen eye.

[@davidl766]

Could you please test how long it takes to get to 55 psi ? I run more pressure on the street in my suburban.

[@theschultz-ster]

One of these days when I'm not working all the time. August is a very busy month for me this year.

[@ronnieshaban3170]

Where did you connect the thermal wire off the motor to?

[@theschultz-ster]

I left it unconnected. I dont run it long at any one time.

[@letzgow6110]

If you have it installed and the unit still doesn’t turn off, does this mean there is a leak and it can’t get the spec pressure?

[@theschultz-ster]

yes. spray some soap and water on your connections to find the leak. It will blow bubbles

[@adventure_next6869]

What did you use to seal all the ports?

[@theschultz-ster]

thread tape, so far so good.

[@adventure_next6869]

What size of drill bit and tap did you use? I may have missed it

[@theschultz-ster]

1/4" NTP tap and drill bit

[@adventure_next6869]

@@theschultz-ster one again..thanks dude!

[@adventure_next6869]

@@theschultz-ster are you sure it's 1/4. Parts listed have a 1/8 thread.

[@theschultz-ster]

@@adventure_next6869 I don't remember off the top of my head I'd have to go back and watch the install video.

[@IronMountainPlumbing]

How’s it working out? I want to delete my board. It’s in the way big time.

[@theschultz-ster]

It works perfectly! Here is how I did the wiring kzbin.info/www/bejne/iH20n6B_aLGrfdU

[@FrankFiorenini]

So I wired it and when I tried to run it, it runs for a second then cuts off, then runs, then cuts off until I disconnect it. Any thoughts on what I am doing wrong?

[@theschultz-ster]

is there a pressure switch? If so it sounds like a leak. It will runup to pressure, shut off, Then as the air leaks out and pressure drops, It will turn back on. Just guessing?

[@FrankFiorenini]

Pressure switch is on, but i had trouble tapping for everything and am sure that I cross threaded one of them. I may need to pull and re tap them. @@theschultz-ster

[@theschultz-ster]

Maybe add thread tape too? Just ideas.

[@theschultz-ster]

Let it run. Put your ear near the areas you tapped, listen for air leaking out. You maybe able to hear it.

[@theschultz-ster]

Take the plastic off. Put soap and water in a spray bottle and spray it on your tapp points and look for bubbles. if you see any you have leaks.

[@aperson1181]

Why are you modifying it, can't you use it as is?

[@theschultz-ster]

You can for sure. My goal was a permanent install.

[@মোবাইলকম্পিউটারনেট]

This NAPA Air Compressor is the perfect accessory for 4WDing, maintaining your ride-on mower, boat trailer, camping, motorcycle and plenty more

[@abdullahallmamun15]

I saw a great video, I learned some good things through your video. Very good video. I want to see more videos like this. I am waiting for the next video.

[@theschultz-ster]

Glad it was helpful! Check this one out kzbin.info/www/bejne/iH20n6B_aLGrfdU

[@Tanvirzyan22]

Very helping video

[@theschultz-ster]

Glad it helped

[@ummesumaiya6257]

Very helpful video

[@theschultz-ster]

Glad it was helpful!

[@MdRoniHossen-k4b]

This NAPA Air Compressor is the perfect accessory for 4WDing, maintaining your ride-on mower, boat trailer, camping, motorcycle and plenty more

[@itzgaming223]

Very helping video

[@theschultz-ster]

Glad it helped